at86rf231.h

/*
 * Copyright (c) 2008 Atmel Corporation.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 * - The name of Atmel may not be used to endorse or promote products derived
 *   from this software without specific prior written permission.
 * - This software may only be redistributed and used in connection with an
 *   Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *
 * Driver for AT86RF231 transceiver.
 */
/**
 * @file at86rf231.h
 *
 * @brief File contains register and command defines specific for AT86RF231.
 *
 * $Id: at86rf231.h 12162 2008-11-21 17:11:26Z uwalter $
 *
 * @author    Atmel Corporation: http://www.atmel.com
 * @author    Support email: avr@atmel.com
 */

/* Prevent double inclusion */
#ifndef AT86RF231_H
#define AT86RF231_H

/* === INCLUDES ============================================================ */

//#include "tal_types.h"
//#if (TAL_TYPE == AT86RF231)

/* === EXTERNALS =========================================================== */


/* === TYPES =============================================================== */


/* === MACROS ============================================================== */

#define TRX_SUPPORTED_CHANNELS          (0x07FFF800)

/**
 * Tolerance of the phyTransmitPower PIB attribute.  This is encoded
 * into the two MSBits of the attribute, and is effectively read-only.
 */
#define TX_PWR_TOLERANCE                (0x80)

/*
 * Timing parameters
 */
#define RST_PULSE_WIDTH_US              (1)
#define SLEEP_TO_TRX_OFF_US             (240)
#define P_ON_TO_CLKM_AVAILABLE          (380)
#define PLL_LOCK_TIME_US                (110) /* us */
#define TRX_OFF_TO_SLEEP_TIME           (35)  /* us */
#define TRX_IRQ_DELAY_US                (9)

/*
 * CSMA timimg parameters
 */
#define CCA_DETECTION_TIME_SYM          (8)
#define CCA_PROCESS_TIME_SYM            (1)
#define CCA_DURATION_SYM                (CCA_DETECTION_TIME_SYM + CCA_PROCESS_TIME_SYM)
#define CSMA_PROCESSING_TIME_US         (100)
#define CCA_PREPARATION_DURATION_US     (50)
#define CCA_PRE_START_DURATION_US       (20)
#define PRE_TX_DURATTION_US             (32)    // 16 us processing delay +
                                                // 16 us software handling duration

/** Register addresses */


/** Offset for register ANT_DIV */
#define RG_ANT_DIV   (0x0d)

/** Offset for register BATMON */
#define RG_BATMON   (0x11)

/** Offset for register CCA_THRES */
#define RG_CCA_THRES   (0x09)

/** Offset for register CSMA_BE */
#define RG_CSMA_BE   (0x2f)

/** Offset for register CSMA_SEED_0 */
#define RG_CSMA_SEED_0   (0x2d)

/** Offset for register CSMA_SEED_1 */
#define RG_CSMA_SEED_1   (0x2e)

/** Offset for register FTN_CTRL */
#define RG_FTN_CTRL   (0x18)

/** Offset for register IEEE_ADDR_0 */
#define RG_IEEE_ADDR_0   (0x24)

/** Offset for register IEEE_ADDR_1 */
#define RG_IEEE_ADDR_1   (0x25)

/** Offset for register IEEE_ADDR_2 */
#define RG_IEEE_ADDR_2   (0x26)

/** Offset for register IEEE_ADDR_3 */
#define RG_IEEE_ADDR_3   (0x27)

/** Offset for register IEEE_ADDR_4 */
#define RG_IEEE_ADDR_4   (0x28)

/** Offset for register IEEE_ADDR_5 */
#define RG_IEEE_ADDR_5   (0x29)

/** Offset for register IEEE_ADDR_6 */
#define RG_IEEE_ADDR_6   (0x2a)

/** Offset for register IEEE_ADDR_7 */
#define RG_IEEE_ADDR_7   (0x2b)

/** Offset for register IRQ_MASK */
#define RG_IRQ_MASK   (0x0e)

/** Offset for register IRQ_STATUS */
#define RG_IRQ_STATUS   (0x0f)

/** Offset for register MAN_ID_0 */
#define RG_MAN_ID_0   (0x1e)

/** Offset for register MAN_ID_1 */
#define RG_MAN_ID_1   (0x1f)

/** Offset for register PAN_ID_0 */
#define RG_PAN_ID_0   (0x22)

/** Offset for register PAN_ID_1 */
#define RG_PAN_ID_1   (0x23)

/** Offset for register PART_NUM */
#define RG_PART_NUM   (0x1c)

/** Offset for register PHY_CC_CCA */
#define RG_PHY_CC_CCA   (0x08)

/** Offset for register PHY_ED_LEVEL */
#define RG_PHY_ED_LEVEL   (0x07)

/** Offset for register PHY_RSSI */
#define RG_PHY_RSSI   (0x06)

/** Offset for register PHY_TX_PWR */
#define RG_PHY_TX_PWR   (0x05)

/** Offset for register PLL_CF */
#define RG_PLL_CF   (0x1a)

/** Offset for register PLL_DCU */
#define RG_PLL_DCU   (0x1b)

/** Offset for register RX_CTRL */
#define RG_RX_CTRL   (0x0a)

/** Offset for register RX_SYN */
#define RG_RX_SYN   (0x15)

/** Offset for register SFD_VALUE */
#define RG_SFD_VALUE   (0x0b)

/** Offset for register SHORT_ADDR_0 */
#define RG_SHORT_ADDR_0   (0x20)

/** Offset for register SHORT_ADDR_1 */
#define RG_SHORT_ADDR_1   (0x21)

/** Offset for register TRX_CTRL_0 */
#define RG_TRX_CTRL_0   (0x03)

/** Offset for register TRX_CTRL_1 */
#define RG_TRX_CTRL_1   (0x04)

/** Offset for register TRX_CTRL_2 */
#define RG_TRX_CTRL_2   (0x0c)

/** Offset for register TRX_STATE */
#define RG_TRX_STATE   (0x02)

/** Offset for register TRX_STATUS */
#define RG_TRX_STATUS   (0x01)

/** Offset for register VERSION_NUM */
#define RG_VERSION_NUM   (0x1d)

/** Offset for register VREG_CTRL */
#define RG_VREG_CTRL   (0x10)

/** Offset for register XAH_CTRL_0 */
#define RG_XAH_CTRL_0   (0x2c)

/** Offset for register XAH_CTRL_1 */
#define RG_XAH_CTRL_1   (0x17)

/** Offset for register XOSC_CTRL */
#define RG_XOSC_CTRL   (0x12)


/** Subregister access */


/** Access parameters for sub-register AACK_ACK_TIME in register RG_XAH_CTRL_1 */
#define SR_AACK_ACK_TIME   0x17, 0x04, 2

/** Access parameters for sub-register AACK_DIS_ACK in register RG_CSMA_SEED_1 */
#define SR_AACK_DIS_ACK   0x2e, 0x10, 4

/** Access parameters for sub-register AACK_FLTR_RES_FT in register RG_XAH_CTRL_1 */
#define SR_AACK_FLTR_RES_FT   0x17, 0x20, 5

/** Access parameters for sub-register AACK_FVN_MODE in register RG_CSMA_SEED_1 */
#define SR_AACK_FVN_MODE   0x2e, 0xc0, 6

/** Access parameters for sub-register AACK_I_AM_COORD in register RG_CSMA_SEED_1 */
#define SR_AACK_I_AM_COORD   0x2e, 0x08, 3

/** Access parameters for sub-register AACK_PROM_MODE in register RG_XAH_CTRL_1 */
#define SR_AACK_PROM_MODE   0x17, 0x02, 1

/** Access parameters for sub-register AACK_SET_PD in register RG_CSMA_SEED_1 */
#define SR_AACK_SET_PD   0x2e, 0x20, 5

/** Access parameters for sub-register AACK_UPLD_RES_FT in register RG_XAH_CTRL_1 */
#define SR_AACK_UPLD_RES_FT   0x17, 0x10, 4

/** Access parameters for sub-register ANT_CTRL in register RG_ANT_DIV */
#define SR_ANT_CTRL   0x0d, 0x03, 0

/** Access parameters for sub-register ANT_DIV_EN in register RG_ANT_DIV */
#define SR_ANT_DIV_EN   0x0d, 0x08, 3

/** Access parameters for sub-register ANT_EXT_SW_EN in register RG_ANT_DIV */
#define SR_ANT_EXT_SW_EN   0x0d, 0x04, 2

/** Access parameters for sub-register ANT_SEL in register RG_ANT_DIV */
#define SR_ANT_SEL   0x0d, 0x80, 7

/** Access parameters for sub-register AVDD_OK in register RG_VREG_CTRL */
#define SR_AVDD_OK   0x10, 0x40, 6

/** Access parameters for sub-register AVREG_EXT in register RG_VREG_CTRL */
#define SR_AVREG_EXT   0x10, 0x80, 7

/** Access parameters for sub-register BATMON_HR in register RG_BATMON */
#define SR_BATMON_HR   0x11, 0x10, 4

/** Access parameters for sub-register BATMON_OK in register RG_BATMON */
#define SR_BATMON_OK   0x11, 0x20, 5

/** Access parameters for sub-register BATMON_VTH in register RG_BATMON */
#define SR_BATMON_VTH   0x11, 0x0f, 0

/** Access parameters for sub-register CCA_DONE in register RG_TRX_STATUS */
#define SR_CCA_DONE   0x01, 0x80, 7

/** Access parameters for sub-register CCA_ED_THRES in register RG_CCA_THRES */
#define SR_CCA_ED_THRES   0x09, 0x0f, 0

/** Access parameters for sub-register CCA_MODE in register RG_PHY_CC_CCA */
#define SR_CCA_MODE   0x08, 0x60, 5

/** Access parameters for sub-register CCA_REQUEST in register RG_PHY_CC_CCA */
#define SR_CCA_REQUEST   0x08, 0x80, 7

/** Access parameters for sub-register CCA_STATUS in register RG_TRX_STATUS */
#define SR_CCA_STATUS   0x01, 0x40, 6

/** Access parameters for sub-register CHANNEL in register RG_PHY_CC_CCA */
#define SR_CHANNEL   0x08, 0x1f, 0

/** Access parameters for sub-register CLKM_CTRL in register RG_TRX_CTRL_0 */
#define SR_CLKM_CTRL   0x03, 0x07, 0

/** Access parameters for sub-register CLKM_SHA_SEL in register RG_TRX_CTRL_0 */
#define SR_CLKM_SHA_SEL   0x03, 0x08, 3

/** Access parameters for sub-register CSMA_SEED_0 in register RG_CSMA_SEED_0 */
#define SR_CSMA_SEED_0   0x2d, 0xff, 0

/** Access parameters for sub-register CSMA_SEED_1 in register RG_CSMA_SEED_1 */
#define SR_CSMA_SEED_1   0x2e, 0x07, 0

/** Access parameters for sub-register DVDD_OK in register RG_VREG_CTRL */
#define SR_DVDD_OK   0x10, 0x04, 2

/** Access parameters for sub-register DVREG_EXT in register RG_VREG_CTRL */
#define SR_DVREG_EXT   0x10, 0x08, 3

/** Access parameters for sub-register ED_LEVEL in register RG_PHY_ED_LEVEL */
#define SR_ED_LEVEL   0x07, 0xff, 0

/** Access parameters for sub-register FTN_START in register RG_FTN_CTRL */
#define SR_FTN_START   0x18, 0x80, 7

/** Access parameters for sub-register IEEE_ADDR_0 in register RG_IEEE_ADDR_0 */
#define SR_IEEE_ADDR_0   0x24, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_1 in register RG_IEEE_ADDR_1 */
#define SR_IEEE_ADDR_1   0x25, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_2 in register RG_IEEE_ADDR_2 */
#define SR_IEEE_ADDR_2   0x26, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_3 in register RG_IEEE_ADDR_3 */
#define SR_IEEE_ADDR_3   0x27, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_4 in register RG_IEEE_ADDR_4 */
#define SR_IEEE_ADDR_4   0x28, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_5 in register RG_IEEE_ADDR_5 */
#define SR_IEEE_ADDR_5   0x29, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_6 in register RG_IEEE_ADDR_6 */
#define SR_IEEE_ADDR_6   0x2a, 0xff, 0

/** Access parameters for sub-register IEEE_ADDR_7 in register RG_IEEE_ADDR_7 */
#define SR_IEEE_ADDR_7   0x2b, 0xff, 0

/** Access parameters for sub-register IRQ_0_PLL_LOCK in register RG_IRQ_STATUS */
#define SR_IRQ_0_PLL_LOCK   0x0f, 0x01, 0

/** Access parameters for sub-register IRQ_1_PLL_UNLOCK in register RG_IRQ_STATUS */
#define SR_IRQ_1_PLL_UNLOCK   0x0f, 0x02, 1

/** Access parameters for sub-register IRQ_2_EXT_EN in register RG_TRX_CTRL_1 */
#define SR_IRQ_2_EXT_EN   0x04, 0x40, 6

/** Access parameters for sub-register IRQ_2_RX_START in register RG_IRQ_STATUS */
#define SR_IRQ_2_RX_START   0x0f, 0x04, 2

/** Access parameters for sub-register IRQ_3_TRX_END in register RG_IRQ_STATUS */
#define SR_IRQ_3_TRX_END   0x0f, 0x08, 3

/** Access parameters for sub-register IRQ_4_CCA_ED_READY in register RG_IRQ_STATUS */
#define SR_IRQ_4_CCA_ED_READY   0x0f, 0x10, 4

/** Access parameters for sub-register IRQ_5_AMI in register RG_IRQ_STATUS */
#define SR_IRQ_5_AMI   0x0f, 0x20, 5

/** Access parameters for sub-register IRQ_6_TRX_UR in register RG_IRQ_STATUS */
#define SR_IRQ_6_TRX_UR   0x0f, 0x40, 6

/** Access parameters for sub-register IRQ_7_BAT_LOW in register RG_IRQ_STATUS */
#define SR_IRQ_7_BAT_LOW   0x0f, 0x80, 7

/** Access parameters for sub-register IRQ_MASK in register RG_IRQ_MASK */
#define SR_IRQ_MASK   0x0e, 0xff, 0

/** Access parameters for sub-register IRQ_MASK_MODE in register RG_TRX_CTRL_1 */
#define SR_IRQ_MASK_MODE   0x04, 0x02, 1

/** Access parameters for sub-register IRQ_POLARITY in register RG_TRX_CTRL_1 */
#define SR_IRQ_POLARITY   0x04, 0x01, 0

/** Access parameters for sub-register MAN_ID_0 in register RG_MAN_ID_0 */
#define SR_MAN_ID_0   0x1e, 0xff, 0

/** Access parameters for sub-register MAN_ID_1 in register RG_MAN_ID_1 */
#define SR_MAN_ID_1   0x1f, 0xff, 0

/** Access parameters for sub-register MAX_BE in register RG_CSMA_BE */
#define SR_MAX_BE   0x2f, 0xf0, 4

/** Access parameters for sub-register MAX_CSMA_RETRIES in register RG_XAH_CTRL_0 */
#define SR_MAX_CSMA_RETRIES   0x2c, 0x0e, 1

/** Access parameters for sub-register MAX_FRAME_RETRIES in register RG_XAH_CTRL_0 */
#define SR_MAX_FRAME_RETRIES   0x2c, 0xf0, 4

/** Access parameters for sub-register MIN_BE in register RG_CSMA_BE */
#define SR_MIN_BE   0x2f, 0x0f, 0

/** Access parameters for sub-register OQPSK_DATA_RATE in register RG_TRX_CTRL_2 */
#define SR_OQPSK_DATA_RATE   0x0c, 0x03, 0

/** Access parameters for sub-register PA_BUF_LT in register RG_PHY_TX_PWR */
#define SR_PA_BUF_LT   0x05, 0xc0, 6

/** Access parameters for sub-register PA_EXT_EN in register RG_TRX_CTRL_1 */
#define SR_PA_EXT_EN   0x04, 0x80, 7

/** Access parameters for sub-register PA_LT in register RG_PHY_TX_PWR */
#define SR_PA_LT   0x05, 0x30, 4

/** Access parameters for sub-register PAD_IO in register RG_TRX_CTRL_0 */
#define SR_PAD_IO   0x03, 0xc0, 6

/** Access parameters for sub-register PAD_IO_CLKM in register RG_TRX_CTRL_0 */
#define SR_PAD_IO_CLKM   0x03, 0x30, 4

/** Access parameters for sub-register PAN_ID_0 in register RG_PAN_ID_0 */
#define SR_PAN_ID_0   0x22, 0xff, 0

/** Access parameters for sub-register PAN_ID_1 in register RG_PAN_ID_1 */
#define SR_PAN_ID_1   0x23, 0xff, 0

/** Access parameters for sub-register PART_NUM in register RG_PART_NUM */
#define SR_PART_NUM   0x1c, 0xff, 0

/** Access parameters for sub-register PDT_THRES in register RG_RX_CTRL */
#define SR_PDT_THRES   0x0a, 0x0f, 0

/** Access parameters for sub-register PLL_CF_START in register RG_PLL_CF */
#define SR_PLL_CF_START   0x1a, 0x80, 7

/** Access parameters for sub-register PLL_DCU_START in register RG_PLL_DCU */
#define SR_PLL_DCU_START   0x1b, 0x80, 7

/** Access parameters for sub-register RND_VALUE in register RG_PHY_RSSI */
#define SR_RND_VALUE   0x06, 0x60, 5

/** Access parameters for sub-register RSSI in register RG_PHY_RSSI */
#define SR_RSSI   0x06, 0x1f, 0

/** Access parameters for sub-register RX_BL_CTRL in register RG_TRX_CTRL_1 */
#define SR_RX_BL_CTRL   0x04, 0x10, 4

/** Access parameters for sub-register RX_CRC_VALID in register RG_PHY_RSSI */
#define SR_RX_CRC_VALID   0x06, 0x80, 7

/** Access parameters for sub-register RX_PDT_DIS in register RG_RX_SYN */
#define SR_RX_PDT_DIS   0x15, 0x80, 7

/** Access parameters for sub-register RX_PDT_LEVEL in register RG_RX_SYN */
#define SR_RX_PDT_LEVEL   0x15, 0x0f, 0

/** Access parameters for sub-register RX_SAFE_MODE in register RG_TRX_CTRL_2 */
#define SR_RX_SAFE_MODE   0x0c, 0x80, 7

/** Access parameters for sub-register SFD_VALUE in register RG_SFD_VALUE */
#define SR_SFD_VALUE   0x0b, 0xff, 0

/** Access parameters for sub-register SHORT_ADDR_0 in register RG_SHORT_ADDR_0 */
#define SR_SHORT_ADDR_0   0x20, 0xff, 0

/** Access parameters for sub-register SHORT_ADDR_1 in register RG_SHORT_ADDR_1 */
#define SR_SHORT_ADDR_1   0x21, 0xff, 0

/** Access parameters for sub-register SLOTTED_OPERATION in register RG_XAH_CTRL_0 */
#define SR_SLOTTED_OPERATION   0x2c, 0x01, 0

/** Access parameters for sub-register SPI_CMD_MODE in register RG_TRX_CTRL_1 */
#define SR_SPI_CMD_MODE   0x04, 0x0c, 2

/** Access parameters for sub-register TRAC_STATUS in register RG_TRX_STATE */
#define SR_TRAC_STATUS   0x02, 0xe0, 5

/** Access parameters for sub-register TRX_CMD in register RG_TRX_STATE */
#define SR_TRX_CMD   0x02, 0x1f, 0

/** Access parameters for sub-register TRX_STATUS in register RG_TRX_STATUS */
#define SR_TRX_STATUS   0x01, 0x1f, 0

/** Access parameters for sub-register TX_AUTO_CRC_ON in register RG_TRX_CTRL_1 */
#define SR_TX_AUTO_CRC_ON   0x04, 0x20, 5

/** Access parameters for sub-register TX_PWR in register RG_PHY_TX_PWR */
#define SR_TX_PWR   0x05, 0x0f, 0

/** Access parameters for sub-register VERSION_NUM in register RG_VERSION_NUM */
#define SR_VERSION_NUM   0x1d, 0xff, 0

/** Access parameters for sub-register XTAL_MODE in register RG_XOSC_CTRL */
#define SR_XTAL_MODE   0x12, 0xf0, 4

/** Access parameters for sub-register XTAL_TRIM in register RG_XOSC_CTRL */
#define SR_XTAL_TRIM   0x12, 0x0f, 0



/** Constants */


/** Constant AACK_ACK_TIME_12_symbols for sub-register SR_AACK_ACK_TIME */
#define AACK_ACK_TIME_12_SYMBOLS   (0)

/** Constant AACK_ACK_TIME_2_symbols for sub-register SR_AACK_ACK_TIME */
#define AACK_ACK_TIME_2_SYMBOLS   (1)

/** Security module control, AES mode, SRAM address */
#define AES_CON   (0x83)

/** AES core operation direction: Decryption (ECB) */
#define AES_DIR_DECRYPT   (0x08)

/** AES core operation direction: Encryption (ECB, CBC) */
#define AES_DIR_ENCRYPT   (0)

/** Set CBC mode */
#define AES_MODE_CBC   (0x20)

/** Set ECB mode */
#define AES_MODE_ECB   (0x0)

/** Set key mode */
#define AES_MODE_KEY   (0x10)

/** Initiate an AES operation */
#define AES_REQUEST   (0x80)

/** AES core operation status: AES module finished */
#define AES_RY_DONE   (1)

/** AES core operation status: AES module did not finish */
#define AES_RY_NOT_DONE   (0)

/** Signal status of the security module and operation, SRAM address */
#define AES_ST   (0x82)

/** Depending on AES mode, it contains either AES key or AES state, SRAM address */
#define AES_STATE_KEY   (0x84)

/** Constant ALTRATE_1Mbps for sub-register SR_OQPSK_DATA_RATE */
#define ALTRATE_1MBPS   (2)

/** Constant ALTRATE_250kbps for sub-register SR_OQPSK_DATA_RATE */
#define ALTRATE_250KBPS   (0)

/** Constant ALTRATE_2Mbps for sub-register SR_OQPSK_DATA_RATE */
#define ALTRATE_2MBPS   (3)

/** Constant ALTRATE_500kbps for sub-register SR_OQPSK_DATA_RATE */
#define ALTRATE_500KBPS   (1)

/** Constant ANT_DIV_disable for sub-register SR_ANT_DIV_EN */
#define ANT_DIV_DISABLE   (0)

/** Constant ANT_DIV_enable for sub-register SR_ANT_DIV_EN */
#define ANT_DIV_ENABLE   (1)

/** Constant ANT_EXT_SW_switch_disable for sub-register SR_ANT_EXT_SW_EN */
#define ANT_EXT_SW_SWITCH_DISABLE   (0)

/** Constant ANT_EXT_SW_switch_enable for sub-register SR_ANT_EXT_SW_EN */
#define ANT_EXT_SW_SWITCH_ENABLE   (1)

/** Constant ANT_SEL_antenna_0 for sub-register SR_ANT_SEL */
#define ANT_SEL_ANTENNA_0   (0)

/** Constant ANT_SEL_antenna_1 for sub-register SR_ANT_SEL */
#define ANT_SEL_ANTENNA_1   (1)

/** Constant BATMON_not_valid for sub-register SR_BATMON_OK */
#define BATMON_NOT_VALID   (0)

/** Constant BATMON_valid for sub-register SR_BATMON_OK */
#define BATMON_VALID   (1)

/** Constant CCA_calculation_done for sub-register SR_CCA_DONE */
#define CCA_DETECTION_DONE   (1)

/** Constant CCA_calculation_not_finished for sub-register SR_CCA_DONE */
#define CCA_DETECTION_NOT_DONE   (0)

/** Constant CCA_Mode_0 for sub-register SR_CCA_MODE */
#define CCA_MODE_0   (0)

/** Constant CCA_Mode_1 for sub-register SR_CCA_MODE */
#define CCA_MODE_1   (1)

/** Constant CCA_Mode_2 for sub-register SR_CCA_MODE */
#define CCA_MODE_2   (2)

/** Constant CCA_Mode_3 for sub-register SR_CCA_MODE */
#define CCA_MODE_3   (3)

/** Constant CCA_STATUS_channel_is_busy for sub-register SR_CCA_STATUS */
#define CCA_STATUS_CHANNEL_IS_BUSY   (0)

/** Constant CCA_STATUS_channel_is_idle for sub-register SR_CCA_STATUS */
#define CCA_STATUS_CHANNEL_IS_IDLE   (1)

/** Constant CLKM_16MHz for sub-register SR_CLKM_CTRL */
#define CLKM_16MHZ   (5)

/** Constant CLKM_1_16MHz for sub-register SR_CLKM_CTRL */
#define CLKM_1_16MHZ   (7)

/** Constant CLKM_1_4MHz for sub-register SR_CLKM_CTRL */
#define CLKM_1_4MHZ   (6)

/** Constant CLKM_1MHz for sub-register SR_CLKM_CTRL */
#define CLKM_1MHZ   (1)

/** Constant CLKM_2MHz for sub-register SR_CLKM_CTRL */
#define CLKM_2MHZ   (2)

/** Constant CLKM_4MHz for sub-register SR_CLKM_CTRL */
#define CLKM_4MHZ   (3)

/** Constant CLKM_8MHz for sub-register SR_CLKM_CTRL */
#define CLKM_8MHZ   (4)

/** Constant CLKM_no_clock for sub-register SR_CLKM_CTRL */
#define CLKM_NO_CLOCK   (0)

/** Constant CLKM_SHA_disable for sub-register SR_CLKM_SHA_SEL */
#define CLKM_SHA_DISABLE   (0)

/** Constant CLKM_SHA_enable for sub-register SR_CLKM_SHA_SEL */
#define CLKM_SHA_ENABLE   (1)

/** Constant CRC16_not_valid for sub-register SR_RX_CRC_VALID */
#define CRC16_NOT_VALID   (0)

/** Constant CRC16_valid for sub-register SR_RX_CRC_VALID */
#define CRC16_VALID   (1)

/** Constant IRQ_MASK_MODE_ENABLEDONLY for sub-register SR_IRQ_MASK_MODE */
#define IRQ_MASK_MODE_ENABLEDONLY  (0)

/** Constant IRQ_MASK_MODE_ALL for sub-register SR_IRQ_MASK_MODE */
#define IRQ_MASK_MODE_ALL   (1)

/** Constant IRQ_POL_high_active_IRQ for sub-register SR_IRQ_POLARITY */
#define IRQ_POL_HIGH_ACTIVE_IRQ   (0)

/** Constant IRQ_POL_low_active_IRQ for sub-register SR_IRQ_POLARITY */
#define IRQ_POL_LOW_ACTIVE_IRQ   (1)

/** Constant PA_BUF_LT_0s for sub-register SR_PA_BUF_LT */
#define PA_BUF_LT_0_US   (0)

/** Constant PA_BUF_LT_2s for sub-register SR_PA_BUF_LT */
#define PA_BUF_LT_2_US   (1)

/** Constant PA_BUF_LT_4s for sub-register SR_PA_BUF_LT */
#define PA_BUF_LT_4_US (2)

/** Constant PA_BUF_LT_6s for sub-register SR_PA_BUF_LT */
#define PA_BUF_LT_6_US (3)

/** Constant PA_LT_2s for sub-register SR_PA_LT */
#define PA_LT_2_US (0)

/** Constant PA_LT_4s for sub-register SR_PA_LT */
#define PA_LT_4_US   (1)

/** Constant PA_LT_6s for sub-register SR_PA_LT */
#define PA_LT_6_US   (2)

/** Constant PA_LT_8s for sub-register SR_PA_LT */
#define PA_LT_8_US   (3)

/** Constant PAD_CLKM_2mA for sub-register SR_PAD_IO_CLKM */
#define PAD_CLKM_2_MA   (0)

/** Constant PAD_CLKM_4mA for sub-register SR_PAD_IO_CLKM */
#define PAD_CLKM_4_MA   (1)

/** Constant PAD_CLKM_6mA for sub-register SR_PAD_IO_CLKM */
#define PAD_CLKM_6_MA   (2)

/** Constant PAD_CLKM_8mA for sub-register SR_PAD_IO_CLKM */
#define PAD_CLKM_8_MA   (3)

/** Constant PAD_IO_2mA for sub-register SR_PAD_IO */
#define PAD_IO_2_MA   (0)

/** Constant PAD_IO_4mA for sub-register SR_PAD_IO */
#define PAD_IO_4_MA   (1)

/** Constant PAD_IO_6mA for sub-register SR_PAD_IO */
#define PAD_IO_6_MA   (2)

/** Constant PAD_IO_8mA for sub-register SR_PAD_IO */
#define PAD_IO_8_MA   (3)

/** Constant RF231 for sub-register SR_PART_NUM */
#define AT86RF231_PART_NUM   (3)

/** Constant RF231 for sub-register SR_VERSION_NUM */
#define AT86RF231_VERSION_NUM   (2)

/** RF231 FIFO size. */
#define RF231_RAM_SIZE   (0x80)

/** mirrored version of AES_CON, SRAM address */
#define RG_AES_CON_MIRROR   (0x94)

/** Minimum RSSI sensitivity value in dBm, which is equivalent to the value 0 in sub register SR_RSSI. */
#define RSSI_BASE_VAL   (-90)

/** Constant SPI_CMD_MODE_default for sub-register SR_SPI_CMD_MODE */
#define SPI_CMD_MODE_DEFAULT   (0)

/** Constant SPI_CMD_MODE_monitor_IRQ_STATUS for sub-register SR_SPI_CMD_MODE */
#define SPI_CMD_MODE_MONITOR_IRQ_STATUS   (3)

/** Constant SPI_CMD_MODE_monitor_PHY_RSSI for sub-register SR_SPI_CMD_MODE */
#define SPI_CMD_MODE_MONITOR_PHY_RSSI   (2)

/** Constant SPI_CMD_MODE_monitor_TRX_STATUS for sub-register SR_SPI_CMD_MODE */
#define SPI_CMD_MODE_MONITOR_TRX_STATUS   (1)

/** Duration of an octet for 250kb/s OQPSK mode in us */
#define T_OCT   32

/** Duration of an symbol for 250kb/s OQPSK mode in us */
#define T_SYM   16

/** Data block size in bytes. */
#define TRX_AES_BLOCK_SIZE   (16)

/** Constant RX_ENABLE for sub-register RX_PDT_DIS */
#define RX_ENABLE             (0)

/** Constant RX_DISABLE for sub-register RX_PDT_DIS */
#define RX_DISABLE             (1)

/** Constant TX_AUTO_CRC_ENABLE for sub-register TX_AUTO_CRC_ON in register RG_TRX_CTRL_1 */
#define TX_AUTO_CRC_DISABLE   (0)

/** Constant TX_AUTO_CRC_ENABLE for sub-register TX_AUTO_CRC_ON in register RG_TRX_CTRL_1 */
#define TX_AUTO_CRC_ENABLE   (1)

/** Constant TIMESTAMPING_DISABLE for sub-register SR_IRQ_2_EXT_EN in register RG_TRX_CTRL_1 */
#define TIMESTAMPING_DISABLE   (0)

/** Constant TIMESTAMPING_ENABLE for sub-register SR_IRQ_2_EXT_EN in register RG_TRX_CTRL_1 */
#define TIMESTAMPING_ENABLE   (1)

/** Constant UPLD_RES_FT_DISBALE for sub-register AACK_UPLD_RES_FT in register RG_XAH_CTRL_1 */
#define UPLD_RES_FT_DISABLE     (0)

/** Constant UPLD_RES_FT_DISBALE for sub-register AACK_UPLD_RES_FT in register RG_XAH_CTRL_1 */
#define UPLD_RES_FT_ENABLE     (1)

/** Constant PROM_MODE_DISABLE for sub-register AACK_PROM_MODE in register RG_XAH_CTRL_1 */
#define PROM_MODE_DISABLE        (0)

/** Constant PROM_MODE_ENABLE for sub-register AACK_PROM_MODE in register RG_XAH_CTRL_1 */
#define PROM_MODE_ENABLE        (1)

/** Constant RX_SAFE_MODE_DISABLE for sub-register RX_SAFE_MODE in register RG_TRX_CTRL_2 */
#define RX_SAFE_MODE_DISABLE     (0)

/** Constant RX_SAFE_MODE_ENABLE for sub-register RX_SAFE_MODE in register RG_TRX_CTRL_2 */
#define RX_SAFE_MODE_ENABLE     (1)

/** Constant ACK_DISABLE for sub-register AACK_DIS_ACK in register RG_CSMA_SEED_1 */
#define ACK_DISABLE             (1)

/** Constant ACK_ENABLE for sub-register AACK_DIS_ACK in register RG_CSMA_SEED_1 */
#define ACK_ENABLE             (0)

/** Constant PD_ACK_BIT_SET_DISABLE for sub-register AACK_SET_PD in register RG_CSMA_SEED_1 */
#define PD_ACK_BIT_SET_DISABLE      (0)

/** Constant PD_ACK_BIT_SET_ENABLE for sub-register AACK_SET_PD in register RG_CSMA_SEED_1 */
#define PD_ACK_BIT_SET_ENABLE      (1)

/** Constant FRAME_VERSION_0 for sub-register AACK_FVN_MODE in register RG_CSMA_SEED_1 */
#define FRAME_VERSION_0         (0)

/** Constant FRAME_VERSION_01 for sub-register AACK_FVN_MODE in register RG_CSMA_SEED_1 */
#define FRAME_VERSION_01         (1)

/** Constant FRAME_VERSION_012 for sub-register AACK_FVN_MODE in register RG_CSMA_SEED_1 */
#define FRAME_VERSION_012         (2)

/** Constant FRAME_VERSION_IGNORED for sub-register AACK_FVN_MODE in register RG_CSMA_SEED_1 */
#define FRAME_VERSION_IGNORED         (3)

/** Constant THRES_ANT_DIV_ENABLE for sub-register SR_PDT_THRES in register RG_RX_CTRL */
#define THRES_ANT_DIV_ENABLE        (0x3)

/** Constant THRES_ANT_DIV_DISABLED for sub-register SR_PDT_THRES in register RG_RX_CTRL */
#define THRES_ANT_DIV_DISABLED       (0x7)

/** Constant ENABLE_ANTENNA_0 for sub-register SR_ANT_CTRL in register RG_ANT_DIV */
#define ENABLE_ANTENNA_0        (2)

/** Constant ENABLE_ANTENNA_1 for sub-register SR_ANT_CTRL in register RG_ANT_DIV */
#define ENABLE_ANTENNA_1        (1)

/** Constant ENABLE_ANTENNA_X for sub-register SR_ANT_CTRL in register RG_ANT_DIV */
#define ENABLE_ANTENNA_X        (3)

/** Constant CCA_START for sub-register CCA_REQUEST in register RG_PHY_CC_CCA */
#define CCA_START               (1)


/** Transceiver commands */
typedef enum trx_cmd_tag
{
    /** Constant CMD_NOP for sub-register SR_TRX_CMD */
    CMD_NOP                         = (0),

    /** Constant CMD_TX_START for sub-register SR_TRX_CMD */
    CMD_TX_START                    = (2),

    /** Constant CMD_FORCE_TRX_OFF for sub-register SR_TRX_CMD */
    CMD_FORCE_TRX_OFF               = (3),

    /** Constant CMD_FORCE_PLL_ON for sub-register SR_TRX_CMD */
    CMD_FORCE_PLL_ON                = (4),

    /** Constant CMD_RX_ON for sub-register SR_TRX_CMD */
    CMD_RX_ON                       = (6),

    /** Constant CMD_TRX_OFF for sub-register SR_TRX_CMD */
    CMD_TRX_OFF                     = (8),

    /** Constant CMD_PLL_ON for sub-register SR_TRX_CMD */
    CMD_PLL_ON                      = (9),

    /** Software implemented command */
    CMD_SLEEP                       = (15),

    /** Constant CMD_RX_AACK_ON for sub-register SR_TRX_CMD */
    CMD_RX_AACK_ON                  = (22),

    /** Constant CMD_TX_ARET_ON for sub-register SR_TRX_CMD */
    CMD_TX_ARET_ON                  = (25)
} trx_cmd_t;


/** Transceiver interrupt reasons */
typedef enum trx_irq_reason_tag
{
    /** No interrupt is indicated by IRQ_STATUS register */
    TRX_NO_IRQ                      = (0x00),

    /** PLL goes to lock-state. */
    TRX_IRQ_PLL_LOCK                = (0x01),

    /** Signals an unlocked PLL */
    TRX_IRQ_PLL_UNLOCK              = (0x02),

    /** Signals begin of a receiving frame */
    TRX_IRQ_RX_START                = (0x04),

    /** Signals end of frames (transmit and receive) */
    TRX_IRQ_TRX_END                 = (0x08),

    /**
     * Multi-functional interrupt:
     * AWAKE_END: Indicates that the radio transceiver reached TRX_OFF state after P_ON, RESET, or SLEEP states.
     * CCA_ED_READY: Signals the end of a CCA or ED measurement.
     */
    TRX_IRQ_CCA_ED_READY            = (0x10),

    /** Signals an address match. */
    TRX_IRQ_AMI                     = (0x20),

    /** Signals a FIFO underrun */
    TRX_IRQ_TRX_UR                  = (0x40),

    /** Signals low battery */
    TRX_IRQ_BAT_LOW                 = (0x80)
} trx_irq_reason_t;


/** Transceiver states */
typedef enum tal_trx_status_tag
{
    /** Constant P_ON for sub-register SR_TRX_STATUS */
    P_ON                            = (0),

    /** Constant BUSY_RX for sub-register SR_TRX_STATUS */
    BUSY_RX                         = (1),

    /** Constant BUSY_TX for sub-register SR_TRX_STATUS */
    BUSY_TX                         = (2),

    /** Constant RX_ON for sub-register SR_TRX_STATUS */
    RX_ON                           = (6),

    /** Constant TRX_OFF for sub-register SR_TRX_STATUS */
    TRX_OFF                         = (8),

    /** Constant PLL_ON for sub-register SR_TRX_STATUS */
    PLL_ON                          = (9),

    /** Constant SLEEP for sub-register SR_TRX_STATUS */
    TRX_SLEEP                       = (15),

    /** Constant BUSY_RX_AACK for sub-register SR_TRX_STATUS */
    BUSY_RX_AACK                    = (17),

    /** Constant BUSY_TX_ARET for sub-register SR_TRX_STATUS */
    BUSY_TX_ARET                    = (18),

    /** Constant RX_AACK_ON for sub-register SR_TRX_STATUS */
    RX_AACK_ON                      = (22),

    /** Constant TX_ARET_ON for sub-register SR_TRX_STATUS */
    TX_ARET_ON                      = (25),

    /** Constant RX_ON_NOCLK for sub-register SR_TRX_STATUS */
    RX_ON_NOCLK                     = (28),

    /** Constant RX_AACK_ON_NOCLK for sub-register SR_TRX_STATUS */
    RX_AACK_ON_NOCLK                = (29),

    /** Constant BUSY_RX_AACK_NOCLK for sub-register SR_TRX_STATUS */
    BUSY_RX_AACK_NOCLK              = (30),

    /** Constant STATE_TRANSITION_IN_PROGRESS for sub-register SR_TRX_STATUS */
    STATE_TRANSITION_IN_PROGRESS    = (31)
} tal_trx_status_t;


/** Transceiver's trac status */
typedef enum trx_trac_status_tag
{
    TRAC_SUCCESS = 0,
    TRAC_SUCCESS_DATA_PENDING = 1,
    TRAC_WAIT_FOR_ACK = 2,
    TRAC_CHANNEL_ACCESS_FAILURE = 3,
    TRAC_NO_ACK = 5,
    TRAC_INVALID = 7
} trx_trac_status_t;


/* === PROTOTYPES ========================================================== */

//#endif /* #if (TAL_TYPE == AT86RF231) */

#endif /* AT86RF231_H */