Error when `9p` mount type is selected on openSUSE Leap #4943

adamkpickering · 2023-06-12T21:23:01Z

Actual Behavior

An error popup appears when the 9p mount type is selected and Apply is clicked.

Steps to Reproduce

Factory reset.
Start Rancher Desktop. Wait for it to finish starting up.
Select the experimental 9p mount type under Preferences > Virtual Machine > Volumes > Mount Type
Click Apply

Result

An error popup appears:

Expected Behavior

Rancher Desktop should restart without errors.

Additional Information

logs.zip

/home/adam> rdctl shell mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
devtmpfs on /dev type devtmpfs (rw,nosuid,noexec,relatime,size=10240k,nr_inodes=758407,mode=755,inode64)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,inode64)
/dev/sr0 on /media/sr0 type iso9660 (ro,relatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8)
tmpfs on / type tmpfs (rw,relatime,mode=755,inode64)
tmpfs on /run type tmpfs (rw,nosuid,nodev,size=1216172k,nr_inodes=819200,mode=755,inode64)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
/dev/loop0 on /.modloop type squashfs (ro,relatime,errors=continue)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
/dev/disk/by-label/cidata on /mnt/lima-cidata type iso9660 (ro,relatime,nojoliet,overriderockperm,check=s,map=n,blocksize=2048,uid=0,dmode=700,fmode=700,iocharset=utf8)
mount0 on /home/adam type 9p (rw,dirsync,relatime,mmap,access=client,trans=virtio)
mount1 on /tmp/rancher-desktop type 9p (rw,dirsync,relatime,mmap,access=client,trans=virtio)
mount2 on /opt/rancher-desktop/resources/resources type 9p (rw,dirsync,relatime,mmap,access=client,trans=virtio)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
/dev/disk/by-label/data-volume on /mnt/data type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /etc type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /home type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /root type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /tmp type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /usr/local type ext4 (rw,relatime)
/dev/disk/by-label/data-volume on /var/lib type ext4 (rw,relatime)
cgroup_root on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755,inode64)
openrc on /sys/fs/cgroup/openrc type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/lib/rc/sh/cgroup-release-agent.sh,name=openrc)
none on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cpuset on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cpu on /sys/fs/cgroup/cpu type cgroup (rw,nosuid,nodev,noexec,relatime,cpu)
cpuacct on /sys/fs/cgroup/cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct)
blkio on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
memory on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
devices on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
freezer on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
net_cls on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
perf_event on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
net_prio on /sys/fs/cgroup/net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_prio)
hugetlb on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
pids on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
/dev/disk/by-label/data-volume on /root type ext4 (rw,relatime)
bpffs on /sys/fs/bpf type bpf (rw,relatime)

rancher-desktop/> rdctl shell cat /var/log/lima-init.log
ash: cd: line 0: can't cd to /home/adam/dev/rancher-desktop: No such file or directory
+ export 'LIMA_CIDATA_MNT=/mnt/lima-cidata'
+ '[' --local '!=' --local ]
+ ln -s /var/log/lima-init.log /var/log/cloud-init-output.log
+ LIMA_CIDATA_DEV=/dev/disk/by-label/cidata
+ mkdir -p -m 700 /mnt/lima-cidata
+ mount -o 'ro,mode=0700,dmode=0700,overriderockperm,exec,uid=0' /dev/disk/by-label/cidata /mnt/lima-cidata
+ read -r line
+ export 'LIMA_CIDATA_NAME=0'
+ read -r line
+ export 'LIMA_CIDATA_USER=adam'
+ read -r line
+ export 'LIMA_CIDATA_UID=1000'
+ read -r line
+ export 'LIMA_CIDATA_HOSTHOME_MOUNTPOINT=/home/adam'
+ read -r line
+ export 'LIMA_CIDATA_MOUNTS=3'
+ read -r line
+ export 'LIMA_CIDATA_MOUNTS_0_MOUNTPOINT=/home/adam'
+ read -r line
+ export 'LIMA_CIDATA_MOUNTS_1_MOUNTPOINT=/tmp/rancher-desktop'
+ read -r line
+ export 'LIMA_CIDATA_MOUNTS_2_MOUNTPOINT=/opt/rancher-desktop/resources/resources'
+ read -r line
+ export 'LIMA_CIDATA_MOUNTTYPE=9p'
+ read -r line
+ export 'LIMA_CIDATA_DISKS=0'
+ read -r line
+ export 'LIMA_CIDATA_CONTAINERD_USER='
+ read -r line
+ export 'LIMA_CIDATA_CONTAINERD_SYSTEM='
+ read -r line
+ export 'LIMA_CIDATA_SLIRP_DNS=192.168.5.3'
+ read -r line
+ export 'LIMA_CIDATA_SLIRP_GATEWAY=192.168.5.2'
+ read -r line
+ export 'LIMA_CIDATA_SLIRP_IP_ADDRESS=192.168.5.15'
+ read -r line
+ export 'LIMA_CIDATA_UDP_DNS_LOCAL_PORT=54864'
+ read -r line
+ export 'LIMA_CIDATA_TCP_DNS_LOCAL_PORT=34231'
+ read -r line
+ export 'LIMA_CIDATA_ROSETTA_ENABLED=false'
+ read -r line
+ export 'LIMA_CIDATA_ROSETTA_BINFMT=false'
+ read -r line
+ export 'LIMA_CIDATA_SKIP_DEFAULT_DEPENDENCY_RESOLUTION='
+ read -r line
+ awk '/^local-hostname:/ {print $2}' /mnt/lima-cidata/meta-data
+ LIMA_CIDATA_HOSTNAME=lima-0
+ hostname lima-0
+ LIMA_CIDATA_HOMEDIR=/home/adam.linux
+ useradd --home-dir /home/adam.linux --create-home --uid 1000 adam
+ echo 'adam ALL=(ALL) NOPASSWD:ALL'
+ LIMA_CIDATA_SSHDIR=/home/adam.linux/.ssh
+ mkdir -p -m 700 /home/adam.linux/.ssh
+ awk '/ssh-authorized-keys/ {flag=1; next} /^ *$/ {flag=0} flag {sub(/^ +- /, ""); gsub("\"", ""); print $0}' /mnt/lima-cidata/user-data
+ id -g adam
+ LIMA_CIDATA_GID=1000
+ chown -R 1000:1000 /home/adam.linux/.ssh
+ chmod 600 /home/adam.linux/.ssh/authorized_keys
+ MOUNT_SCRIPT=/etc/lima-mounts
+ echo '#!/bin/sh -eux'
+ awk -f- /mnt/lima-cidata/user-data
+ chmod +x /etc/lima-mounts
+ /etc/lima-mounts
+ mkdir -p /home/adam
+ mount -t 9p -o 'rw,trans=virtio,version=9p2000.L,msize=131072,cache=mmap,nofail' mount0 /home/adam
+ mkdir -p /tmp/rancher-desktop
+ mount -t 9p -o 'rw,trans=virtio,version=9p2000.L,msize=131072,cache=mmap,nofail' mount1 /tmp/rancher-desktop
+ mkdir -p /opt/rancher-desktop/resources/resources
+ mount -t 9p -o 'rw,trans=virtio,version=9p2000.L,msize=131072,cache=mmap,nofail' mount2 /opt/rancher-desktop/resources/resources
+ mkdir -p /var/lib/lima-init
+ IP_RENAME=/var/lib/lima-init/ip-rename
+ ip -o link
+ awk -f /usr/bin/lima-network.awk /var/lib/lima-init/ip-link /mnt/lima-cidata/network-config
+ chmod +x /var/lib/lima-init/ip-rename
+ ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 52:55:55:df:88:b5 brd ff:ff:ff:ff:ff:ff
+ /var/lib/lima-init/ip-rename
+ ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 52:55:55:df:88:b5 brd ff:ff:ff:ff:ff:ff
+ awk -f- /mnt/lima-cidata/network-config
+ awk -f- /mnt/lima-cidata/network-config
+ awk '/nameservers:/{flag=1; next} /^[^ ]/{flag=0} flag {gsub("^ +- +", ""); print}' /mnt/lima-cidata/user-data
+ tr '\n' ' '
+ DNS='192.168.5.3   '
+ '[' -n '192.168.5.3   ' ]
+ sed -i '/export dns/a dns="192.168.5.3   "' /usr/share/udhcpc/default.script
+ grep -q '^  remove_defaults: true' /mnt/lima-cidata/user-data
+ LIMA_CA_CERTS=/usr/share/ca-certificates/lima-init-ca-certs.crt
+ awk -f- /mnt/lima-cidata/user-data
+ '[' -s /usr/share/ca-certificates/lima-init-ca-certs.crt ]
+ export 'LIMA_CIDATA_MNT=/mnt/lima-cidata'
+ '['  '!=' --local ]
+ exec /mnt/lima-cidata/boot.sh
LIMA| Executing /mnt/lima-cidata/boot/00-modprobe.sh
Loading kernel module "fuse"
Loading kernel module "tun"
Loading kernel module "tap"
Loading kernel module "bridge"
Loading kernel module "veth"
Loading kernel module "ip_tables"
Loading kernel module "ip6_tables"
Loading kernel module "iptable_nat"
Loading kernel module "ip6table_nat"
Loading kernel module "iptable_filter"
Loading kernel module "ip6table_filter"
Loading kernel module "nf_tables"
Loading kernel module "x_tables"
Loading kernel module "xt_MASQUERADE"
Loading kernel module "xt_addrtype"
Loading kernel module "xt_comment"
Loading kernel module "xt_conntrack"
Loading kernel module "xt_mark"
Loading kernel module "xt_multiport"
Loading kernel module "xt_nat"
Loading kernel module "xt_tcpudp"
Loading kernel module "overlay"
LIMA| Executing /mnt/lima-cidata/boot/01-alpine-ash-as-bash.sh
LIMA| Executing /mnt/lima-cidata/boot/04-persistent-data-volume.sh
+ test -f /etc/alpine-release
+ DATADIRS='/etc /home /root /tmp /usr/local /var/lib'
+ awk '$2 == "/" {print $3}' /proc/mounts
+ '[' tmpfs '==' tmpfs ]
+ mkdir -p /mnt/data
+ '[' -e /dev/disk/by-label/data-volume ]
+ blkid
+ awk '{split($0,s,":"); sub(/\d$/, "", s[1]); print s[1]};'
+ grep data-volume
+ DATA_DISK=/dev/vda
+ command -v growpart
+ command -v resize2fs
+ growpart /dev/vda 1
NOCHANGE: partition 1 could only be grown by -33 [fudge=2048]
+ true
+ e2fsck -f -p /dev/disk/by-label/data-volume
data-volume: 9054/6553600 files (0.2% non-contiguous), 847771/26214144 blocks
+ resize2fs /dev/disk/by-label/data-volume
resize2fs 1.47.0 (5-Feb-2023)
The filesystem is already 26214144 (4k) blocks long.  Nothing to do!

+ mount -t ext4 /dev/disk/by-label/data-volume /mnt/data
+ '[' -d /mnt/data/etc ]
+ mkdir -p /etc
+ mount --bind /mnt/data/etc /etc
+ '[' -d /mnt/data/home ]
+ mkdir -p /home
+ mount --bind /mnt/data/home /home
+ '[' -d /mnt/data/root ]
+ mkdir -p /root
+ mount --bind /mnt/data/root /root
+ '[' -d /mnt/data/tmp ]
+ mkdir -p /tmp
+ mount --bind /mnt/data/tmp /tmp
+ '[' -d /mnt/data/usr/local ]
+ mkdir -p /usr/local
+ mount --bind /mnt/data/usr/local /usr/local
+ '[' -d /mnt/data/var/lib ]
+ mkdir -p /var/lib
+ mount --bind /mnt/data/var/lib /var/lib
+ mount -a
LIMA| Executing /mnt/lima-cidata/boot/05-lima-disks.sh
+ test 0 -gt 0
+ exit 0
LIMA| Executing /mnt/lima-cidata/boot/05-rosetta-volume.sh
+ '[' false '!=' true ]
+ exit 0
LIMA| Executing /mnt/lima-cidata/boot/06-etc-hosts.sh
+ sed -i /host.lima.internal/d /etc/hosts
+ echo -e '192.168.5.2\thost.lima.internal'
LIMA| Executing /mnt/lima-cidata/boot/07-etc-environment.sh
+ '[' -e /etc/environment ]
+ sed -i '/#LIMA-START/,/#LIMA-END/d' /etc/environment
+ cat /mnt/lima-cidata/etc_environment
+ command -v loginctl
+ rm -f /run/lima-guest-agent.sock
+ cp /mnt/lima-cidata/meta-data /run/lima-ssh-ready
LIMA| Executing /mnt/lima-cidata/boot/08-shell-prompt.sh
+ '[' 0 '=' default ]
LIMA| Executing /mnt/lima-cidata/boot/09-host-dns-setup.sh
+ command -v iptables
+ '[' -n 54864 ]
+ '[' 54864 -ne 0 ]
+ iptables-save
+ grep 'udp.*192.168.5.2:54864'
+ iptables -t nat -A PREROUTING -d 192.168.5.3 -p udp --dport 53 -j DNAT --to-destination 192.168.5.2:54864
+ iptables -t nat -A OUTPUT -d 192.168.5.3 -p udp --dport 53 -j DNAT --to-destination 192.168.5.2:54864
+ '[' -n 34231 ]
+ '[' 34231 -ne 0 ]
+ iptables-save
+ grep 'tcp.*192.168.5.2:34231'
+ iptables -t nat -A PREROUTING -d 192.168.5.3 -p tcp --dport 53 -j DNAT --to-destination 192.168.5.2:34231
+ iptables -t nat -A OUTPUT -d 192.168.5.3 -p tcp --dport 53 -j DNAT --to-destination 192.168.5.2:34231
LIMA| Executing /mnt/lima-cidata/boot/10-alpine-prep.sh
+ test -f /etc/alpine-release
+ BRANCH=edge
+ awk '-F=' '$1=="VERSION_ID" {print $2}' /etc/os-release
+ VERSION_ID=3.18.0
+ BRANCH=v3.18
+ URL=https://dl-cdn.alpinelinux.org/alpine/v3.18/main
+ grep -q '^https://dl-cdn.alpinelinux.org/alpine/v3.18/main$' /etc/apk/repositories
+ URL=https://dl-cdn.alpinelinux.org/alpine/v3.18/community
+ grep -q '^https://dl-cdn.alpinelinux.org/alpine/v3.18/community$' /etc/apk/repositories
+ usermod -p '*' adam
+ sed -i 's/AllowTcpForwarding no/AllowTcpForwarding yes/g' /etc/ssh/sshd_config
+ rc-service --ifstarted sshd reload
+ rc-service cgroups start
 * Mounting cgroup filesystem ... [ ok ]
+ rc-update add acpid
 * rc-update: acpid already installed in runlevel `default'; skipping
+ rc-service acpid start
 * Starting busybox acpid ... [ ok ]
LIMA| Executing /mnt/lima-cidata/boot/11-colorterm-environment.sh
+ '[' '!' -e /etc/ssh/sshd_config ]
+ grep -q COLORTERM /etc/ssh/sshd_config
+ sed -i 's/^AcceptEnv LANG LC_\*$/AcceptEnv COLORTERM LANG LC_*/' /etc/ssh/sshd_config
+ '[' -f /sbin/openrc-run ]
+ rc-service --ifstarted sshd reload
LIMA| Executing /mnt/lima-cidata/boot/20-rootless-base.sh
+ command -v systemctl
+ exit 0
LIMA| Executing /mnt/lima-cidata/boot/25-guestagent-base.sh
+ '[' 9p '=' reverse-sshfs ]
+ install -m 755 /mnt/lima-cidata/lima-guestagent /usr/local/bin/lima-guestagent
+ '[' -f /sbin/openrc-run ]
+ cat
+ chmod 755 /etc/init.d/lima-guestagent
+ rc-update add lima-guestagent default
 * rc-update: lima-guestagent already installed in runlevel `default'; skipping
+ rc-service lima-guestagent start
 * Caching service dependencies ... [ ok ]
 * Starting lima-guestagent ... [ ok ]
LIMA| Executing /mnt/lima-cidata/boot/30-install-packages.sh
+ INSTALL_IPTABLES=0
+ '['  '=' 1 ]
+ '['  '=' 1 ]
+ '[' 54864 -ne 0 ]
+ INSTALL_IPTABLES=1
+ '[' -d /mnt/lima-cidata/provision.dependency ]
+ '['  '=' 1 ]
+ grep -qF ELF
+ command -v apt-get
+ hexdump -C -n 4
hexdump: : No such file or directory
+ command -v dnf
+ command -v yum
+ command -v pacman
+ command -v zypper
+ command -v apk
+ pkgs=
+ '[' 9p '=' reverse-sshfs ]
+ '[' 1 '=' 1 ]
+ command -v iptables
+ '[' -n  ]
LIMA| Executing /mnt/lima-cidata/boot/35-setup-packages.sh
+ SETUP_DNS=0
+ '[' -n 54864 ]
+ '[' 54864 -ne 0 ]
+ SETUP_DNS=1
+ '[' -n 34231 ]
+ '[' 34231 -ne 0 ]
+ SETUP_DNS=1
+ '[' 1 '=' 1 ]
+ /mnt/lima-cidata/boot/09-host-dns-setup.sh
+ command -v iptables
+ '[' -n 54864 ]
+ '[' 54864 -ne 0 ]
+ iptables-save
+ grep 'udp.*192.168.5.2:54864'
-A PREROUTING -d 192.168.5.3/32 -p udp -m udp --dport 53 -j DNAT --to-destination 192.168.5.2:54864
-A OUTPUT -d 192.168.5.3/32 -p udp -m udp --dport 53 -j DNAT --to-destination 192.168.5.2:54864
+ '[' -n 34231 ]
+ '[' 34231 -ne 0 ]
+ grep 'tcp.*192.168.5.2:34231'
+ iptables-save
-A PREROUTING -d 192.168.5.3/32 -p tcp -m tcp --dport 53 -j DNAT --to-destination 192.168.5.2:34231
-A OUTPUT -d 192.168.5.3/32 -p tcp -m tcp --dport 53 -j DNAT --to-destination 192.168.5.2:34231
+ '[' 9p '=' reverse-sshfs ]
LIMA| Executing /mnt/lima-cidata/boot/40-install-containerd.sh
+ '['  '!=' 1 ]
+ '['  '!=' 1 ]
+ exit 0
LIMA| Executing /mnt/lima-cidata/provision.system/00000000
+ mkdir -p /bootfs
+ mount --bind / /bootfs
+ '[' -f /bootfs/etc/os-release ]
+ diff -q /etc/os-release /bootfs/etc/os-release
+ umount /bootfs
+ rmdir /bootfs
LIMA| Executing /mnt/lima-cidata/provision.system/00000001
+ fstrim /mnt/data
LIMA| Executing /mnt/lima-cidata/provision.system/00000002
+ sed -i -E 's/^#?MaxSessions +[0-9]+/MaxSessions 25/g' /etc/ssh/sshd_config
+ rc-service --ifstarted sshd reload
LIMA| Executing /mnt/lima-cidata/provision.system/00000003
+ '[' -d /mnt/data/root ]
+ mkdir -p /root
+ mount --bind /mnt/data/root /root
LIMA| Executing /mnt/lima-cidata/provision.system/00000004
+ mkdir -p /etc/docker
+ '[' -L /etc/docker/certs.d ]
+ rm /etc/docker/certs.d
+ '[' '!' -e /etc/docker/certs.d ]
+ '[' -d /Users/adam ]
+ '[' -d /home/adam ]
+ ln -s /home/adam/.docker/certs.d /etc/docker
LIMA| Executing /mnt/lima-cidata/provision.system/00000005
LIMA| Executing /mnt/lima-cidata/provision.system/00000006
+ rm -rf /var/lib/rancher/k3s/data
+ find /tmp -depth -mtime +3 -delete
LIMA| Executing /mnt/lima-cidata/provision.system/00000007
+ mount --make-shared /
+ mount --make-shared /etc
+ mount --make-shared /tmp
+ mount --make-shared /var/lib
LIMA| Executing /mnt/lima-cidata/provision.system/00000008
 * rc-update: crond already installed in runlevel `default'; skipping
 * Starting busybox crond ... [ ok ]
LIMA| Executing /mnt/lima-cidata/provision.system/00000009
+ usermod --append --groups docker adam
LIMA| Executing /mnt/lima-cidata/provision.system/00000010
Created a new local CA 💥
The local CA is now installed in the system trust store! ⚡️


Created a new certificate valid for the following names 📜
 - "localhost"

The certificate is at "./localhost.pem" and the key at "./localhost-key.pem" ✅

It will expire on 16 September 2025 🗓

LIMA| Executing /mnt/lima-cidata/provision.system/00000011
+ sed -i 's/^command_background/#command_background/' /etc/init.d/openresty
+ aiListConf=/usr/local/openresty/nginx/conf/allowed-images.conf
+ oldIAListConf=/usr/local/openresty/nginx/conf/image-allow-list.conf
+ setproxy='[ -f /usr/local/openresty/nginx/conf/allowed-images.conf ] && supervise_daemon_args="-e HTTPS_PROXY=http://127.0.0.1:3128 $supervise_daemon_args"'
+ sed -i '\#-f /usr/local/openresty/nginx/conf/allowed-images.conf#d' /etc/init.d/containerd
+ sed -i '\#-f /usr/local/openresty/nginx/conf/image-allow-list.conf#d' /etc/init.d/containerd
+ sed -i '/^supervise_daemon_args/a [ -f /usr/local/openresty/nginx/conf/allowed-images.conf ] && supervise_daemon_args="-e HTTPS_PROXY=http://127.0.0.1:3128 $supervise_daemon_args"' /etc/init.d/containerd
+ sed -i '\#-f /usr/local/openresty/nginx/conf/allowed-images.conf#d' /etc/init.d/docker
+ sed -i '\#-f /usr/local/openresty/nginx/conf/image-allow-list.conf#d' /etc/init.d/docker
+ sed -i '/^supervise_daemon_args/a [ -f /usr/local/openresty/nginx/conf/allowed-images.conf ] && supervise_daemon_args="-e HTTPS_PROXY=http://127.0.0.1:3128 $supervise_daemon_args"' /etc/init.d/docker
+ install -d -m755 /var/log/openresty
LIMA| Executing /mnt/lima-cidata/provision.system/00000012
LIMA| Exiting with code 0

Rancher Desktop Version

a81c562

Rancher Desktop K8s Version

1.26.5

Which container engine are you using?

moby (docker cli)

What operating system are you using?

Other Linux

Operating System / Build Version

openSUSE Leap 15.3

What CPU architecture are you using?

x64

Linux only: what package format did you use to install Rancher Desktop?

rpm

Windows User Only

No response

The text was updated successfully, but these errors were encountered:

jandubois · 2023-06-12T21:45:57Z

rdctl shell cat /var/run/lima-init.log

Sorry, my fault, that should be /var/log instead of /var/run :(

But I see /home/adam mounted, so we don't need the log:

mount0 on /home/adam type 9p (rw,dirsync,relatime,mmap,access=client,trans=virtio)

So I don't understand why we can't access the directory:

stdout: 'Directory /home/adam/.cache/rancher-desktop/k3s/v1.26.5+k3s1 does not exist\n',

Can you verify on the host that the directory exist?

adamkpickering · 2023-06-16T22:20:25Z

I updated the cat /var/log/lima-init.log command above.

rancher-desktop/> tree ~/.cache/rancher-desktop/
/home/adam/.cache/rancher-desktop/
├── k3s
│   └── v1.26.5+k3s1
│       ├── k3s
│       ├── k3s-airgap-images-amd64.tar.zst
│       └── sha256sum-amd64.txt
└── k3s-versions.json

So the directory appears to exist.

I went into the VM via rdctl shell to investigate. My home directory is present, but appears empty.

adamkpickering · 2023-10-30T18:30:38Z

This also occurs with the AppImage on Fedora 38.

adamkpickering added kind/bug Something isn't working platform/linux triage/next-candidate Discuss if it should be moved to "Next" milestone labels Jun 12, 2023

s0nea mentioned this issue Jun 15, 2023

Can't select 9p mount type #4536

Open

gaktive added this to the 1.10 milestone Jul 6, 2023

gaktive removed the triage/next-candidate Discuss if it should be moved to "Next" milestone label Jul 6, 2023

gaktive assigned s0nea Jul 10, 2023

gaktive added component/ui and removed component/ui labels Jul 10, 2023

gaktive unassigned s0nea Jul 17, 2023

gaktive modified the milestones: 1.10, 1.11 Jul 24, 2023

gaktive modified the milestones: 1.11, 1.10 Sep 5, 2023

gaktive removed this from the 1.11 milestone Sep 29, 2023

gunamata added this to the 1.12 milestone Oct 30, 2023

gunamata added the release-note label Oct 30, 2023

adamkpickering mentioned this issue Oct 30, 2023

Rancher Desktop fails to apply settings when 9p mount type is selected #5865

Closed

jandubois added the qase Issue is related to manual test in Qase label Oct 30, 2023

gaktive removed this from the 1.12 milestone Nov 13, 2023

jandubois mentioned this issue Mar 8, 2024

Bump rancher-desktop-lima to v0.19.0.rd6 #6592

Merged

jandubois closed this as completed in #6592 Mar 9, 2024

jandubois added this to the 1.13 milestone Mar 9, 2024

mook-as mentioned this issue Mar 13, 2024

Linux zip: 9p does not work in zip builds #6608

Open

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Error when `9p` mount type is selected on openSUSE Leap #4943

Error when `9p` mount type is selected on openSUSE Leap #4943

adamkpickering commented Jun 12, 2023 •

edited

Loading

jandubois commented Jun 12, 2023

adamkpickering commented Jun 16, 2023

adamkpickering commented Oct 30, 2023

Error when 9p mount type is selected on openSUSE Leap #4943

Error when 9p mount type is selected on openSUSE Leap #4943

Comments

adamkpickering commented Jun 12, 2023 • edited Loading

Actual Behavior

Steps to Reproduce

Result

Expected Behavior

Additional Information

Rancher Desktop Version

Rancher Desktop K8s Version

Which container engine are you using?

What operating system are you using?

Operating System / Build Version

What CPU architecture are you using?

Linux only: what package format did you use to install Rancher Desktop?

Windows User Only

jandubois commented Jun 12, 2023

adamkpickering commented Jun 16, 2023

adamkpickering commented Oct 30, 2023

Error when `9p` mount type is selected on openSUSE Leap #4943

Error when `9p` mount type is selected on openSUSE Leap #4943

adamkpickering commented Jun 12, 2023 •

edited

Loading