changelog.md

New (modules)

• 22.04.2021: Introduced refactoring-branch
• xx.05.2021: Fixing/stabilizing code
• 08.06.2021: Added global support for PA/HP-enable
• 15.06.2021: Added interrupt-handling to PCA9555
• 22.06.2021: Changed ESP32's partition-layout in order to provider bigger NVS-storage
• 30.06.2021: Added directive CACHED_PLAYLIST_ENABLE for faster playlist-generation
• 08.07.2021: Added support to monitor WiFi's RSSI
• 09.07.2021: Making branch refactoring the the master
• 09.07.2021: Making master the new branch old (not maintained any longer!)
• 13.07.2021: Adding OTA-support via webGUI
• 23.07.2021: Adding new playmode: from local .m3u-file (files or webstreams)
• 30.09.2021: Added feature PAUSE_WHEN_RFID_REMOVED for RC522 after having it already for PN5180 (thanks @elmar-ops for contribution)
• 27.10.2021: Added feature SAVE_PLAYPOS_BEFORE_SHUTDOWN. When enabled last playposition for audiobook is saved when shutdown is initiated. Without having this feature enabled, it's necessary to press pause first, in order to do this manually.
• 28.10.2021: Added feature SAVE_PLAYPOS_WHEN_RFID_CHANGE. When enabled last playposition for audiobook is saved when new RFID-tag is applied. Without having this feature enabled, it's necessary to press pause first, in order to do this manually.
• 13.11.2021: Command CMD_TELL_IP_ADDRESS can now be assigned to buttons in order to get information about the currently used IP-address via speech.
• 29.01.2022: Directive INVERT_POWER can now be used it invert power-GPIO. And port-expander can now be used for power.
• 28.02.2022: Directive MEASURE_BATTERY_MAX17055 added. Provides support for MAX17055.
• 31.08.2022: Directive DONT_ACCEPT_SAME_RFID_TWICE added. Blocks unwanted reapplies of the same rfid-tag (in case it's not a modification-card or rfid-tag is unknown in NVS). .

Old (monolithic main.cpp)

• 11.07.2020: Added support for reversed Neopixel addressing.
• 09.10.2020: mqttUser / mqttPassword can now be configured via webgui.
• 16.10.2020: Added English as supported lanuage.
• 01.11.2020: Added directive SD_NOT_MANDATORY_ENABLE: for debugging puposes SD can be bypassed at boot.
• 17.11.2020: Introduced a distinct volume for headphone for optional headphone-PCB.
• 20.11.2020: Added directive MEASURE_BATTERY_VOLTAGE: monitoring battery's voltage is now supported.
• 25.11.2020: WiFi can now be enabled/disabled instantly by pressing two buttons.
• 28.11.2020: Battery's voltage can now be visualized by Neopixel by short-press of rotary encoder's button.
• 28.11.2020: Added directive PLAY_LAST_RFID_AFTER_REBOOT: ESPuino will recall the last RFID played after reboot.
• 05.12.2020: Added filebrowser to webgui (thanks @mariolukas for contribution!)
• 05.12.2020: Moved all user-relevant settings to src/settings.h
• 06.12.2020: Added PCB for Wemos Lolin32
• 08.12.2020: Reworked MQTT-timeout-Management
• 09.12.2020: mDNS-feature added. If ESPuino's name is "ESPuino", you can use ESPuino.local instead it's of IP-address.
• 11.12.2020: Revised GUI-design (thanks @mariolukas for contribution!) + (untested) PCB added for Wemos Lolin D32 + gerberfiles for headphone-PCB
• 18.12.2020: Added SD-MMC 1 Bit-mode (SD_MMC_1BIT_MODE). This mode needs one GPIO less and provides almost doubled speed (compared to SPI) for FTP-transfers (thanks @tueddy for contribution!)
• 18.12.2020: Added support for RFID-reader PN5180 (RFID_READER_TYPE_PN5180). PN5180 has better RFID-range/sensitivity and can read ISO-15693 / iCode SLIX2-tags aka 'Tonies' (thanks @tueddy for contribution!)
• 20.12.2020: Due to memory-issues with webstreams, FTP needs to be activated by pressing pause+next-button now
  More to come...
• 23.12.2020: User-config is now split into general part (settings.h) and develboard-specific part (e.g. settings-lolin32.h)
• 13.01.2021: Added fileexlorer to webgui (thanks @grch87 for contribution!). Now files and directories can be renamed, uploaded and deleted via webgui.
• 17.01.2021: Added directive STATIC_IP_ENABLE: (optional) static IPv4-configuration
• 18.01.2021: Added directive PN5180_ENABLE_LPCD: awake from deepsleep with PN5180 is now possible (but needs another GPIO)
• 25.01.2021: Added directive USE_LAST_VOLUME_AFTER_REBOOT: Remembers volume used at last shutdown after reboot. This overwrites initial volume from GUI.
• 28.01.2021: Removed cached RFID-filebrowser and replaced by realtime-browser
• 01.02.2021: Introducing PCB: Lolin32 with SD_MMC + PN5180
• 06.02.2021: German umlauts now supported. When uploading via FTP make sure to change charset to CP437.
• 09.02.2021: Added support for bluetooth-sink (a2dp). Thanks @grch87 & @elmar-ops for providing this feature!
• 25.02.2021: Added support for dynamic button-layout. Rotary-encoder is now optional and up to five buttons can be used.
• 25.02.2021: Actions can be freely assigned to buttons (multi-button, single-button (short), single-button (long))
• 25.02.2021: Added support for webcontrol: basic control (volume, play/pause, next, previous, first, last track) can now be controlled via webgui.
• 25.02.2021: Added support for .m4a and .wav-files.
• 26.02.2021: Shutdown via webgui is now available.
• 05.03.2021: Added support for remote control via infrared. Make sure to enable IR_CONTROL_ENABLE to use this feature and don't forget to assign corresponding rc-commands of your remote control to actions.
• 19.03.2021: Added support for port-expander PCA9555. Can be used for everything, that is "button-like": buttons, headphone-detect, PN5180.IRQ.
• 28.03.2021: Added support for fileseek. With commands CMD_SEEK_FORWARDS and CMD_SEEK_BACKWARDS it's possible to jump a number of seconds defined in jumpOffset.
• 30.03.2021: Added support for stereo/mono via PLAY_MONO_SPEAKER. If active, mono is used while headphones remain stereo (if HEADPHONE_ADJUST_ENABLE is active).
• no more updates will follow!