Skip to content

Commit

Permalink
arm64: boot: dts: Convert to fully overlayed dts
Browse files Browse the repository at this point in the history 
Signed-off-by: iamsaalim <saalimquadri1@gmail.com>
  • Loading branch information
@danascape
danascape committed Dec 5, 2020
1 parent 2ede9e7 commit 85b3cb8
Show file tree
Hide file tree
Showing 20 changed files with 6,590 additions and 0 deletions.
10 changes: 10 additions & 0 deletions arch/arm64/boot/dts/qcom/Makefile
View file
Expand Up @@ -2,6 +2,15 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb

ifeq ($(CONFIG_MACH_ASUS),y)
ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
dtbo-$(CONFIG_MACH_ASUS_X01AD) += sdm632-X01AD-overlay.dtbo
sdm632-X01AD-overlay.dtbo-base := sdm632-X01AD.dtb
else
dtb-$(CONFIG_MACH_ASUS_X01AD) += sdm632-X01AD.dtb
endif
else

ifeq ($(CONFIG_BUILD_ARM64_DT_OVERLAY),y)
dtbo-$(CONFIG_ARCH_SDM845) += \
sdm845-cdp-overlay.dtbo \
Expand Down Expand Up @@ -671,6 +680,7 @@ dtb-$(CONFIG_ARCH_SDM429) += sdm429-mtp.dtb \
sdm429-bg-iot-wtp.dtb

endif
endif

dtb-$(CONFIG_ARCH_SDM845_VM) += sdm845-vm.dtb

Expand Down
11 changes: 11 additions & 0 deletions arch/arm64/boot/dts/qcom/X01AD/X01AD-base.dtsi
View file
@@ -0,0 +1,11 @@
#include "X01AD-msm8953.dtsi"
#include "X01AD-msm8953-audio.dtsi"
#include "X01AD-msm8953-camera-sensor-qrd.dtsi"
#include "X01AD-msm8953-pinctrl.dtsi"
#include "X01AD-msm8953-regulator.dtsi"
#include "X01AD-msm8953-thermal.dtsi"
#include "X01AD-pm8953.dtsi"
#include "X01AD-pmi632.dtsi"
#include "X01AD-sdm450-pmi632.dtsi"
#include "X01AD-sdm632.dtsi"
#include "X01AD-sdm632-regulator.dtsi"
17 changes: 17 additions & 0 deletions arch/arm64/boot/dts/qcom/X01AD/X01AD-msm8953-audio.dtsi
View file
@@ -0,0 +1,17 @@
/*
* Copyright (c) 2015-2016, 2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/

&int_codec {
qcom,msm-mbhc-hphl-swh = <1>;
qcom,msm-mbhc-gnd-swh = <1>;
};
258 changes: 258 additions & 0 deletions arch/arm64/boot/dts/qcom/X01AD/X01AD-msm8953-camera-sensor-qrd.dtsi
View file
@@ -0,0 +1,258 @@
/*
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/

&cci {

/delete-node/ qcom,actuator@0;
/delete-node/ qcom,eeprom@0;
/delete-node/ qcom,eeprom@2;
/delete-node/ qcom,camera@0;
/delete-node/ qcom,camera@1;
/delete-node/ qcom,camera@2;

actuator0: qcom,actuator@0 {
cell-index = <0>;
reg = <0x0>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
cam_vaf-supply = <&pm8953_l17>;
qcom,cam-vreg-name = "cam_vaf";
qcom,cam-vreg-min-voltage = <2850000>;
qcom,cam-vreg-max-voltage = <2850000>;
qcom,cam-vreg-op-mode = <200000>;
};

eeprom0: qcom,eeprom@0 {
cell-index = <0>;
compatible = "qcom,eeprom";
//qcom,cci-master = <0>;
reg = <0x0>;
cam_vio-supply = <&pm8953_l6>;
cam_vdig-supply = <&pm8953_l2>;
cam_vaf-supply = <&pm8953_l17>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vio","cam_vdig", "cam_vaf",
"cam_vana";
qcom,cam-vreg-min-voltage = <0 1200000 2850000 2850000>;
qcom,cam-vreg-max-voltage = <0 1200000 2850000 2850000>;
qcom,cam-vreg-op-mode = <0 105000 100000 80000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_default
&cam_sensor_rear_default>;
pinctrl-1 = <&cam_sensor_mclk0_sleep
&cam_sensor_rear_sleep>;
gpios = <&tlmm 26 0>,
<&tlmm 40 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_gcc clk_mclk0_clk_src>,
<&clock_gcc clk_gcc_camss_mclk0_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
eeprom1: qcom,eeprom@1 {
cell-index = <1>;
compatible = "qcom,eeprom";
reg = <0x1>;
cam_vdig-supply = <&pm8953_l23>;
cam_vio-supply = <&pm8953_l6>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;
qcom,cam-vreg-max-voltage = <1250000 1800000 2850000>;
qcom,cam-vreg-op-mode = <105000 105000 80000>;
//qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_default
&cam_sensor_front1_default>;
pinctrl-1 = <&cam_sensor_mclk1_sleep
&cam_sensor_front1_sleep>;
gpios = <&tlmm 27 0>,
<&tlmm 129 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET2";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <1>;
status = "ok";
clocks = <&clock_gcc clk_mclk1_clk_src>,
<&clock_gcc clk_gcc_camss_mclk1_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};

eeprom2: qcom,eeprom@2 {
cell-index = <2>;
reg = <0x2>;
compatible = "qcom,eeprom";
cam_vio-supply = <&pm8953_l6>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vio", "cam_vana";
qcom,cam-vreg-min-voltage = <1800000 2850000>;
qcom,cam-vreg-max-voltage = <1800000 2850000>;
qcom,cam-vreg-op-mode = <100000 80000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_default
&cam_sensor_front_default>;
pinctrl-1 = <&cam_sensor_mclk2_sleep
&cam_sensor_front_sleep>;
gpios = <&tlmm 28 0>,
<&tlmm 131 0>,
<&tlmm 132 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET1",
"CAM_STANDBY1";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <1>;
status = "ok";
clocks = <&clock_gcc clk_mclk2_clk_src>,
<&clock_gcc clk_gcc_camss_mclk2_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};

qcom,camera@0 {
cell-index = <0>;
compatible = "qcom,camera";
reg = <0x0>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,led-flash-src = <&led_flash0>;
qcom,eeprom-src = <&eeprom0>;
qcom,actuator-src = <&actuator0>;
cam_vio-supply = <&pm8953_l6>;
cam_vdig-supply = <&pm8953_l2>;
cam_vaf-supply = <&pm8953_l17>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vio","cam_vdig", "cam_vaf",
"cam_vana";
qcom,cam-vreg-min-voltage = <0 1100000 2850000 2850000>;
qcom,cam-vreg-max-voltage = <0 1200000 2850000 2850000>;
qcom,cam-vreg-op-mode = <0 105000 100000 80000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_default
&cam_sensor_rear_default>;
pinctrl-1 = <&cam_sensor_mclk0_sleep
&cam_sensor_rear_sleep>;
gpios = <&tlmm 26 0>,
<&tlmm 40 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0";
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_gcc clk_mclk0_clk_src>,
<&clock_gcc clk_gcc_camss_mclk0_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};



qcom,camera@1 {
cell-index = <1>;
compatible = "qcom,camera";
reg = <0x01>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <2>;
qcom,mount-angle = <270>;
qcom,eeprom-src = <&eeprom1>;
qcom,led-flash-src = <&led_flash1>;
cam_vdig-supply = <&pm8953_l23>;
cam_vio-supply = <&pm8953_l6>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;
qcom,cam-vreg-max-voltage = <1250000 1800000 2850000>;
qcom,cam-vreg-op-mode = <105000 105000 80000>;
//qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_default
&cam_sensor_front1_default>;
pinctrl-1 = <&cam_sensor_mclk1_sleep
&cam_sensor_front1_sleep>;
gpios = <&tlmm 27 0>,
<&tlmm 129 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET2";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <1>;
status = "ok";
clocks = <&clock_gcc clk_mclk1_clk_src>,
<&clock_gcc clk_gcc_camss_mclk1_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
qcom,camera@2 {
cell-index = <2>;
compatible = "qcom,camera";
reg = <0x2>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <90>;
qcom,eeprom-src = <&eeprom2>;
cam_vio-supply = <&pm8953_l6>;
cam_vana-supply = <&pm8953_l22>;
qcom,cam-vreg-name = "cam_vio", "cam_vana";
qcom,cam-vreg-min-voltage = <1800000 2850000>;
qcom,cam-vreg-max-voltage = <1800000 2850000>;
qcom,cam-vreg-op-mode = <100000 80000>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_default
&cam_sensor_front_default>;
pinctrl-1 = <&cam_sensor_mclk2_sleep
&cam_sensor_front_sleep>;
gpios = <&tlmm 28 0>,
<&tlmm 131 0>,
<&tlmm 132 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET1",
"CAM_STANDBY1";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <1>;
status = "ok";
clocks = <&clock_gcc clk_mclk2_clk_src>,
<&clock_gcc clk_gcc_camss_mclk2_clk>;
clock-names = "cam_src_clk", "cam_clk";
qcom,clock-rates = <24000000 0>;
};
};

0 comments on commit 85b3cb8

Please sign in to comment.