-
Notifications
You must be signed in to change notification settings - Fork 90
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Yi Dome Camera U 2K has stopped working #854
Comments
The log is ok, the cam started properly. |
Thank you for your reply! PS. Additional question: |
How did you set wifi credentials? Did you use configure_wifi procedure?
There is no final answer to this question. |
That's exactly what I did. I started with point 4 in the instructions |
I think this is related to #814, I've had similar problems with this camera. For some reason it has now been working for the past few days. What I did:
|
Well, I did some tests today. The results are strange to say the least ... I tested it on the version "yi-hack-Allwinner-v2 0.3.2" The camera after restart announces that "welcome to ..." Then it says that it is waiting for a connection. This suggests that the hack has not loaded (in my opinion) and the original firmware is running. And now a strange thing: I start the YiHome app and go through several steps until the QR code is generated. The camera reads the code, announces that it has connected and ... yi-hack starts up. It completely skips the "Factory.done\configure_wifi.cfg" (or "Factory\configure_wifi.cfg") entry - it doesn't retrieve the wifi network information from it. I am completely dumbfounded. The first time , when it worked the camera "said nothing". - it booted up without any announcement etc. And now, every reboot I have to show it the QR code with the network info. I must be doing something wrong.... |
This is not true.
This configure_wifi.cfg is used only the 1st time, when you install the hack. The weird thing is that the cam doesn't save the credentials when the wizard completes. So, finally you can try these steps:
If you want to debug the problem, make a dump of the partition: |
Well. I starred some characters for principle :-) :
From "configure_wifi.cfg" =Temporary network= I haven't tried anything else yet. |
Is this after app pairing or after configure_wifi.sh? |
I haven't done anything since yesterday. PS. It is connected under the SSID of TeStY, I did not change it to the target because it ended badly ... |
Same for me, after a while it just started working 🤷🏻 No more "waiting for connection" etc. |
Ok. I had some time and played around. In summary - I have NO idea what is wrong with it .... Translated with DeepL.com (free version) |
ssid and password are ok, the char "00" is the string terminator. So your current data are:
I will resume my h51ga and test it. |
I tested my y51ga 9.0.21.08_202007270941 and I was able to complete the procedure. 1 - I formatted a new sd card and copied the last version of the hack (h51ga_0.3.2.tgz). I tried to reboot the cam 3-4 times and it works correctly. What's your Yi fw version? EDIT EDIT 2 |
I uploaded the hack two days ago and it worked without any problem.
Today I tried to connect it to the HomeAssistant server as rtsp (with the WebRTC plugin) but unfortunately it didn't work.
I enabled the onvif server in the camera and after restarting the camera no longer wants to upload the yi-hack.
It behaves as if there is no sd card. During the reboot you hear the announcement : "welcome to ..." and then "waiting for connection" and nothing further happens.
I tried this solution : #821 but it doesn't do anything.
Below is the log from the card (I set DEBUG_LOG=yes) so you can see that there is an attempt to boot, but why unsuccessful?
The text was updated successfully, but these errors were encountered: