Makefile.in

# $Id: Makefile.in,v 1.4 2002/11/05 12:44:36 ianedwards Exp $
# @(#)Makefile	1.23 05 Jun 1995 (UKC)

# -----------------------------------------------------------------------------
#  Top level makefile for ups 
# -----------------------------------------------------------------------------

SHELL		= /bin/sh
@SET_MAKE@

srcdir		= @srcdir@
topdir		= @top_srcdir@
VPATH		= @srcdir@

CC		= @CC@
CPP		= @CPP@

# -----------------------------------------------------------------------------
# You may want to edit some of the following variables.

# Where to install the programs and manual page
#
prefix		= @prefix@
exec_prefix	= @exec_prefix@
BINDIR		= ${DESTDIR}@bindir@
MANDIR		= ${DESTDIR}@mandir@/man${MANSUFFIX}
INCDIR		= ${DESTDIR}@includedir@

# The suffix to use for the manual page
#
MANSUFFIX	= 1

# Specify mode/owner of installed files
#
MANPAGE_OWNER	= 
BINARY_OWNER	=
HEADER_OWNER	=

# The directory where X include files live.
#
X11_INC		= @X_CFLAGS@

# The arguments to @CC@ needed to link against the Xlib library.
# Change this to an explicit path (e.g. /usr/X11/lib/libX11.a)
# if your Xlib lives in a place that won't be found by -lX11.
#
X11_LIB		= @X_LIBS@  @X_PRE_LIBS@  -lX11  @X_EXTRA_LIBS@

# If you want you can pass make variable assignments to the
# subdirectory makefiles by uncommenting and editing the
# following assignment to EXTRA_SUBMAKEFLAGS.
#
# You can put multiple space separated assignments here if you want.
#
#EXTRA_SUBMAKEFLAGS = "-k"

# Flags for RISC/os from Conor Doherty and Hal R. Brand
# Edit HERE below to the absolute path to the ups source directory
#EXTRA_SUBMAKEFLAGS ="MORE_CFLAGS=-Driscos -DNO_DIRENT -DNO_PUTENV -IHERE/misc/riscos"

# If you are building ups for a Sun (any architecture) running SunOS 4.0.3
# or earlier then you must uncomment the following line.  If you don't
# you will get incorrect values for char and short parameters.  Note that
# this means you can't share a single ups binary between SunOS 4.1.1 and
# an earlier release.  You need to turn this flag on for SunOS 3.X.
#
#EXTRA_SUBMAKEFLAGS = "ARCH_CFLAGS=-DFIX_SHORT_PARAMS"
# -----------------------------------------------------------------------------

CPPFLAGS	= @CPPFLAGS@  @DEFS@  -I.  ${X11_INC}
CFLAGS		= @CFLAGS@  ${CPPFLAGS}
LDFLAGS		= @LDFLAGS@
LIBS		= @LIBS@

RANLIB		= @RANLIB@
LN_S		= @LN_S@

UPS_TARGET	= ups-native
UDB_TARGET	= ups-gdb
DEF_TARGET	= @DEF_TARGET@

SUBMAKEFLAGS	= ${EXTRA_SUBMAKEFLAGS}

BINDIRS		= ups med3 tests
LIBDIRS		= lib/libx11wn lib/libmtrprog lib/libukcprog lib/libarg \
		  lib/libMen3 lib/libobj lib/libedit

COMMONLIBS	= libx11wn libmtrprog libukcprog libarg \
		  libMen3 libobj libedit

SUBDIRS		= ${LIBDIRS} ${BINDIRS}


# -----------------------------------------------------------------------------
#  User targets
# -----------------------------------------------------------------------------

# Note: we use MFLAGS for the recursive makes rather than MAKEFLAGS.
# This is because the BSDI make loops forever if you say `make -',
# which is what you get if you say `${MAKE} -${MAKEFLAGS} when MAKEFLAGS
# is not set to anything.

default: ${DEF_TARGET}

all: ${DEF_TARGET} interpreter

ups: ups-native

interpreter: cx xc cg libci.a

install: install-${DEF_TARGET}

ups-native ups-gdb cx xc cg libci.a: ${COMMONLIBS}
	cd ups && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} $@

med3: libx11wn libMen3
	cd med3 && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} $@

${COMMONLIBS}: ups/develhdrs
	cd lib/$@ && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS}

libgdb.a: ups/develhdrs
	cd ups && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} $@

check:
	@echo No automatic tests yet. 1>&2

tests: testprogs

testprogs:
	cd tests && ${MAKE} ${MFLAGS} $@

install-ups-native: ups-native
	cd ups && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} \
			BINDIR=${BINDIR} \
			INCDIR=${INCDIR} \
			MANDIR=${MANDIR} MANSUFFIX=${MANSUFFIX} $@

install-med3: med3
	cd med3 && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} \
			BINDIR=${BINDIR} \
			INCDIR=${INCDIR} \
			MANDIR=${MANDIR} MANSUFFIX=${MANSUFFIX} $@

install-interpreter: cx xc cg libci.a
	cd ups && ${MAKE} ${MFLAGS} ${SUBMAKEFLAGS} \
			BINDIR=${BINDIR} \
			MANDIR=${MANDIR} MANSUFFIX=${MANSUFFIX} $@

# Clean up so can rebuild with a 'make'
clean: rmlinks
	for i in ${SUBDIRS}; do \
		(cd $$i && ${MAKE} ${MFLAGS} clean); \
	done
	@${MAKE} ${MFLAGS} -f Makefile.conf clean

# Try to leave the source directory as it came in the distribution
# Does not do sub-directories but is "good enough"
distclean: clean
	@-rm -f ifdefs.h config.log config.cache Makefile
	@${MAKE} ${MFLAGS} -f Makefile.conf distclean


# -----------------------------------------------------------------------------
#  Internal targets
# -----------------------------------------------------------------------------

rmlinks:
	@-rm -f lib/libmtrprog/ifdefs.h
	for i in ${SUBDIRS}; do \
		rm -rf $$i/develhdrs; \
	done

# The ups source assumes that various UKC libraries and header files
# are installed.  We distribute ups so that the source is self contained:
# this target makes the symlinks needed to support this.
ups/develhdrs:
	@echo "Making links to headers under ${topdir} ..."
	@-for i in ${SUBDIRS}; do mkdir $$i/develhdrs; done
	@-for i in Men3 arg mtrprog obj edit x11wn; do \
		mkdir lib/lib$$i/develhdrs/local; \
	done
	@-for i in Men3 arg obj edit x11wn; do \
		mkdir lib/lib$$i/develhdrs/mtrprog; \
	done
	@-for i in Men3 obj edit; do \
		ln -s ../../../../${topdir}/lib/libx11wn/wn.h \
					lib/lib$$i/develhdrs/local/wn.h; \
	done
	@-for i in arg mtrprog obj edit x11wn; do \
		ln -s ../../../../${topdir}/lib/libukcprog/ukcprog.h \
					lib/lib$$i/develhdrs/local/ukcprog.h; \
	done
	@-for i in obj; do \
		ln -s ../../../../${topdir}/lib/libmtrprog/genmergesort.h \
					lib/lib$$i/develhdrs/mtrprog/genmergesort.h; \
	done
	@-for i in obj; do \
		ln -s ../../../../${topdir}/lib/libmtrprog/alloc.h \
					lib/lib$$i/develhdrs/mtrprog/alloc.h; \
	done
	@-for i in edit; do \
		ln -s ../../../../${topdir}/lib/libmtrprog/utils.h \
					lib/lib$$i/develhdrs/mtrprog/utils.h; \
	done
	@-for i in ups med3; do \
		mkdir $$i/develhdrs/local; \
		mkdir $$i/develhdrs/mtrprog; \
	done
	@-ln -s ../../../../${topdir}/lib/libMen3/menu3.h lib/libx11wn/develhdrs/local/menu3.h
	@-ln -s ../../../${topdir}/lib/libarg/arg.h ups/develhdrs/local/arg.h
	@-ln -s ../../../${topdir}/lib/libMen3/menu3.h ups/develhdrs/local/menu3.h
	@-ln -s ../../../${topdir}/lib/libobj ups/develhdrs/local/obj
	@-ln -s ../../../${topdir}/lib/libedit ups/develhdrs/local/edit
	@-ln -s ../../../${topdir}/lib/libukcprog/ukcprog.h ups/develhdrs/local/ukcprog.h
	@-for f in alloc.h genmergesort.h hash.h io.h regex.h so.h strcache.h utils.h; do \
		ln -s ../../../${topdir}/lib/libmtrprog/$$f \
					ups/develhdrs/mtrprog/$$f; \
	done
	@-ln -s ../../../${topdir}/lib/libx11wn/wn.h ups/develhdrs/local/wn.h
	@-ln -s ../../../${topdir}/lib/libMen3/menu3.h med3/develhdrs/local/menu3.h
	@-ln -s ../../../${topdir}/lib/libx11wn/wn.h med3/develhdrs/local/wn.h
	@echo "Making links to local ifdefs.h ..."
	@-ln -s ../../ifdefs.h lib/libmtrprog/ifdefs.h
	@-for i in Men3 arg obj edit x11wn; do \
		ln -s ../../../../ifdefs.h \
					lib/lib$$i/develhdrs/mtrprog/ifdefs.h; \
	done
	@-ln -s ../../../ifdefs.h ups/develhdrs/mtrprog/ifdefs.h
	@-ln -s ../../../ifdefs.h med3/develhdrs/mtrprog/ifdefs.h


# -----------------------------------------------------------------------------
#  Building a release
# -----------------------------------------------------------------------------

# The rest of this makefile is concerned only with making releases from
# the master source directory.

# Odd files needed for particular architectures etc.
MISCFILES	= \
	tkups \
	misc/riscos/stdlib.h

# The gdb munging scripts and steering files
GDBFILES = gdbconf/initlist	 \
	   gdbconf/mkcalltree	 \
	   gdbconf/mkfunclist	 \
	   gdbconf/mkupsgdb	 \
	   gdbconf/mkccinfo	 \
	   gdbconf/mungeinit	 \
	   gdbconf/mungemakefile \
	   gdbconf/srcmunge	 \
	   gdbconf/zapcalls

# Files needed by AutoConf and configure
CONFIGFILES	= \
	Makefile.in Makefile.conf.in configure.in ifdefs.h.in \
	configure config.guess config.sub install-sh upsconf.c

# Documentation, X application resources
DOCFILES	= \
	README README.gdb README.multiarch README.maintain FAQ INSTALL BUGS \
	COPYING CHANGES Ups repltab PAD.xml README.dwarf

FILES		= ${DOCFILES} ${GDBFILES} ${MISCFILES} ${CONFIGFILES}
FILELIST	= releasefiles
CHECKRELEASE	= checkrelease
RELROOT		= releases
RELNAME		= ups-`sccs prs -d:I: ups/sccsdata.c`${RELTAG}

# Make a release as a compressed tar file
release: ${CHECKRELEASE} filelist ${RELROOT}
	@echo "Creating release file ${RELNAME} ..."
	@-rm -f thesefiles
	@sed -e "s;^;${RELNAME}/;" -e 's;/./;/;' < ${FILELIST} > thesefiles
	@rm -f ${RELNAME}
	@ln -s . ${RELNAME}
	@tar cf - `cat thesefiles` | gzip > ${RELROOT}/${RELNAME}.tar.gz
	@chmod 444 ${RELROOT}/${RELNAME}.tar.gz
	@(cd ${RELROOT} && md5 ${RELNAME}.tar.gz > ${RELNAME}.md5)
	@chmod 444 ${RELROOT}/${RELNAME}.md5
	@rm -f ${RELNAME}

testrelease:
	rm -f releases/ups-${RELTAG}.tar.gz
	@rm -f releases/ups-${RELTAG}.md5
	${MAKE} ${MFLAGS} CHECKRELEASE= RELNAME=ups-${RELTAG} release

${RELROOT}:
	mkdir ${RELROOT}

# Check that everything is checked in OK for a release
checkrelease:
	@echo "Checking release status ..."
	@here=`pwd`;                                      \
	 for i in ${SUBDIRS} .; do                        \
		if cd $$i && make sccs_check; then        \
			echo $$i OK for release;          \
		else                                      \
			failed="$$failed $$i";            \
		fi;                                       \
		cd $$here;                                \
	 done ;                                           \
	                                                  \
	 if test -n "$$failed"; then                      \
		echo;                                     \
		echo Not ready for release: $$failed;     \
		exit 0;                                   \
	 fi

sccs_check:
	@sccsinfo ${FILES}

# Put into ${FILELIST} a list of all the files that make up an
# ups source release.
filelist:
	@-rm -f ${FILELIST}
	@: > ${FILELIST}
	@for i in . lib ${SUBDIRS} ups-state interpreter packaging; do \
		echo Adding files from $$i; \
		(cd $$i && make list) | sed "s;^;$$i/;" >> ${FILELIST}; \
	done

# Count ...
count:
	@for i in ${SUBDIRS}; do \
		(cd $$i && ${MAKE} ${MFLAGS} count | sed -n "s@total@$$i@p"); \
	done

# List one to a line the files in this directory that should go in a release
list:
	@echo ${FILES} | tr ' ' '\012'


# -----------------------------------------------------------------------------
#  FreeBSD package/port, RPM etc.
# -----------------------------------------------------------------------------

freebsdport:
	(cd packaging && ${MAKE} ${MFLAGS} freebsdport)

rpmspec:
	(cd packaging && ${MAKE} ${MFLAGS} rpmspec)


# -----------------------------------------------------------------------------