Skip to content

Latest commit

 

History

History
52 lines (36 loc) · 2.21 KB

README.md

File metadata and controls

52 lines (36 loc) · 2.21 KB
Raw

Status Bootnode

This folder contains setup for running your own Status Bootnode. It uses Systemd for managing the Status Bootnode service.

The steps it takes are:

  • Builds bootnode
  • Generates & saves a private key
  • Generates systemd service
  • Starts the service

Usage

To simply configure and start the service run make.

In order to manage the new statusd service you use other Makefile targets:

  • make info - Info about service
  • make enode - Get enode address
  • make start - Start the service
  • make stop - Stop the service
  • make status - Check service status
  • make enable - Enable the service
  • make disable - Disable the service
  • make logs - Read the service logs
  • make clean - Stop service and remove it

All the above commands are just wrappers around the systemctl and journalctl commands.

Settings

All settings are passed through environment variables:

  • SERVICE_NAME - Name of the systemd service to be created. (Default: statusd)
  • PUBLIC_IP - Your IP visible from the internet and advertised by the Bootnode.
  • LISTEN_PORT - Bootnode TCP & UDP port, by default it's 30301 but you might want to use 443.
  • DATA_PATH - Location of Bootnode storage and keys. (Default: /var/tmp/status-go-boot)
  • KEY_PATH - Location of Bootnode private key file. (Default: /var/tmp/status-go-boot/nodekey)
  • LOG_LEVEL - Set level of log messages to show. (Values:0-9, Default: 3)`

System Service

By default this Makefile configures the Bootnode as a systemd user service. This is done to simplify the proces and remove the need for sudo. The disadvantage of this solution is that the service is stopped when the user logs out.

In order to make your service a system service use sudo make.

Known Issues

  • No journal files were opened due to insufficient permissions. from systemctl
    • To see logs of a user systemd service you need to be a member of systemd-journal group.
    • Use: bash usermod -a -G systemd-journal ${USER}