We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
When slicing a cut-away of a tubular model there are extrusions significantly beyond the bounds of the original model.
This does not occur when using classic perimeter generation. I suspect this exposes a corner case.
Original model before slicing. Note the flatness of the cutaway wall:
Sliced output using Arachne:
Resliced with Classic perimeter generation for comparison:
Project file: Pressure Washer-HighPressureNozzle_cover2.3mf.zip
Version 2.5.0-alpha2+x64
macOS Monterey Version 12.4 (Intel)
Original Prusa MINI+ with 0.6mm nozzle
The text was updated successfully, but these errors were encountered:
Retested in Version 2.5.0-alpha3+x64, no change versus alpha2.
Sorry, something went wrong.
No branches or pull requests
Description of the bug
When slicing a cut-away of a tubular model there are extrusions significantly beyond the bounds of the original model.
This does not occur when using classic perimeter generation. I suspect this exposes a corner case.
Project file & How to reproduce
Screenshots
Original model before slicing. Note the flatness of the cutaway wall:
Sliced output using Arachne:
Resliced with Classic perimeter generation for comparison:
Project file
Project file: Pressure Washer-HighPressureNozzle_cover2.3mf.zip
Checklist of files included above
Version of PrusaSlicer
Version 2.5.0-alpha2+x64
Operating system
macOS Monterey Version 12.4 (Intel)
Printer model
Original Prusa MINI+ with 0.6mm nozzle
The text was updated successfully, but these errors were encountered: