qgis_algorithm_tests.yaml

# See ../README.md for a description of the file format

tests:

  - name: Centroid # Human readable identifier
    algorithm: native:centroids # Algorithm name
    params: # A list of parameters
      INPUT:
        type: vector    # Param is a vector layer
        name: polys.gml # file name
    results: # A map of results (only one here)
      OUTPUT:
        type: vector   # Expected result is a vector layer
        name: expected/polys_centroid.gml # The relative filepath from the processing testdata directory
        compare:
          geometry:
            precision: 7

  - name: Delete Holes
    algorithm: qgis:deleteholes
    params:
    - name: polys.gml
      type: vector
    results:
      OUTPUT:
        name: expected/polys_deleteholes.gml
        type: vector

  - algorithm: native:clip
    name: Clip lines by polygons
    params:
      INPUT:
        name: custom/lines2.gml
        type: vector
      OVERLAY:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_lines_by_polygon.gml
        type: vector

  - algorithm: native:clip
    name: Clip lines by multipolygon
    params:
      INPUT:
        name: lines.gml
        type: vector
      OVERLAY:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_lines_by_multipolygon.gml
        type: vector

  - algorithm: native:clip
    name: Clip polygons by multipolygons
    params:
      INPUT:
        name: polys.gml
        type: vector
      OVERLAY:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_polys_by_multipolygon.gml
        type: vector

  - algorithm: native:clip
    name: Clip multipolygons by polygons
    params:
      INPUT:
        name: multipolys.gml
        type: vector
      OVERLAY:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_multipolygons_by_polygons.gml
        type: vector

  - algorithm: native:clip
    name: Clip points by polygons
    params:
      INPUT:
        name: points.gml
        type: vector
      OVERLAY:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_points_by_polygons.gml
        type: vector

  - algorithm: native:clip
    name: Clip points by multipolygons
    params:
      INPUT:
        name: points.gml
        type: vector
      OVERLAY:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/clip_points_by_multipolygons.gml
        type: vector

#  # These datasets should produce a geometry collection and not a polygon only
#  # dataset. If the algorithm is fixed, a new test should be introduced to
#  # check this behavior.
#  # This test should stay in place because for shapefiles there should always
#  # be a polygon result created since it does not support geometry collections.
  - algorithm: qgis:intersection
    name: Intersects multipolygons with polygons
    params:
      INPUT:
        name: multipolys.gml
        type: vector
      OVERLAY:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/intersection_collection_fallback.shp
        type: vector

  - name: Densify geometries
    algorithm: qgis:densifygeometries
    params:
      INPUT:
        name: multipolys.gml
        type: vector
      VERTICES: 4
    results:
      OUTPUT:
        name: expected/multipolys_densify.gml
        type: vector

  - name: Polygons to Lines
    algorithm: qgis:polygonstolines
    params:
    - name: multipolys.gml
      type: vector
    results:
      OUTPUT:
        name: expected/polys_to_lines.gml
        type: vector
        compare:
          fields:
            fid: skip

  - algorithm: qgis:basicstatisticsforfields
    name: Basic statistics for numeric fields
    params:
    - name: multipolys.gml
      type: vector
    - 'Bfloatval'
    results:
      OUTPUT_HTML_FILE:
        name: basic_statistics_numeric_float.html
        type: regex
        rules:
          - 'Analyzed field: Bfloatval'
          - 'Count: 3'
          - 'Unique values: 3'
          - 'Minimum value: -0.123'
          - 'Maximum value: 0.123'
          - 'Range: 0.246'
          - 'Sum: 0.0'
          - 'Mean value: 0.0'
          - 'Median value: 0.0'
          - 'Standard deviation: 0.100429079454'
          - 'Coefficient of Variation: 0'
          - 'Minority \(rarest occurring value\): -0.123'
          - 'Majority \(most frequently occurring value\): -0.123'
          - 'First quartile: -0.0615'
          - 'Third quartile: 0.0615'
          - 'NULL \(missing\) values: 1'
          - 'Interquartile Range \(IQR\): 0.123'

  - algorithm: qgis:basicstatisticsforfields
    name: Basic statistics for text fields
    params:
    - name: multipolys.gml
      type: vector
    - 'Bname'
    results:
      OUTPUT_HTML_FILE:
        name: expected/basic_statistics_string.html
        type: regex
        rules:
          - 'Analyzed field: Bname'
          - 'Count: 4'
          - 'Unique values: 2'
          - 'Minimum value: Test'
          - 'Maximum value: Test'
          - 'Minimum length: 0'
          - 'Maximum length: 4'
          - 'Mean length: 3.0'
          - 'NULL \(missing\) values: 1'

#  # Split lines with lines considers two cases
#  # case 1: two different layers
#  - algorithm: qgis:splitlineswithlines
#    name: Split lines with lines
#    params:
#      INPUT_A:
#        name: lines.gml
#        type: vector
#      INPUT_B:
#        name: custom/lines2.gml
#        type: vector
#    results:
#      OUTPUT:
#        name: expected/lines_split_with_lines.gml
#        type: vector
#        compare:
#          geometry:
#            precision: 7
#
#  # case 2 split line layer with iself
#  - algorithm: qgis:splitlineswithlines
#    name: Split lines with same lines
#    params:
#      INPUT_A:
#        name: custom/lines2.gml
#        type: vector
#      INPUT_B:
#        name: custom/lines2.gml
#        type: vector
#    results:
#      OUTPUT:
#        name: expected/lines_split_with_same_lines.gml
#        type: vector
#        compare:
#          geometry:
#            precision: 7
#

  - algorithm: qgis:listuniquevalues
    name: Unique values
    params:
      INPUT:
        name: points.gml
        type: vector
      FIELD_NAME: id2
    results:
      OUTPUT:
        name: expected/unique_values.gml
        type: vector

  - algorithm: qgis:addautoincrementalfield
    name: Add autoincremental field
    params:
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/autoincrement_field.gml
        type: vector

  - algorithm: native:dissolve
    name: Dissolve using field
    params:
      FIELD: name
      INPUT:
        name: dissolve_polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/dissolve_field.gml
        type: vector

  - algorithm: native:dissolve
    name: Dissolve using two fields
    params:
      FIELD: intval;name
      INPUT:
        name: dissolve_polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/dissolve_two_fields.gml
        type: vector

#  - name: Dissolve with geometries reported as valid but as invalid with isGeosValid
#    algorithm: qgis:dissolve
#    params:
#      DISSOLVE_ALL: 'True'
#      FIELD: None
#      INPUT:
#        name: custom/innerRingTouchesOuterRing.gml
#        type: vector
#    results:
#      OUTPUT:
#        type: vector
#        name: expected/innerRingTouchesOuterRing_output.gml
#        compare:
#          geometry:
#            precision: 0
#
#  - name: Dissolve with NULL geometries
#    algorithm: qgis:dissolve
#    params:
#      DISSOLVE_ALL: 'True'
#      FIELD: None
#      INPUT:
#        name: custom/nullGeometryDissolve.gml
#        type: vector
#    results:
#      OUTPUT:
#        type: vector
#        name: expected/nullGeometryDissolve_output.gml
#        compare:
#          geometry:
#            precision: 7
#
#  - name: Dissolve with invalid geometries
#    algorithm: qgis:dissolve
#    params:
#      DISSOLVE_ALL: 'True'
#      FIELD: None
#      INPUT:
#        name: custom/PolygonDissolveTest.gml
#        type: vector
#    results:
#      OUTPUT:
#        type: vector
#        name: expected/PolygonDissolveTest_output.gml
#        compare:
#          geometry:
#            precision: 7

  - algorithm: qgis:fixeddistancebuffer
    name: Basic polygon buffer
    params:
      DISSOLVE: 'False'
      DISTANCE: 0.5
      INPUT:
        name: polys.gml
        type: vector
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_polys.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:fixeddistancebuffer
    name: Polygon buffer with dissolve
    params:
      DISSOLVE: 'True'
      DISTANCE: 0.5
      INPUT:
        name: polys.gml
        type: vector
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_polys_dissolve.gml
        type: vector
        compare:
          geometry:
            precision: 7
          fields:
            fid: skip
            name: skip
            intval: skip
            floatval: skip

#  - algorithm: qgis:rectanglesovalsdiamondsfixed
#    name: Create fixed distance rectange buffers around points
#    params:
#      HEIGHT: 0.25
#      INPUT_LAYER:
#        name: points.gml
#        type: vector
#      ROTATION: 45
#      SEGMENTS: 36
#      SHAPE: 0
#      WIDTH: 0.5
#    results:
#      OUTPUT_LAYER:
#        name: expected/rectanglesovalsdiamondsfixed.gml
#        type: vector
#        compare:
#          geometry:
#            precision: 7

  - algorithm: qgis:mergelines
    name: Merge lines algorithm
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/merge_lines.gml
        type: vector

  - algorithm: native:multiparttosingleparts
    name: Multiparts to singleparts
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multi_to_single.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for lines
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/lines_bounds.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for multilines
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multiline_bounds.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for multipolygons
    params:
      INPUT:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multipoly_bounds.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for points
    params:
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/point_bounds.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for polygons
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/poly_bounds.gml
        type: vector

  - algorithm: qgis:boundingboxes
    name: Bounding boxes for multipoints
    params:
      INPUT:
        name: multipoints.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multipoint_bounds.gml
        type: vector

  - algorithm: qgis:boundary
    name: Polygon boundary
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/poly_boundary.gml
        type: vector

  - algorithm: qgis:boundary
    name: Multipoly boundary
    params:
      INPUT:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multipoly_boundary.gml
        type: vector

  - algorithm: qgis:boundary
    name: Line boundary
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/lines_boundary.gml
        type: vector

  - algorithm: qgis:boundary
    name: Multiline boundary
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multiline_boundary.gml
        type: vector

  - algorithm: qgis:setmvalue
    name: Set M Value
    params:
      INPUT:
        name: points.gml
        type: vector
      M_VALUE: 7
    results:
      OUTPUT:
        name: expected/set_m_value.shp
        type: vector

  - algorithm: qgis:setzvalue
    name: Set Z Value
    params:
      INPUT:
        name: points.gml
        type: vector
      Z_VALUE: 6
    results:
      OUTPUT:
        name: expected/set_z_value.shp
        type: vector

  - algorithm: qgis:dropmzvalues
    name: Drop M Value
    params:
      INPUT:
        name: custom/pointszm.shp
        type: vector
      DROP_Z_VALUES: False
      DROP_M_VALUES: True
    results:
      OUTPUT:
        name: expected/m_dropped.shp
        type: vector

  - algorithm: qgis:dropmzvalues
    name: Drop Z Value
    params:
      INPUT:
        name: custom/pointszm.shp
        type: vector
      DROP_Z_VALUES: True
      DROP_M_VALUES: False
    results:
      OUTPUT:
        name: expected/z_dropped.shp
        type: vector

  - algorithm: qgis:dropmzvalues
    name: Drop ZM Value
    params:
      INPUT:
        name: custom/pointszm.shp
        type: vector
      DROP_Z_VALUES: True
      DROP_M_VALUES: True
    results:
      OUTPUT:
        name: expected/zm_dropped.shp
        type: vector

  - algorithm: qgis:pointonsurface
    name: Point on polygon surface
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/point_on_poly.gml
        type: vector

  - algorithm: qgis:pointonsurface
    name: Point on multipoint surface
    params:
      INPUT:
        name: multipoints.gml
        type: vector
    results:
      OUTPUT:
        name: expected/point_on_multipoint.gml
        type: vector

  - algorithm: qgis:pointonsurface
    name: Point on line surface
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/point_on_line.gml
        type: vector

  - algorithm: qgis:reverselinedirection
    name: Reverse line direction
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/lines_reversed.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:offsetline
    name: Offset line positive
    params:
      DISTANCE: 1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 8
    results:
      OUTPUT:
        name: expected/line_offset_round_positive.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:offsetline
    name: Offset line negative
    params:
      DISTANCE: -1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 8
    results:
      OUTPUT:
        name: expected/line_offset_round_negative.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:offsetline
    name: Offset line mitre
    params:
      DISTANCE: 1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '1'
      MITRE_LIMIT: 2
      SEGMENTS: 4
    results:
      OUTPUT:
        name: expected/line_offset_mitre.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:offsetline
    name: Offset line bevel
    params:
      DISTANCE: 1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '2'
      MITRE_LIMIT: 2
      SEGMENTS: 8
    results:
      OUTPUT:
        name: expected/line_offset_bevel.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:offsetline
    name: Offset multilines
    params:
      DISTANCE: 1.0
      INPUT:
        name: multilines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 8
    results:
      OUTPUT:
        name: expected/multiline_offset.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:fixeddistancebuffer
    name: Buffer polygons using bevel
    params:
      DISSOLVE: false
      DISTANCE: 1.0
      END_CAP_STYLE: '0'
      INPUT:
        name: polys.gml
        type: vector
      JOIN_STYLE: '2'
      MITRE_LIMIT: 2
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_polys_bevel.gml
        type: vector

  - algorithm: qgis:fixeddistancebuffer
    name: Buffer polygons using mitre
    params:
      DISSOLVE: false
      DISTANCE: 1.0
      END_CAP_STYLE: '0'
      INPUT:
        name: polys.gml
        type: vector
      JOIN_STYLE: '1'
      MITRE_LIMIT: 2
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_polys_mitre.gml
        type: vector

  - algorithm: qgis:fixeddistancebuffer
    name: Buffer lines
    params:
      DISSOLVE: false
      DISTANCE: 1.0
      END_CAP_STYLE: '0'
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:fixeddistancebuffer
    name: Buffer lines (flat)
    params:
      DISSOLVE: false
      DISTANCE: 1.0
      END_CAP_STYLE: '1'
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_lines_flat.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:fixeddistancebuffer
    name: Buffer lines (square)
    params:
      DISSOLVE: false
      DISTANCE: 1.0
      END_CAP_STYLE: '2'
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/buffer_lines_square.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (lines)
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (multilines)
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_multilines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (multipoints)
    params:
      INPUT:
        name: multipoints.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_multipoint.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (multipolygons)
    params:
      INPUT:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_multipolys.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (points)
    params:
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_points.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:centroids
    name: Centroid (polygons)
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/centroid_polys.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:translategeometry
    name: Lines translated
    params:
      DELTA_X: 0.1
      DELTA_Y: -0.2
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/lines_translated.gml
        type: vector

  - algorithm: qgis:singlesidedbuffer
    name: Single sided buffer lines (left, round)
    params:
      DISTANCE: 1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '0'
      MITRE_LIMIT: 2
      SEGMENTS: 8
      SIDE: '0'
    results:
      OUTPUT:
        name: expected/single_sided_buffer_line.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:singlesidedbuffer
    name: Single sided buffer lines (Right, mitre)
    params:
      DISTANCE: 1.0
      INPUT:
        name: lines.gml
        type: vector
      JOIN_STYLE: '1'
      MITRE_LIMIT: 2
      SEGMENTS: 8
      SIDE: '1'
    results:
      OUTPUT:
        name: expected/single_sided_buffer_line_mitre.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:singlesidedbuffer
    name: Single sided buffer multiline (bevel)
    params:
      DISTANCE: 1.0
      INPUT:
        name: multilines.gml
        type: vector
      JOIN_STYLE: '2'
      MITRE_LIMIT: 2
      SEGMENTS: 8
      SIDE: '0'
    results:
      OUTPUT:
        name: expected/single_sided_buffer_multiline_bevel.gml
        type: vector

  - algorithm: qgis:extractnodes
    name: Test (qgis:extractnodes)
    params:
      INPUT:
        name: multipolys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/extract_nodes_multipolys.gml
        type: vector

  - algorithm: qgis:extractnodes
    name: Extract nodes from polygons
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/extract_nodes_polys.gml
        type: vector

  - algorithm: qgis:extractnodes
    name: Extract nodes from multilines
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/extract_nodes_multilines.gml
        type: vector

  - algorithm: qgis:extractnodes
    name: Extract nodes from lines
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/extract_nodes_lines.gml
        type: vector

  - algorithm: qgis:simplifygeometries
    name: Simplify (lines)
    params:
      INPUT:
        name: lines.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/simplify_lines.gml
        type: vector

  - algorithm: qgis:simplifygeometries
    name: Simplify (multilines)
    params:
      INPUT:
        name: multilines.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/simplify_multilines.gml
        type: vector

  - algorithm: qgis:simplifygeometries
    name: Simplify (visval)
    params:
      INPUT:
        name: simplify_lines.gml
        type: vector
      METHOD: '2'
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/simplify_vis_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:simplifygeometries
    name: Simplify (grid)
    params:
      INPUT:
        name: simplify_lines.gml
        type: vector
      METHOD: '1'
      TOLERANCE: 5.0
    results:
      OUTPUT:
        name: expected/simplify_grid_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:smoothgeometry
    name: Smooth (lines)
    params:
      INPUT:
        name: lines.gml
        type: vector
      ITERATIONS: 1
      MAX_ANGLE: 180.0
      OFFSET: 0.25
    results:
      OUTPUT:
        name: expected/smoothed_lines.gml
        type: vector

  - algorithm: qgis:smoothgeometry
    name: Smooth (lines, with max angle)
    params:
      INPUT:
        name: lines.gml
        type: vector
      ITERATIONS: 1
      MAX_ANGLE: 60.0
      OFFSET: 0.25
    results:
      OUTPUT:
        name: expected/smoothed_lines_max_angle.gml
        type: vector

  - algorithm: qgis:exportaddgeometrycolumns
    name: Add Geometry PointZ
    params:
      CALC_METHOD: '0'
      INPUT:
        name: pointsz.gml
        type: vector
    results:
      OUTPUT:
        name: expected/add_geometry_pointz.gml
        type: vector

  - algorithm: qgis:texttofloat
    name: Text to float
    params:
      FIELD: 'text_float'
      INPUT:
        name: custom/text_to_float.gml
        type: vector
    results:
      OUTPUT:
        name: expected/text_to_float.gml
        type: vector

  - algorithm: qgis:countpointsinpolygon
    name: Count points in polygon
    params:
      FIELD: NUMPOINTS
      POINTS:
        name: points_in_polys.gml
        type: vector
      POLYGONS:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/points_in_polys.gml
        type: vector

  - algorithm: qgis:aspect
    name: Aspect from QGIS analysis library
    params:
      INPUT:
        name: dem.tif
        type: raster
      Z_FACTOR: 1.0
    results:
      OUTPUT:
        hash: 762865ee485a6736d188402aa10e6fd38a812a9e45a7dd2d4885a63a
        type: rasterhash

  - algorithm: qgis:slope
    name: Slope from QGIS analysis library
    params:
      INPUT:
        name: dem.tif
        type: raster
      Z_FACTOR: 1.0
    results:
      OUTPUT:
        hash: 151ea76a21b286c16567eb6b4b692925a84145b65561a0017effb1a1
        type: rasterhash

  - algorithm: qgis:ruggednessindex
    name: Ruggedness index from QGIS analysis library
    params:
      INPUT:
        name: dem.tif
        type: raster
      Z_FACTOR: 1.0
    results:
      OUTPUT:
        hash: ff630246e8dc19c7217d81261c6b64f965c17fa04d3e41d7979c1f1e
        type: rasterhash

  - algorithm: qgis:hillshade
    name: Hillshade from QGIS analysis library
    params:
      AZIMUTH: 300.0
      INPUT:
        name: dem.tif
        type: raster
      V_ANGLE: 40.0
      Z_FACTOR: 1.0
    results:
      OUTPUT:
        hash: 58365b3715b925d6286e7f082ebd9c2a20f09fa1c922176d3f238002
        type: rasterhash

#  - algorithm: qgis:relief
#    name: Relief (automatic colors generation)
#    params:
#      AUTO_COLORS: true
#      INPUT_LAYER:
#        name: dem.tif
#        type: raster
#      Z_FACTOR: 1.0
#    results:
#      OUTPUT_LAYER:
#        hash: 7fe0e0174185fd743e23760f33615adf10f771b4275f320db6f7f4f8
#        type: rasterhash
#
#  - algorithm: qgis:relief
#    name: Relief (custom colors)
#    params:
#      AUTO_COLORS: false
#      COLORS: 85.000000, 104.436508, 7, 165, 144;104.436508, 104.436508, 12, 221, 162;104.436508,
#        104.436508, 33, 252, 183;104.436508, 104.436508, 247, 252, 152;104.436508, 104.436508,
#        252, 196, 8;104.436508, 190.333333, 252, 166, 15;190.333333, 226.698413, 175,
#        101, 15;226.698413, 226.698413, 255, 133, 92;226.698413, 243.000000, 204, 204,
#        204
#      INPUT_LAYER:
#        name: dem.tif
#        type: raster
#      Z_FACTOR: 1.0
#    results:
#      OUTPUT_LAYER:
#        hash: 7fe0e0174185fd743e23760f33615adf10f771b4275f320db6f7f4f8
#        type: rasterhash

  - algorithm: qgis:createconstantrasterlayer
    name: Create constant raster
    params:
      EXTENT: 270736.0673250682,270899.8544675339,4458899.000550019,4459029.574521748
      TARGET_CRS: EPSG:23030
      PIXEL_SIZE: 10.0
      NUMBER: 3.0
    results:
      OUTPUT:
        hash: e453e9e36ce314d5197963ac27872a0cc3dfe43764ed586a334c66f0
        type: rasterhash

  # Case 1: Keep all fields
  - algorithm: qgis:lineintersections
    name: Line Intersection Keep All Fields from Both
    params:
      INPUT:
        name: lines.gml
        type: vector
      INTERSECT:
        name: simplify_lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/line_intersection.gml
        type: vector

  # Case 2: Keep fid field from both layers
  - algorithm: qgis:lineintersections
    name: Line Intersection Keep fid from Both
    params:
      INPUT_FIELDS: fid
      INTERSECT_FIELDS: fid
      INPUT:
        name: lines.gml
        type: vector
      INTERSECT:
        name: simplify_lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/line_intersection.gml
        type: vector

  - algorithm: qgis:sumlinelengths
    name: Sum line lengths
    params:
      COUNT_FIELD: line_count
      LEN_FIELD: line_len
      LINES:
        name: lines.gml
        type: vector
      POLYGONS:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/sum_line_length.gml
        type: vector

  - algorithm: qgis:delaunaytriangulation
    name: Delaunay triangulation (multipoint data)
    params:
      INPUT:
        name: multipoints.gml
        type: vector
    results:
      OUTPUT:
        name: expected/multipoint_delaunay.gml
        type: vector

#  - algorithm: qgis:idwinterpolation
#    name: IDW interpolation using attribute
#    params:
#      CELLSIZE_X: 0.02667
#      CELLSIZE_Y: 0.02667
#      COLUMNS: 300
#      DISTANCE_COEFFICIENT: 2.0
#      EXTENT: 0, 8, -5, 3
#      INTERPOLATION_DATA:
#        name: pointsz.gml,False,1,0
#        type: interpolation
#      ROWS: 300
#    results:
#      OUTPUT_LAYER:
#        hash: 56d2671d50444f8571affba3f9e585830b82af5e380394178f521065
#        type: rasterhash
#
#  - algorithm: qgis:idwinterpolation
#    name: IDW interpolation using Z value
#    params:
#      CELLSIZE_X: 0.02667
#      CELLSIZE_Y: 0.02667
#      COLUMNS: 300
#      DISTANCE_COEFFICIENT: 2.0
#      EXTENT: 0, 8, -5, 3
#      INTERPOLATION_DATA:
#        name: pointsz.gml,True,-1,0
#        type: interpolation
#      ROWS: 300
#    results:
#      OUTPUT_LAYER:
#        hash: 56d2671d50444f8571affba3f9e585830b82af5e380394178f521065
#        type: rasterhash
#
#  - algorithm: qgis:tininterpolation
#    name: TIN interpolation using attribute
#    params:
#      CELLSIZE_X: 0.02667
#      CELLSIZE_Y: 0.02667
#      COLUMNS: 300
#      EXTENT: 0, 8, -5, 3
#      INTERPOLATION_DATA:
#        name: pointsz.gml,False,1,0
#        type: interpolation
#      METHOD: '0'
#      ROWS: 300
#    results:
#      OUTPUT_LAYER:
#        hash: 87f40be6ec08f3fcbb5707762de71f6be35bb265c61f594335562a26
#        type: rasterhash
#      #TRIANULATION_FILE:
#      #  name: expected/triangulation.gml
#      #  type: vector
#
#  - algorithm: qgis:tininterpolation
#    name: TIN interpolation using Z value
#    params:
#      CELLSIZE_X: 0.02667
#      CELLSIZE_Y: 0.02667
#      COLUMNS: 300
#      EXTENT: 0, 8, -5, 3
#      INTERPOLATION_DATA:
#        name: pointsz.gml,True,-1,0
#        type: interpolation
#      METHOD: '1'
#      ROWS: 300
#    results:
#      OUTPUT_LAYER:
#        hash: 5e14dd0b879884b8b8da56c082947dad681feb4e9f1137f5cda126f8
#        type: rasterhash
#      #TRIANULATION_FILE:
#      #  name: expected/triangulation.gml
#      #  type: vector

  - algorithm: native:removenullgeometries
    name: Remove null geometries
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/remove_null_polys.gml
        type: vector

  - algorithm: native:extractbyexpression
    name: Extract by Expression
    params:
      EXPRESSION: left( "Name",1)='A'
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/extract_expression.gml
        type: vector

  - algorithm: qgis:extendlines
    name: Extend lines
    params:
      END_DISTANCE: 0.2
      INPUT:
        name: lines.gml
        type: vector
      START_DISTANCE: 0.1
    results:
      OUTPUT:
        name: expected/extend_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7
  - algorithm: qgis:extendlines
    name: Extend multilines
    params:
      END_DISTANCE: 0.4
      INPUT:
        name: multilines.gml
        type: vector
      START_DISTANCE: 0.2
    results:
      OUTPUT:
        name: expected/extend_multilines.gml
        type: vector

  - algorithm: qgis:extractspecificnodes
    name: Extract specific nodes lines
    params:
      INPUT:
        name: lines.gml
        type: vector
      NODES: 0,-1,2,-2
    results:
      OUTPUT:
        name: expected/extract_specific_nodes_lines.gml
        type: vector
        compare:
          fields:
            fid: skip

  - algorithm: qgis:extractspecificnodes
    name: Extract specific nodes polygons
    params:
      INPUT:
        name: polys.gml
        type: vector
      NODES: 0,-1,5,-5
    results:
      OUTPUT:
        name: expected/extract_specific_nodes_polys.gml
        type: vector
        compare:
          fields:
            fid: skip

  - algorithm: qgis:geometrybyexpression
    name: Geometry by expression (point)
    params:
      EXPRESSION: 'translate( $geometry,1,1)'
      INPUT:
        name: points.gml
        type: vector
      OUTPUT_GEOMETRY: '0'
      WITH_M: false
      WITH_Z: false
    results:
      OUTPUT:
        name: expected/geometry_by_expression_point.gml
        type: vector

  - algorithm: qgis:geometrybyexpression
    name: Geometry by expression (polygon)
    params:
      EXPRESSION: ' translate( centroid($geometry),1,1)'
      INPUT:
        name: polys.gml
        type: vector
      OUTPUT_GEOMETRY: '2'
      WITH_M: false
      WITH_Z: false
    results:
      OUTPUT:
        name: expected/geometry_by_expression_poly.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:geometrybyexpression
    name: Geometry by expression (line)
    params:
      EXPRESSION: ' translate( $geometry,1,1)'
      INPUT:
        name: lines.gml
        type: vector
      OUTPUT_GEOMETRY: '1'
      WITH_M: false
      WITH_Z: false
    results:
      OUTPUT:
        name: expected/geometry_by_expression_line.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap lines to lines
    params:
      INPUT:
        name: snap_lines.gml
        type: vector
      REFERENCE_LAYER:
        name: lines.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_lines_to_lines.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap polygons to polygons
    params:
      INPUT:
        name: snap_polys.gml
        type: vector
      REFERENCE_LAYER:
        name: polys.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_polys_to_polys.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap points to points
    params:
      INPUT:
        name: snap_points.gml
        type: vector
      REFERENCE_LAYER:
        name: points.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_points_to_points.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap points to lines (prefer nodes)
    params:
      BEHAVIOR: '0'
      INPUT:
        name: snap_points.gml
        type: vector
      REFERENCE_LAYER:
        name: lines.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_point_to_lines_prefer_nodes.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap points to lines (prefer closest)
    params:
      BEHAVIOR: '1'
      INPUT:
        name: snap_points.gml
        type: vector
      REFERENCE_LAYER:
        name: lines.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_point_to_lines_prefer_closest.gml
        type: vector

  - algorithm: qgis:snapgeometries
    name: Snap internal
    params:
      BEHAVIOR: '0'
      INPUT:
        name: custom/snap_internal.gml
        type: vector
      REFERENCE_LAYER:
        name: custom/snap_internal.gml
        type: vector
      TOLERANCE: 1.0
    results:
      OUTPUT:
        name: expected/snap_internal.gml
        type: vector

  - algorithm: qgis:poleofinaccessibility
    name: Pole of inaccessibility (polygons)
    params:
      INPUT:
        name: polys.gml
        type: vector
      TOLERANCE: 1.0e-05
    results:
      OUTPUT:
        name: expected/pole_inaccessibility_polys.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: native:extractbyattribute
    name: Extract by attribute (is null)
    params:
      FIELD: intval
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '8'
    results:
      OUTPUT:
        name: expected/extract_by_attribute_null.gml
        type: vector

  - algorithm: native:extractbyattribute
    name: Extract by attribute (is not null)
    params:
      FIELD: intval
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '9'
    results:
      OUTPUT:
        name: expected/extract_by_attribute_not_null.gml
        type: vector

  - algorithm: native:extractbyattribute
    name: Extract by attribute (starts with)
    params:
      FIELD: name
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '6'
      VALUE: A
    results:
      OUTPUT:
        name: expected/extract_by_attribute_startswith.gml
        type: vector

  - algorithm: native:extractbyattribute
    name: Extract by attribute (contains)
    params:
      FIELD: name
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '7'
      VALUE: aaa
    results:
      OUTPUT:
        name: expected/extract_by_attribute_contains.gml
        type: vector

  - algorithm: native:extractbyattribute
    name: Extract by attribute (does not contain)
    params:
      FIELD: name
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '10'
      VALUE: a
    results:
      OUTPUT:
        name: expected/extract_by_attribute_does_not_contain.gml
        type: vector

  - algorithm: native:extractbyattribute
    name: Extract by attribute (greater)
    params:
      FIELD: floatval
      INPUT:
        name: polys.gml
        type: vector
      OPERATOR: '2'
      VALUE: '1'
    results:
      OUTPUT:
        name: expected/extract_by_attribute_greater.gml
        type: vector

  - algorithm: qgis:createattributeindex
    name: Create Attribute Index (only tests for python errors, does not check result)
    params:
      FIELD: fid
      INPUT:
        name: lines.gml
        type: vector
    results: {}

  - algorithm: qgis:deletecolumn
    name: Delete columns (multiple)
    params:
      COLUMN: floatval;name
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/delete_columns.gml
        type: vector

  - algorithm: qgis:deletecolumn
    name: Delete columns (single)
    params:
      COLUMN: intval
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/delete_column.gml
        type: vector

  - algorithm: qgis:createpointslayerfromtable
    name: Create points from table
    params:
      INPUT:
        name: create_points.gml
        type: table
      MFIELD: mcoord
      TARGET_CRS: EPSG:4326
      XFIELD: xcoord
      YFIELD: ycoord
      ZFIELD: zcoord
    results:
      OUTPUT:
        name: expected/create_points.gml
        type: vector

  - algorithm: qgis:splitwithlines
    name: Split lines with lines (new alg)
    params:
      INPUT:
        name: lines.gml
        type: vector
      LINES:
        name: custom/lines2.gml
        type: vector
    results:
      OUTPUT:
        name: expected/split_lines_with_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:splitwithlines
    name: Split poly with lines
    params:
      INPUT:
        name: polys.gml
        type: vector
      LINES:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/split_polys_with_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:splitwithlines
    name: Split lines with same lines
    params:
      INPUT:
        name: lines.gml
        type: vector
      LINES:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/split_lines_with_lines_same.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:dropgeometries
    name: Drop geometries
    params:
      INPUT:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/dropped_geometry.csv
        type: vector

  - algorithm: qgis:creategridlines
    name: Create grid (lines)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HSPACING: 5.0
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridpolygon
    name: Create grid (rectangles)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HSPACING: 5.0
      TYPE: '0'
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_rectangles.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridpolygon
    name: Create grid (diamond)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HSPACING: 5.0
      TYPE: '1'
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_diamond.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridpolygon
    name: Create grid (hexagon)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HSPACING: 5.0
      TYPE: '2'
      VSPACING: 5.0
    results:
      OUTPUT:
        name: expected/grid_hexagon.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridlines
    name: Create grid (lines with overlay)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HOVERLAY: 2.0
      HSPACING: 5.0
      VOVERLAY: 1.0
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_lines_overlay.gml
        type: vector

  - algorithm: qgis:creategridpolygon
    name: Create grid (rectangle with overlay)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HOVERLAY: 2.0
      HSPACING: 5.0
      TYPE: '0'
      VOVERLAY: 1.0
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_rectangle_overlay.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridpolygon
    name: Create grid (diamond with overlay)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HOVERLAY: 2.0
      HSPACING: 5.0
      TYPE: '1'
      VOVERLAY: 1.0
      VSPACING: 3.0
    results:
      OUTPUT:
        name: expected/grid_diamond_overlay.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:creategridpolygon
    name: Create grid (hexagon with overlay)
    params:
      CRS: EPSG:4326
      EXTENT: -1,11.2,-4,6.5
      HOVERLAY: 2.0
      HSPACING: 5.0
      TYPE: '2'
      VOVERLAY: 1.0
      VSPACING: 5.0
    results:
      OUTPUT:
        name: expected/grid_hexagon_overlay.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:deleteholes
    name: Delete holes (no min)
    params:
      INPUT:
        name: custom/remove_holes.gml
        type: vector
      MIN_AREA: 0.0
    results:
      OUTPUT:
        name: expected/removed_holes.gml
        type: vector

  - algorithm: qgis:deleteholes
    name: Delete holes (with min)
    params:
      INPUT:
        name: custom/remove_holes.gml
        type: vector
      MIN_AREA: 5.0
    results:
      OUTPUT:
        name: expected/removed_holes_min_area.gml
        type: vector

  - algorithm: qgis:basicstatisticsforfields
    name: Basic stats datetime
    params:
      FIELD_NAME: date_time
      INPUT_LAYER:
        name: custom/datetimes.tab
        type: table
    results:
      OUTPUT_HTML_FILE:
        name: expected/basic_statistics_datetime.html
        type: regex
        rules:
          - 'Analyzed field: date_time'
          - 'Count: 4'
          - 'Unique values: 3'
          - 'Minimum value: 2014-11-30T14:30:02'
          - 'Maximum value: 2016-11-30T14:29:22'
          - 'NULL \(missing\) values: 1'

  - algorithm: qgis:basicstatisticsforfields
    name: Basic stats date
    params:
      FIELD_NAME: date
      INPUT_LAYER:
        name: custom/datetimes.tab
        type: table
    results:
      OUTPUT_HTML_FILE:
        name: expected/basic_statistics_date.html
        type: regex
        rules:
          - 'Analyzed field: date'
          - 'Count: 4'
          - 'Unique values: 3'
          - 'Minimum value: 2014-11-30T00:00:00'
          - 'Maximum value: 2016-11-30T00:00:00'
          - 'NULL \(missing\) values: 1'

  - algorithm: qgis:basicstatisticsforfields
    name: Basic stats time
    params:
      FIELD_NAME: time
      INPUT_LAYER:
        name: custom/datetimes.tab
        type: table
    results:
      OUTPUT_HTML_FILE:
        name: expected/basic_statistics_time.html
        type: regex
        rules:
          - 'Analyzed field: time'
          - 'Count: 4'
          - 'Unique values: 3'
          - 'Minimum value: 03:29:40'
          - 'Maximum value: 15:29:22'
          - 'NULL \(missing\) values: 1'

#  - algorithm: qgis:rastercalculator
#    name: Raster Calculator with cellsize
#    params:
#      LAYERS:
#        params:
#          - name: dem.tif
#            type: raster
#        type: multi
#      CELLSIZE: 0.001
#      EXPRESSION: dem@1
#    results:
#      OUTPUT:
#        hash: ef97a22ee16e0e28bbdc0341449777b1527e37febc3c4339b2c057c9
#        type: rasterhash
#
#  - algorithm: qgis:rastercalculator
#    name: Raster Calculator
#    params:
#      LAYERS:
#        params:
#          - name: dem.tif
#            type: raster
#        type: multi
#      CELLSIZE: 0.0
#      EXPRESSION: dem@1 * 2
#    results:
#      OUTPUT:
#        hash: fe6e018be13c5a3c17f3f4d0f0dc7686c628cb440b74c4642aa0c939
#        type: rasterhash
#
#  - algorithm: qgis:orientedminimumboundingbox
#    name: Oriented minimum bounding box polys
#    params:
#      BY_FEATURE: true
#      INPUT_LAYER:
#        name: custom/oriented_bbox.gml
#        type: vector
#    results:
#      OUTPUT:
#        name: expected/oriented_bounds.gml
#        type: vector
#        compare:
#          geometry:
#            precision: 7

  - algorithm: qgis:orthogonalize
    name: Orthogonalize polys
    params:
      INPUT:
        name: custom/polys_to_orth.gml
        type: vector
    results:
      OUTPUT:
        name: expected/orthagonal_polys.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:orthogonalize
    name: Orthogonalize lines
    params:
      INPUT:
        name: custom/lines_to_orth.gml
        type: vector
    results:
      OUTPUT:
        name: expected/orthagonal_lines.gml
        type: vector
        compare:
          geometry:
            precision: 7


  - algorithm: native:reprojectlayer
    name: reproject vector layer
    params:
      INPUT:
        name: points.gml
        type: vector
      TARGET_CRS: EPSG:3857
    results:
      OUTPUT:
        name: expected/reprojected.gml
        type: vector
        compare:
          geometry:
            precision: 7

  - algorithm: qgis:variabledistancebuffer
    name: variable buffer on points
    params:
      DISSOLVE: false
      FIELD: buffer
      INPUT:
        name: custom/variable_buffer.gml
        type: vector
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/variable_buffer_points.gml
        type: vector
        compare:
          geometry:
            precision: 5

  - algorithm: qgis:variabledistancebuffer
    name: variable buffer on points with dissolve option
    params:
      DISSOLVE: true
      FIELD: buffer
      INPUT:
        name: custom/variable_buffer.gml
        type: vector
      SEGMENTS: 5
    results:
      OUTPUT:
        name: expected/variable_buffer_points_dissolved.gml
        type: vector
        compare:
          geometry:
            precision: 5
          fields:
            id: skip
            id2: skip
            fid: skip


  - algorithm: qgis:adduniquevalueindexfield
    name: add unique field based on another field
    params:
      FIELD: id2
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/add_unique_field.gml
        type: vector

  - algorithm: qgis:linestopolygons
    name: convert lines to polygon
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/lines_to_polygon.gml
        type: vector

#  - algorithm: qgis:joinattributestable
#    name: join the attribute table by common field
#    params:
#      INPUT_LAYER:
#        name: points.gml
#        type: vector
#      INPUT_LAYER_2:
#        name: table.dbf
#        type: table
#      TABLE_FIELD: id
#      TABLE_FIELD_2: ID
#    results:
#      OUTPUT_LAYER:
#        name: expected/join_attribute_table.gml
#        type: vector

  - algorithm: qgis:convexhull
    name: Simple convex hull
    params:
      INPUT:
        name: custom/points_hull.gml
        type: vector
    results:
      OUTPUT:
        name: expected/convex_hull.gml
        type: vector

  - algorithm: qgis:convexhull
    name: Convex hull based on field attribute
    params:
      FIELD: hull
      INPUT:
        name: custom/points_hull.gml
        type: vector
    results:
      OUTPUT:
        name: expected/convex_hull_fields.gml
        type: vector

#  # These tests dissabled because algs require access to iface which
#  # is not available in the test suite.
#  #- algorithm: qgis:shortestpathpointtopoint
#  #  name: Shortest path (point to point, shortest route)
#  #  params:
#  #    DEFAULT_DIRECTION: '2'
#  #    DEFAULT_SPEED: 5.0
#  #    END_POINT: 1003534.816864,6222363.591221
#  #    INPUT_VECTOR:
#  #      name: roads.gml
#  #      type: vector
#  #    START_POINT: 1000943.661493,6220332.253368
#  #    STRATEGY: '0'
#  #    TOLERANCE: 0.0
#  #  results:
#  #    OUTPUT_LAYER:
#  #      name: expected/shortest.gml
#  #      type: vector
#  #
#  #- algorithm: qgis:shortestpathpointtopoint
#  #  name: Shortest path (point to point, fastest route)
#  #  params:
#  #    DEFAULT_DIRECTION: '2'
#  #    DEFAULT_SPEED: 60.0
#  #    END_POINT: 1003534.816864,6222363.591221
#  #    INPUT_VECTOR:
#  #      name: roads.gml
#  #      type: vector
#  #    SPEED_FIELD: SPEED
#  #    START_POINT: 1000943.661493,6220332.253368
#  #    STRATEGY: '1'
#  #    TOLERANCE: 0.0
#  #  results:
#  #    OUTPUT_LAYER:
#  #      name: expected/fastest.gml
#  #      type: vector
#  #
#  #- algorithm: qgis:serviceareafrompoint
#  #  name: Service area (from point, shortest)
#  #  params:
#  #    DEFAULT_DIRECTION: '2'
#  #    DEFAULT_SPEED: 5.0
#  #    INPUT_VECTOR:
#  #      name: roads.gml
#  #      type: vector
#  #    START_POINT: 1002660.341692,6222015.780774
#  #    STRATEGY: '0'
#  #    TOLERANCE: 0.0
#  #    TRAVEL_COST: 700.0
#  #  results:
#  #    OUTPUT_POINTS:
#  #      name: expected/servicearea_nodes.gml
#  #      type: vector
#  #    OUTPUT_POLYGON:
#  #      name: expected/servicearea_bounds.gml
#  #      type: vector
#
  - algorithm: qgis:createattributeindex
    name: Create attribute index
    params:
      FIELD: id
      INPUT:
        name: custom/points.shp
        type: vector
        in_place: true
    results:
      INPUT:
        name: expected/create_attr_index_points.shp
        type: vector
        in_place_result: true

  - algorithm: qgis:createspatialindex
    name: Create spatial index
    params:
      INPUT:
        name: custom/points.shp
        type: vector
        in_place: true
    results:
      INPUT:
        name: expected/create_attr_index_points.shp
        type: vector
        in_place_result: true

  - algorithm: qgis:truncatetable
    name: Truncate table
    params:
      INPUT:
        name: custom/points.shp
        type: vector
        in_place: true
    results:
      INPUT:
        name: expected/truncated.shp
        type: vector
        in_place_result: true

  - algorithm: qgis:distancematrix
    name: Distance matrix (only tests for run, does not check result as rows are in random order)
    params:
      INPUT_FIELD: fid
      INPUT:
        name: points.gml
        type: vector
      MATRIX_TYPE: '0'
      NEAREST_POINTS: 0
      TARGET_FIELD: fid
      TARGET:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/count_unique_points.gml
        type: vector
        compare: false

  - algorithm: qgis:countpointsinpolygon
    name: standard count unique points in polygon
    params:
      CLASSFIELD: id2
      FIELD: NUMPOINTS
      POINTS:
        name: points.gml
        type: vector
      POLYGONS:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/count_unique_points.gml
        type: vector

  - algorithm: qgis:countpointsinpolygon
    name: standard count points in polygon weighted
    params:
      FIELD: NUMPOINTS
      POINTS:
        name: custom/points_weighted.gml
        type: vector
      POLYGONS:
        name: polys.gml
        type: vector
      WEIGHT: id
    results:
      OUTPUT:
        name: expected/count_points_weighted.gml
        type: vector

  - algorithm: qgis:pointsalonglines
    name: standard points alog lines
    params:
      DISTANCE: 1.0
      END_OFFSET: 0.0
      INPUT:
        name: lines.gml
        type: vector
      START_OFFSET: 0.0
    results:
      OUTPUT:
        name: expected/points_alog_lines.gml
        type: vector

  - algorithm: qgis:meancoordinates
    name: standard mean coordinates
    params:
      INPUT:
        name: custom/points.shp
        type: vector
    results:
      OUTPUT:
        name: expected/mean_coordinates.gml
        type: vector

  - algorithm: qgis:singlepartstomultipart
    name: single part to multipart
    params:
      FIELD: id
      INPUT:
        name: custom/single_part_poly.gml
        type: vector
    results:
      OUTPUT:
        name: expected/single_to_multi.gml
        type: vector

#  - algorithm: qgis:zonalstatistics
#    name: simple zonal statistics
#    params:
#      COLUMN_PREFIX: _
#      GLOBAL_EXTENT: false
#      INPUT_RASTER:
#        name: dem.tif
#        type: raster
#      INPUT_VECTOR:
#        name: custom/polygon_mask.gml
#        type: vector
#      RASTER_BAND: 1
#    results:
#      OUTPUT_LAYER:
#        name: expected/zonal_statistics.gml
#        type: vector

  - algorithm: qgis:fixgeometries
    name: Fix geometries
    params:
      INPUT:
        name: invalidgeometries.gml
        type: vector
    results:
      OUTPUT:
        name: expected/valid.gml
        type: vector

  - algorithm: qgis:polygonize
    name: Polygonize
    params:
      KEEP_FIELDS: false
      INPUT:
        name: custom/polygonize_lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/polygonize.gml
        type: vector

  - algorithm: qgis:voronoipolygons
    name: Standard voronoi
    params:
      BUFFER: 0.0
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/voronoi.gml
        type: vector

  - algorithm: qgis:voronoipolygons
    name: Vornoi with buffer region
    params:
      BUFFER: 10.0
      INPUT:
        name: points.gml
        type: vector
    results:
      OUTPUT:
        name: expected/voronoi_buffer.gml
        type: vector

  - algorithm: qgis:explodelines
    name: Explode lines
    params:
      INPUT:
        name: lines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/explode_lines.gml
        type: vector
        compare:
          fields:
            fid: skip

  - algorithm: qgis:explodelines
    name: Explode multilines
    params:
      INPUT:
        name: multilines.gml
        type: vector
    results:
      OUTPUT:
        name: expected/explode_multilines.gml
        type: vector
        compare:
          fields:
            fid: skip

#  - algorithm: qgis:findprojection
#    name: Find projection
#    params:
#      INPUT_LAYER:
#        name: custom/find_projection.gml
#        type: vector
#      TARGET_AREA: 151.1198,151.1368,-33.9118,-33.9003
#      TARGET_AREA_CRS: EPSG:4326
#    results:
#      OUTPUT_HTML_FILE:
#        name: expected/find_projection.html
#        type: file
#
  - algorithm: qgis:polygonfromlayerextent
    name: Standard polygon from layer extent
    params:
      BY_FEATURE: false
      INPUT_LAYER:
        name: polys.gml
        type: vector
    results:
      OUTPUT:
        name: expected/polygon_from_extent.gml
        type: vector

#  - algorithm: qgis:topologicalcoloring
#    name: Topological coloring
#    params:
#      INPUT_LAYER:
#        name: custom/adjacent_polys.gml
#        type: vector
#      MIN_COLORS: 4
#    results:
#      OUTPUT_LAYER:
#        name: expected/topocolor_polys.gml
#        type: vector
#
#  - algorithm: qgis:topologicalcoloring
#    name: Topological coloring w/ min distance
#    params:
#      BALANCE: '0'
#      INPUT_LAYER:
#        name: custom/adjacent_polys.gml
#        type: vector
#      MIN_COLORS: 4
#      MIN_DISTANCE: 4.0
#    results:
#      OUTPUT_LAYER:
#        name: expected/topocolor_polys_min_dist.gml
#        type: vector
#
  - algorithm: qgis:regularpoints
    name: Regular point with standard extent
    params:
      EXTENT: -0.9182432432432436,10.208108108108108,-3.1266891891891904,5.480067567567567
      INSET: 0.0
      IS_SPACING: false
      RANDOMIZE: false
      SPACING: 100
      CRS: EPSG:4326
    results:
      OUTPUT:
        name: expected/regular_points.gml
        type: vector
        compare:
          geometry:
            precision: 5

#  - algorithm: qgis:rectanglesovalsdiamondsvariable
#    name: Rectangular buffer shape
#    params:
#      HEIGHT: id
#      INPUT_LAYER:
#        name: custom/points_weighted.gml
#        type: vector
#      SEGMENTS: 36
#      SHAPE: '0'
#      WIDTH: id
#    results:
#      OUTPUT_LAYER:
#        name: expected/buffer_rect.gml
#        type: vector
#
#  - algorithm: qgis:rectanglesovalsdiamondsvariable
#    name: Diamond buffer shape
#    params:
#      HEIGHT: id
#      INPUT_LAYER:
#        name: custom/points_weighted.gml
#        type: vector
#      SEGMENTS: 36
#      SHAPE: '1'
#      WIDTH: id
#    results:
#      OUTPUT_LAYER:
#        name: expected/buffer_diamond.gml
#        type: vector
#
#  - algorithm: qgis:rectanglesovalsdiamondsvariable
#    name: Oval buffer shape
#    params:
#      HEIGHT: id
#      INPUT_LAYER:
#        name: custom/points_weighted.gml
#        type: vector
#      SEGMENTS: 36
#      SHAPE: '2'
#      WIDTH: id
#    results:
#      OUTPUT_LAYER:
#        name: expected/buffer_ovals.gml
#        type: vector

  - algorithm: qgis:creategridlines
    name: Lines grid 0.1 degree spacing
    params:
      CRS: EPSG:4326
      EXTENT: -0.10453905405405395,8.808021567567568,-2.5010055337837844,4.058021763513514
      HOVERLAY: 0.0
      HSPACING: 0.1
      VOVERLAY: 0.0
      VSPACING: 0.1
    results:
      OUTPUT:
        name: expected/create_grid_lines.gml
        type: vector

#  - algorithm: qgis:convertgeometrytype
#    name: polygon to centroid
#    params:
#      INPUT:
#        name: polys.gml
#        type: vector
#      TYPE: '0'
#    results:
#      OUTPUT:
#        name: expected/convert_poly_centroid.gml
#        type: vector
#
#  - algorithm: qgis:convertgeometrytype
#    name: polygon to multilinestring
#    params:
#      INPUT:
#        name: polys.gml
#        type: vector
#      TYPE: '3'
#    results:
#      OUTPUT:
#        name: expected/convert_poly_multiline.gml
#        type: vector
#
#  - algorithm: qgis:convertgeometrytype
#    name: polygon to nodes
#    params:
#      INPUT:
#        name: polys.gml
#        type: vector
#      TYPE: '1'
#    results:
#      OUTPUT:
#        name: expected/convert_poly_nodes.gml
#        type: vector
#
#  # - algorithm: qgis:extractbylocation
#  #   name: polygon intersecting points
#  #   params:
#  #     INPUT:
#  #       name: polys.gml
#  #       type: vector
#  #     INTERSECT:
#  #       name: custom/points.shp
#  #       type: vector
#  #     PRECISION: 0.0
#  #     PREDICATE: '[''intersects'']'
#  #   results:
#  #     OUTPUT:
#  #       name: expected/extract_by_location_intersection.gml
#  #       type: vector
#  #
#  # - algorithm: qgis:extractbylocation
#  #   name: points within polygons
#  #   params:
#  #     INPUT:
#  #       name: custom/points.shp
#  #       type: vector
#  #     INTERSECT:
#  #       name: polys.gml
#  #       type: vector
#  #     PRECISION: 0.0
#  #     PREDICATE: '[''within'']'
#  #   results:
#  #     OUTPUT:
#  #       name: expected/extract_by_location_within.gml
#  #       type: vector
#
  - algorithm: qgis:addfieldtoattributestable
    name: add float field
    params:
      FIELD_LENGTH: 10
      FIELD_NAME: field
      FIELD_PRECISION: 2
      FIELD_TYPE: '1'
      INPUT:
        name: custom/points.shp
        type: vector
    results:
      OUTPUT:
        name: expected/add_field.gml
        type: vector

#  - algorithm: qgis:randompointsinextent
#    name: Random point in extent, don't check result
#    params:
#      CRS: EPSG:4326
#      EXTENT: 3.9821361058601132,4.01984877126654,0.9948015122873343,1.0305293005671075
#      MIN_DISTANCE: 0.0
#      POINT_NUMBER: 5
#    results: {}

  - algorithm: script:selectbyattribute
    name: Select by attribute
    params:
      INPUT_LAYER:
        name: points.gml
        type: vector
    results:
      OUTPUT_LAYER:
        name: expected/selected_points.gml
        type: vector

  - algorithm: script:selectbyexpression
    name: Select by expression
    params:
      INPUT_LAYER:
        name: points.gml
        type: vector
    results:
      OUTPUT_LAYER:
        name: expected/select_by_expression.gml
        type: vector

  - algorithm: qgis:randomextract
    name: Random extract by number
    params:
      INPUT:
        name: custom/points_weighted.gml
        type: vector
      METHOD: 0
      NUMBER: 4
    results:
      OUTPUT:
        type: vector
        name: points_weighted.gml
        compare: false

  - algorithm: qgis:randomextract
    name: Random extract by percentage
    params:
      INPUT:
        name: custom/points_weighted.gml
        type: vector
      METHOD: 1
      NUMBER: 50
    results:
      OUTPUT:
        type: vector
        name: points_weighted.gml
        compare: false

  - algorithm: qgis:heatmapkerneldensityestimation
    name: Heatmap (Kernel density estimation)
    params:
      DECAY: 0.0
      INPUT:
        name: points.gml
        type: vector
      KERNEL: '0'
      OUTPUT_VALUE: '0'
      PIXEL_SIZE: 0.1
      RADIUS: 0.5
    results:
      OUTPUT:
        hash: f09384c64f56286ec4146a7b9a679cea7c6711ec4c7d77eec054e364
        type: rasterhash

  - algorithm: qgis:rasterlayerstatistics
    name: Raster layer statistics
    params:
      INPUT:
        name: dem.tif
        type: raster
      BAND: 1
    results:
      OUTPUT_HTML_FILE:
        name: raster_statistics.html
        type: regex
        rules:
          - 'Minimum value: 85.0'
          - 'Maximum value: 243.0'
          - 'Range: 158.0'
          - 'Sum: 19213301.982429504'
          - 'Mean value: 147.17197994967066'
          - 'Standard deviation: 43.9618116337985'
          - 'Sum of the squares: 252304334.52061242'