Skip to content

ryanbooker/pijul-prompt.zsh

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Pijul Prompt

A fast, customisable, pure-shell, asynchronous Pijul prompt for Zsh.

It is heavily inspired by and essentially a fork of Wolfgang Popp's git-prompt.zsh with the Awk parser updated for Pijul. In turn, git-prompt.zsh is heavily inspired by Olivier Verdier's zsh-git-prompt and very similar to the "Informative VCS" prompt of fish shell.

Most of the credit should go to them 🙏.

Prompt Structure

The structure of the prompt (in the default configuration) is the following:

[<channel><remote>|<local_status>]
  • channel: Name of the current channel.
  • remote: Path of the remote if it exists. Must be enabled explicitly (see Enable remote info).
  • local_status:
    • : repository is clean
    • ∆n: there are n changed files
    • +n: there are n added files
    • −n: there are n deleted files
    • ✝n: there are n resurrected zombies
    • ⛙n: there are n solved conflicts
    • ×n: there are n unsolved conflicts
    • …n: there are n untracked files

Installation

Dependencies

  • pijul
  • awk, which is most certainly preinstalled on any *nix system.

Manual installation

Clone this repo or download the pijul-prompt.zsh file. Then source it in your .zshrc. For example:

mkdir -p ~/.zsh
pijul clone https://nest.pijul.com/ryanbooker/pijul-prompt.zsh ~/.zsh/pijul-prompt.zsh
echo "source ~/.zsh/pijul-prompt.zsh/pijul-prompt.zsh" >> .zshrc

# Optional: install an example configuration
echo "source ~/.zsh/pijul-prompt.zsh/examples/default.zsh" >> .zshrc

Either install the default prompt (see Examples section below) with

# Installs the "default" example
zplug "ryanbooker/pijul-prompt.zsh"

or choose an example prompt with

# Installs the "multiline" example
zplug "ryanbooker/pijul-prompt.zsh", use:"{pijul-prompt.zsh,examples/default.zsh}"
zplugin ice atload'!_zsh_pijul_prompt_precmd_hook' lucid
zplugin load ryanbooker/pijul-prompt.zsh

Note that this method does not work if you want to disable the asynchronous rendering.

Customization

Unlike other popular prompts this prompt does not use promptinit, which gives you the flexibility to build your own prompt from scratch. You can build a custom prompt by setting the PROMPT variable in your .zshrc after souring the pijul-prompt.zsh. And you should use '$(pijul_prompt)' in your PROMPT to get the Prijul prompt. You must set your PROMPT with single quotes, not double quotes, otherwise the Pijul prompt will not update properly. Some example PROMPT configurations are given below. You can find more information on how to configure the PROMPT in Zsh's online documentation or the zshmisc manpage, section "SIMPLE PROMPT ESCAPES".

Examples

See examples/README.md for more details.

Appearance

The appearance of the prompt can be adjusted by changing the variables that start with ZSH_THEME_PIJUL_PROMPT_.

You can preview your configuration by setting the ZSH_THEME_PIJUL_PROMPT_* variables in a running shell. But remember to save them in your .zshrc after you tweaked them to your liking! Example snippet from .zshrc:

ZSH_THEME_PIJUL_PROMPT_PREFIX="["
ZSH_THEME_PIJUL_PROMPT_SUFFIX="] "
ZSH_THEME_PIJUL_PROMPT_SEPARATOR="|"
ZSH_THEME_PIJUL_PROMPT_CHANNEL="%{$fg_bold[magenta]%}"
ZSH_THEME_PIJUL_PROMPT_REMOTE_SYMBOL="%{$fg_bold[yellow]%}⟳ "
ZSH_THEME_PIJUL_PROMPT_REMOTE_NO_TRACKING=""
ZSH_THEME_PIJUL_PROMPT_REMOTE_PREFIX="%{$fg[red]%}(%{$fg[yellow]%}"
ZSH_THEME_PIJUL_PROMPT_REMOTE_SUFFIX="%{$fg[red]%})"
ZSH_THEME_PIJUL_PROMPT_CHANGED="%{$fg[blue]%}∆"
ZSH_THEME_PIJUL_PROMPT_ADDED="%{$fg[green]%}+"
ZSH_THEME_PIJUL_PROMPT_REMOVED="%{$fg[red]%}−"
ZSH_THEME_PIJUL_PROMPT_RESURRECTED=""
ZSH_THEME_PIJUL_PROMPT_SOLVED="%{$fg[magenta]%}⛙"
ZSH_THEME_PIJUL_PROMPT_UNSOLVED="%{$fg[yellow]%}×"
ZSH_THEME_PIJUL_PROMPT_UNTRACKED=""
ZSH_THEME_PIJUL_PROMPT_CLEAN="%{$fg_bold[green]%}✔"

source path/to/pijul-prompt.zsh

Enable remote info

The prompt will show information about the remote, if ZSH_PIJUL_PROMPT_SHOW_REMOTE is set to full or symbol. The full option will print the full remote path enclosed by ZSH_THEME_PIJUL_PROMPT_REMOTE_PREFIX and ZSH_THEME_PIJUL_PROMPT_REMOTE_SUFFIX. The symbol option prints only ZSH_THEME_PIJUL_PROMPT_REMOTE_SYMBOL.

Furthermore, a warning symbol can be configured through ZSH_THEME_PIJUL_PROMPT_REMOTE_NO_TRACKING for the case where no remote is available. ZSH_THEME_PIJUL_PROMPT_REMOTE_NO_TRACKING can be set independently of ZSH_PIJUL_PROMPT_SHOW_REMOTE.

Disable display of numbers

By default, the prompt will show counts for each item in the tracking status and local status sections. (See Prompt Structure for details about these sections.) However, you can disable the display of counts for either or both sections of the prompt using ZSH_PIJUL_PROMPT_SHOW_TRACKING_COUNTS and ZSH_PIJUL_PROMPT_SHOW_LOCAL_COUNTS. If you set these variables to anything other than 1, then the symbols will be shown but not the counts. For example, a prompt such as [master|✚2] will become [master|✚] instead.

Force blank

Since the prompt is asynchronous by default, the Pijul status updates slightly delayed. This has the benefit that the prompt will always be responsive even if the repository is huge and/or your disk is slow. But it also means that the old status will be displayed for some time. You can force the prompt to blank out instead of displaying a potentially outdated status, but be warned that this will probably increase flickering. Set the following variable in your .zshrc to enable this behavior:

ZSH_PIJUL_PROMPT_FORCE_BLANK=1

Disable async

If you are not happy with the asynchronous behavior, you can disable it altogether. But be warned that this can make your shell painfully slow if you enter large repositories or if your disk is slow. Set the following variable in your .zshrc before sourcing the pijul-prompt.zsh to enable this behavior.

ZSH_PIJUL_PROMPT_NO_ASYNC=1

ZSH_PIJUL_PROMPT_NO_ASYNC cannot be adjusted in a running shell, but only in your .zshrc.

Change the awk implementation

Some awk implementations are faster than others. By default, the prompt checks for nawk and then mawk and then falls back to the system's default awk. You can override this behavior by setting ZSH_PIJUL_PROMPT_AWK_CMD to the awk implementation of you liking before sourcing the pijul-prompt.zsh. ZSH_PIJUL_PROMPT_AWK_CMD cannot be adjusted in a running shell, but only in your .zshrc.

To benchmark an awk implementation you can use the following command.

# This example tests the default awk. You should change it to something else.
time ZSH_PIJUL_PROMPT_AWK_CMD=awk zsh -f -c '
    source path/to/pijul-prompt.zsh
    for i in $(seq 1000); do
        print -P $(_zsh_pijul_prompt_pijul_status)
    done'

Features / Non-Features

  • A pure shell implementation using awk; no Python, no Haskell required
  • Only the Pijul status; This prompt basically only gives you the pijul_prompt function, which you can use to build your own prompt.
  • Fast; Pijul commands are invoked as few times as possible and asynchronously when a new prompt is drawn.

Known issues

  • If the current working directory is not a Pijul repository and some external application initializes a new repository in the same directory, the Pijul prompt will not be shown immediately. Also, updates made by external programs or another shell do not show up immediately. Executing any command or simply pressing enter to draw a new prompt will fix the issue.
  • In large repositories the prompt might slow down, because Pijul has to do whatever it has to do.

About

A lightweight Pijul prompt for Zsh — Mirrored from The Nest for plugin support

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages