Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

hidapi error: Failed to open a device with path '/dev/hidraw4': Permission denied #550

Open
simgar opened this issue Jan 2, 2024 · 1 comment

Comments

@simgar
Copy link

simgar commented Jan 2, 2024

On Ubuntu 22.04.3 LTS, I am using a micro:bit v1 and am here: https://github.com/rust-embedded/discovery/blob/master/microbit/src/03-setup/verify.md

When I ran lsusb | grep -i "NXP ARM mbed", I got
Bus 001 Device 010: ID 0d28:0204 NXP ARM mbed

and when I ran ls -l /dev/bus/usb/001/010, I got
crw-rw-rw-+ 1 root plugdev 189, 9 Jan 2 17:22 /dev/bus/usb/001/010

so I think I did the previous instructions correctly.

From, ~/projects/discovery/microbit/src/03-setup$, I run cargo embed --target thumbv6m-none-eabi and I get

Finished dev [unoptimized + debuginfo] target(s) in 0.01s
  Config default
  Target /home/simon/projects/discovery/microbit/target/thumbv6m-none-eabi/debug/rtt-check
   Error Probe could not be created
         
         Caused by:
             0: hidapi error: Failed to open a device with path '/dev/hidraw4': Permission denied
             1: hidapi error: Failed to open a device with path '/dev/hidraw4': Permission denied

I found this: #490 so I renamed the file to 70-microbit.rules (I'm not sure of the significance of the prefix) and changed the content as described but I got the same errors as shown above.

Update

I bought a micro:bit v2 and tried it on the same machine and it worked okay.
I also took a Raspberry Pi 4, and with a new SD card image (Debian GNU/Linux 12 (bookworm)), installed Rust and followed the instructions up to chapter 3. The micro:bit v2 also worked on the Pi and the original v1 micro:bit also failed, this time with:

Finished dev [unoptimized + debuginfo] target(s) in 7.88s
  Config default
  Targe    Finished dev [unoptimized + debuginfo] target(s) in 7.88s
  Config default
  Target /home/simon/projects/discovery/microbit/target/thumbv6m-none-eabi/debug/rtt-check
   Error Probe could not be created
         
         Caused by:
             0: hidapi error: Failed to open a device with path '/dev/hidraw0': Permission denied
             1: hidapi error: Failed to open a device with path '/dev/hidraw0': Permission denied

Running ls -l /dev/hidraw0
gives:

crw------- 1 root root 242, 0 Jan  9 17:53 /dev/hidraw0
@l-0-l
Copy link

l-0-l commented Jun 11, 2024

I have a micro:bit v1 only, encountered the same issue. Had to use a more general rule (which should work for all CMSIS-DAP devices) based on probe_rs rules file:

$ cat /etc/udev/rules.d/69-microbit.rules 
# CMSIS-DAP for microbit
ATTRS{product}=="*CMSIS-DAP*", MODE="666", GROUP="plugdev", TAG+="uaccess"

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants