print composer rendering

[qgib]

Author Name: Jake Maier (Jake Maier)
Original Redmine Issue: 5601
Affected QGIS version: master
Redmine category:map_composer/printing

---

Creating a custom point will not render correctly in print composer. The legend will display the point ok but the composer will omit the turning of all elements of the custom points. I created for example a bird house as a custom point and the roof a 90 degree turned > did not turn in the rendering. Neither did the floor '|'. Again the legend did display everything correctly. This happened on the monitor, as a jpg export and as an paper print.
Thank you for all your time you spend helping to make this a fantastic program

Jake
PS see also brush piles on attachment

---

• NRCS_cost_share_map.jpg (Jake Maier)

[qgib]

Author Name: Paolo Cavallini (@pcav)

---

• fixed_version_id was configured as Version 2.0.0

[qgib]

Author Name: Paolo Cavallini (@pcav)

---

• category_id was configured as 33

[qgib]

Author Name: Jürgen Fischer (@jef-n)

---

• category_id was changed from 33 to Map Composer/Printing

[qgib]

Author Name: Nyall Dawson (@nyalldawson)

---

Can you please share your symbols and a sample project which demonstrates this issue?

---

• status_id was changed from Open to Feedback

[qgib]

Author Name: Giovanni Manghi (@gioman)

---

closing for lack of feedback.

---

• resolution was changed from to invalid
• status_id was changed from Feedback to Closed