Scale Bugs Out When Changing

[DakotaMcCutch]

Version: PrusaControl 0.9.4_215

When you change the scale by delete all the numbers and leave the percent sign (X). When you enter a number the other scale fields (Y/Z) will get set to be 9999% even if you only put in 1%(X) in the other fields.

Which causes one hell of a headache trying to fix the scale as well as Prusa Control locks up due to the scale being so large.

[prusa3d-bb]

Hello, Is the lock next to the X Y Z selected? This makes sure you scale evenly along all axes. Best regards, Jennes De Schutter Customer Support PRUSA Research +420 222 263 718 +421 220 570 305 Partyzánská 188/7a, 17000, Prague shop.prusa3D.com

…

--- original message --- On Mon, Nov 20, 2017 at 02:25 pm, <notifications@github.com> Dakota McCutcheon wrote: Version: PrusaControl 0.9.4_215 When you change the scale by delete all the numbers and leave the percent sign (X). When you enter a number the other scale fields (Y/Z) will get set to be 9999% even if you only put in 1%(X) in the other fields. Which causes one hell of a headache trying to fix the scale as well as Prusa Control locks up due to the scale being so large. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---

[DakotaMcCutch]

The lock is selected next to the XYZ. I always have to unselect it to fix the scale when it automatically changes the other two to be 99999% thats only if the program doesn't lock up.

I narrowed the issue down to be when one of the three is set to be zero in this case I wanted to change them all to be 200% so I deleted the 1 when the lock is enabled it will set the XY to be 99999%.

[prusa3d-bb]

Hello, I see the issue now. I will report this. Thank you. Best regards, Jennes De Schutter Customer Support PRUSA Research +420 222 263 718 +421 220 570 305 Partyzánská 188/7a, 17000, Prague shop.prusa3D.com

…

--- original message --- On Mon, Nov 20, 2017 at 03:08 pm, <notifications@github.com> Dakota McCutcheon wrote: The lock is selected next to the XYZ. I always have to unselect it to fix the scale when it automatically changes the other two to be 99999% thats only if the program doesn't lock up. I narrowed the issue down to be when one of the three is set to be zero in this case I wanted to change them all to be 200% so I deleted the 1 when the lock is enabled it will set the XY to be 99999%. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---