The RES-Service Protocol Specification

Version: 1.2.2

Introduction

This document uses the definition of resource, model, collection, value, messaging system, service, client, and gateway as described in the RES Protocol specification.

The RES-Service protocol is used in communication between the services and the gateways.

Requests

Services listens to requests published by the gateways and services over the messaging system. A request consists of a subject (also called topic) and a payload.

Request subject

A request subject is a string identifying the type of request, which resource it is made for, and in case of call and auth requests, which method is called.
It has the following structure:

<type>.<resourceName>.<method>

type - the request type. May be either access, get, call, or auth.
resourceName - the resource name of the resource ID.
method - the request method. Only used for call or auth type requests.

Request payload

The payload is a JSON object containing the request parameters.
If no parameters are provided, the payload may be empty (0 bytes).

The content of the payload depends on the subject type.

Response

When a request is received by a service, it should send a response as a JSON object. The object MUST have one of the following members, dependent upon whether the response is a successful result, a resource, or an error:

result
Is REQUIRED on success if resource is not set.
SHOULD be ignored if error or resource is set.
The value is determined by the request subject.

resource
MUST be omitted if the request type is not call or auth.
Is REQUIRED on success if result is not set.
SHOULD be ignored if error is set.
The value MUST be a valid resource reference.

error
Is REQUIRED on error.
MUST be omitted on success.
The value MUST be an error object.

Error object

On error, the error member contains a value that is an object with the following members:

code
A dot-separated string identifying the error.
Custom errors SHOULD begin with the service name.
MUST be a string.

message
A simple error sentence describing the error.
MUST be a string.

data
Additional data that may be omitted.
The value is defined by the service.
It can be used to hold values for replacing placeholders in the message.

Pre-defined errors

There are a number of predefined errors.

Code	Message	Meaning
`system.notFound`	Not found	The resource was not found
`system.invalidParams`	Invalid parameters	Invalid parameters in method call
`system.invalidQuery`	Invalid query	Invalid query or query parameters
`system.internalError`	Internal error	Internal error
`system.methodNotFound`	Method not found	Resource method not found
`system.accessDenied`	Access denied	Access to a resource or method is denied
`system.timeout`	Request timeout	Request timed out

Pre-response

When a service receives a request, and before a response is sent, the service may send a pre-response. A service should only send a pre-response when the time it takes to handle the request might exceed the default timeout limit of the requester.
The pre-response is a UTF-8 encoded key:"value" string without any leading white space.
It should contain the following key:

timeout
Sets the request timeout. The value is the new timeout in milliseconds calculated from when the requester receives the pre-response. The requester should honor this timeout.
Example payload (15 second timeout):

timeout:"15000"

Request types

Access request

Subject
access.<resourceName>

Access requests are sent to determine what kind of access a client has to a resource. The service handling the access request may be different from the service providing the resource.
The request payload has the following parameters:

cid
Connection ID of the client connection requesting connection.
The value is generated by the gateway for every new connection.
MUST be a string.

token
Access token that MAY be omitted if the connection has no token.
The value is defined by the service issuing the token.

query
Query part of the resource ID without the question mark separator.
MUST be omitted if the resource ID has no query.
MUST be a string.

Result

get
Flag telling if the client has access to get (read) the resource, including any resource recursively referenced by non-soft resource references.
May be omitted if client has no get access.
MUST be a boolean.

call
A comma separated list of methods that the client can call. Eg. "set,foo,bar".
May be omitted if client is not allowed to call any methods.
Value may be a single asterisk character ("*") if client is allowed to call any method.

Error

Any error response will be treated as if the client has no access to the resource.
A system.notFound error MAY be sent if the resource ID doesn't exist.
A system.invalidQuery error MAY be sent if the query is malformed or invalid.

Get request

Subject
get.<resourceName>

Get requests are sent to get the JSON representation of a resource.
The request payload may have the following parameter:

query
Query part of the resource ID without the question mark separator.
MUST be omitted if the resource ID has no query.
MUST be a string.

Result

model
An object containing the named properties and values of the model.
MUST be omitted if collection is provided.

collection
An ordered array containing the values of the collection.
MUST be omitted if model is provided.

query
Normalized query without the question mark separator.
Different queries (eg. a=1&b=2 and b=2&a=1) that results in the same query resource should have the same normalized query (eg. a=1&b=2). The normalized query will be used by the gateway in query requests, and in get requests triggered by a system reset event.
MAY be included even if the request had no query parameter.
MUST be omitted if the resource is not a query resource.
MUST NOT be omitted if the resource is a query resource.
MUST be a string.

Error

Any error response will be treated as if the resource is currently unavailable.
A system.notFound error SHOULD be sent if the resource ID doesn't exist.
A system.invalidQuery error SHOULD be sent if the query is malformed or invalid.

Call request

Subject
call.<resourceName>.<method>

Call requests are sent to invoke a method on the resource.
The request payload has the following parameter:

cid
Connection ID of the client connection requesting connection.
The value is generated by the gateway for every new connection.
MUST be a string.

token
Access token that MAY be omitted if the connection has no token.
The value is defined by the service issuing the token.

query
Query part of the resource ID without the question mark separator.
MUST be omitted if the resource ID has no query.
MUST be a string.

params
Method parameters as defined by the service or by the appropriate pre-defined call method.
MAY be omitted.

Result

The result is defined by the service, or by the appropriate pre-defined call method. The result may be null.

Resource

A resource response may be sent instead of a result.

Error

Any error response indicates that the method call failed and had no effect.
A system.notFound error SHOULD be sent if the resource ID does not exist.
A system.methodNotFound error SHOULD be sent if the method does not exist.
A system.invalidParams error SHOULD be sent if any required parameter is missing, or any parameter is invalid.
A system.invalidQuery error SHOULD be sent if the query is malformed or invalid.

Auth request

Subject
auth.<resourceName>.<method>

Auth requests are sent to invoke an authentication method on the resource.
It behaves in a similar way as the call request, but does not require access. Auth requests also includes additional parameters.
The request payload has the following parameter:

cid
Connection ID of the client connection requesting connection.
The value is generated by the gateway for every new connection.
MUST be a string.

token
Access token that MAY be omitted if the connection has no token.
The value is defined by the service issuing the token.

query
Query part of the resource ID without the question mark separator.
MUST be omitted if the resource ID has no query.
MUST be a string.

params
Method parameters as defined by the service.
MAY be omitted.

header
HTTP headers used on client connection. May be omitted.
MUST be a key/value object, where the key is the canonical format of the MIME header, and the value is an array of strings associated with the key.

host
The host on which the URL is sought by the client. Per RFC 2616, this is either the value of the "Host" header or the host name given in the URL itself.
May be omitted.
MUST be a string.

remoteAddr
The network address of the client that sent the request.
The format is not specified, and it may be omitted.
MUST be a string.

uri
The unmodified Request-URI of the Request-Line (RFC 2616, Section 5.1) as sent by the client when connecting to the gateway.
May be omitted.
MUST be a string.

Result

The result is defined by the service, and may be null.
A successful request MAY trigger a connection token event. If a token event is triggered, it MUST be sent prior to sending the response.

Resource

A resource response may be sent instead of a result.

Error

Any error response indicates that the authentication failed and had no effect. A failed authentication SHOULD NOT trigger a connection token event.

A system.notFound error SHOULD be sent if the resource ID does not exist.
A system.methodNotFound error SHOULD be sent if the method does not exist.
A system.invalidParams error SHOULD be sent if any required parameter is missing, or any parameter is invalid.
A system.invalidQuery error SHOULD be sent if the query is malformed or invalid.

Pre-defined call methods

There are a set of call request methods are predefined. A service may implement any of these methods as long as it conforms to this specification.
The parameters described for each call method refers to the params parameter of the call request.

Set call request

Subject
call.<resourceName>.set

A set request is used to update or delete a model's properties.

Parameters
The parameters SHOULD be a key/value object describing the properties to be changed. Each property should have a new value or a delete action. Unchanged properties SHOULD NOT be included.
If any of the model properties are changed, a model change event MUST be sent prior to sending the response.
MUST NOT be sent on collections.

New call request

DEPRECATED: Use resource response instead.

Subject
call.<resourceName>.new

A new request is used to create new resources.

Params

For new models, the parameters SHOULD be an object containing the named properties and values of the model.
For new collections, the parameters SHOULD be an ordered array containing the values of the collection.

Result
MUST be a resource reference to the new resource.

Events

Services may send events to the messaging system that may be received by any gateway or service. Events are not persisted in the system, and any event that was not subscribed to when it was sent will not be retrievable. There are three types of events:

resource events - affects a single resource
connection events - affects a client connection
system events - affects the system

Resource events

Subject event.<resourceName>.<eventName>

Resource events are sent for a given resource, and MUST be sent by the same service that handles the resource's get and call requests. This is to ensure all responses and events for a resource are sent in chronological order.

Events and responses from different resources may be sent in non-chronological order in respect to one another, even if the resources are handled by the same service, or if the resources has references to each other.

When a resource is modified, the service MUST send the defined events that describe the changes made. If a service fails to do so, maybe due to a program crash or a service loading stale data on restart, it MUST send a System reset event for the affected resources.

Model change event

Subject
event.<resourceName>.change

Change events are sent when a model's properties has been changed.
MUST NOT be sent on collections.
The event payload has the following parameter:

values
A key/value object describing the properties that was changed.
Each property should have a new value or a delete action.
For changes in data values, the value is changed in its entirety.
Unchanged properties SHOULD NOT be included.

Example payload

{
  "values": {
    "myProperty": "New value",
    "unusedProperty": { "action": "delete" }
  }
}

Delete action

A delete action is a JSON object used when a property has been deleted from a model. It has the following signature:

{ "action": "delete" }

Collection add event

Subject
event.<resourceName>.add

Add events are sent when a value is added to a collection.
Any previous value at the same index or higher will implicitly be shifted one step to a higher index.
MUST NOT be sent on models.
Values cannot be added to arrays inside data values, but the data value must be changed in its entirety.
The event payload has the following parameters:

value
Value that is added.

idx
Zero-based index number of where the value is inserted.
MUST be a number that is zero or greater and less than or equal to the length of the collection.

Example payload

{
  "value": "foo",
  "idx": 2
}

Collection remove event

Subject
event.<resourceName>.remove

Remove events are sent when a value is removed from a collection.
Any previous value at a higher index will implicitly be shifted one step to a lower index.
MUST NOT be sent on models.
Values cannot be removed from arrays inside data values, but the data value must be changed in its entirety.
The event payload has the following parameter:

idx
Zero-based index number of where the value was prior to removal.
MUST be a number that is zero or greater and less than the length of the collection prior to removal.

Example payload

{ "idx": 2 }

Reaccess event

Subject
event.<resourceName>.reaccess

Reaccess events are sent when a resource's access permissions has changed. It will invalidate any previous access response received for the resource.
The event has no payload.

Create event

Subject
event.<resourceName>.create

Create events are sent when the resource is created.
The event has no payload.

Delete event

Subject
event.<resourceName>.delete

Delete events are sent when the resource is considered deleted. It will invalidate any previous get response received for the resource.
The event has no payload.

Custom event

Subject
event.<resourceName>.<eventName>

Custom events are used to send information that does not affect the state of the resource.
The event name is case-sensitive and MUST be a non-empty alphanumeric string with no embedded whitespace. It MUST NOT be any of the following reserved event names:
add, change, create, delete, patch, reset, reaccess, remove or unsubscribe.

Payload is defined by the service, and will be passed to the client without alteration.

Connection events

Connection events are sent for specific connection ID's (cid), and are listened to by the gateways. These events allow for the services to control the state of the connections.

Connection token event

Subject
conn.<cid>.token

Sets the connection's access token, discarding any previously set token.
A change of token will invalidate any previous access response received using the old token.
The event payload has the following parameter:

token
Access token.
A null token clears any previously set token.

tid
Token ID used to identify the token on system token reset events.
MUST be a string.
May be omitted.

Example payload

{
  "token": {
    "userid": 42,
    "username": "foo",
    "role": "admin",
  },
  "tid": "42"
}

System events

System events are used to send information having a system wide effect.

System reset event

Subject
system.reset

Signals that some resources are no longer to be considered up to date, or that previous access requests may no longer be valid.
A service MUST send a system reset event if it no longer can guarantee that it has sent the defined resource events that describe the changes made to its resources, or if access to the resources might have changed without the service having sent the appropriate reaccess events. This may be due to a service crashing between persisting a change and sending the event describing the change, or by restarting a service that only persisted its resource or access state in memory.
The event payload has the following parameters:

resources
JSON array of resource name patterns.
Any service or gateway subscribing to a matching resource should send a new get request to get an up-to-date version.
May be omitted.

access
JSON array of resource name patterns.
Any gateway with clients subscribing to a matching resource should send new access requests for each client subscription.
May be omitted.

Example payload

{
  "resources": [ "userService.users", "userService.user.*" ],
  "access": [ "userService.>" ]
}

Resource name pattern

A resource name pattern is a string used for matching resource names.
The pattern may use the following wild cards:

The asterisk (*) matches any part at any level of the resource name.
Eg. userService.user.*.roles - Pattern that matches the roles collection of all users.
The greater than symbol (>) matches one or more parts at the end of a resource name, and must be the last part.
Eg. messageService.> - Pattern that matches all resources owned by messageService.

System token reset event

Subject
system.tokenReset

Signals that tokens matching one or more token IDs (tid) are to be considered out of date. A service MUST immediately send an auth request to the provided subject for each connection with a token matching any of the token IDs. The auth request should not contain any params, and the response may be discarded by the service.
The event payload has the following parameters:

tids
An array of token ID (tid) strings.
MUST be an array of strings.

subject
A subject string to which the auth requests should be sent.
May have the subject pattern of an auth request, but it is not required.
MUST be a string.

Example payload

{
  "tids": [ "12", "42" ],
  "subject": "auth.authentication.renewToken"
}

Query resources

A query resource is a resource where its model properties or collection values may vary based on the query. It is used to request partial or filtered resources, such as for searches, sorting, or pagination.

Query event

Subject
event.<resourceName>.query

Query events are sent when a query resource might have been modified. This happens when any of the data that the query resource is based upon is modified.

Prior to sending the event, the service must generate a temporary inbox subject and subscribe to it. The inbox subject is sent as part of the event payload, and any subscriber receiving the event should send a query request on that subject for each query they subscribe to on the given resource.

The event payload has the following parameter:

subject
A subject string to which a (#query-request) may be sent.
MUST be a string.

Example payload

{
  "subject": "_REQUEST_SUBJECT_12345678"
}

Query request

Subject
Subject received from the query event.

Query requests are sent in response to a query event. The service should respond with a list of events to be applied to the query resource. These events must be based on the state of the underlaying data at the time when the query event was sent. This requires the service to keep track of the changes made to a query resource's underlaying data for as long as the temporary request subject is being subscribed to.
The request payload has the following parameters:

query
Normalized query received in the response to the get request for the query resource.
MUST be a string.

Example payload

{
  "query": "limit=25&start=0"
}

Result

events
An array of events for the query resource.
MUST be an array of event query objects
May be omitted if there are no events.
Must be omitted if model or collection is provided.

model
An object containing the named properties and values of the model.
Must be omitted if events or collection is provided. Must be omitted if the query resource is not a model.

collection
An ordered array containing the values of the collection.
Must be omitted if events or model is provided. Must be omitted if the query resource is not a collection.

Example result payload with events

{
  "events": [
    { "event": "remove", "data": { "idx": 24 }},
    { "event": "add", "data": { "value": "foo", "idx": 0 }},
  ]
}

Example result payload with collection

{
  "collection": [ "first", "second", "third" ]
}

Event query object

An event query object has the following members:

event
Event name as described in resource events.
MUST be a string.

data
Payload data as described in resource events.
May be omitted if the event requires no payload.

Files

res-service-protocol.md

Latest commit

History

res-service-protocol.md

File metadata and controls

The RES-Service Protocol Specification

Table of contents

Introduction

Requests

Request subject

Request payload

Response

Error object

Pre-defined errors

Pre-response

Request types

Access request

Result

Error

Get request

Result

Error

Call request

Result

Resource

Error

Auth request

Result

Resource

Error

Pre-defined call methods

Set call request

New call request

Events

Resource events

Model change event

Delete action

Collection add event

Collection remove event

Reaccess event

Create event

Delete event

Custom event

Connection events

Connection token event

System events

System reset event

Resource name pattern

System token reset event

Query resources

Query event

Query request

Result

Event query object