GpioExample.py

# A easy Gpio library example for the Udoo Neo created by David Smerkous
# The current things this library can do

# digitalWriting/Reading - Soon to come PWM

from neo import Gpio # import Gpio library
from time import sleep # import sleep to wait for blinks

neo = Gpio() #create new Neo object

pinTwo = 2 #pin to use
pinThree = 3

neo.pinMode(pinTwo, neo.OUTPUT)# Use innerbank pin 2 and set it as output either 0 (neo.INPUT) or 1 (neo.OUTPUT)
neo.pinMode(pinThree, neo.INPUT)# Use pin three(innerbank) and read set state to read

#Blink example
for a in range(0, 5): #Do for five times
	neo.digitalWrite(pinTwo,neo.HIGH) #write high value to pin
	sleep(1)# wait one second
	neo.digitalWrite(pinTwo,neo.LOW) #write low value to pin
	sleep(1)# wait one second

#Read pin
print "Current pin("+str(pinThree)+") state is: "+str(neo.digitalRead(pinThree)) # read current value of pinThree(To succesfully read a pin it must be either pulled to ground or 3.3v, a non connected wire will not work)