You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have some questions about how to make the PoC run on my RPi. I have seen a related issue. I have followed the advice in downgrading the Broadcom driver, but I fear I have missed a step or found the wrong firmware.
The output from running the Python script says my firmware is BCM43430A1. I have seen in other places the advice to run this command to see if the firmware loads properly dmesg | grep -i bluetooth but mine doesn't output any information about the firmware
The full output of running the script is this:
[*] Connected to hci0
[*] Chip identifier: 0x2209 (001.002.009)
[*] Using fw_0x2209.py
[*] Loaded firmware information for BCM43430A1.
[*] Try to enable debugging on H4 (warning if not supported)...
[*] Installing patch which ensures that send_LMP_encryption_key_size_req is always len=1!
[!] _sendThreadFunc: No response from the firmware.
[!] sendHciCommand: waiting for response timed out!
[!] readMem: No response to readRAM HCI command! (read_addr=310204, len=20)
How can I solve this issue? I can provide any additional info as needed, including the link where I found the firmware. Thanks!
The text was updated successfully, but these errors were encountered:
Hello, I hope this is the right place to ask.
I have some questions about how to make the PoC run on my RPi. I have seen a related issue. I have followed the advice in downgrading the Broadcom driver, but I fear I have missed a step or found the wrong firmware.
The output from running the Python script says my firmware is BCM43430A1. I have seen in other places the advice to run this command to see if the firmware loads properly
dmesg | grep -i bluetooth
but mine doesn't output any information about the firmwareThe full output of running the script is this:
How can I solve this issue? I can provide any additional info as needed, including the link where I found the firmware. Thanks!
The text was updated successfully, but these errors were encountered: