-
-
Notifications
You must be signed in to change notification settings - Fork 353
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
flash problem #10
Comments
I managed to make a flash, but now I have another problem |
I've done this problem too ... |
I’m sorry, but I don’t know what you mean. If you want a thermostat in your Sonoff, you have the Sonoff TH firmware with these functions: https://github.com/RavenSystem/esp-homekit-devices/wiki/Sonoff-TH |
I'm testing him now thanks. I now see 3 thermostat devices, a relay and a sensor. I would also like to build an LED strip |
I'm coding a firmware to use with a H802WIFI LED controller, but for now I have not enough time to finish it soon. |
Unfortunately, I'm not quite a good programmer to help you, but I can test it. |
What firmware have you used? |
Sonoff_TH_POW I followed the instructions |
Sonoff_TH_wPOW -> wPOW is an experimental feature that combine a fake motion sensor and a switch to create automations to help with power outages (wPOW = with Power Outage Warning). For a Thermostat function only you must use Sonoff_TH (without wPOW suffix). You have pre-compiled firmwares here: https://github.com/RavenSystem/esp-homekit-devices/releases If you are interested in wPOW functionality, here is an issue threat about it: #3 |
I uploaded the TH version, thank you. |
Works perfectly with the DHT22 sensor |
Many thanks. I have included that info in the wiki: https://github.com/RavenSystem/esp-homekit-devices/wiki/Sonoff-TH |
Does Sonoff S20 Firmware Work in Sonoff TOUCH? |
It is based on the ESP8285 chip |
Sonoff S20 Button and Sonoff Basic firmwares could work, but I haven't a Sonoff Touch to test it. Don't worry about ESP8285, that chip is an ESP8266 with integrated flash. |
I will test it as soon as possible and report. |
After about 5 to 7 hours of work, the device was turned off and did not respond. |
It's strange. I use 3 Sonoff TH in my house with heaters, and I don't have any problem. When you installed the last firmware, did you erase flash before? |
Yes before I upload a new firmware. |
The same problem happened to me with the esp32-idf. |
If so, can this be set to restore its last state. |
I'm working on a new firmware series that can be configured, and it will have the option to save actual state to restore it when it resets. |
This morning the thermostat was off. The problem is not in the power supply. The test thermostat is esp8266 with DHT22 attached and heater simulation LED what can be the problem and why does it turn off in the morning between 5 and 7 hours? |
I have some Sonoff TH working without any issue. Can you send logs from your Sonoff? |
Tomorrow I'll upload logs. |
I switched on the monitor all night. `Kristians-MacBook-Air:Sonoff_TH kristiandimitrov$ make monitor
|
Will anyone be so good to help me make a flash.
I need detailed instructions for the whole procedure.
The text was updated successfully, but these errors were encountered: