Bump coverage from 4.5.4 to 6.5.0

[dependabot]

Bumps coverage from 4.5.4 to 6.5.0.

Release notes

Sourced from coverage's releases.

coverage-5.6b1

• Third-party packages are now ignored in coverage reporting. This solves a few problems:
  • Coverage will no longer report about other people’s code (issue 876). This is true even when using --source=. with a venv in the current directory.
  • Coverage will no longer generate “Already imported a file that will be measured” warnings about coverage itself (issue 905).
• The HTML report uses j/k to move up and down among the highlighted chunks of code. They used to highlight the current chunk, but 5.0 broke that behavior. Now the highlighting is working again.
• The JSON report now includes percent_covered_display, a string with the total percentage, rounded to the same number of decimal places as the other reports’ totals.

coverage-5.5

• coverage combine has a new option, --keep to keep the original data files after combining them. The default is still to delete the files after they have been combined. This was requested in issue 1108 and implemented in pull request 1110. Thanks, Éric Larivière.
• When reporting missing branches in coverage report, branches aren’t reported that jump to missing lines. This adds to the long-standing behavior of not reporting branches from missing lines. Now branches are only reported if both the source and destination lines are executed. Closes both issue 1065 and issue 955.
• Minor improvements to the HTML report:
  • The state of the line visibility selector buttons is saved in local storage so you don’t have to fiddle with them so often, fixing issue 1123.
  • It has a little more room for line numbers so that 4-digit numbers work well, fixing issue 1124.
• Improved the error message when combining line and branch data, so that users will be more likely to understand what’s happening, closing issue 803.

coverage-5.4

• The text report produced by coverage report now always outputs a TOTAL line, even if only one Python file is reported. This makes regex parsing of the output easier. Thanks, Judson Neer. This had been requested a number of times (issue 1086, issue 922, issue 732).
• The skip_covered and skip_empty settings in the configuration file can now be specified in the [html] section, so that text reports and HTML reports can use separate settings. The HTML report will still use the [report] settings if there isn’t a value in the [html] section. Closes issue 1090.
• Combining files on Windows across drives now works properly, fixing issue 577. Thanks, Valentin Lab.
• Fix an obscure warning from deep in the _decimal module, as reported in issue 1084.
• Update to support Python 3.10 alphas in progress, including PEP 626: Precise line numbers for debugging and other tools.

coverage-5.3.1

• When using --source on a large source tree, v5.x was slower than previous versions. This performance regression is now fixed, closing issue 1037.
• Mysterious SQLite errors can happen on PyPy, as reported in issue 1010. An immediate retry seems to fix the problem, although it is an unsatisfying solution.
• The HTML report now saves the sort order in a more widely supported way, fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).
• The HTML report pages now have a Sleepy Snake favicon.
• Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).
• Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

coverage-5.3

• The source setting has always been interpreted as either a file path or a module, depending on which existed. If both interpretations were valid, it was assumed to be a file path. The new source_pkgs setting can be used to name a package to disambiguate this case. Thanks, Thomas Grainger. Fixes issue 268.
• If a plugin was disabled due to an exception, we used to still try to record its information, causing an exception, as reported in issue 1011. This is now fixed.

coverage-5.2.1

• The dark mode HTML report still used light colors for the context listing, making them unreadable (issue 1009). This is now fixed.
• The time stamp on the HTML report now includes the time zone. Thanks, Xie Yanbo (pull request 960).

coverage-5.2

• The HTML report has been redesigned by Vince Salvino. There is now a dark mode, the code text is larger, and system sans serif fonts are used, in addition to other small changes (issue 858 and pull request 931).
• The coverage report and coverage html commands now accept a --precision option to control the number of decimal points displayed. Thanks, Teake Nutma (pull request 982).
• The coverage report and coverage html commands now accept a --no-skip-covered option to negate --skip-covered. Thanks, Anthony Sottile (issue 779 and pull request 932).
• The --skip-empty option is now available for the XML report, closing issue 976.
• The coverage report command now accepts a --sort option to specify how to sort the results. Thanks, Jerin Peter George (pull request 1005).
• If coverage fails due to the coverage total not reaching the --fail-under value, it will now print a message making the condition clear. Thanks, Naveen Yadav (pull request 977).
• TOML configuration files with non-ASCII characters would cause errors on Windows (issue 990). This is now fixed.
• The output of --debug=trace now includes information about how the --source option is being interpreted, and the module names being considered.

coverage-5.1

• The JSON report now includes counts of covered and missing branches. Thanks, Salvatore Zagaria.

... (truncated)

Changelog

Sourced from coverage's changelog.

Version 6.5.0 — 2022-09-29

• The JSON report now includes details of which branches were taken, and which are missing for each file. Thanks, Christoph Blessing (pull 1438). Closes issue 1425.

• Starting with coverage.py 6.2, class statements were marked as a branch. This wasn't right, and has been reverted, fixing issue 1449_. Note this will very slightly reduce your coverage total if you are measuring branch coverage.

• Packaging is now compliant with PEP 517, closing issue 1395.

• A new debug option --debug=pathmap shows details of the remapping of paths that happens during combine due to the [paths] setting.

• Fix an internal problem with caching of invalid Python parsing. Found by OSS-Fuzz, fixing their bug 50381_.

.. _bug 50381: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=50381 .. _PEP 517: https://peps.python.org/pep-0517/ .. _issue 1395: nedbat/coveragepy#1395 .. _issue 1425: nedbat/coveragepy#1425 .. _pull 1438: nedbat/coveragepy#1438 .. _issue 1449: nedbat/coveragepy#1449

.. _changes_6-4-4:

Version 6.4.4 — 2022-08-16

• Wheels are now provided for Python 3.11.

.. _changes_6-4-3:

Version 6.4.3 — 2022-08-06

• Fix a failure when combining data files if the file names contained glob-like patterns (pull 1405_). Thanks, Michael Krebs and Benjamin Schubert.

• Fix a messaging failure when combining Windows data files on a different drive than the current directory. (pull 1430, fixing issue 1428). Thanks, Lorenzo Micò.

• Fix path calculations when running in the root directory, as you might do in

... (truncated)

Commits

• 0ac2453 docs: sample html report
• 0954c85 build: prep for 6.5.0
• 95195b1 docs: changelog for json report branch details
• 789f175 fix: keep negative arc values
• aabc540 feat: include branches taken and missed in JSON report. #1425
• a59fc44 docs: minor tweaks to db docs
• d296083 docs: add a note to the class-branch change
• 7f07df6 chore: make upgrade
• 6bc29a9 build: use the badge action coloring
• fd36918 fix: class statements shouldn't be branches. #1449
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[codecov]

Codecov Report

Base: 100.00% // Head: 100.00% // No change to project coverage 👍

Coverage data is based on head (e1a84de) compared to base (9c97424).
Patch has no changes to coverable lines.

Additional details and impacted files

@@            Coverage Diff            @@
##              main       #51   +/-   ##
=========================================
  Coverage   100.00%   100.00%           
=========================================
  Files            4         4           
  Lines          151       151           
=========================================
  Hits           151       151           

Help us with your feedback. Take ten seconds to tell us how you rate us. Have a feature suggestion? Share it here.

☔ View full report at Codecov.
📢 Do you have feedback about the report comment? Let us know in this issue.

[dependabot]

Superseded by #58.