Snapping options

[qgib]

Author Name: Thomas Nogatz (@TomNog)
Original Redmine Issue: 12236
Affected QGIS version: 2.8.0
Redmine category:digitising

---

Hello,

two problems with snapping options in QGIS 2.8:

1. mode Advanced is enabled by default. But Advanced mode is not really enabled after starting QGIS. You have to enable Current layer or All layers and then Advanced again to see the table of all layers (= Advanced mode). Once Advanced mode is enabled actually, the problem doesn't appear until you restart QGIS.
2. it is not possible to avoid intersections with more than one layer. Ofcourse one can activate "Avoid intersections" for more than one layer but it does only work for one layer - i suppose for the last edited layer.

Best wishes
Thomas

[qgib]

Author Name: Thomas Nogatz (@TomNog)

---

Platform: Windows 7

[qgib]

Author Name: Jürgen Fischer (@jef-n)

---

• operating_system was changed from to Windows
• os_version was changed from to 7

[qgib]

Author Name: Jürgen Fischer (@jef-n)

---

• version was changed from 2.6.0 to 2.8.0

[qgib]

Author Name: Giovanni Manghi (@gioman)

---

not sure I understand, the second issue is a regression/change of behavior from a previous qgis release?

---

• status_id was changed from Open to Feedback

[qgib]

Author Name: Giovanni Manghi (@gioman)

---

• category_id was configured as Digitising

[qgib]

Author Name: Raymond Nijssen (@raymondnijssen)

---

We checked this on the master release (2.13) today and it seems to work properly. Please check again and report within 14 days. If we don't get any more feedback we will close this issue.

Thanks!

[qgib]

Author Name: Giovanni Manghi (@gioman)

---

closing for lack of feedback.

---

• resolution was changed from to worksforme
• status_id was changed from Feedback to Closed