Graph y axis scaling

[TremotinoVolante]

Hi sicreative,

I discovered this app and find it very useful for charging the battery to about 80% when I use the MacBook on power supply only... Thanks for sharing this app with us!

I also would like to use the the app every few month to get a discharge and charge curve of the battery unfortunately the x axis (time) is set to 20 min which is too short and the y axis on the right is set to 8-16V which just give me a straight line of the voltage plot. For me, the y axis scaling battery voltage would be more representative if it would be between 10 and 14V since 34,2V is the maximum and 33,5V should be the minimum.
Also the Voltage line in the plot is very thick.
As you can see on the screen shot the Voltage line is very thick and the changes are very little compare the the Watt plot, which scale better. Also the power plot is thinner. For showing a charging or discharging curve of the battery a much longer time stamp like at least 2 hours would be needed.

I found out in the source code how to change the values for my needs. The problem is that I could not figure out how to compile the project correctly.

from readme:

complie smcutil scheme
complie BatteryStatusShow scheme

Could you please provide some more hints or the terminal commands you use to compile the project?
Do you use other dependencies or software to compile the project?
Is there something similar to a Makefile (like in c) to compile the project?

Any help regarding this "issue" would really help a lot.

I'm using Version 1.5.5 (17)