tplink-smarthome-commands.txt

TP-Link Smart Home Protocol Command List
========================================
(for TP-Link HS100 and HS110)

System Commands
========================================
Get System Info (Software & Hardware Versions, MAC, deviceID, hwID etc.)
{"system":{"get_sysinfo":null}}

Reboot
{"system":{"reboot":{"delay":1}}}

Reset (To Factory Settings)
{"system":{"reset":{"delay":1}}}

Turn On
{"system":{"set_relay_state":{"state":1}}}

Turn Off
{"system":{"set_relay_state":{"state":0}}}

Turn Off Device LED (Night mode)
{"system":{"set_led_off":{"off":1}}}

Set Device Alias
{"system":{"set_dev_alias":{"alias":"supercool plug"}}}

Set MAC Address
{"system":{"set_mac_addr":{"mac":"50-C7-BF-01-02-03"}}}

Set Device ID
{"system":{"set_device_id":{"deviceId":"0123456789ABCDEF0123456789ABCDEF01234567"}}}

Set Hardware ID
{"system":{"set_hw_id":{"hwId":"0123456789ABCDEF0123456789ABCDEF"}}}

Set Location
{"system":{"set_dev_location":{"longitude":6.9582814,"latitude":50.9412784}}}

Perform uBoot Bootloader Check
{"system":{"test_check_uboot":null}}

Get Device Icon
{"system":{"get_dev_icon":null}}

Set Device Icon
{"system":{"set_dev_icon":{"icon":"xxxx","hash":"ABCD"}}}

Set Test Mode (command only accepted coming from IP 192.168.1.100)
{"system":{"set_test_mode":{"enable":1}}}

Download Firmware from URL
{"system":{"download_firmware":{"url":"http://...."}}}

Get Download State
{"system":{"get_download_state":{}}}

Flash Downloaded Firmware
{"system":{"flash_firmware":{}}}

Check Config
{"system":{"check_new_config":null}}


WLAN Commands
========================================
Scan for list of available APs
{"netif":{"get_scaninfo":{"refresh":1}}}

Connect to AP with given SSID and Password
{"netif":{"set_stainfo":{"ssid":"WiFi","password":"secret","key_type":3}}}


Cloud Commands
========================================
Get Cloud Info (Server, Username, Connection Status)
{"cnCloud":{"get_info":null}}

Get Firmware List from Cloud Server
{"cnCloud":{"get_intl_fw_list":{}}}

Set Server URL
{"cnCloud":{"set_server_url":{"server":"devs.tplinkcloud.com"}}}

Connect with Cloud username & Password
{"cnCloud":{"bind":{"username":"your@email.com", "password":"secret"}}}

Unregister Device from Cloud Account
{"cnCloud":{"unbind":null}}


Time Commands
========================================
Get Time
{"time":{"get_time":null}}

Get Timezone
{"time":{"get_timezone":null}}

Set Timezone
{"time":{"set_timezone":{"year":2016,"month":1,"mday":1,"hour":10,"min":10,"sec":10,"index":42}}}


EMeter Energy Usage Statistics Commands
(for TP-Link HS110)
========================================
Get Realtime Current and Voltage Reading
{"emeter":{"get_realtime":{}}}

Get EMeter VGain and IGain Settings
{"emeter":{"get_vgain_igain":{}}}

Set EMeter VGain and Igain
{"emeter":{"set_vgain_igain":{"vgain":13462,"igain":16835}}}

Start EMeter Calibration
{"emeter":{"start_calibration":{"vtarget":13462,"itarget":16835}}}

Get Daily Statistic for given Month
{"emeter":{"get_daystat":{"month":1,"year":2016}}}

Get Montly Statistic for given Year
{"emeter":{""get_monthstat":{"year":2016}}}

Erase All EMeter Statistics
{"emeter":{"erase_emeter_stat":null}}


Schedule Commands
(action to perform regularly on given weekdays)
========================================
Get Next Scheduled Action
{"schedule":{"get_next_action":null}}

Get Schedule Rules List
{"schedule":{"get_rules":null}}

Add New Schedule Rule
{"schedule":{"add_rule":{"stime_opt":0,"wday":[1,0,0,1,1,0,0],"smin":1014,"enable":1,"repeat":1,"etime_opt":-1,"name":"lights on","eact":-1,"month":0,"sact":1,"year":0,"longitude":0,"day":0,"force":0,"latitude":0,"emin":0},"set_overall_enable":{"enable":1}}}

Edit Schedule Rule with given ID
{"schedule":{"edit_rule":{"stime_opt":0,"wday":[1,0,0,1,1,0,0],"smin":1014,"enable":1,"repeat":1,"etime_opt":-1,"id":"4B44932DFC09780B554A740BC1798CBC","name":"lights on","eact":-1,"month":0,"sact":1,"year":0,"longitude":0,"day":0,"force":0,"latitude":0,"emin":0}}}

Delete Schedule Rule with given ID
{"schedule":{"delete_rule":{"id":"4B44932DFC09780B554A740BC1798CBC"}}}

Delete All Schedule Rules and Erase Statistics
{"schedule":{"delete_all_rules":null,"erase_runtime_stat":null}}


Countdown Rule Commands
(action to perform after number of seconds)
========================================
Get Rule (only one allowed)
{"count_down":{"get_rules":null}}

Add New Countdown Rule
{"count_down":{"add_rule":{"enable":1,"delay":1800,"act":1,"name":"turn on"}}}

Edit Countdown Rule with given ID
{"count_down":{"edit_rule":{"enable":1,"id":"7C90311A1CD3227F25C6001D88F7FC13","delay":1800,"act":1,"name":"turn on"}}}

Delete Countdown Rule with given ID
{"count_down":{"delete_rule":{"id":"7C90311A1CD3227F25C6001D88F7FC13"}}}

Delete All Coundown Rules
{"count_down":{"delete_all_rules":null}}


Anti-Theft Rule Commands (aka Away Mode) 
(period of time during which device will be randomly turned on and off to deter thieves) 
========================================
Get Anti-Theft Rules List
{"anti_theft":{"get_rules":null}}

Add New Anti-Theft Rule
{"anti_theft":{"add_rule":{"stime_opt":0,"wday":[0,0,0,1,0,1,0],"smin":987,"enable":1,"frequency":5,"repeat":1,"etime_opt":0,"duration":2,"name":"test","lastfor":1,"month":0,"year":0,"longitude":0,"day":0,"latitude":0,"force":0,"emin":1047},"set_overall_enable":1}}

Edit Anti-Theft Rule with given ID
{"anti_theft":{"edit_rule":{"stime_opt":0,"wday":[0,0,0,1,0,1,0],"smin":987,"enable":1,"frequency":5,"repeat":1,"etime_opt":0,"id":"E36B1F4466B135C1FD481F0B4BFC9C30","duration":2,"name":"test","lastfor":1,"month":0,"year":0,"longitude":0,"day":0,"latitude":0,"force":0,"emin":1047},"set_overall_enable":1}}

Delete Anti-Theft Rule with given ID
{"anti_theft":{"delete_rule":{"id":"E36B1F4466B135C1FD481F0B4BFC9C30"}}}

Delete All Anti-Theft Rules
"anti_theft":{"delete_all_rules":null}}