Add support for VID 0x25a7 boards [RK68 (2.4G, PID: FA07)]

[Simple-Young]

firmware link：https://share.weiyun.com/2ivxjMXZ

[Simple-Young]

or this link https://tinyurl.com/kejabdrp

[rnayabed]

Please look at #13 (comment)

If possible, perform the tests:

Please attach screenshots of the Software. Note that I should be able to see the full list of lighting modes as well. That is very important.

It looks like the protocol is also different, so please do the following

You need to record some tests and send the output (.pcap) of the tests to me. You need to use Windows for this.

Setting up:

1. install USBPCAP from https://desowin.org/usbpcap/

How to record:

1. launch RK Keyboard Software
2. launch USBPcapCMD.exe from C:\Program Files\USBPcap
3. select the hub that you have connected your RK keyboard to. Generally it shows up as "HID Keyboard Device"
4. enter file name as test_.pcap. After you enter it will start recording.
5. proceed with the test steps.
6. when test is done, do Ctrl+C to exit the program. The recording will stop.
7. send over the .pcap files over

Note: Follow all the steps AT ONCE.
For example, if you are asked to set x to 2 you should set x to 2 from the previous value AT ONCE, and not stopping midway at 3 or something.

Test 1

Before Recording, do the following:

1. Open RK Software
2. Select the first lighting mode (Mention the name as well from the screenshot)
3. Set brightness to 5 (max)
4. Set animation to 5 (max)
5. Set sleep as No Sleep (max)

== Start Recording ==

Tests:

1. Select explode light mode
2. Select sleep at middle (3)
3. Select Animation Speed as 2
4. Select Sleep Time as 10 minutes

Test 2

BEFORE Testing, do the following:

1. Select "Customize" Light effect mode.
2. Turn off EVERY KEY
3. Set sleep as 30 minutes

== Start Recording ==

1. Select the custom lighting mode (Mention the name as well from the screenshot)
2. Click on Q Key.
3. Click on Esc Key.
4. Click on Right Arrow Key.
5. Set sleep to 20 minutes
6. Select "Glittering" Light effect mode
7. Select "Ripples" Light effect mode

After your tests are done, send me the 2 .pcap files. Also, send me the exact model name, Vendor ID and product ID of your keyboard.