You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I noticed that the Slicer get's very confused when dealing with single perimeter bridges, i made a simple model that shows the problem, here's a gif of how the layer containing the bridge is currently printed:
Here you see that first one pole is printed, then the bridge is printed in the wrong direction (it starts in mid air) and then the final pole is printed. This leads to a failed print and this print would work perfectly if printed in the right order.
This is with the Arachne Perimeter Generator. With Classic Perimeter Generator the bridge is printed before everything else, which is even worse.
Description of the bug
I noticed that the Slicer get's very confused when dealing with single perimeter bridges, i made a simple model that shows the problem, here's a gif of how the layer containing the bridge is currently printed:
Here you see that first one pole is printed, then the bridge is printed in the wrong direction (it starts in mid air) and then the final pole is printed. This leads to a failed print and this print would work perfectly if printed in the right order.
This is with the Arachne Perimeter Generator. With Classic Perimeter Generator the bridge is printed before everything else, which is even worse.
Project file & How to reproduce
Just slice the Example 3mf file
Example.zip
Checklist of files included above
Version of PrusaSlicer
2.6.0
Operating system
Windows 10
Printer model
varying
The text was updated successfully, but these errors were encountered: