A quick reference of the currently supported device types and subtypes, and the commands that can sent to each (i.e. transmitted by the RFXtrx433). Note that not every device subtype in a given type will support all the available commands. Invalid command/device combinations, address codes and parameters will throw an error.
For the full details see the RFXtrx433 user manual (in a few cases information from the SDK manual is also needed). Some of these devices may only be supported by recent versions of the RFXCOM firmware, and in some cases, hardware.
Devices:
ACTIV_LINK_CHIME
ACTIV_LINK_PIR
Commands:
ActivLink.chime()
Devices:
BLINDS_T0
BLINDS_T1
BLINDS_T2
BLINDS_T3
BLINDS_T4
BLINDS_T5
BLINDS_T6
BLINDS_T7
BLINDS_T8
BLINDS_T9
BLINDS_T10
BLINDS_T11
BLINDS_T12
BLINDS_T13
BLINDS_T14
BLINDS_T15
BLINDS_T16
BLINDS_T17
BLINDS_T18
BLINDS_T19
BLINDS_T20
Commands:
Blinds1.open()
Blinds1.close()
Blinds1.stop()
Blinds1.confirm()
Blinds1.intermediatePosition()
Blinds1.setLimit()
Blinds1.setLowerLimit()
Blinds1.reverse()
Blinds1.down()
Blinds1.up()
Blinds1.venetianIncreaseAngle()
Blinds1.venetianDecreaseAngle()
Blinds1.toggleLightOnOff()
Devices:
BREL_DOOYA
Commands:
Blinds2.open()
Blinds2.up()
Blinds2.close()
Blinds2.down()
Blinds2.stop()
Blinds2.confirm()
Blinds2.setAngle()
Blinds2.setPercent()
Blinds2.setPercentAndAngle()
Devices:
X10_NINJA
Commands:
Camera1.panLeft()
Camera1.panRight()
Camera1.tiltUp()
Camera1.tiltDown()
Camera1.goToPosition()
Camera1.sweep()
Camera1.programSweep()
Devices: BYRON_SX BYRON_MP001 SELECT_PLUS BYRON_BY ENVIVO ALFAWISE QH_A19 BYRON_DBY
Commands:
Chime1.chime()
Devices:
HARRISON
Commands:
Curtain1.open()
Curtain1.close()
Curtain1.stop()
Curtain1.program()
Devices:
EDISIO_CONTROLLER
Commands:
Edisio.sitchOff()
Edisio.switchOn()
Edisio.toggleOnOff()
Edisio.setLevel()
Edisio.increaseLevel()
Edisio.decreaseLevel()
Edisio.toggleDimming()
Edisio.stopDimming()
Edisio.setColour()
Edisio.program()
Edisio.open()
Edisio.stop()
Edisio.close()
Edisio.sendContactNormal()
Edisio.sendContactAlert()
Devices:
SIEMENS_SF01
ITHO_CVE_RFT
LUCCI_AIR
SEAV_TXS4
WESTINGHOUSE_7226640
LUCCI_AIR_DC
CASAFAN
FT1211R
FALMEC
LUCCI_AIR_DCII
ITHO_CVE_ECO_RFT
NOVY
Commands:
Fan.buttonPress()
Fan.setSpeed()
Fan.decreaseSpeed()
Fan.increaseSpeed()
Fan.switchOff()
Fan.startTimer()
Fan.toggleOnOff()
Fan.toggleFanDirection()
Fan.setFanDirection()
Fan.toggleLightOnOff()
Fan.switchLightOn()
Fan.switchLightOff()
Fan.program()
Fan.confirm()
Fan.eraseAll()
Fan.standby()
Fan.resetFilter()
The Fan button names (subtype SEAV_TXS4 only) are T1, T2, T3, and T4
Devices:
GIRA
INSTA
Commands:
Funkbus.buttonPress()
Funkbus.switchOn()
Funkbus.switchOff()
Funkbus.increaseLevel()
Funkbus.decreaseLevel()
Funkbus.setScene()
The Funkbus button names are Up, Down, All On, All Off, Scene, Master Up, and Master Down
Devices:
TEL_010
Commands:
HomeConfort.switchOn()
HomeConfort.switchOff()
Devices:
HUNTER_FAN
Commands:
HunterFan.switchOff()
HunterFan.toggleLightOnOff()
HunterFan.setSpeed()
HunterFan.program()
Devices:
X10
ARC
ELRO
WAVEMAN
CHACON
IMPULS
RISING_SUN
PHILIPS_SBC
ENERGENIE_ENER010
ENERGENIE_5_GANG
COCO
HQ
OASE_FM
Commands:
Lighting1.switchOn()
Lighting1.switchOff()
Lighting1.increaseLevel()
Lighting1.decreaseLevel()
Lighting1.chime()
Lighting1.program()
Devices:
AC
HOMEEASY_EU
ANSLUT
KAMBROOK
Commands:
Lighting2.switchOn()
Lighting2.switchOff()
Lighting2.setLevel()
Devices:
KOPPLA
Commands:
Lighting3.switchOn()
Lighting3.switchOff()
Lighting3.setLevel()
Lighting3.increaseLevel()
Lighting3.decreaseLevel()
Lighting3.program()
Devices:
PT2262
Commands:
Lighting4.sendData()
Devices:
LIGHTWAVERF
EMW100
BBSB
MDREMOTE
CONRAD
LIVOLO
TRC02
AOKE
TRC02_2
EURODOMEST
LIVOLO_APPLIANCE
RGB432W
MDREMOTE_107
LEGRAND
AVANTEK
IT
MDREMOTE_108
KANGTAI
Commands:
Lighting5.switchOn()
Lighting5.switchOff()
Lighting5.setLevel()
Lighting5.setMood()
Lighting5.increaseLevel()
Lighting5.decreaseLevel()
Lighting5.toggleOnOff()
Lighting5.program()
Lighting5.relayClose()
Lighting5.relayStop()
Lighting5.relayOpen()
Lighting5.lock()
Lighting5.unlock()
Lighting5.increaseColour()
Lighting5.decreaseColour()
Lighting5.setColour()
Lighting5.setScene()
Devices:
BLYSS
CUVEO
Commands:
Lighting6.switchOn()
Lighting6.switchOff()
Devices:
SMARTWARES
Commands:
Radiator1.setNightMode()
Radiator1.setDayMode()
Radiator1.setTemperature()
Devices:
RAW
Commands:
RawTx.sendMessage(deviceId, params)
[DeviceId is not used and may be omitted] Send the message with the specified parameters, given by the fields of the params object:
{
repeats: 1-10 Optional (defaults to 5))
pulseTimes: <string or array of numbers>
}
Note: All pulseTimes values must be integers in the range 1-65535; there must be an even number up to a mximum of 496
Devices:
ATI_REMOTE_WONDER
ATI_REMOTE_WONDER_PLUS
MEDION
X10_PC_REMOTE
ATI_REMOTE_WONDER_2
Commands:
Remote.buttonPress()
Refer to the RFXCOM user guide section 7.1 for the supported Remote button names for each subtype. Either the button number or the button name may be used. If using names, you should use the same letter case as appears in the user guide, as case-insensitive matching, although it is supported, gives ambiguous results for some button names.
Devices:
RFY
RFYEXT
ASA
Commands:
Rfy.up()
Rfy.down()
Rfy.stop()
Rfy.venetianOpen()
Rfy.venetianClose()
Rfy.venetianIncreaseAngle()
Rfy.venetianDecreaseAngle()
Rfy.enableSunSensor()
Rfy.disableSunSensor()
Rfy.erase()
Rfy.eraseAll()
Rfy.listRemotes()
Rfy.program()
Rfy.doCommand()
Devices:
X10_SECURITY
KD101
POWERCODE_DOOR
POWERCODE_PIR
CODE_SECURE
POWERCODE_AUX
MEIANTECH
SA30
RM174RF
Commands:
Security1.sendStatus()
Security1.sendPanic()
Security1.cancelPanic()
Security1.armSystemAway()
Security1.armSystemAwayWithDelay()
Security1.armSystemHome()
Security1.armSystemHomeWithDelay()
Security1.disarmSystem()
Security1.switchLightOn()
Security1.switchLightOff()
Security1.switchOnLight() -- DEPRECATED!
Security1.switchOffLight() -- DEPRECATED!
Devices:
DIGIMAX_TLX7506
DIGIMAX_SHORT
Commands:
Thermostat1.sendMessage(deviceId, params)
Send the message with the specified parameters, given by the fields of the params object:
{
temperature:[0.0 .. 50.0] Mandatory (degrees C)
setpoint:[5.0 .. 45.0] Mandatory (optional for subtype DIGIMAX_SHORT)
status:<0, 1, 2, 3>, or
<"N/A", "Demand", "No Demand", "Initializing"> (case-insensitive)
Optional
mode:<0, 1>, or
<"Heating", "Cooling"> (case-insensitive)
Optional
}
Devices:
HE105
RTS10_RFS10_TLX1206
Commands:
Thermostat2.switchOn()
Thermostat2.switchOff()
Thermostat2.program()
Devices:
G6R_H4T1
G6R_H4TB
G6R_H4TD
G6R_H4S
G6R_H3T1
Commands:
Thermostat3.switchOn()
Thermostat3.switchOff()
Thermostat3.switchOn2()
Thermostat3.switchOff2()
Thermostat3.up()
Thermostat3.down()
Thermostat3.runUp()
Thermostat3.runDown()
Thermostat3.stop()
Devices:
MCZ_PELLET_STOVE_1_FAN
MCZ_PELLET_STOVE_2_FAN
MCZ_PELLET_STOVE_3_FAN
Commands:
Thermostat4.sendMessage(deviceId, params)
Send the message with the specified parameters, given by the fields of the params object:
{
beep:<truthy, falsy> Optional, defaults to true
fanSpeed:[0-6, 0-6, 0-6] Optional, one speed for each fan, defaults to 6 (auto), excess ignored, "auto" --> 6
flamePower:<1, 2, 3, 4, 5> Mandatory
mode:<0, 1, 2, 3>, or
<"Off", "Manual", "Auto", "Eco"> (case-insensitive, 3 characters needed)
Mandatory
}
Devices:
GAZCO_RF290A
Commands:
Thermostat5.sendMessage(deviceId, params)
Send the message with the specified parameters, given by the fields of the params object:
{
mode:<0, 1, 2, 3, 4>, or
<"Off", "LED", "Standby", "Low", "High"> (case-insensitive, 3 characters needed)
Mandatory
flameBrightness: 0-5 (0 is off)
flameColour: 1-3
fuelBrightness: 0-5 (0 is off)
fuelColour: 1-14 (14 is cycle)
}