/
ahci-test.c
1972 lines (1658 loc) · 58.4 KB
/
ahci-test.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* AHCI test cases
*
* Copyright (c) 2014 John Snow <jsnow@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <getopt.h>
#include "libqtest.h"
#include "libqos/libqos-pc.h"
#include "libqos/ahci.h"
#include "libqos/pci-pc.h"
#include "qapi/qmp/qdict.h"
#include "qemu/host-utils.h"
#include "hw/pci/pci_ids.h"
#include "hw/pci/pci_regs.h"
/* TODO actually test the results and get rid of this */
#define qmp_discard_response(s, ...) qobject_unref(qtest_qmp(s, __VA_ARGS__))
/* Test images sizes in MB */
#define TEST_IMAGE_SIZE_MB_LARGE (200 * 1024)
#define TEST_IMAGE_SIZE_MB_SMALL 64
/*** Globals ***/
static char *tmp_path;
static char *debug_path;
static char *mig_socket;
static bool ahci_pedantic;
static const char *imgfmt;
static unsigned test_image_size_mb;
/*** Function Declarations ***/
static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port);
static void ahci_test_pci_spec(AHCIQState *ahci);
static void ahci_test_pci_caps(AHCIQState *ahci, uint16_t header,
uint8_t offset);
static void ahci_test_satacap(AHCIQState *ahci, uint8_t offset);
static void ahci_test_msicap(AHCIQState *ahci, uint8_t offset);
static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset);
/*** Utilities ***/
static uint64_t mb_to_sectors(uint64_t image_size_mb)
{
return (image_size_mb * 1024 * 1024) / AHCI_SECTOR_SIZE;
}
static void string_bswap16(uint16_t *s, size_t bytes)
{
g_assert_cmphex((bytes & 1), ==, 0);
bytes /= 2;
while (bytes--) {
*s = bswap16(*s);
s++;
}
}
/**
* Verify that the transfer did not corrupt our state at all.
*/
static void verify_state(AHCIQState *ahci, uint64_t hba_old)
{
int i, j;
uint32_t ahci_fingerprint;
uint64_t hba_base;
AHCICommandHeader cmd;
ahci_fingerprint = qpci_config_readl(ahci->dev, PCI_VENDOR_ID);
g_assert_cmphex(ahci_fingerprint, ==, ahci->fingerprint);
/* If we haven't initialized, this is as much as can be validated. */
if (!ahci->enabled) {
return;
}
hba_base = (uint64_t)qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5);
g_assert_cmphex(hba_base, ==, hba_old);
g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP), ==, ahci->cap);
g_assert_cmphex(ahci_rreg(ahci, AHCI_CAP2), ==, ahci->cap2);
for (i = 0; i < 32; i++) {
g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_FB), ==,
ahci->port[i].fb);
g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_CLB), ==,
ahci->port[i].clb);
for (j = 0; j < 32; j++) {
ahci_get_command_header(ahci, i, j, &cmd);
g_assert_cmphex(cmd.prdtl, ==, ahci->port[i].prdtl[j]);
g_assert_cmphex(cmd.ctba, ==, ahci->port[i].ctba[j]);
}
}
}
static void ahci_migrate(AHCIQState *from, AHCIQState *to, const char *uri)
{
QOSState *tmp = to->parent;
QPCIDevice *dev = to->dev;
char *uri_local = NULL;
uint64_t hba_old;
if (uri == NULL) {
uri_local = g_strdup_printf("%s%s", "unix:", mig_socket);
uri = uri_local;
}
hba_old = (uint64_t)qpci_config_readl(from->dev, PCI_BASE_ADDRESS_5);
/* context will be 'to' after completion. */
migrate(from->parent, to->parent, uri);
/* We'd like for the AHCIState objects to still point
* to information specific to its specific parent
* instance, but otherwise just inherit the new data. */
memcpy(to, from, sizeof(AHCIQState));
to->parent = tmp;
to->dev = dev;
tmp = from->parent;
dev = from->dev;
memset(from, 0x00, sizeof(AHCIQState));
from->parent = tmp;
from->dev = dev;
verify_state(to, hba_old);
g_free(uri_local);
}
/*** Test Setup & Teardown ***/
/**
* Start a Q35 machine and bookmark a handle to the AHCI device.
*/
static AHCIQState *ahci_vboot(const char *cli, va_list ap)
{
AHCIQState *s;
s = g_new0(AHCIQState, 1);
s->parent = qtest_pc_vboot(cli, ap);
alloc_set_flags(&s->parent->alloc, ALLOC_LEAK_ASSERT);
/* Verify that we have an AHCI device present. */
s->dev = get_ahci_device(s->parent->qts, &s->fingerprint);
return s;
}
/**
* Start a Q35 machine and bookmark a handle to the AHCI device.
*/
static AHCIQState *ahci_boot(const char *cli, ...)
{
AHCIQState *s;
va_list ap;
if (cli) {
va_start(ap, cli);
s = ahci_vboot(cli, ap);
va_end(ap);
} else {
cli = "-drive if=none,id=drive0,file=%s,cache=writeback,format=%s"
" -M q35 "
"-device ide-hd,drive=drive0 "
"-global ide-hd.serial=%s "
"-global ide-hd.ver=%s";
s = ahci_boot(cli, tmp_path, imgfmt, "testdisk", "version");
}
return s;
}
/**
* Clean up the PCI device, then terminate the QEMU instance.
*/
static void ahci_shutdown(AHCIQState *ahci)
{
QOSState *qs = ahci->parent;
ahci_clean_mem(ahci);
free_ahci_device(ahci->dev);
g_free(ahci);
qtest_shutdown(qs);
}
/**
* Boot and fully enable the HBA device.
* @see ahci_boot, ahci_pci_enable and ahci_hba_enable.
*/
static AHCIQState *ahci_boot_and_enable(const char *cli, ...)
{
AHCIQState *ahci;
va_list ap;
uint16_t buff[256];
uint8_t port;
uint8_t hello;
if (cli) {
va_start(ap, cli);
ahci = ahci_vboot(cli, ap);
va_end(ap);
} else {
ahci = ahci_boot(NULL);
}
ahci_pci_enable(ahci);
ahci_hba_enable(ahci);
/* Initialize test device */
port = ahci_port_select(ahci);
ahci_port_clear(ahci, port);
if (is_atapi(ahci, port)) {
hello = CMD_PACKET_ID;
} else {
hello = CMD_IDENTIFY;
}
ahci_io(ahci, port, hello, &buff, sizeof(buff), 0);
return ahci;
}
/*** Specification Adherence Tests ***/
/**
* Implementation for test_pci_spec. Ensures PCI configuration space is sane.
*/
static void ahci_test_pci_spec(AHCIQState *ahci)
{
uint8_t datab;
uint16_t data;
uint32_t datal;
/* Most of these bits should start cleared until we turn them on. */
data = qpci_config_readw(ahci->dev, PCI_COMMAND);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_MEMORY);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_MASTER);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_SPECIAL); /* Reserved */
ASSERT_BIT_CLEAR(data, PCI_COMMAND_VGA_PALETTE); /* Reserved */
ASSERT_BIT_CLEAR(data, PCI_COMMAND_PARITY);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_WAIT); /* Reserved */
ASSERT_BIT_CLEAR(data, PCI_COMMAND_SERR);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_FAST_BACK);
ASSERT_BIT_CLEAR(data, PCI_COMMAND_INTX_DISABLE);
ASSERT_BIT_CLEAR(data, 0xF800); /* Reserved */
data = qpci_config_readw(ahci->dev, PCI_STATUS);
ASSERT_BIT_CLEAR(data, 0x01 | 0x02 | 0x04); /* Reserved */
ASSERT_BIT_CLEAR(data, PCI_STATUS_INTERRUPT);
ASSERT_BIT_SET(data, PCI_STATUS_CAP_LIST); /* must be set */
ASSERT_BIT_CLEAR(data, PCI_STATUS_UDF); /* Reserved */
ASSERT_BIT_CLEAR(data, PCI_STATUS_PARITY);
ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_TARGET_ABORT);
ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_TARGET_ABORT);
ASSERT_BIT_CLEAR(data, PCI_STATUS_REC_MASTER_ABORT);
ASSERT_BIT_CLEAR(data, PCI_STATUS_SIG_SYSTEM_ERROR);
ASSERT_BIT_CLEAR(data, PCI_STATUS_DETECTED_PARITY);
/* RID occupies the low byte, CCs occupy the high three. */
datal = qpci_config_readl(ahci->dev, PCI_CLASS_REVISION);
if (ahci_pedantic) {
/* AHCI 1.3 specifies that at-boot, the RID should reset to 0x00,
* Though in practice this is likely seldom true. */
ASSERT_BIT_CLEAR(datal, 0xFF);
}
/* BCC *must* equal 0x01. */
g_assert_cmphex(PCI_BCC(datal), ==, 0x01);
if (PCI_SCC(datal) == 0x01) {
/* IDE */
ASSERT_BIT_SET(0x80000000, datal);
ASSERT_BIT_CLEAR(0x60000000, datal);
} else if (PCI_SCC(datal) == 0x04) {
/* RAID */
g_assert_cmphex(PCI_PI(datal), ==, 0);
} else if (PCI_SCC(datal) == 0x06) {
/* AHCI */
g_assert_cmphex(PCI_PI(datal), ==, 0x01);
} else {
g_assert_not_reached();
}
datab = qpci_config_readb(ahci->dev, PCI_CACHE_LINE_SIZE);
g_assert_cmphex(datab, ==, 0);
datab = qpci_config_readb(ahci->dev, PCI_LATENCY_TIMER);
g_assert_cmphex(datab, ==, 0);
/* Only the bottom 7 bits must be off. */
datab = qpci_config_readb(ahci->dev, PCI_HEADER_TYPE);
ASSERT_BIT_CLEAR(datab, 0x7F);
/* BIST is optional, but the low 7 bits must always start off regardless. */
datab = qpci_config_readb(ahci->dev, PCI_BIST);
ASSERT_BIT_CLEAR(datab, 0x7F);
/* BARS 0-4 do not have a boot spec, but ABAR/BAR5 must be clean. */
datal = qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5);
g_assert_cmphex(datal, ==, 0);
qpci_config_writel(ahci->dev, PCI_BASE_ADDRESS_5, 0xFFFFFFFF);
datal = qpci_config_readl(ahci->dev, PCI_BASE_ADDRESS_5);
/* ABAR must be 32-bit, memory mapped, non-prefetchable and
* must be >= 512 bytes. To that end, bits 0-8 must be off. */
ASSERT_BIT_CLEAR(datal, 0xFF);
/* Capability list MUST be present, */
datal = qpci_config_readl(ahci->dev, PCI_CAPABILITY_LIST);
/* But these bits are reserved. */
ASSERT_BIT_CLEAR(datal, ~0xFF);
g_assert_cmphex(datal, !=, 0);
/* Check specification adherence for capability extenstions. */
data = qpci_config_readw(ahci->dev, datal);
switch (ahci->fingerprint) {
case AHCI_INTEL_ICH9:
/* Intel ICH9 Family Datasheet 14.1.19 p.550 */
g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_MSI);
break;
default:
/* AHCI 1.3, Section 2.1.14 -- CAP must point to PMCAP. */
g_assert_cmphex((data & 0xFF), ==, PCI_CAP_ID_PM);
}
ahci_test_pci_caps(ahci, data, (uint8_t)datal);
/* Reserved. */
datal = qpci_config_readl(ahci->dev, PCI_CAPABILITY_LIST + 4);
g_assert_cmphex(datal, ==, 0);
/* IPIN might vary, but ILINE must be off. */
datab = qpci_config_readb(ahci->dev, PCI_INTERRUPT_LINE);
g_assert_cmphex(datab, ==, 0);
}
/**
* Test PCI capabilities for AHCI specification adherence.
*/
static void ahci_test_pci_caps(AHCIQState *ahci, uint16_t header,
uint8_t offset)
{
uint8_t cid = header & 0xFF;
uint8_t next = header >> 8;
g_test_message("CID: %02x; next: %02x", cid, next);
switch (cid) {
case PCI_CAP_ID_PM:
ahci_test_pmcap(ahci, offset);
break;
case PCI_CAP_ID_MSI:
ahci_test_msicap(ahci, offset);
break;
case PCI_CAP_ID_SATA:
ahci_test_satacap(ahci, offset);
break;
default:
g_test_message("Unknown CAP 0x%02x", cid);
}
if (next) {
ahci_test_pci_caps(ahci, qpci_config_readw(ahci->dev, next), next);
}
}
/**
* Test SATA PCI capabilitity for AHCI specification adherence.
*/
static void ahci_test_satacap(AHCIQState *ahci, uint8_t offset)
{
uint16_t dataw;
uint32_t datal;
g_test_message("Verifying SATACAP");
/* Assert that the SATACAP version is 1.0, And reserved bits are empty. */
dataw = qpci_config_readw(ahci->dev, offset + 2);
g_assert_cmphex(dataw, ==, 0x10);
/* Grab the SATACR1 register. */
datal = qpci_config_readw(ahci->dev, offset + 4);
switch (datal & 0x0F) {
case 0x04: /* BAR0 */
case 0x05: /* BAR1 */
case 0x06:
case 0x07:
case 0x08:
case 0x09: /* BAR5 */
case 0x0F: /* Immediately following SATACR1 in PCI config space. */
break;
default:
/* Invalid BARLOC for the Index Data Pair. */
g_assert_not_reached();
}
/* Reserved. */
g_assert_cmphex((datal >> 24), ==, 0x00);
}
/**
* Test MSI PCI capability for AHCI specification adherence.
*/
static void ahci_test_msicap(AHCIQState *ahci, uint8_t offset)
{
uint16_t dataw;
uint32_t datal;
g_test_message("Verifying MSICAP");
dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_FLAGS);
ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_ENABLE);
ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_QSIZE);
ASSERT_BIT_CLEAR(dataw, PCI_MSI_FLAGS_RESERVED);
datal = qpci_config_readl(ahci->dev, offset + PCI_MSI_ADDRESS_LO);
g_assert_cmphex(datal, ==, 0);
if (dataw & PCI_MSI_FLAGS_64BIT) {
g_test_message("MSICAP is 64bit");
datal = qpci_config_readl(ahci->dev, offset + PCI_MSI_ADDRESS_HI);
g_assert_cmphex(datal, ==, 0);
dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_DATA_64);
g_assert_cmphex(dataw, ==, 0);
} else {
g_test_message("MSICAP is 32bit");
dataw = qpci_config_readw(ahci->dev, offset + PCI_MSI_DATA_32);
g_assert_cmphex(dataw, ==, 0);
}
}
/**
* Test Power Management PCI capability for AHCI specification adherence.
*/
static void ahci_test_pmcap(AHCIQState *ahci, uint8_t offset)
{
uint16_t dataw;
g_test_message("Verifying PMCAP");
dataw = qpci_config_readw(ahci->dev, offset + PCI_PM_PMC);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_PME_CLOCK);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_RESERVED);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D1);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CAP_D2);
dataw = qpci_config_readw(ahci->dev, offset + PCI_PM_CTRL);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_STATE_MASK);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_RESERVED);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SEL_MASK);
ASSERT_BIT_CLEAR(dataw, PCI_PM_CTRL_DATA_SCALE_MASK);
}
static void ahci_test_hba_spec(AHCIQState *ahci)
{
unsigned i;
uint32_t reg;
uint32_t ports;
uint8_t nports_impl;
uint8_t maxports;
g_assert(ahci != NULL);
/*
* Note that the AHCI spec does expect the BIOS to set up a few things:
* CAP.SSS - Support for staggered spin-up (t/f)
* CAP.SMPS - Support for mechanical presence switches (t/f)
* PI - Ports Implemented (1-32)
* PxCMD.HPCP - Hot Plug Capable Port
* PxCMD.MPSP - Mechanical Presence Switch Present
* PxCMD.CPD - Cold Presence Detection support
*
* Additional items are touched if CAP.SSS is on, see AHCI 10.1.1 p.97:
* Foreach Port Implemented:
* -PxCMD.ST, PxCMD.CR, PxCMD.FRE, PxCMD.FR, PxSCTL.DET are 0
* -PxCLB/U and PxFB/U are set to valid regions in memory
* -PxSUD is set to 1.
* -PxSSTS.DET is polled for presence; if detected, we continue:
* -PxSERR is cleared with 1's.
* -If PxTFD.STS.BSY, PxTFD.STS.DRQ, and PxTFD.STS.ERR are all zero,
* the device is ready.
*/
/* 1 CAP - Capabilities Register */
ahci->cap = ahci_rreg(ahci, AHCI_CAP);
ASSERT_BIT_CLEAR(ahci->cap, AHCI_CAP_RESERVED);
/* 2 GHC - Global Host Control */
reg = ahci_rreg(ahci, AHCI_GHC);
ASSERT_BIT_CLEAR(reg, AHCI_GHC_HR);
ASSERT_BIT_CLEAR(reg, AHCI_GHC_IE);
ASSERT_BIT_CLEAR(reg, AHCI_GHC_MRSM);
if (BITSET(ahci->cap, AHCI_CAP_SAM)) {
g_test_message("Supports AHCI-Only Mode: GHC_AE is Read-Only.");
ASSERT_BIT_SET(reg, AHCI_GHC_AE);
} else {
g_test_message("Supports AHCI/Legacy mix.");
ASSERT_BIT_CLEAR(reg, AHCI_GHC_AE);
}
/* 3 IS - Interrupt Status */
reg = ahci_rreg(ahci, AHCI_IS);
g_assert_cmphex(reg, ==, 0);
/* 4 PI - Ports Implemented */
ports = ahci_rreg(ahci, AHCI_PI);
/* Ports Implemented must be non-zero. */
g_assert_cmphex(ports, !=, 0);
/* Ports Implemented must be <= Number of Ports. */
nports_impl = ctpopl(ports);
g_assert_cmpuint(((AHCI_CAP_NP & ahci->cap) + 1), >=, nports_impl);
/* Ports must be within the proper range. Given a mapping of SIZE,
* 256 bytes are used for global HBA control, and the rest is used
* for ports data, at 0x80 bytes each. */
g_assert_cmphex(ahci->barsize, >, 0);
maxports = (ahci->barsize - HBA_DATA_REGION_SIZE) / HBA_PORT_DATA_SIZE;
/* e.g, 30 ports for 4K of memory. (4096 - 256) / 128 = 30 */
g_assert_cmphex((reg >> maxports), ==, 0);
/* 5 AHCI Version */
reg = ahci_rreg(ahci, AHCI_VS);
switch (reg) {
case AHCI_VERSION_0_95:
case AHCI_VERSION_1_0:
case AHCI_VERSION_1_1:
case AHCI_VERSION_1_2:
case AHCI_VERSION_1_3:
break;
default:
g_assert_not_reached();
}
/* 6 Command Completion Coalescing Control: depends on CAP.CCCS. */
reg = ahci_rreg(ahci, AHCI_CCCCTL);
if (BITSET(ahci->cap, AHCI_CAP_CCCS)) {
ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_EN);
ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_RESERVED);
ASSERT_BIT_SET(reg, AHCI_CCCCTL_CC);
ASSERT_BIT_SET(reg, AHCI_CCCCTL_TV);
} else {
g_assert_cmphex(reg, ==, 0);
}
/* 7 CCC_PORTS */
reg = ahci_rreg(ahci, AHCI_CCCPORTS);
/* Must be zeroes initially regardless of CAP.CCCS */
g_assert_cmphex(reg, ==, 0);
/* 8 EM_LOC */
reg = ahci_rreg(ahci, AHCI_EMLOC);
if (BITCLR(ahci->cap, AHCI_CAP_EMS)) {
g_assert_cmphex(reg, ==, 0);
}
/* 9 EM_CTL */
reg = ahci_rreg(ahci, AHCI_EMCTL);
if (BITSET(ahci->cap, AHCI_CAP_EMS)) {
ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_STSMR);
ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLTM);
ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLRST);
ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_RESERVED);
} else {
g_assert_cmphex(reg, ==, 0);
}
/* 10 CAP2 -- Capabilities Extended */
ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2);
ASSERT_BIT_CLEAR(ahci->cap2, AHCI_CAP2_RESERVED);
/* 11 BOHC -- Bios/OS Handoff Control */
reg = ahci_rreg(ahci, AHCI_BOHC);
g_assert_cmphex(reg, ==, 0);
/* 12 -- 23: Reserved */
g_test_message("Verifying HBA reserved area is empty.");
for (i = AHCI_RESERVED; i < AHCI_NVMHCI; ++i) {
reg = ahci_rreg(ahci, i);
g_assert_cmphex(reg, ==, 0);
}
/* 24 -- 39: NVMHCI */
if (BITCLR(ahci->cap2, AHCI_CAP2_NVMP)) {
g_test_message("Verifying HBA/NVMHCI area is empty.");
for (i = AHCI_NVMHCI; i < AHCI_VENDOR; ++i) {
reg = ahci_rreg(ahci, i);
g_assert_cmphex(reg, ==, 0);
}
}
/* 40 -- 63: Vendor */
g_test_message("Verifying HBA/Vendor area is empty.");
for (i = AHCI_VENDOR; i < AHCI_PORTS; ++i) {
reg = ahci_rreg(ahci, i);
g_assert_cmphex(reg, ==, 0);
}
/* 64 -- XX: Port Space */
for (i = 0; ports || (i < maxports); ports >>= 1, ++i) {
if (BITSET(ports, 0x1)) {
g_test_message("Testing port %u for spec", i);
ahci_test_port_spec(ahci, i);
} else {
uint16_t j;
uint16_t low = AHCI_PORTS + (32 * i);
uint16_t high = AHCI_PORTS + (32 * (i + 1));
g_test_message("Asserting unimplemented port %u "
"(reg [%u-%u]) is empty.",
i, low, high - 1);
for (j = low; j < high; ++j) {
reg = ahci_rreg(ahci, j);
g_assert_cmphex(reg, ==, 0);
}
}
}
}
/**
* Test the memory space for one port for specification adherence.
*/
static void ahci_test_port_spec(AHCIQState *ahci, uint8_t port)
{
uint32_t reg;
unsigned i;
/* (0) CLB */
reg = ahci_px_rreg(ahci, port, AHCI_PX_CLB);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CLB_RESERVED);
/* (1) CLBU */
if (BITCLR(ahci->cap, AHCI_CAP_S64A)) {
reg = ahci_px_rreg(ahci, port, AHCI_PX_CLBU);
g_assert_cmphex(reg, ==, 0);
}
/* (2) FB */
reg = ahci_px_rreg(ahci, port, AHCI_PX_FB);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FB_RESERVED);
/* (3) FBU */
if (BITCLR(ahci->cap, AHCI_CAP_S64A)) {
reg = ahci_px_rreg(ahci, port, AHCI_PX_FBU);
g_assert_cmphex(reg, ==, 0);
}
/* (4) IS */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
g_assert_cmphex(reg, ==, 0);
/* (5) IE */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IE);
g_assert_cmphex(reg, ==, 0);
/* (6) CMD */
reg = ahci_px_rreg(ahci, port, AHCI_PX_CMD);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FRE);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_RESERVED);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CCS);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_PMA); /* And RW only if CAP.SPM */
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_APSTE); /* RW only if CAP2.APST */
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ATAPI);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_DLAE);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ALPE); /* RW only if CAP.SALP */
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ASP); /* RW only if CAP.SALP */
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_ICC);
/* If CPDetect support does not exist, CPState must be off. */
if (BITCLR(reg, AHCI_PX_CMD_CPD)) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CPS);
}
/* If MPSPresence is not set, MPSState must be off. */
if (BITCLR(reg, AHCI_PX_CMD_MPSP)) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS);
}
/* If we do not support MPS, MPSS and MPSP must be off. */
if (BITCLR(ahci->cap, AHCI_CAP_SMPS)) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSS);
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_MPSP);
}
/* If, via CPD or MPSP we detect a drive, HPCP must be on. */
if (BITANY(reg, AHCI_PX_CMD_CPD | AHCI_PX_CMD_MPSP)) {
ASSERT_BIT_SET(reg, AHCI_PX_CMD_HPCP);
}
/* HPCP and ESP cannot both be active. */
g_assert(!BITSET(reg, AHCI_PX_CMD_HPCP | AHCI_PX_CMD_ESP));
/* If CAP.FBSS is not set, FBSCP must not be set. */
if (BITCLR(ahci->cap, AHCI_CAP_FBSS)) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FBSCP);
}
/* (7) RESERVED */
reg = ahci_px_rreg(ahci, port, AHCI_PX_RES1);
g_assert_cmphex(reg, ==, 0);
/* (8) TFD */
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
/* At boot, prior to an FIS being received, the TFD register should be 0x7F,
* which breaks down as follows, as seen in AHCI 1.3 sec 3.3.8, p. 27. */
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS1);
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_DRQ);
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_CS2);
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY);
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_RESERVED);
/* (9) SIG */
/* Though AHCI specifies the boot value should be 0xFFFFFFFF,
* Even when GHC.ST is zero, the AHCI HBA may receive the initial
* D2H register FIS and update the signature asynchronously,
* so we cannot expect a value here. AHCI 1.3, sec 3.3.9, pp 27-28 */
/* (10) SSTS / SCR0: SStatus */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SSTS);
ASSERT_BIT_CLEAR(reg, AHCI_PX_SSTS_RESERVED);
/* Even though the register should be 0 at boot, it is asynchronous and
* prone to change, so we cannot test any well known value. */
/* (11) SCTL / SCR2: SControl */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SCTL);
g_assert_cmphex(reg, ==, 0);
/* (12) SERR / SCR1: SError */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR);
g_assert_cmphex(reg, ==, 0);
/* (13) SACT / SCR3: SActive */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT);
g_assert_cmphex(reg, ==, 0);
/* (14) CI */
reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
g_assert_cmphex(reg, ==, 0);
/* (15) SNTF */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SNTF);
g_assert_cmphex(reg, ==, 0);
/* (16) FBS */
reg = ahci_px_rreg(ahci, port, AHCI_PX_FBS);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_EN);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEC);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_SDE);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEV);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DWE);
ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_RESERVED);
if (BITSET(ahci->cap, AHCI_CAP_FBSS)) {
/* if Port-Multiplier FIS-based switching avail, ADO must >= 2 */
g_assert((reg & AHCI_PX_FBS_ADO) >> ctzl(AHCI_PX_FBS_ADO) >= 2);
}
/* [17 -- 27] RESERVED */
for (i = AHCI_PX_RES2; i < AHCI_PX_VS; ++i) {
reg = ahci_px_rreg(ahci, port, i);
g_assert_cmphex(reg, ==, 0);
}
/* [28 -- 31] Vendor-Specific */
for (i = AHCI_PX_VS; i < 32; ++i) {
reg = ahci_px_rreg(ahci, port, i);
if (reg) {
g_test_message("INFO: Vendor register %u non-empty", i);
}
}
}
/**
* Utilizing an initialized AHCI HBA, issue an IDENTIFY command to the first
* device we see, then read and check the response.
*/
static void ahci_test_identify(AHCIQState *ahci)
{
uint16_t buff[256];
unsigned px;
int rc;
uint16_t sect_size;
const size_t buffsize = 512;
g_assert(ahci != NULL);
/**
* This serves as a bit of a tutorial on AHCI device programming:
*
* (1) Create a data buffer for the IDENTIFY response to be sent to
* (2) Create a Command Table buffer, where we will store the
* command and PRDT (Physical Region Descriptor Table)
* (3) Construct an FIS host-to-device command structure, and write it to
* the top of the Command Table buffer.
* (4) Create one or more Physical Region Descriptors (PRDs) that describe
* a location in memory where data may be stored/retrieved.
* (5) Write these PRDTs to the bottom (offset 0x80) of the Command Table.
* (6) Each AHCI port has up to 32 command slots. Each slot contains a
* header that points to a Command Table buffer. Pick an unused slot
* and update it to point to the Command Table we have built.
* (7) Now: Command #n points to our Command Table, and our Command Table
* contains the FIS (that describes our command) and the PRDTL, which
* describes our buffer.
* (8) We inform the HBA via PxCI (Command Issue) that the command in slot
* #n is ready for processing.
*/
/* Pick the first implemented and running port */
px = ahci_port_select(ahci);
g_test_message("Selected port %u for test", px);
/* Clear out the FIS Receive area and any pending interrupts. */
ahci_port_clear(ahci, px);
/* "Read" 512 bytes using CMD_IDENTIFY into the host buffer. */
ahci_io(ahci, px, CMD_IDENTIFY, &buff, buffsize, 0);
/* Check serial number/version in the buffer */
/* NB: IDENTIFY strings are packed in 16bit little endian chunks.
* Since we copy byte-for-byte in ahci-test, on both LE and BE, we need to
* unchunk this data. By contrast, ide-test copies 2 bytes at a time, and
* as a consequence, only needs to unchunk the data on LE machines. */
string_bswap16(&buff[10], 20);
rc = memcmp(&buff[10], "testdisk ", 20);
g_assert_cmphex(rc, ==, 0);
string_bswap16(&buff[23], 8);
rc = memcmp(&buff[23], "version ", 8);
g_assert_cmphex(rc, ==, 0);
sect_size = le16_to_cpu(*((uint16_t *)(&buff[5])));
g_assert_cmphex(sect_size, ==, AHCI_SECTOR_SIZE);
}
static void ahci_test_io_rw_simple(AHCIQState *ahci, unsigned bufsize,
uint64_t sector, uint8_t read_cmd,
uint8_t write_cmd)
{
uint64_t ptr;
uint8_t port;
unsigned char *tx = g_malloc(bufsize);
unsigned char *rx = g_malloc0(bufsize);
g_assert(ahci != NULL);
/* Pick the first running port and clear it. */
port = ahci_port_select(ahci);
ahci_port_clear(ahci, port);
/*** Create pattern and transfer to guest ***/
/* Data buffer in the guest */
ptr = ahci_alloc(ahci, bufsize);
g_assert(ptr);
/* Write some indicative pattern to our buffer. */
generate_pattern(tx, bufsize, AHCI_SECTOR_SIZE);
qtest_bufwrite(ahci->parent->qts, ptr, tx, bufsize);
/* Write this buffer to disk, then read it back to the DMA buffer. */
ahci_guest_io(ahci, port, write_cmd, ptr, bufsize, sector);
qtest_memset(ahci->parent->qts, ptr, 0x00, bufsize);
ahci_guest_io(ahci, port, read_cmd, ptr, bufsize, sector);
/*** Read back the Data ***/
qtest_bufread(ahci->parent->qts, ptr, rx, bufsize);
g_assert_cmphex(memcmp(tx, rx, bufsize), ==, 0);
ahci_free(ahci, ptr);
g_free(tx);
g_free(rx);
}
static uint8_t ahci_test_nondata(AHCIQState *ahci, uint8_t ide_cmd)
{
uint8_t port;
/* Sanitize */
port = ahci_port_select(ahci);
ahci_port_clear(ahci, port);
ahci_io(ahci, port, ide_cmd, NULL, 0, 0);
return port;
}
static void ahci_test_flush(AHCIQState *ahci)
{
ahci_test_nondata(ahci, CMD_FLUSH_CACHE);
}
static void ahci_test_max(AHCIQState *ahci)
{
RegD2HFIS *d2h = g_malloc0(0x20);
uint64_t nsect;
uint8_t port;
uint8_t cmd;
uint64_t config_sect = mb_to_sectors(test_image_size_mb) - 1;
if (config_sect > 0xFFFFFF) {
cmd = CMD_READ_MAX_EXT;
} else {
cmd = CMD_READ_MAX;
}
port = ahci_test_nondata(ahci, cmd);
qtest_memread(ahci->parent->qts, ahci->port[port].fb + 0x40, d2h, 0x20);
nsect = (uint64_t)d2h->lba_hi[2] << 40 |
(uint64_t)d2h->lba_hi[1] << 32 |
(uint64_t)d2h->lba_hi[0] << 24 |
(uint64_t)d2h->lba_lo[2] << 16 |
(uint64_t)d2h->lba_lo[1] << 8 |
(uint64_t)d2h->lba_lo[0];
g_assert_cmphex(nsect, ==, config_sect);
g_free(d2h);
}
/******************************************************************************/
/* Test Interfaces */
/******************************************************************************/
/**
* Basic sanity test to boot a machine, find an AHCI device, and shutdown.
*/
static void test_sanity(void)
{
AHCIQState *ahci;
ahci = ahci_boot(NULL);
ahci_shutdown(ahci);
}
/**
* Ensure that the PCI configuration space for the AHCI device is in-line with
* the AHCI 1.3 specification for initial values.
*/
static void test_pci_spec(void)
{
AHCIQState *ahci;
ahci = ahci_boot(NULL);
ahci_test_pci_spec(ahci);
ahci_shutdown(ahci);
}
/**
* Engage the PCI AHCI device and sanity check the response.
* Perform additional PCI config space bringup for the HBA.
*/
static void test_pci_enable(void)
{
AHCIQState *ahci;
ahci = ahci_boot(NULL);
ahci_pci_enable(ahci);
ahci_shutdown(ahci);
}
/**
* Investigate the memory mapped regions of the HBA,
* and test them for AHCI specification adherence.
*/
static void test_hba_spec(void)
{
AHCIQState *ahci;
ahci = ahci_boot(NULL);
ahci_pci_enable(ahci);
ahci_test_hba_spec(ahci);
ahci_shutdown(ahci);
}
/**
* Engage the HBA functionality of the AHCI PCI device,
* and bring it into a functional idle state.
*/
static void test_hba_enable(void)
{
AHCIQState *ahci;
ahci = ahci_boot(NULL);
ahci_pci_enable(ahci);
ahci_hba_enable(ahci);
ahci_shutdown(ahci);
}