bin2tap.py converts a binary file produced by an assembler (see supportedAssemblers
) into a TAP file that can be loaded into an emulator. For example:
$ bin2tap.py game.bin
will create a file called game.tap. By default, the origin address (the address of the first byte of code or data), the start address (the first byte of code to run) and the stack pointer are set to 65536 minus the length of game.bin. These defaults can be changed by passing options to bin2tap.py. Run it with no arguments to see the list of available options:
Usage: bin2tap.py [options] FILE.bin
Convert a binary snapshot file into a TAP file.
Options:
-o ORG Set the origin (default: 65536 - length of FILE.bin)
-s START Set the start address to JP to (default: ORG)
-p STACK Set the stack pointer (default: ORG)
-t TAPFILE Set the TAP filename (default: FILE.tap)
Note that the ROM tape loading routine at 1366 ($0556) and the load routine used by bin2tap.py together require 14 bytes for stack operations, and so STACK must be at least 16384+14=16398 ($400E). This means that if ORG is less than 16398, you should use the -p
option to set the stack pointer to something appropriate. If the main data block (derived from game.bin) overlaps any of the last four bytes of the stack, bin2tap.py will replace those bytes with the values required by the tape loading routine for correct operation upon returning. Stack operations will overwrite the bytes in the address range STACK-14 to STACK-1 inclusive, so those addresses should not be used to store essential code or data.
Version | Changes |
---|---|
1.3.1 | New |
2.2.5 | Added the -p option |
skool2asm.py converts a skool file into an ASM file that can be fed to an assembler (see supportedAssemblers
). For example:
$ skool2asm.py game.skool > game.asm
skool2asm.py supports many options; run it with no arguments to see a list:
Usage: skool2asm.py [options] FILE
Convert a skool file into an ASM file, written to standard output. FILE may
be a regular file, or '-' for standard input.
Options:
-q Be quiet
-w Suppress warnings
-d Use CR+LF to end lines
-t Use tab to indent instructions (default indentation is 2 spaces)
-l Write disassembly in lower case
-u Write disassembly in upper case
-D Write disassembly in decimal
-H Write disassembly in hexadecimal
-i N Set instruction field width to N (default=23)
-f N Apply fixes:
N=0: None (default)
N=1: @ofix only
N=2: @ofix and @bfix
N=3: @ofix, @bfix and @rfix (implies -r)
-c Create default labels for unlabelled instructions
-s Use safe substitutions (@ssub)
-r Use relocatability substitutions too (@rsub) (implies '-f 1')
See asmModesAndDirectives
for a description of the @ssub
and @rsub
substitution modes, and the @ofix
, @bfix
and @rfix
bugfix modes.
Version | Changes |
---|---|
1.1 | Added the -c option |
2.1.1 | Added the -u , -D and -H options |
2.2.2 | Added the ability to read a skool file from standard input |
skool2ctl.py converts a skool file into a control file <controlFiles>
. For example:
$ skool2ctl.py game.skool > game.ctl
In addition to block types and addresses, game.ctl will contain block titles, block descriptions, registers, mid-block comments, block end comments, sub-block types and addresses, instruction-level comments, and some ASM directives <asmDirectives>
.
To list the options supported by skool2ctl.py, run it with no arguments:
Usage: skool2ctl.py [options] FILE
Convert a skool file into a control file, written to standard output. FILE
may be a regular file, or '-' for standard input.
Options:
-w X Write only these elements, where X is one or more of:
b = block types and addresses
t = block titles
d = block descriptions
r = registers
m = mid-block comments and block end comments
s = sub-block types and addresses
c = instruction-level comments
-h Write addresses in hexadecimal format
-a Do not write ASM directives
If you need to preserve any elements that control files do not support (such as data definition entries and ASM block directives), consider using skool2sft.py
to create a skool file template instead.
Version | Changes |
---|---|
1.1 | New |
2.0.6 | Added the -h option |
2.2.2 | Added the ability to read a skool file from standard input |
2.4 | Added the -a option and the ability to preserve some ASM directives |
skool2html.py converts a skool file (and its associated ref files, if any exist) into a browsable disassembly in HTML format.
For example:
$ skool2html.py game.skool
will convert the file game.skool into a bunch of HTML files. If any files named game*.ref (e.g. game.ref, game-bugs.ref, game-pokes.ref and so on) also exist, they will be used to provide further information to the conversion process.
skool2html.py can operate directly on ref files, too. For example:
$ skool2html.py game.ref
In this case, the skool file declared in the ref-Config
section of game.ref will be used; if no skool file is declared in game.ref, game.skool will be used if it exists. In addition, any existing files besides game.ref that are named game*.ref (e.g. game-bugs.ref, game-pokes.ref and so on) will also be used.
If an input file's name ends with '.ref', it will be treated as a ref file; otherwise it will be treated as a skool file.
skool2html.py supports several options; run it with no arguments to see a list:
Usage: skool2html.py [options] FILE [FILE...]
Convert skool files and ref files to HTML. FILE may be a regular file, or '-'
for standard input.
Options:
-V Show SkoolKit version number and exit
-p Show path to skoolkit package directory and exit
-q Be quiet
-t Show timings
-d DIR Write files in this directory (default is '.')
-o Overwrite existing image files
-T THEME Use this CSS theme
-l Write disassembly in lower case
-u Write disassembly in upper case
-D Write disassembly in decimal
-H Write disassembly in hexadecimal
-c S/L Add the line 'L' to the ref file section 'S'; this option may be
used multiple times
-P PAGES Write only these custom pages (when '-w P' is specified); PAGES
should be a comma-separated list of IDs of pages defined in [Page:*]
sections in the ref file(s)
-w X Write only these files, where X is one or more of:
B = Graphic glitches
b = Bugs
c = Changelog
d = Disassembly files
G = Game status buffer
g = Graphics
i = Disassembly index
m = Memory maps
o = Other code
P = Pages defined in the ref file(s)
p = Pokes
t = Trivia
y = Glossary
When skool2html.py is run, it looks for skool files, ref files, CSS files, JavaScript files and font files required by the disassembly in the following directories, in the order listed:
- The directory that contains the skool or ref file named on the command line
- The current working directory
- ./resources
- ~/.skoolkit
- /usr/share/skoolkit
- $PACKAGE_DIR/resources
where $PACKAGE_DIR is the directory in which the skoolkit package is installed (as shown by skool2html.py -p
).
The -T
option sets the CSS theme. For example, if game.ref specifies the CSS files to use thus:
[Paths]
StyleSheet=skoolkit.css;game.css
then:
$ skool2html.py -T dark game.ref
will use skoolkit-dark.css and game-dark.css if they exist, and fall back to skoolkit.css and game.css if they don't.
Version | Changes |
---|---|
1.4 | Added the -V option |
2.1 | Added the -o and -P options |
2.1.1 | Added the -l , -u , -D and -H options |
2.2 | No longer writes the Skool Daze and Back to Skool disassemblies by default; added the -d option |
2.2.2 | Added the ability to read a skool file from standard input |
2.3.1 | Added support for reading multiple ref files per disassembly |
3.0.2 | No longer shows timings by default; added the -t option |
3.1 | Added the -c option |
3.2 | Added ~/.skoolkit to the search path |
3.3.2 | Added $PACKAGE_DIR/resources to the search path; added the -p and -T options |
skool2sft.py converts a skool file into a skool file template <skoolFileTemplates>
. For example:
$ skool2sft.py game.skool > game.sft
To list the options supported by skool2sft.py, run it with no arguments:
Usage: skool2sft.py [options] FILE
Convert a skool file into a skool file template, written to standard output.
FILE may be a regular file, or '-' for standard input.
Options:
-h Write addresses in hexadecimal format
Version | Changes |
---|---|
2.4 | New |
sna2skool.py converts a binary (raw memory) file or a SNA, SZX or Z80 snapshot into a skool file. For example:
$ sna2skool.py game.z80 > game.skool
Now game.skool can be converted into a browsable HTML disassembly using skool2html.py <skool2html.py>
, or into an assembler-ready ASM file using skool2asm.py <skool2asm.py>
.
sna2skool.py supports several options; run it with no arguments to see a list:
Usage: sna2skool.py [options] file
Convert a binary (raw memory) file or a SNA, SZX or Z80 snapshot into a skool
file.
Options:
-c FILE Use FILE as the control file (default is file.ctl)
-T FILE Use FILE as the skool file template (default is file.sft)
-g FILE Generate a control file in FILE
-M FILE Use FILE as a code execution map when generating the control file
-h Write hexadecimal addresses in the generated control file
-H Write hexadecimal addresses and operands in the disassembly
-L Write the disassembly in lower case
-s ADDR Specify the address at which to start disassembling (default=16384)
-o ADDR Specify the origin address of file.bin (default: 65536 - length)
-p PAGE Specify the page (0-7) of a 128K snapshot to map to 49152-65535
-t Show ASCII text in the comment fields
-r Don't add comments that list entry point referrers
-n N Set the max number of bytes per DEFB statement to N (default=8)
-m M Group DEFB blocks by addresses that are divisible by M
-z Write bytes with leading zeroes in DEFB statements
-l L Set the max number of characters per DEFM statement to L (default=66)
The -M
option may be used (in conjunction with the -g
option) to specify a code execution map to use when generating a control file. The supported file formats are:
- Profiles created by the Fuse emulator
- Code execution logs created by the SpecEmu, Spud and Zero emulators
- Map files created by the Z80 emulator
If the file specified by the -M
option is 8192 bytes long, it is assumed to be a Z80 map file; otherwise it is assumed to be in one of the other supported formats.
Version | Changes |
---|---|
1.0.4 | Added the -g and -s options |
1.0.5 | Added the -t option |
2.0 | Added the -n , -m and -z options |
2.0.1 | Added the -o , -r and -l options, and the ability to read binary files |
2.0.6 | Added the -h option |
2.1 | Added the -H option |
2.1.2 | Added the -L option |
2.4 | Added the -T option |
3.2 | Added the -p option, and the ability to read SZX snapshots and 128K Z80 snapshots |
3.3 | Added the -M option, along with support for code execution maps produced by Fuse, SpecEmu, Spud, Zero and Z80; added the ability to read 128K SNA snapshots |