title |
---|
Macros |
The word macro is used generally in computer science to mean a syntactic extension to a programming language. (Note: The name comes from the word "macro-instruction," which was a useful feature of many second-generation assembly languages. A macro-instruction looked like a single instruction, but expanded into a sequence of actual instructions. The basic idea has since been used many times, notably in the C preprocessor. The name "macro" is perhaps not ideal, since it connotes nothing relevant to what it names, but we're stuck with it.) Although many languages have a macro facility, none of them are as powerful as Lisp's. The basic mechanism of Lisp macros is simple, but has subtle complexities, so learning your way around it takes a bit of practice.
A macro is an ordinary piece of Lisp code that operates on another piece of putative Lisp code, translating it into (a version closer to) executable Lisp. That may sound a bit complicated, so let's give a simple example. Suppose you want a version of setq
that sets two variables to the same value. So if you write
(setq2 x y (+ z 3))
when z
=8 both x
and y
are set to 11. (I can't think of any use for this, but it's just an example.)
It should be obvious that we can't define setq2
as a function. If x
=50 and y
=-5, this function would receive the values 50, -5, and 11; it would have no knowledge of what variables were supposed to be set. What we really want to say is, When you (the Lisp system) see (setq2 v1 v2 e)
, treat it as equivalent to (progn (setq v1 e) (setq v2 e))
. Actually, this isn't quite right, but it will do for now. A macro allows us to do precisely this, by specifying a program for transforming the input pattern (setq2 v1 v2 e)
into the output pattern (progn ...)
.
Here's how we could define the setq2
macro:
(defmacro setq2 (v1 v2 e)
(list 'progn (list 'setq v1 e) (list 'setq v2 e)))
This is very close to the following function definition:
(defun setq2F (v1 v2 e)
(list 'progn (list 'setq v1 e) (list 'setq v2 e)))
If we evaluated (setq2F 'x 'y '(+ z 3))
, we would get (progn (setq x (+ z 3)) (setq y (+ z 3)))
. This is a perfectly ordinary Lisp computation, whose sole point of interest is that its output is a piece of executable Lisp code. What defmacro
does is create this function implicitly and arrange that whenever an expression of the form (setq2 x y (+ z 3))
is seen, setq2F
is called with the pieces of the form as arguments, namely x
, y
, and (+ z 3)
. The resulting piece of code then replaces the call to setq2
, and execution resumes as if the new piece of code had occurred in the first place. The macro form is said to expand into the new piece of code.
This is all there is to it, except, of course, for the myriad subtle consequences. The main consequence is that run time for the setq2
macro is compile time for its context. That is, suppose the Lisp system is compiling a function, and midway through it finds the expression (setq2 x y (+ z 3))
. The job of the compiler is, of course, to translate source code into something executable, such as machine language or perhaps byte code. Hence it doesn't execute the source code, but operates on it in various mysterious ways. However, once the compiler sees the setq2
expression, it must suddenly switch to executing the body of the setq2
macro. As I said, this is an ordinary piece of Lisp code, which can in principle do anything any other piece of Lisp code can do. That means that when the compiler is running, the entire Lisp (run-time) system must be present.
Novices often make the following sort of mistake. Suppose that the setq2
macro needs to do some complex transformation on its e
argument before plugging it into the result. Suppose this transformation can be written as a Lisp procedure comtran
. The novice will often write:
(defmacro setq2 (v1 v2 e)
(let ((e1 (comtran e)))
(list 'progn (list 'setq v1 e1) (list 'setq v2 e1))))
(defmacro comtran (exp) ...) ;; _Wrong!_
The mistake is to suppose that once a macro is called, the Lisp system enters a "macro world," so naturally everything in that world must be defined using defmacro
. This is the wrong picture. The right picture is that defmacro
enables a step into the ordinary Lisp world, but in which the principal object of manipulation is Lisp code. Once that step is taken, one uses ordinary Lisp function definitions:
(defmacro setq2 (v1 v2 e)
(let ((e1 (comtran e)))
(list 'progn (list 'setq v1 e1) (list 'setq v2 e1))))
(defun comtran (exp) ...) ;; _Right!_
One possible explanation for this mistake may be that in other languages, such as C, invoking a preprocessor macro does get you into a different world; you can't run an arbitrary C program. It might be worth pausing to think about what it might mean to be able to.
Another subtle consequence is that we must spell out how the arguments to the macro get distributed to the hypothetical behind-the-scenes function (called setq2F
in my example). In most cases, it is easy to do so: In defining a macro, we use all the usual lambda
-list syntax, such as &optional
, &rest
, &key
, but what gets bound to the formal parameters are pieces of the macro form, not their values (which are mostly unknown, this being compile time for the macro form). So if we defined a macro thus:
(defmacro foo (x &optional y &key (cxt 'null)) ...)
then
If we call it thus ... | The parameters' values are ... |
---|---|
(foo a) |
x=a, y=nil, cxt=null |
(foo (+ a 1) (- y 1)) |
x=(+ a 1), y=(- y 1), cxt=null |
(foo a b :cxt (zap zip)) |
x=a, y=b, cxt=(zap zip) |
Note that the values of the variables are the actual expressions (+ a 1)
and (zap zip)
. There is no requirement that these expressions' values be known, or even that they have values. The macro can do anything it likes with them. For instance, here's an even more useless variant of setq
: (setq-reversible e1 e2 d)
behaves like (setq e1 e2)
if d=:normal
, and behaves like (setq e2 e1)
if d=:backward
. It could be defined thus:
(defmacro setq-reversible (e1 e2 d)
(case d
(:normal (list 'setq e1 e2))
(:backward (list 'setq e2 e1))
(t (error ...))))
Before taking another step, we need to introduce a piece of Lisp notation that is indispensable to defining macros, even though technically it is quite independent of macros. This is the backquote facility. As we saw above, the main job of a macro, when all is said and done, is to define a piece of Lisp code, and that means evaluating expressions such as (list 'prog (list 'setq ...) ...)
. As these expressions grow in complexity, it becomes hard to read them and write them. What we find ourselves wanting is a notation that provides the skeleton of an expression, with some of the pieces filled in with new expressions. That's what backquote provides. Instead of the the list
expression given above, one writes
`(progn (setq ,v1 ,e) (setg ,v2 ,e))
The backquote (`) character signals that in the expression that follows, every subexpression not preceded by a comma is to be quoted, and every subexpression preceded by a comma is to be evaluated.
That's mostly all there is to backquote. There are just two extra items to point out. First, if you write ",@e
" instead of ",e
" then the value of e is spliced into the result. So if v=(oh boy)
, then (zap ,@v ,v)
evaluates to (zap oh boy (oh boy))
. The second occurrence of v
is replaced by its value. The first is replaced by the elements of its value. If v
had had value ()
, it would have disappeared entirely: the value of (zap ,@v ,v)
would have been (zap ())
, which is the same as (zap nil)
.
Second, one might wonder what happens if a backquote expression occurs inside another backquote. The answer is that the backquote becomes essentially unreadable and unwriteable; using nested backquote is usually a tedious debugging exercise. The reason, in my not-so-humble opinion, is that backquote is defined wrong. A comma pairs up with the innermost backquote when the default should be that it pairs up with the outermost. But this is not the place for a rant or tutorial; consult your favorite Lisp reference for the exact behavior of nested backquote plus some examples.
One problem with backquote is that once you learn it you tend to use for every list-building occasion. For instance, you might write
(mapcan (lambda (x)
(cond ((symbolp x) `((,x)))
((> x 10) `(,x ,x))
(t '())))
some-list)
which yields ((a) 15 15)
when some-list
= (a 6 15)
. The problem is that mapcan
destructively alters the results returned by the lambda
-expression. Can we be sure that the lists returned by that expression are "fresh," that is, they are different (in the eq
sense) from the structures returned on other calls of that lambda
expression? In the present case, close analysis will show that they must be fresh, but in general backquote is not obligated to return a fresh list every time (whether it does or not is implementation-dependent). If the example above got changed to
(mapcan (lambda (x)
(cond ((symbolp x) `((,x)))
((> x 10) `(,x ,x))
((>= x 0) `(low))
(t '())))
some-list)
then backquote may well treat (low)</code> as if it were
'(low); the list will be allocated at load time, and every time the
lambdais evaluated, that same chunk of storage will be returned. So if we evaluate the expression with
some-list=
(a 6 15), we will get
((a) low 15 15), but as a side effect the constant
(low)will get clobbered to become
(low 15 15). If we then evaluate the expression with, say,
some-list=
(8 oops), the result will be
(low 15 15 (oops)), and now the "constant" that started off as
'(low)will be
(low 15 15 (oops)). (Note: The bug exemplified here takes other forms, and has often bit newbies - as well as experienced programmers - in the ass. The general form is that a constant list is produced as the value of something that is later destructively altered. The first line of defense against this bug is never to destructively alter any list. For newbies, this is also the last line of defense. For those of us who imagine we're more sophisticated, the next line of defense is to think very carefully any time you use [
nconc](http://www.lispworks.com/documentation/HyperSpec/Body/f_nconc.htm) or
mapcan`.)
To fix the bug, you can write (map 'list ...)
instead of mapcan
. However, if you are determined to use mapcan
, write the expression this way:
(mapcan (lambda (x)
(cond ((symbolp x) (list `(,x)))
((> x 10) (list x x))
((>= x 0) (list 'low))
(t '())))
some-list)
My personal preference is to use backquote only to build S-expressions, that is, hierarchical expressions that consist of symbols, numbers, and strings, and that are not conceptualized as changing in length. For instance, I would never write
(setq sk `(,x ,@sk))
If sk
is being used as a stack, that is, it's going to be pop
ped in the normal course of things, I would write tt (push x sk). If not, I would write (setq sk (cons x sk))
.
I said in the first section that my definition of setq2
wasn't quite right, and now it's time to fix it.
Suppose we write (setq2 x y (+ x 3))
, when x
=8. Then according to the definition given above, this form will expand into (progn (setq x (+ x 3)) (setq y (+ x 3)))
, so that x
will have value 11 and y
will have value 14. Chances are that isn't what the macro is expected to do (although you never know). Another problematic case is (setq2 x y (pop l))
, which causes l
to be popped twice; again, probably not right.
The solution is to evaluate e
just once, save it in a temporary variable, and then set v1
and v2
to it. To make temporary variables, we use the gensym
function, which returns a fresh variable guaranteed to appear nowhere else. Here is what the macro should look like:
(defmacro setq2 (v1 v2 e)
(let ((tempvar (gensym)))
`(let ((,tempvar ,e))
(progn (setq ,v1 ,tempvar)
(setq ,v2 ,tempvar)))))
Now (setq2 x y (+ x 3))
expands to
(let ((#:g2003 (+ x 3)))
(progn (setq x #:g2003) (setq y #:g2003)))
Here gensym
has returned the symbol #:g2003
, which prints in this funny way because it won't be recognized by the reader. (Nor is there any need for the reader to recognize it, since it exists only long enough for the code that contains it to be compiled.)
Exercise: Verify that this new version works correctly for the case (setq2 x y (pop l1))
.
Exercise: Try writing the new version of the macro without using backquote. If you can't do it, you have done the exercise correctly, and learned what backquote is for!
The moral of this section is to think carefully about which expressions in a macro get evaluated and when. Be on the lookout for situations where the same expression gets plugged into the output twice (as e
was in my original macro design). For complex macros, watch out for cases where the order that expressions are evaluated differs from the order in which they are written. This is sure to trip up some user of the macro - even if you are the only user.
Macros are for making syntactic extensions to Lisp. One often hears it said that macros are a bad idea, that users can't be trusted with them, and so forth. Balderdash. It is just as reasonable to extend a language syntactically as to extend it by defining your own procedures. It may be true that the casual reader of your code can't understand the code without seeing the macro definitions, but then the casual reader can't understand it without seeing function definitions either. Having defmethod
s strewn around several files contributes far more to unclarity than macros ever have, but that's a different diatribe.
Before surveying what sorts of syntactic extensions I have found useful, let me point out what sorts of syntactic extensions are generally not useful, or best accomplished using means other than macros. Some novices think macros are useful for open-coding functions. So, instead of defining
(defun sqone (x)
(let ((y (+ x 1))) (* y y)))
they might define
(defmacro sqone (x)
`(let ((y (+ ,x 1))) (* y y)))
So that (sqone (* z 13))
might expand into
(let ((y (+ (* z 13) 1)))
(* y y))
This is correct, but a waste of effort. For one thing, the amount of time saved is almost certainly negligible. If it's really important that sqone
be expanded inline, one can put (declaim (inline sqone))
before sqone
is defined (although the compiler is not obligated to honor this declaration). For another, once sqone
is defined as a macro, it becomes impossible to write (mapcar #'sqone ll)
, or to do anything else with it except call it.
But macros have a thousand and one legitimate uses. Why write (lambda (x) ...)
when you can write (\\ (x) ...)
? Just define \\
as a macro: (defmacro \ (&rest l) `(lambda ,@l))
.
Many people find mapcar
and mapcan
a bit too obscure, especially when used with large lambda
expressions. Rather than write something like
(mapcar (lambda (x)
(let ((y (hairy-fun1 x)) (z (hairy-fun2 x)))
(dolist (y1 y)
(dolist (z1 z)
_... and further meaningless_
_space-filling nonsense..._
))))
l)
we might prefer to write
(for (x :in l)
(let ((y (hairy-fun1 x)) (z (hairy-fun2 x)))
(dolist (y1 y)
(dolist (z1 z)
_... and further meaningless_
_space-filling nonsense..._
))))
This macro might be defined thus:
(defmacro for (listspec exp)
(cond ((and (= (length listspec) 3)
(symbolp (car listspec))
(eq (cadr listspec) ':in))
`(mapcar (lambda (,(car listspec))
,exp)
,(caddr listspec)))
(t (error "Ill-formed: %s" `(for ,listspec ,exp)))))
(This is a simplified version of a macro by Chris Riesbeck.)
It's worth stopping for a second to discuss the role the keyword :in
plays in this macro. It serves as a sort of "local syntax marker," in that it has no meaning as far as Lisp is concerned, but does serve as a syntactic guidepost for the macro itself. I will refer to these markers as guide symbols. (Here its job may seem trivial, but if we generalized the for
macro to allow multiple list arguments and an implicit progn
in the body the :in
s would be crucial in telling us where the arguments stopped and the body began.)
It is not strictly necessary for the guide symbols of a macro to be in the keyword package, but it is a good idea, for two reasons. First, they highlight to the reader that something idiosyncratic is going on. A form like (for ((x in (foobar a b 'oof))) (something-hairy x (list x)))
looks a bit wrong already, because of the double parentheses before the x
. But using ":in
" makes it more obvious.
Second, notice that I wrote (eq (cadr listspec) ':in)
in the macro definition to check for the presence of the guide symbol. If I had used in
instead, I would have had to think about which package my in
lives in and which package the macro user's in
lives in. One way to avoid trouble would be to write
(and (symbolp (cadr listspec))
(eq (intern (symbol-name (cadr listspec))
:keyword)
':in))
Another would be to write
(and (symbolp (cadr listspec))
(string= (symbol-name (cadr listspec)) (symbol-name 'in)))
which neither of which is particularly clear or aesthetic. The keyword package is there to provide a home for symbols whose home is not per se relevant to anything; you might as well use it. (Note: In ANSI Lisp, I could have written "IN"
instead of (symbol-name 'in)
, but there are Lisp implementations that do not convert symbols' names to uppercase. Since I think the whole uppercase conversion idea is an embarrassing relic, I try to write code that is portable to those implementations.)
Let's look at another example, both to illustrate a nice macro, and to provide an auxiliary function for some of the discussion below. One often wants to create new symbols in Lisp, and gensym
is not always adequate for building them. Here is a description of an alternative facility called build-symbol
:
(build-symbol [(:package p)] -pieces-)
builds a symbol by concatenating the given pieces and interns it as specified by p. For each element of pieces, if it is a ...
- ... string: The string is added to the new symbol's name.
- ... symbol: The name of the symbol is added to the new symbol's name.
- ... expression of the form
(:< e)
: e should evaluate to a string, symbol, or number; the characters of the value of e (as printed by princ
) are concatenated into the new symbol's name.
- ... expression of the form
(:++ p)
: p should be a place expression (i.e., appropriate as the first argument to setf
), whose value is an integer; the value is incremented by 1, and the new value is concatenated intot he new symbol's name.
If the :package
specification is omitted, it defaults to the value of *package*
. If p is nil
, the symbol is interned nowhere. Otherwise, it should evaluate to a package designator (usually, a keyword whose name is the same of a package).
For example, (build-symbol (:< x) "-" (:++ *x-num*))
, when x
= foo
and *x-num*
= 8, sets *x-num*
to 9 and evaluates to FOO-9
. If evaluated again, the result will be FOO-10
, and so forth.
Obviously, build-symbol
can't be implemented as a function; it has to be a macro. Here is an implementation:
(defmacro build-symbol (&rest l)
(let ((p (find-if (lambda (x) (and (consp x) (eq (car x) ':package)))
l)))
(cond (p
(setq l (remove p l))))
(let ((pkg (cond ((eq (cadr p) 'nil)
nil)
(t `(find-package ',(cadr p))))))
(cond (p
(cond (pkg
`(values (intern ,(symstuff l) ,pkg)))
(t
`(make-symbol ,(symstuff l)))))
(t
`(values (intern ,(symstuff l))))))))
(defun symstuff (l)
`(concatenate 'string
,@(for (x :in l)
(cond ((stringp x)
`',x)
((atom x)
`',(format nil "~a" x))
((eq (car x) ':<)
`(format nil "~a" ,(cadr x)))
((eq (car x) ':++)
`(format nil "~a" (incf ,(cadr x))))
(t
`(format nil "~a" ,x))))))
(Another approach would be have symstuff
return a single call of the form (format nil format-string -forms-)
, where the forms are derived from the pieces, and the format-string consists of interleaved ~a's and strings.)
Sometimes a macro is needed only temporarily, as a sort of syntactic scaffolding. Suppose you need to define 12 functions, but they fall into 3 stereotyped groups of 4:
(defun make-a-zip (y z)
(vector 2 'zip y z))
(defun test-whether-zip (x)
(and (vectorp x) (eq (aref x 1) 'zip)))
(defun zip-copy (x) ...)
(defun zip-deactivate (x) ...)
(defun make-a-zap (u v w)
(vector 3 'zap u v w))
(defun test-whether-zap (x) ...)
(defun zap-copy (x) ...)
(defun zap-deactivate (x) ...)
(defun make-a-zep ()
(vector 0 'zep))
(defun test-whether-zep (x) ...)
(defun zep-copy (x) ...)
(defun zep-deactivate (x) ...)
Where the omitted pieces are the same in all similarly named functions. (That is, the "..." in zep-deactivate
is the same code as the "..." in zip-deactivate
, and so forth.) Here, for the sake of concreteness, if not plausibility, zip
, zap
, and zep
are behaving like odd little data structures. The functions could be rather large, and it would get tedious keeping them all in synch as they are debugged. An alternative would be to use a macro:
(defmacro odd-define (name buildargs)
`(progn (defun ,(build-symbol make-a- (:< name))
,buildargs
(vector ,(length buildargs) ',name ,@buildargs))
(defun ,(build-symbol test-whether- (:< name)) (x)
(and (vectorp x) (eq (aref x 1) ',name))
(defun ,(build-symbol (:< name) -copy) (x)
...)
(defun ,(build-symbol (:< name) -deactivate) (x)
...))))
(odd-define zip (y z))
(odd-define zap (u v w))
(odd-define zep ())
If all the uses of this macro are collected in this one place, it might be clearer to make it a local macro using macrolet
:
(macrolet ((odd-define (name buildargs)
`(progn (defun ,(build-symbol make-a- (:< name))
,buildargs
(vector ,(length buildargs)
',name
,@buildargs))
(defun ,(build-symbol test-whether- (:< name))
(x)
(and (vectorp x) (eq (aref x 1) ',name))
(defun ,(build-symbol (:< name) -copy) (x)
...)
(defun ,(build-symbol (:< name) -deactivate) (x)
...)))))
(odd-define zip (y z))
(odd-define zap (u v w))
(odd-define zep ()))
Finally, macros are essential for defining "command languages." A command is a function with a short name for use by users in interacting with Lisp's read-eval-print loop. A short name is useful and possible because we want it to be easy to type and we don't care much whether the name clashes some other command; if two command names clash, we can change one of them.
As an example, let's define a little command language for debugging macros. (You may actually find this useful.) There are just two commands, ex
and fi
. They keep track of a "current form," the thing to be macro-expanded or the result of such an expansion:
(ex [form])
: Apply macro-expand1
to form (if supplied) or the current form, and make the result the current form. Then pretty-print the current form.
(fi s [k])
: Find the k'th subexpression of the current form whose car
is s. (k defaults to 0.) Make that subexpression the current form and pretty-print it.
Suppose you're trying to debug a macro hair-squared
that expands into something complex containing a subform that is itself a macro form beginning with the symbol odd-define
. You suspect there is a bug in the subform. You might issue the following commands:
> (ex (hair-squared ...))
(PROGN (DEFUN ...)
(ODD-DEFINE ZIP (U V W))
...)
> (fi odd-define)
(ODD-DEFINE ZIP (U V W))
> (ex)
(PROGN (DEFUN MAKE-A-ZIP (U V W) ...)
...)
Once again, it is clear that ex
and fi
cannot be functions, although they could easily be made into functions if we were willing to type a quote before their arguments. But using "quote" often seems inappropriate in commands. For one thing, having to type it is a nuisance in a context where we are trying to save keystrokes, especially if the argument in question is always quoted. For another, in many cases it just seems inappropriate. If we had a command that took a symbol as one of its arguments and set it to a value, it would just be strange to write (command 'x ...)
instead of (command x ...)
, because we want to think of the command as a variant of setq
.
Here is how ex
and fi
might be defined:
(defvar *current-form*)
(defmacro ex (&optional (form nil form-supplied))
`(progn
(pprint (setq *current-form*
(macroexpand-1
,(cond (form-supplied
`',form)
(t '*current-form*)))))
(values)))
(defmacro fi (s &optional (k 0))
`(progn
(pprint (setq *current-form*
(find-nth-occurrence ',s *current-form* ,k)))
(values)))
The ex
macro expands to a form containing a call to macroexpand-1
, a built-in function that does one step of macro expansion to a form whose car
is the name of a macro. (If given some other form, it returns the form unchanged.) pprint
is a built-in function that pretty-prints its argument. Because we are using ex
and fi
at a read-eval-print loop, any value returned by their expansions will be printed. Here the expansion is executed for side effect, so we arrange to return no values at all by having the expansion return (values)
.
In some Lisp implementations, read-eval-print loops routinely print results using pprint
. In those implementations we could simplify ex
and fi
by having them print nothing, but just return the value of *current-form*
, which the read-eval-print loop will then print prettily. Use your judgment.
I leave the definition of find-nth-occurrence
as an exercise. You might also want to define a command that just sets and prints the current form: (cf e)
.
One caution: In general, command languages will consist of a mixture of macros and functions, with convenience for their definer (and usually sole user) being the main consideration. If a command seems to "want" to evaluate some of its arguments sometimes, you have to decide whether to define two (or more) versions of it, or just one, a function whose arguments must be quoted to prevent their being evaluated. For the cf
command mentioned in the prevous paragraph, some users might prefer cf
to be a function, some a macro.
The following video, from the serie
"Little bits of Lisp"
by cbaggers, is a two hours long talk
on macros, showing simple to advanced concepts such as compiler
macros:
https://www.youtube.com/watch?v=ygKXeLKhiTI
It also shows how to manipulate macros (and their expansion) in Emacs.