Skip to content

Latest commit

 

History

History
39 lines (30 loc) · 2.63 KB

README.md

File metadata and controls

39 lines (30 loc) · 2.63 KB

UnoVULine

Code written to run on the Arduino Nano or Uno to drive LED strips such as WS2812B as a stereo VU meter.

Features

  • 10 VU patterns that move in time to the music.
  • 7 standby patterns that move without audio input.
  • Press the button to change pattern, long press to automatically cycle through patterns.
  • Remembers the last pattern that you used when you power it off and returns to it on power on.
  • Supports 75 LEDs per channel (150 total) on Uno and Nano. Much more on Mega etc. If you need more LEDs, on something like a nano, see extra info below.
  • Completely open source and hackable. Create your own patterns or use it in whatever you like!

Demo

Click the image below

Youtube video of VU meter in action

Setting up the circuit

If you want to make this on your own, the schematic that I have used is:

Wiring schematic Building this on a breadboard is relatively simple, it could look something like this:

Breadboard image

Installation and code usage

  1. Download this repository and unzip it somewhere. You must rename the unzipped folder Uno_vu_line.
  2. Open the Arduino IDE then open Uno_vu_line.ino
  3. You will need the FastLED and JC_Button libraries installed. In the IDE, go to Tools -> Manage Libraries. Search for FastLED and install the latest version and do the same with JC_Button.
  4. On the Uno_vu_line.ino tab, find the line that says # define N_PIXELS and change the number after it to the number of LEDs you have in each string.
  5. Plug in the Arduino and upload the code in the usual way, ensuring that the correct board type and com port are selected in the Tools menu.

Extra info

  • The more LEDs you have, the more power you will need to provide. Make sure your power source is able to cope.
  • If you need to use longer strips and you are running out of RAM, you can reduce SAMPLES to something less than 60. The lower the number is, the the more flickery the VU will be, but you will be able to use more LEDs
  • If the controller seems to go weird, I've found a quick reflash of the code usually clears it up quickly.
  • This project is for entertainment purposes only and the output is not calibrated in any way.
  • Code is written to run on the Nano / Uno or equivalent. Using an AVR with more SRAM will result in being able to use more LEDs.

Code is based on demos from the FastLED library and code from Cinelights YouTube channel.