Retro wristwatch using a 4 digit bubble display
Left Button: Show Date (DD.MM), left Button again: show year Right Button: Show Time (HH MM), right Button again: show seconds
Setting Time: First push the right Button, time is shown, now push right Button longer ~2s Left digit is flashing, right button will count up, left button will select the next digit. Push left Button long to save the time, push right button long to cancel
Setting Date: First push the left Button, date is shown, now push right Button longer ~2s. Day is flashing, right button will count up, left button will select month. Push left Button long to save the time, push right button long to cancel
Setting Year: First push the left Button, date is shown, now push left Button again, Year is shown. Push the right button longer ~2s. Lower two digits are flashing, right button will count up, left button will select upper two digits. Push left Button long to save the time, push right button long to cancel
The PCB is made using Target, a German PCB software. Detail see in the pcb folder.
The Software is written using Atmel Studio 7 in C++. I'm not using any library, its coded "bare metal". Compiling as Debug will use the UART to print debug messages and allow a few commands. In Release mode the UART is not used. Some source files are an early version of my AvrLibrary.
The case is designed using OpenSCAD. It is printed on my RF1000 Printer using blue Filament.
