qgspoint.sip.in

/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/geometry/qgspoint.h                                         *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.pl again   *
 ************************************************************************/





class QgsPoint: QgsAbstractGeometry
{
%Docstring
Point geometry type, with support for z-dimension and m-values.

.. versionadded:: 3.0
%End

%TypeHeaderCode
#include "qgspoint.h"
%End
  public:
    static const QMetaObject staticMetaObject;

  public:

    QgsPoint( SIP_PYOBJECT x = Py_None, SIP_PYOBJECT y = Py_None, SIP_PYOBJECT z = Py_None, SIP_PYOBJECT m = Py_None, SIP_PYOBJECT wkbType = Py_None ) [( double x = 0.0, double y = 0.0, double z = 0.0, double m = 0.0, QgsWkbTypes::Type wkbType = QgsWkbTypes::Unknown )];
%Docstring
Construct a point with the provided initial coordinate values.

If ``wkbType`` is set to `QgsWkbTypes.Point`, `QgsWkbTypes.PointZ`, `QgsWkbTypes.PointM` or `QgsWkbTypes.PointZM`
the type will be set accordingly. If it is left to the default `QgsWkbTypes.Unknown`, the type will be set
based on the following rules:

- If only x and y are specified, the type will be a 2D point.
- If any or both of the Z and M are specified, the appropriate type will be created.

.. code-block:: python

       pt = QgsPoint(43.4, 5.3)
       pt.asWkt() # Point(43.4 5.3)

       pt_z = QgsPoint(120, 343, 77)
       pt.asWkt() # PointZ(120 343 77)

       pt_m = QgsPoint(33, 88, m=5)
       pt_m.m() # 5
       pt_m.wkbType() # QgsWkbTypes.PointM

       pt = QgsPoint(30, 40, wkbType=QgsWkbTypes.PointZ)
       pt.z() # nan
       pt.wkbType() # QgsWkbTypes.PointZ
%End
%MethodCode
    if ( sipCanConvertToType( a0, sipType_QgsPointXY, SIP_NOT_NONE ) && a1 == Py_None && a2 == Py_None && a3 == Py_None && a4 == Py_None )
    {
      int state;
      sipIsErr = 0;

      QgsPointXY *p = reinterpret_cast<QgsPointXY *>( sipConvertToType( a0, sipType_QgsPointXY, 0, SIP_NOT_NONE, &state, &sipIsErr ) );
      if ( sipIsErr )
      {
        sipReleaseType( p, sipType_QgsPointXY, state );
      }
      else
      {
        sipCpp = new sipQgsPoint( QgsPoint( *p ) );
      }
    }
    else if ( sipCanConvertToType( a0, sipType_QPointF, SIP_NOT_NONE ) && a1 == Py_None && a2 == Py_None && a3 == Py_None && a4 == Py_None )
    {
      int state;
      sipIsErr = 0;

      QPointF *p = reinterpret_cast<QPointF *>( sipConvertToType( a0, sipType_QPointF, 0, SIP_NOT_NONE, &state, &sipIsErr ) );
      if ( sipIsErr )
      {
        sipReleaseType( p, sipType_QPointF, state );
      }
      else
      {
        sipCpp = new sipQgsPoint( QgsPoint( *p ) );
      }
    }
    else if (
      ( a0 == Py_None || PyFloat_AsDouble( a0 ) != -1.0 || !PyErr_Occurred() ) &&
      ( a1 == Py_None || PyFloat_AsDouble( a1 ) != -1.0 || !PyErr_Occurred() ) &&
      ( a2 == Py_None || PyFloat_AsDouble( a2 ) != -1.0 || !PyErr_Occurred() ) &&
      ( a3 == Py_None || PyFloat_AsDouble( a3 ) != -1.0 || !PyErr_Occurred() ) )
    {
      double x = a0 == Py_None ? std::numeric_limits<double>::quiet_NaN() : PyFloat_AsDouble( a0 );
      double y = a1 == Py_None ? std::numeric_limits<double>::quiet_NaN() : PyFloat_AsDouble( a1 );
      double z = a2 == Py_None ? std::numeric_limits<double>::quiet_NaN() : PyFloat_AsDouble( a2 );
      double m = a3 == Py_None ? std::numeric_limits<double>::quiet_NaN() : PyFloat_AsDouble( a3 );
      QgsWkbTypes::Type wkbType = a4 == Py_None ? QgsWkbTypes::Unknown : static_cast<QgsWkbTypes::Type>( sipConvertToEnum( a4, sipType_QgsWkbTypes_Type ) );
      sipCpp = new sipQgsPoint( QgsPoint( x, y, z, m, wkbType ) );
    }
    else // Invalid ctor arguments
    {
      PyErr_SetString( PyExc_TypeError, QStringLiteral( "Invalid type in constructor arguments." ).toUtf8().constData() );
      sipIsErr = 1;
    }
%End




    virtual bool operator==( const QgsAbstractGeometry &other ) const;

    virtual bool operator!=( const QgsAbstractGeometry &other ) const;

    double x() const;
%Docstring
Returns the point's x-coordinate.

.. seealso:: :py:func:`setX`

.. seealso:: :py:func:`rx`
%End

    double y() const;
%Docstring
Returns the point's y-coordinate.

.. seealso:: :py:func:`setY`

.. seealso:: :py:func:`ry`
%End

    double z() const;
%Docstring
Returns the point's z-coordinate.

.. seealso:: :py:func:`setZ`

.. seealso:: :py:func:`rz`
%End

    double m() const;
%Docstring
Returns the point's m value.

.. seealso:: :py:func:`setM`

.. seealso:: :py:func:`rm`
%End





    void setX( double x );
%Docstring
Sets the point's x-coordinate.

.. seealso:: x

.. seealso:: :py:func:`rx`
%End

    void setY( double y );
%Docstring
Sets the point's y-coordinate.

.. seealso:: y

.. seealso:: :py:func:`ry`
%End

    void setZ( double z );
%Docstring
Sets the point's z-coordinate.

.. note::

   calling this will have no effect if the point does not contain a z-dimension. Use :py:func:`~QgsPoint.addZValue` to
   add a z value and force the point to have a z dimension.

.. seealso:: z

.. seealso:: :py:func:`rz`
%End

    void setM( double m );
%Docstring
Sets the point's m-value.

.. note::

   calling this will have no effect if the point does not contain a m-dimension. Use :py:func:`~QgsPoint.addMValue` to
   add a m value and force the point to have an m dimension.

.. seealso:: m

.. seealso:: :py:func:`rm`
%End

    QPointF toQPointF() const;
%Docstring
Returns the point as a QPointF.

.. versionadded:: 2.14
%End

    double distance( double x, double y ) const;
%Docstring
Returns the Cartesian 2D distance between this point and a specified x, y coordinate. In certain
cases it may be more appropriate to call the faster :py:func:`~QgsPoint.distanceSquared` method, e.g.,
when comparing distances.

.. seealso:: :py:func:`distanceSquared`

.. versionadded:: 3.0
%End

    double distance( const QgsPoint &other ) const;
%Docstring
Returns the Cartesian 2D distance between this point and another point. In certain
cases it may be more appropriate to call the faster :py:func:`~QgsPoint.distanceSquared` method, e.g.,
when comparing distances.

.. versionadded:: 3.0
%End

    double distanceSquared( double x, double y ) const;
%Docstring
Returns the Cartesian 2D squared distance between this point a specified x, y coordinate. Calling
this is faster than calling :py:func:`~QgsPoint.distance`, and may be useful in use cases such as comparing
distances where the extra expense of calling :py:func:`~QgsPoint.distance` is not required.

.. seealso:: :py:func:`distance`

.. versionadded:: 3.0
%End

    double distanceSquared( const QgsPoint &other ) const;
%Docstring
Returns the Cartesian 2D squared distance between this point another point. Calling
this is faster than calling :py:func:`~QgsPoint.distance`, and may be useful in use cases such as comparing
distances where the extra expense of calling :py:func:`~QgsPoint.distance` is not required.

.. seealso:: :py:func:`distance`

.. versionadded:: 3.0
%End

    double distance3D( double x, double y, double z ) const;
%Docstring
Returns the Cartesian 3D distance between this point and a specified x, y, z coordinate. In certain
cases it may be more appropriate to call the faster :py:func:`~QgsPoint.distanceSquared` method, e.g.,
when comparing distances.

.. seealso:: :py:func:`distanceSquared`

.. versionadded:: 3.0
%End

    double distance3D( const QgsPoint &other ) const;
%Docstring
Returns the Cartesian 3D distance between this point and another point. In certain
cases it may be more appropriate to call the faster :py:func:`~QgsPoint.distanceSquared` method, e.g.,
when comparing distances.

.. versionadded:: 3.0
%End

    double distanceSquared3D( double x, double y, double z ) const;
%Docstring
Returns the Cartesian 3D squared distance between this point and a specified x, y, z coordinate. Calling
this is faster than calling :py:func:`~QgsPoint.distance`, and may be useful in use cases such as comparing
distances where the extra expense of calling :py:func:`~QgsPoint.distance` is not required.

.. seealso:: :py:func:`distance`

.. versionadded:: 3.0
%End

    double distanceSquared3D( const QgsPoint &other ) const;
%Docstring
Returns the Cartesian 3D squared distance between this point and another point. Calling
this is faster than calling :py:func:`~QgsPoint.distance`, and may be useful in use cases such as comparing
distances where the extra expense of calling :py:func:`~QgsPoint.distance` is not required.

.. seealso:: :py:func:`distance`

.. versionadded:: 3.0
%End

    double azimuth( const QgsPoint &other ) const;
%Docstring
Calculates Cartesian azimuth between this point and other one (clockwise in degree, starting from north)

.. versionadded:: 3.0
%End

    double inclination( const QgsPoint &other ) const;
%Docstring
Calculates Cartesian inclination between this point and other one (starting from zenith = 0 to nadir = 180. Horizon = 90)
Returns 90.0 if the distance between this point and other one is equal to 0 (same point).

.. versionadded:: 3.0
%End

    QgsPoint project( double distance, double azimuth, double inclination = 90.0 ) const;
%Docstring
Returns a new point which correspond to this point projected by a specified distance
with specified angles (azimuth and inclination), using Cartesian mathematics.
M value is preserved.

:param distance: distance to project
:param azimuth: angle to project in X Y, clockwise in degrees starting from north
:param inclination: angle to project in Z (3D). If the point is 2D, the Z value is assumed to be 0.

:return: The point projected. If a 2D point is projected a 3D point will be returned except if
         inclination is 90. A 3D point is always returned if a 3D point is projected.

Example
-------

.. code-block:: python

       p = QgsPoint( 1, 2 ) # 2D point
       pr = p.project ( 1, 0 )
       # pr is a 2D point: 'Point (1 3)'
       pr = p.project ( 1, 0, 90 )
       # pr is a 2D point: 'Point (1 3)'
       pr = p.project (1, 0, 0 )
       # pr is a 3D point: 'PointZ (1 2 1)'
       p = QgsPoint( QgsWkbTypes.PointZ, 1, 2, 2 ) # 3D point
       pr = p.project ( 1, 0 )
       # pr is a 3D point: 'PointZ (1 3 2)'
       pr = p.project ( 1, 0, 90 )
       # pr is a 3D point: 'PointZ (1 3 2)'
       pr = p.project (1, 0, 0 )
       # pr is a 3D point: 'PointZ (1 2 3)'

.. versionadded:: 3.0
%End

    QgsVector operator-( const QgsPoint &p ) const;

    QgsPoint &operator+=( QgsVector v );

    QgsPoint &operator-=( QgsVector v );

    QgsPoint operator+( QgsVector v ) const;

    QgsPoint operator-( QgsVector v ) const;

    virtual bool isEmpty() const;

    virtual QgsRectangle boundingBox() const;

    virtual QString geometryType() const;

    virtual int dimension() const;

    virtual QgsPoint *clone() const /Factory/;

    virtual QgsPoint *snappedToGrid( double hSpacing, double vSpacing, double dSpacing = 0, double mSpacing = 0 ) const /Factory/;

    virtual bool removeDuplicateNodes( double epsilon = 4 * DBL_EPSILON, bool useZValues = false );

    virtual void clear();

    virtual bool fromWkb( QgsConstWkbPtr &wkb );

    virtual bool fromWkt( const QString &wkt );

    virtual QByteArray asWkb( QgsAbstractGeometry::WkbFlags = 0 ) const;

    virtual QString asWkt( int precision = 17 ) const;

    virtual QDomElement asGml2( QDomDocument &doc, int precision = 17, const QString &ns = "gml", QgsAbstractGeometry::AxisOrder axisOrder = QgsAbstractGeometry::AxisOrder::XY ) const;

    virtual QDomElement asGml3( QDomDocument &doc, int precision = 17, const QString &ns = "gml", QgsAbstractGeometry::AxisOrder axisOrder = QgsAbstractGeometry::AxisOrder::XY ) const;

    virtual QString asKml( int precision = 17 ) const;

    virtual void draw( QPainter &p ) const;

    virtual QPainterPath asQPainterPath() const;

    virtual void transform( const QgsCoordinateTransform &ct, QgsCoordinateTransform::TransformDirection d = QgsCoordinateTransform::ForwardTransform, bool transformZ = false ) throw( QgsCsException );

    virtual void transform( const QTransform &t, double zTranslate = 0.0, double zScale = 1.0, double mTranslate = 0.0, double mScale = 1.0 );

    virtual QgsCoordinateSequence coordinateSequence() const;

    virtual int nCoordinates() const;

    virtual int vertexNumberFromVertexId( QgsVertexId id ) const;

    virtual QgsAbstractGeometry *boundary() const /Factory/;

    virtual bool isValid( QString &error /Out/, int flags = 0 ) const;


    virtual bool insertVertex( QgsVertexId position, const QgsPoint &vertex );

    virtual bool moveVertex( QgsVertexId position, const QgsPoint &newPos );

    virtual bool deleteVertex( QgsVertexId position );


    virtual double closestSegment( const QgsPoint &pt, QgsPoint &segmentPt /Out/, QgsVertexId &vertexAfter /Out/, int *leftOf /Out/ = 0, double epsilon = 4 * DBL_EPSILON ) const;

    virtual bool nextVertex( QgsVertexId &id, QgsPoint &vertex /Out/ ) const;

    virtual void adjacentVertices( QgsVertexId vertex, QgsVertexId &previousVertex /Out/, QgsVertexId &nextVertex /Out/ ) const;


    virtual double vertexAngle( QgsVertexId vertex ) const;

%Docstring
Angle undefined. Always returns 0.0

:param vertex: the vertex id

:return: 0.0*
%End

    virtual int vertexCount( int /*part*/ = 0, int /*ring*/ = 0 ) const;

    virtual int ringCount( int /*part*/ = 0 ) const;

    virtual int partCount() const;

    virtual QgsPoint vertexAt( QgsVertexId /*id*/ ) const;

    virtual QgsPoint *toCurveType() const /Factory/;

    virtual double segmentLength( QgsVertexId startVertex ) const;


    virtual bool addZValue( double zValue = 0 );

    virtual bool addMValue( double mValue = 0 );

    virtual bool dropZValue();

    virtual bool dropMValue();

    virtual void swapXy();

    virtual bool convertTo( QgsWkbTypes::Type type );



    virtual QgsPoint *createEmptyWithSameType() const /Factory/;


    SIP_PYOBJECT __repr__();
%MethodCode
    QString str = QStringLiteral( "<QgsPoint: %1>" ).arg( sipCpp->asWkt() );
    sipRes = PyUnicode_FromString( str.toUtf8().constData() );
%End

  protected:

    virtual int childCount() const;

    virtual QgsPoint childPoint( int index ) const;


};


/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/core/geometry/qgspoint.h                                         *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.pl again   *
 ************************************************************************/