Y24-105 Tube Rack Defrosting Bed Verification

[yoldas]

User story
As PSD, we would like to support bed verification using the versioned tube rack model proposed in Reuse of TubeRacks document. LRC PBMC Cryostor tube rack is a source labware In this bed verification.

Who are the primary contacts for this story
Abdullah, Katy, Andrew

Who is the nominated tester for UAT
TBD

Acceptance criteria
To be considered successful the solution must allow:

• DPL-1092 acceptance criteria using the TubeRack model, not as a Plate.

Dependencies
This story is blocked by the following dependencies:

• DPL-1011 Re-use of tube racks #1482

References
This story has a non-blocking relationship with:

• DPL-914 Create tube rack containing banked PBMC tubes #1388
• DPL-1092 Bed verification of the transfer from the LRC PBMC Cryostor tube rack into the LRC PBMC Defrost PBS plate #1577
• Y24-113 Implement (Defrosting) DPL-914 Create tube rack containing banked PBMC tubes using the versioned TubeRack model #1715

Additional context
The versioned tube rack model is researched in DPL-1011 Re-use of tube racks and the model is summarised in the Google Document DPL-1011 Re-use of tube racks

This story is part of re-implementation of DPL-914 Create tube rack containing banked PBMC tubes

Story relationships are shown in the Lucidchart diagram TubeRack Stories .

It is not possible to release the implementation of this story in isolation.

The existing story does a plate-to-plate bed verification because the source LRC PBMC Cryostor tube rack is represented as a plate. DPL-1092 Bed verification of the transfer from the LRC PBMC Cryostor tube rack into the LRC PBMC Defrost PBS plate

[KatyTaylor]

copy paste error - "we would like to support Limber tube rack scan file uploads for existing tubes"