error while splitting a line

[qgib]

Author Name: Paolo Cavallini (@pcav)
Original Redmine Issue: 1677

Redmine category:digitising
Assignee: Marco Hugentobler

---

When attempting to slit a line (shapefile), it fails:

An error occured during feature splitting

Warning: X Error: [[BadGC]] (invalid GC parameter) 13
Major opcode: 56 (X_ChangeGC)
Resource id: 0x1e002c8
Warning: X Error: [[BadDrawable]] (invalid Pixmap or Window parameter) 9
Major opcode: 70 (X_PolyFillRectangle)
Resource id: 0x0
Warning: X Error: [[BadGC]] (invalid GC parameter) 13
Major opcode: 60 (X_FreeGC)
Resource id: 0x1e002c8
Warning: X Error: [[BadDrawable]] (invalid Pixmap or Window parameter) 9
Major opcode: 55 (X_CreateGC)
Resource id: 0x0
Warning: X Error: [[BadDrawable]] (invalid Pixmap or Window parameter) 9
Major opcode: 55 (X_CreateGC)
Resource id: 0x0
Warning: X Error: [[BadGC]] (invalid GC parameter) 13
Major opcode: 60 (X_FreeGC)
Resource id: 0x1e002ca
Warning: X Error: [[BadGC]] (invalid GC parameter) 13
Major opcode: 60 (X_FreeGC)
Resource id: 0x1e002c9
Warning: QMetaObject::connectSlotsByName: No matching signal for on_btnHelp_clicked()
bufferOriginalPrecision failed (TopologyException: depth mismatch at 1.63472e+06 4.78015e+06), trying with reduced precision
recomputing with precision scale factor = 1e+09
Scaler: offsetX,Y: 0,0 scaleFactor: 1e+09
[[ReScaler]]: offsetX,Y: 0,0 scaleFactor: 1e+09
bufferOriginalPrecision failed (TopologyException: depth mismatch at 1.63461e+06 4.77971e+06), trying with reduced precision
recomputing with precision scale factor = 1e+08
Scaler: offsetX,Y: 0,0 scaleFactor: 1e+08
[[ReScaler]]: offsetX,Y: 0,0 scaleFactor: 1e+08
bufferOriginalPrecision failed (TopologyException: depth mismatch at 1.6347e+06 4.78014e+06), trying with reduced precision
recomputing with precision scale factor = 1e+09

---

• sample_shp.tar.bz2 (Paolo Cavallini)

[qgib]

Author Name: Giovanni Manghi (@gioman)

---

I cannot replicate the error. Using qgis 1.2 rev. 11107. Closing, reopen if necessary.

---

• resolution was changed from to worksforme
• status_id was changed from Open to Closed