Skip to content

Latest commit

 

History

History
44 lines (32 loc) · 850 Bytes

README.md

File metadata and controls

44 lines (32 loc) · 850 Bytes
Raw

What

My lousy attempt at creating something in Rust for an embedded device with a Cortex M3 CPU.

The board I'm using is the STM32 Nucleo F103RB (http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-nucleo/nucleo-f103rb.html).

Build

xargo build --target thumbv7m-none-eabi

Install on target

# openocd -f interface/stlink-v2-1.cfg -f board/st_nucleo_f103rb.cfg -f flash_image.ocd

Run

Via OpenOCD:

# openocd -f interface/stlink-v2-1.cfg -f board/st_nucleo_f103rb.cfg -f attach.ocd

And in another terminal:

$ telnet localhost 4444
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Open On-Chip Debugger
> resume