We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
dev board for https://www.st.com/resource/en/datasheet/l9779wd-spi.pdf with stm32f407 discovery for brain as pin compatible with MRE as reasonably possible
any shape 2 or 4 layers no difference kicad 6.0 into https://github.com/rusefi/rusefi-hardware/tree/main/L9779WD-breakout/ folder eval-L9779WD-SPI development could be source for inspiration for reference schematics https://www.st.com/en/evaluation-tools/eval-l9779wd-spi.html#documentation JLCPCB part numbers where possible 0R jumpers on all L9779WD lines and vias on L9779WD side of the 0R resistor for complete unconditional flexibility just in case
Probably start https://github.com/rusefi/hw_microRusEfi keep 48 pin connector, TC442x and analog inputs from https://github.com/rusefi/hw_microRusEfi remove stm32f407 replace with discovery remove TLE8888 replace with l9779wd-spi
407 discovery 2x25 headers from frankenso https://github.com/rusefi/rusefi-hardware/tree/main/classic-designs/frankenso
The text was updated successfully, but these errors were encountered:
https://github.com/rusefi/rusefi-hardware/issues/10
919a104
hasl58
No branches or pull requests
dev board for https://www.st.com/resource/en/datasheet/l9779wd-spi.pdf with stm32f407 discovery for brain as pin compatible with MRE as reasonably possible
any shape
2 or 4 layers no difference
kicad 6.0 into https://github.com/rusefi/rusefi-hardware/tree/main/L9779WD-breakout/ folder
eval-L9779WD-SPI development could be source for inspiration for reference schematics https://www.st.com/en/evaluation-tools/eval-l9779wd-spi.html#documentation
JLCPCB part numbers where possible
0R jumpers on all L9779WD lines and vias on L9779WD side of the 0R resistor for complete unconditional flexibility just in case
Probably start https://github.com/rusefi/hw_microRusEfi
keep 48 pin connector, TC442x and analog inputs from https://github.com/rusefi/hw_microRusEfi remove stm32f407 replace with discovery remove TLE8888 replace with l9779wd-spi
407 discovery 2x25 headers from frankenso https://github.com/rusefi/rusefi-hardware/tree/main/classic-designs/frankenso
The text was updated successfully, but these errors were encountered: