New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Seagate Ironwolf ST4000NE0025 is not in smartd database #10
Comments
This only affects attribute naming and raw value print format. For HDDs the defaults are sufficient in most cases. Please provide sample |
hello, ` === START OF INFORMATION SECTION === === START OF READ SMART DATA SECTION === General SMART Values: SMART Attributes Data Structure revision number: 10 General Purpose Log Directory Version 1 SMART Extended Comprehensive Error Log Version: 1 (5 sectors) SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SCT Status Version: 3 SCT Temperature History Version: 2 Index Estimated Time Temperature Celsius SCT Error Recovery Control: Device Statistics (GP Log 0x04) SATA Phy Event Counters (GP Log 0x11) |
Added in r4868, r4869 and included in smartmontools 7.0. |
Seem the new Seagate Ironwolf is not in smartd database.
Wonder if this might cause smatmontools reading error ?
smartd[519]: Device: /dev/sde, type changed from 'scsi' to 'sat' smartd[519]: Device: /dev/sde [SAT], opened smartd[519]: Device: /dev/sde [SAT], ST4000NE0025-2EW107, S/N:redacted, WWN:5-000c50-0af6717a5, FW:EN02, 4.00 TB smartd[519]: Device: /dev/sde [SAT], not found in smartd database.
The text was updated successfully, but these errors were encountered: