README.md

remoteio

A Raspberry Pi GPIO remote control based on gpiozero

https://github.com/gpiozero/gpiozero

Server (remote Raspberry Pi)

Use this all-in-one command to install remoteio as deamon on port 8509. The server can be updated with this command.

bash -c "$(wget -qLO - https://github.com/schech1/remoteio/raw/master/install.sh)"

Using pip

pip install remoteio

When you want to create the server by yourself, you can install the library via pip and use the examples below, for server- and client usage.

Server usage

Start a remote server on port 1234. If no port is specified default port 8509 will be used

from remoteio import run_server

if __name__ == "__main__":
    run_server(port=1234)

Client usage

from remoteio import RemoteServer

if __name__ == "__main__":
    server_ip = "192.168.1.38"
    server_port = 1234

    remote_server = RemoteServer(server_ip, server_port)
    remote_pin = remote_server.pin(7, 'b')
    remote_pin.on(time_ms=2000) # (Optional) Time until switch off
    remote_pin.blink() # Blink LED
    remote_pin.pulse() # Pulse LED
    remote_pin.off()
    remote_server.close()

Use Board numbering

remote_pin = remote_server.pin(7, 'b') # Use physical board numbering

Use GPIO numbering

remote_pin = remote_server.pin(4, 'g') # Use GPIO numbering (e.g. GPIO4)