No datapoints for Kettle Proficook 1167

[bajzello]

Using configuration via config flow and getting:
Connection to device succeeded but no datapoints found, please try again. Create a new issue and include debug logs if problem persists.

Log below.

Please advise,
Cheers!

---

Logs:

2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Started heartbeat loop
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Sending command heartbeat (device type: type_0a)
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Send payload: b'{}'
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Waiting for sequence number -100
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Sending command status (device type: type_0a)
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Send payload: b'{"gwId":"<<<id>>>","devId":"<<<id>>>"}'
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Waiting for sequence number 1
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Connection lost: [Errno 104] Connection reset by peer
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Closing connection
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Wait was aborted for seqno 1
2020-11-29 00:48:20 DEBUG (MainThread) [custom_components.localtuya.pytuya] [271...f4a] Closing connection

[wlatic]

Have you tried opening the Tuya app and using the device and running this again (after making sure the tuya app is completely closed)?

I've just gone through this with a dimmer that wouldn't report ID 1 and this method worked for me.

[KTibow]

Or just try again

[SvetZitrka]

I have the same problem and no commissioning advice has helped.

[jobrum]

Having the same problem, weird thing is that the other 4 lights added just fine

[ramyaladdin]

I have same problem with door sensor.
does any one found solution for this ?
Thanks

[Rekazm]

Has anybody found a solution for the no datapoints found?