Skip to content

Latest commit

 

History

History
96 lines (63 loc) · 2.56 KB

hardware.rst

File metadata and controls

96 lines (63 loc) · 2.56 KB

Interacting with Hardware

SoftLayer.CLI.hardware.bandwidth:cli

SoftLayer.CLI.hardware.cancel_reasons:cli

SoftLayer.CLI.hardware.cancel:cli

SoftLayer.CLI.hardware.create_options:cli

SoftLayer.CLI.hardware.create:cli

Provides some basic functionality to order a server. slcli order has a more full featured method of ordering servers. This command only supports the FAST_PROVISION type.

SoftLayer.CLI.hardware.credentials:cli

SoftLayer.CLI.hardware.detail:cli

SoftLayer.CLI.hardware.edit:cli

When setting port speed, use "-1" to indicate best possible configuration. Using 10/100/1000/10000 on a server with a redundant interface may result the interface entering a degraded state. See setPublicNetworkInterfaceSpeed for more information.

SoftLayer.CLI.hardware.list:cli

SoftLayer.CLI.hardware.power:power_cycle

SoftLayer.CLI.hardware.power:power_off

SoftLayer.CLI.hardware.power:power_on

SoftLayer.CLI.hardware.power:reboot

SoftLayer.CLI.hardware.reload:cli

SoftLayer.CLI.hardware.power:rescue

SoftLayer.CLI.hardware.reflash_firmware:cli

Reflash here means the current version of the firmware running on your server will be re-flashed onto the selected hardware. This does require a reboot. See slcli hw update-firmware if you want the newest version.

SoftLayer.CLI.hardware.update_firmware:cli

This function updates the firmware of a server. If already at the latest version, no software is installed.

SoftLayer.CLI.hardware.toggle_ipmi:cli

SoftLayer.CLI.hardware.ready:cli