This is a fork & remix of rogerlz/Doron-Velta
- Z got bigger usable space is now ~320mm
- Motors moved to bottom to lower CoG
| Category | Part | Qty | Notes |
|---|---|---|---|
| Frame | HFSB5-2020-650-TPW | 3 | |
| Frame | HFSB5-2040-235 | 6 | |
| Axis | MGN9H 550mm | 3 | |
| Axis | GT2 Belt 9mm | ~3 meters | |
| Axis | GT2 20T Idler 9mm | 3 | |
| Axis | Nema17 Steppers | 3 | Optional: LDO G2Z Kit |
| Axis | 210mm Fisheye Rods | 6 | I used: FLSUN Q5 arms Aliexpress |
| Bed | 200mm x 5mm Alu Bed | 1 | MandalaRoseWorks |
| Bed | 200mm PEI Sheet | 1 | Aliexpress |
| Electronics | Kenoovo 170mm 200W AC Heater | 1 | Keenovo |
| Electronics | UHP-200-24 | 1 | |
| Electronics | SSR | 1 | |
| Electronics | MCU with 4+ drivers | 1 | Mounts for: SKR Pico and M5P |
| Electronics | Omron D2F-L microswitch | 3 | x4 if using Klicky |
| Toolhead | Any hotend supported by Mini SB | 1 | I used: Dragon |
| Toolhead | 3010 Axial fan | 1 | |
| Toolhead | 3010 Blower fan | 2 | |
| Extruder | G2SA / Sherpa Mini | 1 | |
| Screws | Yes | Many |