CHANGELOG.md

node-red-contrib-sun-position

Installation

Install of a specific Version in Node-Red

• change to the installation directory of Node-Red
• enter the command npm install node-red-contrib-sun-position@2.0.0

Install of a specific Version in Redmatic (on a Homematic)

• logon per ssh
• enter the commands in the order:
  • source /usr/local/addons/redmatic/home/.profile
  • cd /usr/local/addons/redmatic/var
  • npm install --save --no-package-lock --global-style --save-prefix="~" --production node-red-contrib-sun-position@2.0.0

Install of a specific Version in HomeAssistant

• go to the Supervisor
• go to the Node-Red AddOn
• stop the Node-Red AddOn
• edit config/node-red/package.json and remove the line with node-red-contrib-sun-position
• add unter the Configuration in the Node-Red options as npm_packages:

npm_packages:
  - node-red-contrib-sun-position@2.0.0

This can be also used to go back to an older Version.

3.0.0-alpha: enhancement

Breaking changes:

• removed all "Radiant" angle selection from typed input. The standard selection (which was previous the decimal degree output) gives now an angle based on the type selection (degree or radiant) of the configuration node. Version number is changed to 3 to reflect these API changes.

This is still a non stable development version!!

Changes:

• general

  • first implementation of tests with mocha and some changes due to the test implementation (inject enhance and delay-until)
    • revised error handling and output messages if the configuration of nodes is not correct (missing config node, missing latitude/longitude).
  • added type checking
  • allow of custom sun position set and rise angles in the configuration node
  • allow of custom angles in the configuration node
  • removed the following angle selections (replaced by existing ones without rad):
    • time by azimuth (rad)
    • time by elevation (set or rise in rad)
    • next time by elevation (set or rise in rad)
    • next rise time by elevation (rad)
    • next set time by elevation (rad)
  • sun-times and moon-times have now every angle in Radians and Degree

• inject enhance (time-inject)

  • added repletely inject with CRON expression
  • added automatic test case
    • basic inject
    • time based inject

• within-time-switch

  • changed state output in case time span is over midnight, because the shown times could be not correct #416
  • added automatic test case
    • basic test for configuration
    • test for message passing is for later

• sun-position + moon-position

  • smaller rework

• new Node delay-until which allows to delay messages until defined time

• blind-control and clock-timer

  • implement start and end time for rules #357
  • show rule edit dialog no longer modal to allow usage of JSON and JSONATA editor #432
  • separated renamed earliest/latest naming to make it clearer #441
  • reworked value caching mechanism; fixed bug #434

• blind-control

  • fix #421
  • added for oversteer blind position the possibility to select msg property, flow or global context #423
    • This has some limitations. Changes would only have effect if the oversteer are evaluated.
  • fix not working oversteer mode limitation #431
  • implemented optional alternative azimuth input like node-red-contrib-blindcontroller #430

• time-comp

  • better adjustable of next time, fixes #420
  • preprocessing rules
  • added automatic test case
    • basic test for configuration

2.1.1: bug fixes

• clock-timer
  • merged with blind-control

2.1.0: bug fixes

• blind-control
  • fix bug of handling not time constrained rules be first to last evaluated

2.0.13: bug fixes

• general
  • Fixed bug with string with placeholder, if value is 0 it was replaced with an empty string #400

2.0.12: bug fixes

• general
  • Fixed bug with wrong default values for Input type in blind-control and within-time-switch node, added console error in case it occurs again.
  • additional check for missing position configuration

2.0.10: maintenance release

• rerelease, no changed

2.0.9: maintenance release

• general

  • code cleanup
  • added string with placeholder as property value for more nodes (time-input, time comp, within-time, time-compare)

• clock-timer

  • isDisabled now stored to context as already implemented in blind-control

2.0.8: bug fixes

• general, but only used in blind-control + clock-time
  • added node.path (Node-Red 2.2) as possible output configuration, fallback to node.name or node.id if not defined
  • fixed string with placeholder output (string could not be entered)

2.0.7: maintenance release

• blind-control + clock-time

  • fixed blind-control example 3 and 4; clock-time example #388
    • the function node in the example can now simulate different days for testing at the same time on different days #389
  • renamed external given time property from .dNow to .now to maintain consistency to other nodes
  • nodes can be completely disables and enabled by incoming message (topic must be enableNode and disableNode) #365

• blind-control

  • after expire of manual override with -1 force to send output #387
  • add possibility to force output to first output when topic contains forceOutput
  • add possibility to add offset for the open/close position of the blind in active sun control #371

2.0.6: bug fixes

• time-inject fix for next property #364

• within-time-switch fix error with output value #363

• blind-control + clock-time

  • reduced default startup delay to may 1s
  • do output to first output on startup #369

• blind-control

  • implemented setSunDataFloorLength #367
  • for an oversteer rule can now be configured if it should be active if the sun is in the window (default as previous) #362

2.0.5: bug fixes

• clock-time

  • fix of check if payload and topic has changed to prevent send output on not changed payload/topic to output 1 #360
  • fix of not changeable context store #358

• blind-control

  • fix of not changeable context store #358
  • fix of not working '0' value for setBlindSettingsTop, setBlindSettingsBottom, setBlindSettingsIncrement and setBlindSettingsLevel config overwrite possibility #359

2.0.4: flow library fix

• no changes, republished 2.0.3 because of node-red flow library missing data

2.0.3: small fix + enhancement

• general

  • allow to set context store in configuration node #351
  • fixed randomNumber cached again #302 + #353
  • selectable range for random number #352

• blind-control + clock-time

  • allow to set context store, if not defined using settings from configuration node, otherwise default #351
  • readjusted rules UI, edit buttons only visible on mouse over
  • allows to enable/disable rules #349

2.0.1: small fix + enhancement

• general

  • implemented partly #338 + #308
  • fixed randomNumber cached #302
  • implemented randomNumber cached weekly

• blind-control

  • allow to setup a rule which will only overwrite slat #345 or topic
  • enhanced overwrite possibilities for slat. Additional msg.blindSlat as message property allowed or if the topic contains slatOverwrite the payload as slat position will be used - partly #346
  • for slat value make a deep clone as this could be any object and an object comparison

• clock-time

  • implement resetOnSameAsLastValue and ignoreSameValue #341
  • for payload value make a deep clone as this could be any object and perform an an object comparison

• time-comp

  • added next occurrence #339

2.0.0: enhancement

⚠ Warning: This Version could break existing flows. Please check your configuration!

🛑 Nodes (especially blind, time-control nodes) that were created or saved with this version do not work in older versions of the package. This affects the export / import of flows and when switching to an older version. It is therefore essential to create a backup before upgrading to this version!

• general

  • added only even and only odd weeks
  • added css property to moonPhases object an using css from here
  • for offset values of a random number a cached value will be used which will be only generated once per day. #302
  • selection of random number is available in more places
  • allow negative altitudePercent #259

• time-inject

  • fixed error if only flow/global context is set #252
  • fixed missing interval multiplier
  • added possibility for inject special values from config menu like default inject node
  • reworked simple interval (only simple interval)
    • added start timestamp
    • added selection for interval of days and weeks #313
    • added possibility to setup interval greater than 24.9 days (2147483647 - 32bit integer limit of NodeJs)

• within-time-switch

  • configurable msg.payload of the outgoing message #292

• moon-position

  • moon times will now be has additional property timesNext with the values for the times of the next day #307
  • added next moon phase date time #296

• blind-control + clock-time

  • added possibility to copy rules to clipboard and paste rules from clipboard
  • nodes have now always 2 outputs - may breaks existing flows!
    • First output is configurable.
  • redesigned rule conditions, now unlimited conditions could be defined
  • additional nodeID which will be also in the output (if set will override nodeId)
    • added as rule condition operator - usable in subFlows
  • No more messages are sent at the first output if the rule has changed but the payload (level/slat) has remained the same.
    • A message will be sent if the topic has changed.
  • overwrite will be written to node context and restored on recreation - allows overwrite be stable on deploy #300
  • No longer configuration of number of outputs. Node will always have two outputs
    • The message send to the first output will no longer be send on rule change, only on level/payload changes.
    • The message on the first output is fully configurable.
    • A property can be setup to be a string with placeholders. (The same placeholders can be used for the topic.):
      • blind-control
        • %name% - name of the node
        • %id% - ID of the node
        • %level% - level
        • %levelInverse% - level, but inverse
        • %slat% slat position
        • %code% - node.reason.code,
        • %state% - node.reason.state,
        • %description% - node.reason.description,
        • %rule% - ID of the active rule (if rule was active)
        • %mode% - current mode
        • %topic% - msg.topic of the incoming (trigger) message (if available)
        • %payload% - msg.payload of the incoming (trigger) message (if available)
      • clock-timer
        • %name% - name of the node
        • %id% - ID of the node
        • %code% - node.reason.code
        • %state% - node.reason.state
        • %description% - node.reason.description
        • %rule% - ID of the active rule (if rule was active)
        • %topic% - msg.topic of the incoming (trigger) message (if available)
        • %payload% - msg.payload of the incoming (trigger) message (if available)
  • The name of the node (or the id if no name is given in the config) can be configured in the output message - #238
    • this information will be send as msg.payload.name to the second output
  • ID of the node can be send
    • this information will be send as msg.payload.id to the second output if two outputs are configured
  • blind-control only changes
    • redesigned oversteer, now unlimited oversteer can defined
    • oversteer can be defined only valid for special mode
    • removed minimum altitude settings
      • for functionality the downward compatibility is given by automatic adoption of the setting as new first oversteer, which has the same effect.
      • no longer specific output of the reason (instead of "below the minimum elevation angle" will output "oversteer 1")
    • window settings as typedInput, which allow to use from flow, global context or environment - node can better used in a subFlow
    • per message set mode will be written to node context and to thus this will be stable on deploy
      • needs to delete values of context on change
    • current mode will no longer part of the node label/name, it will be displayed in the node state #321
    • added option to setup a rule which prevents the node to send anything out #280

• time compare and change + time span

  • fixed parsing of ECMA-262 (simplified ISO8601) Format times (e.g. 2021-05-17T08:45:00.000Z) #250
  • added parsing of full ISO8601 Format (e.g 2019-01-18T00:00:00.000Z, 2019-01-17T17:00:00.000-07:00, 2019-01-18T07:00:00.000+07:00)

1.2.4: maintenance + critical bugfix

• time-span

  • fixed bug that second operand displayed wrong in config!
  • fixed critical output bug #240

• blind-control + clock-time

  • added additional information in the output
    • last data which contain data from the last evaluation (when the rules was last time evaluated) - #223
      • for blind-control msg.blindCtrl.lastEvaluated.sunLevel, msg.blindCtrl.lastEvaluated.ruleLevel, msg.blindCtrl.lastEvaluated.ruleTopic, msg.blindCtrl.lastEvaluated.level, msg.blindCtrl.lastEvaluated.ruleId
      • for clock-time msg.timeCtrl.lastEvaluated.payload, msg.timeCtrl.lastEvaluated.topic, msg.timeCtrl.lastEvaluated.ruleId msg.timeCtrl.lastEvaluated.ruleTopic
    • msg.blindCtrl.name / msg.timeCtrl.name which is the name of the node (or the id if no name is given in the config) - #238
      • this information will be send as msg.payload.name to the second output if two outputs are configured
    • msg.blindCtrl.id / msg.timeCtrl.id which is the id of the node
    • this information will be send as msg.payload.id to the second output if two outputs are configured

• blind-control only

  • renamed msg.resetOnSameValue to msg.resetOnSameAsLastValue parameter to reset existing overwrite if msg.payload equals to position (node.previousData.level) (#223)
  • added slat position #250
  • in opposite to the mode maximize sunlight (⛄ Winter) added the minimize sunlight (🕶️) mode #284

1.2.3: BugFix

• within-time-switch
  • fix bug that time limitations does not work #236 upstream of #192)

1.2.2: BugFix

• general

  • internal object property sunset renamed to sunsetEnd and sunrise to sunriseStart (#213). This leads into problems with backward compatibilities. In any select box where sunset or sunrise is selected, it needs to reselect the right time.

• blind-control + clock-time

  • fix that note settings overwrite by message and payload does not working #233
  • fix bug with missing function #223

1.2.1: rework

• general

  • changed several links to documentation #151
  • replaced all remaining png type graphics with svg
  • added examples
  • minor bug fixes (#196, )

• blind-control + clock-time

  • Standardization and consolidation of the same and similar functions #186
    • minor bugs fixed with it (#198, #200)

• blind-control only

  • for Blind control the current used mode as operator (#197)
  • add a msg.resetOnSameValue parameter to reset existing overwrite if msg.payload equals to position (node.previousData.level) (#223)

• time inject

  • fixed bug, that interval between times does not start when load node and time in in the interval #189
  • smaller changes which leads into more options for outgoing data

• time-comp

  • redesign of the output, allows similar to the inject node set multiple properties
    • so the node becomes like a kind of a change node

• time-span

  • redesign of the output similar as time-comp

• within-time-switch

  • allows to have setup the time limitation also by msg, flow, global or env variable. #192

1.1.8: small enhancement

• time inject

  • allow to have a given number of timer events between two times #188
  • small enhancement in node status, shows interval if defined

• blind-control + clock-time

  • allow to change general node settings with incoming message #184

1.1.7: BugFix

• general

  • replaced some png type graphics with svg

• time inject

  • fix missing data property name. #185
  • fix not working offset #181 #182

• blind-control + clock-time

  • prevent irrelevant error when no rule with time constraint exists. #180
  • fix that autotrigger time from configuration is not used #186

• clock-time

  • fix that overrides with value false or 0 does not work #186

1.1.6: BugFix

• general
  • reworked JSONATA (preparation is now done on node creation)

1.1.5: BugFix

• general
  • fixed JSONATA are working

1.1.4: BugFix

• general

  • for a property compare implemented contain, containSome and comtainAll #158

• time inject

  • maybe fix of #159 by better memory cleanup on change
  • added possibility of define which time should be in payload (current or next) #163
  • now setup of payload, topic and additional payload is similar to the inject node of th newest Node-Red Version #172
  • time-inject label wrong #176

• within-time

  • fix bug not usable/visible offset for alternate times #170
  • added withinTimeStart and withinTimeEnd and withinTime property to message #156 + #166

• moon-position

  • moon-times now available #161
  • has now a isUp Boolean property which gives the state if the moon is Up #162
  • additional properties are positionAtRise and positionAtSet with position information on rise and set

• clock-time

  • fixed not working overrides #171
  • fixed not existing blindCtrl property

• blind-control + clock-time

  • first implementation of allow override expire by rules #173 (not fully tested)

1.1.3: maintenance

only documentation changes

• moved contents of the readme to the wiki

1.1.2: BugFix

• blind-control + clock-time
  • fixed Error Cannot read property 'timeType' of undefined #152

1.1.1: BugFix + maintenance

• blind-control + clock-time

  • fixed missing topic from rules #150
  • fixed last until rule will not be evaluated
  • maybe fix of #152

• general

  • for any simple time input added possibility to add time as format HH:MM UTC or HH:MM:SS UTC to force UTC Format
  • added time calculation by azimuth and elevation (is not fully tested) #148

1.1.0: mayor release

• time-inject
  • added possibility for interval inject #135
  • added warning sign if node needs to be opened, saved and deployed
• blind-control + clock-time
  • fixed and/Or condition of rule conditions #138
  • renamed priority for Overrides to importance
  • implemented importance for rules #137
  • fixed rules "priority" execution #139
  • enhanced autoTrigger rule selection #143
• within-time
  • fixed month limitation #141
  • Removed options for message resend!
  • Removed initial calculation trigger
  • fixed internal error if a time could not evaluated into better error
• time-comp
  • fixed out value, if context store or any special message object
• removed interval-inject --> has moved to time-inject

I a Node has a warning sign on the label the node needs to be opened, saved and deployed to fix the label:

1.0.17: small enhancement

• inspired by #132 added for a property the possibility to control by
  • is DST (Daylight saving)
  • week of the year
  • is week of the year even
  • day of the year
  • is day of the year even With this for example the time-inject could distinguish between using standard or alternate time if Daylight saving or the week of the year is less or below a number.

1.0.16: BugFix

• general

  • fix #119
    • if a positive offset is used the next time was calculated wrong

• blind-control + clock-time

  • fix #128 for blind-control + clock-time
    • with #127 the also overrides with a priority higher than 0 will be expire. The documentation is changed to reflect this.
  • fixed problem that an override can not set as not expiring
  • fixed state text and level output if level-value of -1 is used

1.0.15: BugFix + maintenance

• blind-control + clock-time

  • fixed not visible offset field in rule edit for sun/moon times

• time-Inject, within-time

  • enhanced refresh for tooltip on offset or multiplier change

1.0.14: BugFix

• blind-control + clock-time
  • fixed bug for day of the week (String/integer format)

1.0.13: BugFix

• time-inject

  • fix not visible time input field

• blind-control + clock-time + time-inject + within-time

  • fixed bug where default expire time is not considered #112
  • reduced usage of context for store data

• time-comp / time-span

  • fixed after first match #115

• general

  • i18N

1.0.12: BugFix + enhancement

fixes

• general
  • BugFix: Allow 0 as value for any time input, mainly for time-compare or time-span node, but affects potentially all nodes.
  • BugFix: random offset #90 now working as expected
  • BugFix: node error output for time input if time can not be evaluated has missing original message.
  • prepared new Node interval-inject (not finished, not available) - is the same as standard node-red inject node for intervals with start and end of interval able to use sun-times.

enhancements

• Blind-control allows now granular settings of topic
• documentation enhanced for clock-timer and general

1.0.11: enhancement

• blind-control + clock-time + time-inject + within-time
  • implement #92 additional date restriction

1.0.10: bug fix

• general

  • next try for #102

• sun-position + moon-position

  • implements #81 - now it is possible to have msg.latitude and msg.longitude (or msg.lat and msg.lon) to override settings in configuration node. The configuration Node still needs to be configured properly.

1.0.9: bug fix

• general

  • fixed #102 again - massive changes in the library with cleanup lot of functions
  • fixed and reworked caching of calculated sunTimes, MoonTimes

• blind-control + clock-time

  • documentation
  • if in startup delay, the reason code is set to NaN and node state, reason description stated that node is in startup
  • after startup delay ended default output will be send (due to reason code change)

• clock-time

  • additional to reason or rule change, the payload will also output on these changes
    • if type of payload has changed
    • if payload is of type string, number or boolean and value of the payload has changed
      • changes on arrays, objects will not detected

1.0.8: bug fix

• time-inject

  • fixes that time inject will do a recalculation every 1 ms (Problem can only occurs if the time constraints are used.) #106

• blind-control + clock-time

  • documentation
  • i18n

1.0.7: bug fix

• general

  • added additional caching of sun times calculation to reduce calculation load

• blind-control + clock-time

  • fixed start delay setting causing no output at all
  • i18n, spelling, documentation

1.0.6: bug fix

• general

  • fixed #102 - nodes calculate wrong sun times
    • this happend between midnight - TimezoneOffset to midnight
    • maybe fixes also #98
  • fixed broken rule check for time-span #103

• blind-control + clock-time

  • first implementation of #92 (needs more test)

1.0.5: bug fix

• blind-control + clock-time
  • add start delay setting where a time can be defined where no output

1.0.4: bug fix

• within-time-switch
  • fixed error day selection #100
  • fixed wrong working month selection
• sun-position
  • added lastUpdateStr to payload to get the original calculation base time
• moon-position
  • added lastUpdateStr to payload to get the original calculation base time

1.0.3: bug fix

• blind-control
  • fixed maximum rules #96

1.0.2: bug fix

• time-comp

  • fixed #93

• general

  • added random offset (not fully tested) #90
  • Improve display of days of the week and months (first try) #91

1.0.1: bug fix

• time-inject
  • fix downward compatibility for older node settings

1.0.0: mayor release

• new Node: clock-time

  • This is a simplified blind-control node, with only time rules and any payload.
  • it is ideal for dimmers, Christmas lights, ...

• time-inject

  • added month selection
  • added even/odd day selection

• within-time

  • added day selection
  • added month selection
  • added even/odd day selection

• blind control

  • added possibility to limit rules for several days
  • added validation of rules (shows a hint if a rule in invalid)
  • added day selection to rules
  • added month selection to rules
  • added even/odd day selection for rules
  • added auto Trigger capability

• general

  • added on several settings the possibility to use payload if the topic of an incoming message contains special value.
  • fixed smaller problems

• The big jump in the version number is not only due to the amount change, but rather otherwise.

  • The Version starting with 1... will show that this node is tested and working with Node-Red above 1...
  • After this release, no major changes are planned in the next time and the node is for the time being feature complete. This fits a version number 1.. better than 0..

0.5.3 + 0.5.4: BugFix

• general
  • fix for #68

0.5.2: BugFix

• general
  • fix for error on getting tooltip #69

0.5.1: BugFix and Maintenance Release

• general
  • fix for week number calculation when in daylight saving #65
  • if time output as object the week is now an extra object with properties
    • iso array [year, week]
    • week number week number
    • year number full year
    • even boolean is true if week is even
• blind control
  • fix for #66 if the blind not uses values between 0 and 1
  • fix for #67 mixed earliest and latest settings
  • enhanced output of the rules
  • change logic of rule execution: From rules within Until rules will now considered.
    • change should have no affect if rule setup is equal to the examples, that time restricted rules separated in first only until and afterwards only from rules

0.5.0: mayor release for blind control

• configuration

  • switched latitude and longitude and added openstreetmap link/map for the position to prevent issues caused by latitude and longitude (maybe cause of #55)
  • added german translation for latitude and longitude

• time inject

  • added output of week number to enhanced date output
  • enhanced name output for enhanced date output

• sun-position

  • fixed #52 bug with implementation
    • added positionAtSolarNoon as additional payload property with the position data of the sun at solar noon
  • fixed problem with msg.ts not considered as used timestamp

• moon-position

  • fixed problem with msg.ts not considered as used timestamp

• blind control

  • fixed #61 by removing misleading angle
  • fixed #62 setMode can now deactivate sun control
  • added resetOverwrite additional property #54
  • add possibility to have a exact priority comparisons (e.g. only reset a specific priority)
  • redesigned rule input by dialog
  • removed previous reset option for level operator, will now be done by new special level type
  • added new type of Level: NotDefined, where for absolute rules default or sunControl will be used and for min/max the rule will be reset.
    • This will allow to have only one type of time rules (until/from) which could cover whole day.
    • Hopefully this makes rules easier.
  • added per rule two different times and two different conditions
    • allows to define more scenarios
    • allows to reduce amount of needed rules.

0.4.10: critical bug fix

• fixed bug #57 with the code prepared for Node-Red 1.0. The recommend way for be backward compatible doesn't work. This is also confirmed by @knolleary.

0.4.9: small enhancement

• implemented #52 as height of the sun in the sky in percent (0~100 with 100% being at solarnoon and 0% being completely down) - altithudePercent
• fixed bug for #53, no longer send blind position in override mode
• updated dependencies
• more changes for node-red 1.0 https://nodered.org/blog/2019/09/20/node-done
• added node-red 0.19.0 as required version

0.4.8: Maintenance Release

• update dependencies

0.4.7: BugFix Release

• fix problems
  • if time tooltip has wrong format
  • if not initialized
  • on exception get backend data

0.4.6: Maintenance Release

• time-comp
  • fixed css for multiselect in node-red Beta
  • added tooltip for time select fields
• time-span
  • added tooltip for time select fields
• enhanced readme and added links to changelog #43

0.4.5: Maintenance Release

• time-compare
  • node added option "otherwise"
• time-span
  • node added option "otherwise"
  • fixed error time-span output
• dayOfMonth
  • fixed wrong entry in type edit
• fixed exception on empty date in offset calculation

0.4.4: Maintenance Release

• all previous changes
• enhanced Documentation
• redesigned minimum and maximum rule level types again

0.4.4-beta: Maintenance Release

• fixed critical problem in sun - calculating Julian cycle which leads into wrong sun times if it is calculated at certain times
  • #37
  • #39
• fixed problems on RedMatic call of getBackendData
  • tooltip with resolved time on typeInput now also available in RedMatic
• i18N reworked
  • for compares using mathematical signs for equal, unequal, greater than, less than
  • added more Unicode symbols
• added direct moon phase output
• added compare to current moon phase for conditions
• blind control
  • fixed error on empty ruleset
  • add clear button for rules
  • add sort button in UI editor
  • reworked minimum/maximum blind position settings by rule, enhanced in documentation
    • addresses #36
• enhanced documentation
  • fix #31
  • fix #33
• added possibility for inverted open / close settings #40
• changed lot of internal
  • cleanup procedures
  • fixed problems with test function #32
  • optimized code to ES6 possibilities
  • changed esLint rules to be more restrictive
  • fixed a lot of wrong usages of arrow function for data validation
• optimized access to backend services
• changed lot of UTC time compare problems #34

0.4.3: Maintenance Release

• Version was unpublished due to critical Bugs

0.4.1 / 0.4.2: Maintenance Release

• Version was unpublished due to critical Bugs

0.4.0: Maintenance Release

• i18N for type-input options
• time inject
  • introduces possibility for select if time additional output should be current or next day
• blind control
  • added additional oversteer settings (oversteer3)
  • added minimum delta for changes by sun control
  • added minimum and maximum blind position settings by rule
  • enhanced documentation
• start of changelog

0.3.4: Maintenance Release

• blind control
  • added additional oversteer settings (oversteer2)
  • enhanced documentation
• fixed links in documentation

0.3.3: Maintenance Release

• preparations for node-red 1.0
• fixed UTC time compare problem in blind-control
• enhanced config for own state time output format

0.3.2: Maintenance Release

• prepared for own timezone settings
• added configuration for own state time output format
• added custom ISO output format
• some preparations for node-red 1.0