subscription.go

//
//
// File generated from our OpenAPI spec
//
//

package stripe

import (
	"encoding/json"
	"github.com/stripe/stripe-go/v73/form"
)

// Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay this subscription at the end of the cycle using the default source attached to the customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions.
type SubscriptionCollectionMethod string

// List of values that SubscriptionCollectionMethod can take
const (
	SubscriptionCollectionMethodChargeAutomatically SubscriptionCollectionMethod = "charge_automatically"
	SubscriptionCollectionMethodSendInvoice         SubscriptionCollectionMethod = "send_invoice"
)

// The payment collection behavior for this subscription while paused. One of `keep_as_draft`, `mark_uncollectible`, or `void`.
type SubscriptionPauseCollectionBehavior string

// List of values that SubscriptionPauseCollectionBehavior can take
const (
	SubscriptionPauseCollectionBehaviorKeepAsDraft       SubscriptionPauseCollectionBehavior = "keep_as_draft"
	SubscriptionPauseCollectionBehaviorMarkUncollectible SubscriptionPauseCollectionBehavior = "mark_uncollectible"
	SubscriptionPauseCollectionBehaviorVoid              SubscriptionPauseCollectionBehavior = "void"
)

// Transaction type of the mandate.
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionType string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionType can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionTypeBusiness SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionType = "business"
	SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionTypePersonal SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionType = "personal"
)

// Bank account verification method.
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethodAutomatic     SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod = "automatic"
	SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethodInstant       SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod = "instant"
	SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethodMicrodeposits SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod = "microdeposits"
)

// One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
type SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountType string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountType can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountTypeFixed   SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountType = "fixed"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountTypeMaximum SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountType = "maximum"
)

// Selected network to process this Subscription on. Depends on the available networks of the card attached to the Subscription. Can be only set confirm-time.
type SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkAmex            SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "amex"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkCartesBancaires SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "cartes_bancaires"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkDiners          SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "diners"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkDiscover        SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "discover"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkInterac         SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "interac"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkJCB             SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "jcb"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkMastercard      SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "mastercard"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkUnionpay        SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "unionpay"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkUnknown         SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "unknown"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardNetworkVisa            SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork = "visa"
)

// We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
type SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecure string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecure can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecureAny       SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecure = "any"
	SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecureAutomatic SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecure = "automatic"
)

// The funding method type to be used when there are not enough funds in the customer balance. Permitted values include: `bank_transfer`.
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceFundingType string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceFundingType can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceFundingTypeBankTransfer SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceFundingType = "bank_transfer"
)

// The list of permissions to request. The `payment_method` permission must be included.
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermissionBalances      SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission = "balances"
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermissionPaymentMethod SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission = "payment_method"
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermissionTransactions  SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission = "transactions"
)

// Bank account verification method.
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod string

// List of values that SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod can take
const (
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethodAutomatic     SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod = "automatic"
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethodInstant       SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod = "instant"
	SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethodMicrodeposits SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod = "microdeposits"
)

// The list of payment method types to provide to every invoice created by the subscription. If not set, Stripe attempts to automatically determine the types to use by looking at the invoice's default payment method, the subscription's default payment method, the customer's default payment method, and your [invoice template settings](https://dashboard.stripe.com/settings/billing/invoice).
type SubscriptionPaymentSettingsPaymentMethodType string

// List of values that SubscriptionPaymentSettingsPaymentMethodType can take
const (
	SubscriptionPaymentSettingsPaymentMethodTypeACHCreditTransfer  SubscriptionPaymentSettingsPaymentMethodType = "ach_credit_transfer"
	SubscriptionPaymentSettingsPaymentMethodTypeACHDebit           SubscriptionPaymentSettingsPaymentMethodType = "ach_debit"
	SubscriptionPaymentSettingsPaymentMethodTypeACSSDebit          SubscriptionPaymentSettingsPaymentMethodType = "acss_debit"
	SubscriptionPaymentSettingsPaymentMethodTypeAUBECSDebit        SubscriptionPaymentSettingsPaymentMethodType = "au_becs_debit"
	SubscriptionPaymentSettingsPaymentMethodTypeBACSDebit          SubscriptionPaymentSettingsPaymentMethodType = "bacs_debit"
	SubscriptionPaymentSettingsPaymentMethodTypeBancontact         SubscriptionPaymentSettingsPaymentMethodType = "bancontact"
	SubscriptionPaymentSettingsPaymentMethodTypeBoleto             SubscriptionPaymentSettingsPaymentMethodType = "boleto"
	SubscriptionPaymentSettingsPaymentMethodTypeCard               SubscriptionPaymentSettingsPaymentMethodType = "card"
	SubscriptionPaymentSettingsPaymentMethodTypeCustomerBalance    SubscriptionPaymentSettingsPaymentMethodType = "customer_balance"
	SubscriptionPaymentSettingsPaymentMethodTypeFPX                SubscriptionPaymentSettingsPaymentMethodType = "fpx"
	SubscriptionPaymentSettingsPaymentMethodTypeGiropay            SubscriptionPaymentSettingsPaymentMethodType = "giropay"
	SubscriptionPaymentSettingsPaymentMethodTypeGrabpay            SubscriptionPaymentSettingsPaymentMethodType = "grabpay"
	SubscriptionPaymentSettingsPaymentMethodTypeIDEAL              SubscriptionPaymentSettingsPaymentMethodType = "ideal"
	SubscriptionPaymentSettingsPaymentMethodTypeKonbini            SubscriptionPaymentSettingsPaymentMethodType = "konbini"
	SubscriptionPaymentSettingsPaymentMethodTypeLink               SubscriptionPaymentSettingsPaymentMethodType = "link"
	SubscriptionPaymentSettingsPaymentMethodTypePayNow             SubscriptionPaymentSettingsPaymentMethodType = "paynow"
	SubscriptionPaymentSettingsPaymentMethodTypePromptPay          SubscriptionPaymentSettingsPaymentMethodType = "promptpay"
	SubscriptionPaymentSettingsPaymentMethodTypeSEPACreditTransfer SubscriptionPaymentSettingsPaymentMethodType = "sepa_credit_transfer"
	SubscriptionPaymentSettingsPaymentMethodTypeSEPADebit          SubscriptionPaymentSettingsPaymentMethodType = "sepa_debit"
	SubscriptionPaymentSettingsPaymentMethodTypeSofort             SubscriptionPaymentSettingsPaymentMethodType = "sofort"
	SubscriptionPaymentSettingsPaymentMethodTypeUSBankAccount      SubscriptionPaymentSettingsPaymentMethodType = "us_bank_account"
	SubscriptionPaymentSettingsPaymentMethodTypeWeChatPay          SubscriptionPaymentSettingsPaymentMethodType = "wechat_pay"
)

// Either `off`, or `on_subscription`. With `on_subscription` Stripe updates `subscription.default_payment_method` when a subscription payment succeeds.
type SubscriptionPaymentSettingsSaveDefaultPaymentMethod string

// List of values that SubscriptionPaymentSettingsSaveDefaultPaymentMethod can take
const (
	SubscriptionPaymentSettingsSaveDefaultPaymentMethodOff            SubscriptionPaymentSettingsSaveDefaultPaymentMethod = "off"
	SubscriptionPaymentSettingsSaveDefaultPaymentMethodOnSubscription SubscriptionPaymentSettingsSaveDefaultPaymentMethod = "on_subscription"
)

// Specifies invoicing frequency. Either `day`, `week`, `month` or `year`.
type SubscriptionPendingInvoiceItemIntervalInterval string

// List of values that SubscriptionPendingInvoiceItemIntervalInterval can take
const (
	SubscriptionPendingInvoiceItemIntervalIntervalDay   SubscriptionPendingInvoiceItemIntervalInterval = "day"
	SubscriptionPendingInvoiceItemIntervalIntervalMonth SubscriptionPendingInvoiceItemIntervalInterval = "month"
	SubscriptionPendingInvoiceItemIntervalIntervalWeek  SubscriptionPendingInvoiceItemIntervalInterval = "week"
	SubscriptionPendingInvoiceItemIntervalIntervalYear  SubscriptionPendingInvoiceItemIntervalInterval = "year"
)

// Possible values are `incomplete`, `incomplete_expired`, `trialing`, `active`, `past_due`, `canceled`, or `unpaid`.
//
// For `collection_method=charge_automatically` a subscription moves into `incomplete` if the initial payment attempt fails. A subscription in this state can only have metadata and default_source updated. Once the first invoice is paid, the subscription moves into an `active` state. If the first invoice is not paid within 23 hours, the subscription transitions to `incomplete_expired`. This is a terminal state, the open invoice will be voided and no further invoices will be generated.
//
// A subscription that is currently in a trial period is `trialing` and moves to `active` when the trial period is over.
//
// If subscription `collection_method=charge_automatically` it becomes `past_due` when payment to renew it fails and `canceled` or `unpaid` (depending on your subscriptions settings) when Stripe has exhausted all payment retry attempts.
//
// If subscription `collection_method=send_invoice` it becomes `past_due` when its invoice is not paid by the due date, and `canceled` or `unpaid` if it is still not paid by an additional deadline after that. Note that when a subscription has a status of `unpaid`, no subsequent invoices will be attempted (invoices will be created, but then immediately automatically closed). After receiving updated payment information from a customer, you may choose to reopen and pay their closed invoices.
type SubscriptionStatus string

// List of values that SubscriptionStatus can take
const (
	SubscriptionStatusActive            SubscriptionStatus = "active"
	SubscriptionStatusCanceled          SubscriptionStatus = "canceled"
	SubscriptionStatusIncomplete        SubscriptionStatus = "incomplete"
	SubscriptionStatusIncompleteExpired SubscriptionStatus = "incomplete_expired"
	SubscriptionStatusPastDue           SubscriptionStatus = "past_due"
	SubscriptionStatusTrialing          SubscriptionStatus = "trialing"
	SubscriptionStatusUnpaid            SubscriptionStatus = "unpaid"
)

// Search for subscriptions you've previously created using Stripe's [Search Query Language](https://stripe.com/docs/search#search-query-language).
// Don't use search in read-after-write flows where strict consistency is necessary. Under normal operating
// conditions, data is searchable in less than a minute. Occasionally, propagation of new or updated data can be up
// to an hour behind during outages. Search functionality is not available to merchants in India.
type SubscriptionSearchParams struct {
	SearchParams `form:"*"`
	// A cursor for pagination across multiple pages of results. Don't include this parameter on the first call. Use the next_page value returned in a previous response to request subsequent results.
	Page *string `form:"page"`
}

// By default, returns a list of subscriptions that have not been canceled. In order to list canceled subscriptions, specify status=canceled.
type SubscriptionListParams struct {
	ListParams `form:"*"`
	// The collection method of the subscriptions to retrieve. Either `charge_automatically` or `send_invoice`.
	CollectionMethod        *string           `form:"collection_method"`
	Created                 *int64            `form:"created"`
	CreatedRange            *RangeQueryParams `form:"created"`
	CurrentPeriodEnd        *int64            `form:"current_period_end"`
	CurrentPeriodEndRange   *RangeQueryParams `form:"current_period_end"`
	CurrentPeriodStart      *int64            `form:"current_period_start"`
	CurrentPeriodStartRange *RangeQueryParams `form:"current_period_start"`
	// The ID of the customer whose subscriptions will be retrieved.
	Customer *string `form:"customer"`
	// The ID of the plan whose subscriptions will be retrieved.
	Plan *string `form:"plan"`
	// Filter for subscriptions that contain this recurring price ID.
	Price *string `form:"price"`
	// The status of the subscriptions to retrieve. Passing in a value of `canceled` will return all canceled subscriptions, including those belonging to deleted customers. Pass `ended` to find subscriptions that are canceled and subscriptions that are expired due to [incomplete payment](https://stripe.com/docs/billing/subscriptions/overview#subscription-statuses). Passing in a value of `all` will return subscriptions of all statuses. If no value is supplied, all subscriptions that have not been canceled are returned.
	Status *string `form:"status"`
	// Filter for subscriptions that are associated with the specified test clock. The response will not include subscriptions with test clocks if this and the customer parameter is not set.
	TestClock *string `form:"test_clock"`
}

// A list of prices and quantities that will generate invoice items appended to the next invoice for this subscription. You may pass up to 20 items.
type SubscriptionAddInvoiceItemParams struct {
	// The ID of the price object.
	Price *string `form:"price"`
	// Data used to generate a new [Price](https://stripe.com/docs/api/prices) object inline.
	PriceData *InvoiceItemPriceDataParams `form:"price_data"`
	// Quantity for this item. Defaults to 1.
	Quantity *int64 `form:"quantity"`
	// The tax rates which apply to the item. When set, the `default_tax_rates` do not apply to this item.
	TaxRates []*string `form:"tax_rates"`
}

// Automatic tax settings for this subscription. We recommend you only include this parameter when the existing value is being changed.
type SubscriptionAutomaticTaxParams struct {
	// Enabled automatic tax calculation which will automatically compute tax rates on all invoices generated by the subscription.
	Enabled *bool `form:"enabled"`
}

// Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period. Pass an empty string to remove previously-defined thresholds.
type SubscriptionBillingThresholdsParams struct {
	// Monetary threshold that triggers the subscription to advance to a new billing period
	AmountGTE *int64 `form:"amount_gte"`
	// Indicates if the `billing_cycle_anchor` should be reset when a threshold is reached. If true, `billing_cycle_anchor` will be updated to the date/time the threshold was last reached; otherwise, the value will remain unchanged.
	ResetBillingCycleAnchor *bool `form:"reset_billing_cycle_anchor"`
}

// A list of up to 20 subscription items, each with an attached price.
type SubscriptionItemsParams struct {
	Params `form:"*"`
	// Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period. When updating, pass an empty string to remove previously-defined thresholds.
	BillingThresholds *SubscriptionItemBillingThresholdsParams `form:"billing_thresholds"`
	// Delete all usage for a given subscription item. Allowed only when `deleted` is set to `true` and the current plan's `usage_type` is `metered`.
	ClearUsage *bool `form:"clear_usage"`
	// A flag that, if set to `true`, will delete the specified item.
	Deleted *bool `form:"deleted"`
	// Subscription item to update.
	ID *string `form:"id"`
	// Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
	Metadata map[string]string `form:"metadata"`
	// Plan ID for this item, as a string.
	Plan *string `form:"plan"`
	// The ID of the price object. When changing a subscription item's price, `quantity` is set to 1 unless a `quantity` parameter is provided.
	Price *string `form:"price"`
	// Data used to generate a new [Price](https://stripe.com/docs/api/prices) object inline.
	PriceData *SubscriptionItemPriceDataParams `form:"price_data"`
	// Quantity for this item.
	Quantity *int64 `form:"quantity"`
	// A list of [Tax Rate](https://stripe.com/docs/api/tax_rates) ids. These Tax Rates will override the [`default_tax_rates`](https://stripe.com/docs/api/subscriptions/create#create_subscription-default_tax_rates) on the Subscription. When updating, pass an empty string to remove previously-defined tax rates.
	TaxRates []*string `form:"tax_rates"`
}

// Additional fields for Mandate creation
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsParams struct {
	// Transaction type of the mandate.
	TransactionType *string `form:"transaction_type"`
}

// This sub-hash contains details about the Canadian pre-authorized debit payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitParams struct {
	// Additional fields for Mandate creation
	MandateOptions *SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsParams `form:"mandate_options"`
	// Verification method for the intent
	VerificationMethod *string `form:"verification_method"`
}

// This sub-hash contains details about the Bancontact payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsBancontactParams struct {
	// Preferred language of the Bancontact authorization page that the customer is redirected to.
	PreferredLanguage *string `form:"preferred_language"`
}

// Configuration options for setting up an eMandate for cards issued in India.
type SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsParams struct {
	// Amount to be charged for future payments.
	Amount *int64 `form:"amount"`
	// One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
	AmountType *string `form:"amount_type"`
	// A description of the mandate or subscription that is meant to be displayed to the customer.
	Description *string `form:"description"`
}

// This sub-hash contains details about the Card payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsCardParams struct {
	// Configuration options for setting up an eMandate for cards issued in India.
	MandateOptions *SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsParams `form:"mandate_options"`
	// Selected network to process this Subscription on. Depends on the available networks of the card attached to the Subscription. Can be only set confirm-time.
	Network *string `form:"network"`
	// We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
	RequestThreeDSecure *string `form:"request_three_d_secure"`
}

// Configuration for eu_bank_transfer funding type.
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferEUBankTransferParams struct {
	// The desired country code of the bank account information. Permitted values include: `DE`, `ES`, `FR`, `IE`, or `NL`.
	Country *string `form:"country"`
}

// Configuration for the bank transfer funding type, if the `funding_type` is set to `bank_transfer`.
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferParams struct {
	// Configuration for eu_bank_transfer funding type.
	EUBankTransfer *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferEUBankTransferParams `form:"eu_bank_transfer"`
	// The bank transfer type that can be used for funding. Permitted values include: `eu_bank_transfer`, `gb_bank_transfer`, `jp_bank_transfer`, or `mx_bank_transfer`.
	Type *string `form:"type"`
}

// This sub-hash contains details about the Bank transfer payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceParams struct {
	// Configuration for the bank transfer funding type, if the `funding_type` is set to `bank_transfer`.
	BankTransfer *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferParams `form:"bank_transfer"`
	// The funding method type to be used when there are not enough funds in the customer balance. Permitted values include: `bank_transfer`.
	FundingType *string `form:"funding_type"`
}

// This sub-hash contains details about the Konbini payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsKonbiniParams struct{}

// Additional fields for Financial Connections Session creation
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsParams struct {
	// The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
	Permissions []*string `form:"permissions"`
}

// This sub-hash contains details about the ACH direct debit payment method options to pass to the invoice's PaymentIntent.
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountParams struct {
	// Additional fields for Financial Connections Session creation
	FinancialConnections *SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsParams `form:"financial_connections"`
	// Verification method for the intent
	VerificationMethod *string `form:"verification_method"`
}

// Payment-method-specific configuration to provide to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsParams struct {
	// This sub-hash contains details about the Canadian pre-authorized debit payment method options to pass to the invoice's PaymentIntent.
	ACSSDebit *SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitParams `form:"acss_debit"`
	// This sub-hash contains details about the Bancontact payment method options to pass to the invoice's PaymentIntent.
	Bancontact *SubscriptionPaymentSettingsPaymentMethodOptionsBancontactParams `form:"bancontact"`
	// This sub-hash contains details about the Card payment method options to pass to the invoice's PaymentIntent.
	Card *SubscriptionPaymentSettingsPaymentMethodOptionsCardParams `form:"card"`
	// This sub-hash contains details about the Bank transfer payment method options to pass to the invoice's PaymentIntent.
	CustomerBalance *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceParams `form:"customer_balance"`
	// This sub-hash contains details about the Konbini payment method options to pass to the invoice's PaymentIntent.
	Konbini *SubscriptionPaymentSettingsPaymentMethodOptionsKonbiniParams `form:"konbini"`
	// This sub-hash contains details about the ACH direct debit payment method options to pass to the invoice's PaymentIntent.
	USBankAccount *SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountParams `form:"us_bank_account"`
}

// Payment settings to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsParams struct {
	// Payment-method-specific configuration to provide to invoices created by the subscription.
	PaymentMethodOptions *SubscriptionPaymentSettingsPaymentMethodOptionsParams `form:"payment_method_options"`
	// The list of payment method types (e.g. card) to provide to the invoice's PaymentIntent. If not set, Stripe attempts to automatically determine the types to use by looking at the invoice's default payment method, the subscription's default payment method, the customer's default payment method, and your [invoice template settings](https://dashboard.stripe.com/settings/billing/invoice).
	PaymentMethodTypes []*string `form:"payment_method_types"`
	// Either `off`, or `on_subscription`. With `on_subscription` Stripe updates `subscription.default_payment_method` when a subscription payment succeeds.
	SaveDefaultPaymentMethod *string `form:"save_default_payment_method"`
}

// Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling [Create an invoice](https://stripe.com/docs/api#create_invoice) for the given subscription at the specified interval.
type SubscriptionPendingInvoiceItemIntervalParams struct {
	// Specifies invoicing frequency. Either `day`, `week`, `month` or `year`.
	Interval *string `form:"interval"`
	// The number of intervals between invoices. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks).
	IntervalCount *int64 `form:"interval_count"`
}

// If specified, the funds from the subscription's invoices will be transferred to the destination and the ID of the resulting transfers will be found on the resulting charges.
type SubscriptionTransferDataParams struct {
	// A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice subtotal that will be transferred to the destination account. By default, the entire amount is transferred to the destination.
	AmountPercent *float64 `form:"amount_percent"`
	// ID of an existing, connected Stripe account.
	Destination *string `form:"destination"`
}

// Creates a new subscription on an existing customer. Each customer can have up to 500 active or scheduled subscriptions.
//
// When you create a subscription with collection_method=charge_automatically, the first invoice is finalized as part of the request.
// The payment_behavior parameter determines the exact behavior of the initial payment.
//
// To start subscriptions where the first invoice always begins in a draft status, use [subscription schedules](https://stripe.com/docs/billing/subscriptions/subscription-schedules#managing) instead.
// Schedules provide the flexibility to model more complex billing configurations that change over time.
type SubscriptionParams struct {
	Params `form:"*"`
	// A list of prices and quantities that will generate invoice items appended to the next invoice for this subscription. You may pass up to 20 items.
	AddInvoiceItems []*SubscriptionAddInvoiceItemParams `form:"add_invoice_items"`
	// A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice subtotal that will be transferred to the application owner's Stripe account. The request must be made by a platform account on a connected account in order to set an application fee percentage. For more information, see the application fees [documentation](https://stripe.com/docs/connect/subscriptions#collecting-fees-on-subscriptions).
	ApplicationFeePercent *float64 `form:"application_fee_percent"`
	// Automatic tax settings for this subscription. We recommend you only include this parameter when the existing value is being changed.
	AutomaticTax *SubscriptionAutomaticTaxParams `form:"automatic_tax"`
	// For new subscriptions, a past timestamp to backdate the subscription's start date to. If set, the first invoice will contain a proration for the timespan between the start date and the current time. Can be combined with trials and the billing cycle anchor.
	BackdateStartDate *int64 `form:"backdate_start_date"`
	// Either `now` or `unchanged`. Setting the value to `now` resets the subscription's billing cycle anchor to the current time (in UTC). For more information, see the billing cycle [documentation](https://stripe.com/docs/billing/subscriptions/billing-cycle).
	BillingCycleAnchor          *int64 `form:"billing_cycle_anchor"`
	BillingCycleAnchorNow       *bool  `form:"-"` // See custom AppendTo
	BillingCycleAnchorUnchanged *bool  `form:"-"` // See custom AppendTo
	// Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period. Pass an empty string to remove previously-defined thresholds.
	BillingThresholds *SubscriptionBillingThresholdsParams `form:"billing_thresholds"`
	// A timestamp at which the subscription should cancel. If set to a date before the current period ends, this will cause a proration if prorations have been enabled using `proration_behavior`. If set during a future period, this will always cause a proration for that period.
	CancelAt *int64 `form:"cancel_at"`
	// Boolean indicating whether this subscription should cancel at the end of the current period.
	CancelAtPeriodEnd *bool `form:"cancel_at_period_end"`
	// Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay this subscription at the end of the cycle using the default source attached to the customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions. Defaults to `charge_automatically`.
	CollectionMethod *string `form:"collection_method"`
	// The ID of the coupon to apply to this subscription. A coupon applied to a subscription will only affect invoices created for that particular subscription.
	Coupon *string `form:"coupon"`
	// Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
	Currency *string `form:"currency"`
	// The identifier of the customer to subscribe.
	Customer *string `form:"customer"`
	// Number of days a customer has to pay invoices generated by this subscription. Valid only for subscriptions where `collection_method` is set to `send_invoice`.
	DaysUntilDue *int64 `form:"days_until_due"`
	// ID of the default payment method for the subscription. It must belong to the customer associated with the subscription. This takes precedence over `default_source`. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source).
	DefaultPaymentMethod *string `form:"default_payment_method"`
	// ID of the default payment source for the subscription. It must belong to the customer associated with the subscription and be in a chargeable state. If `default_payment_method` is also set, `default_payment_method` will take precedence. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source).
	DefaultSource *string `form:"default_source"`
	// The tax rates that will apply to any subscription item that does not have `tax_rates` set. Invoices created will have their `default_tax_rates` populated from the subscription. Pass an empty string to remove previously-defined tax rates.
	DefaultTaxRates []*string `form:"default_tax_rates"`
	// The subscription's description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription for rendering in Stripe surfaces.
	Description *string `form:"description"`
	// A list of up to 20 subscription items, each with an attached price.
	Items []*SubscriptionItemsParams `form:"items"`
	// Indicates if a customer is on or off-session while an invoice payment is attempted.
	OffSession *bool   `form:"off_session"`
	OnBehalfOf *string `form:"on_behalf_of"`
	// If specified, payment collection for this subscription will be paused.
	PauseCollection *SubscriptionPauseCollectionParams `form:"pause_collection"`
	// Use `allow_incomplete` to transition the subscription to `status=past_due` if a payment is required but cannot be paid. This allows you to manage scenarios where additional user actions are needed to pay a subscription's invoice. For example, SCA regulation may require 3DS authentication to complete payment. See the [SCA Migration Guide](https://stripe.com/docs/billing/migration/strong-customer-authentication) for Billing to learn more. This is the default behavior.
	//
	// Use `default_incomplete` to transition the subscription to `status=past_due` when payment is required and await explicit confirmation of the invoice's payment intent. This allows simpler management of scenarios where additional user actions are needed to pay a subscription's invoice. Such as failed payments, [SCA regulation](https://stripe.com/docs/billing/migration/strong-customer-authentication), or collecting a mandate for a bank debit payment method.
	//
	// Use `pending_if_incomplete` to update the subscription using [pending updates](https://stripe.com/docs/billing/subscriptions/pending-updates). When you use `pending_if_incomplete` you can only pass the parameters [supported by pending updates](https://stripe.com/docs/billing/pending-updates-reference#supported-attributes).
	//
	// Use `error_if_incomplete` if you want Stripe to return an HTTP 402 status code if a subscription's invoice cannot be paid. For example, if a payment method requires 3DS authentication due to SCA regulation and further user action is needed, this parameter does not update the subscription and returns an error instead. This was the default behavior for API versions prior to 2019-03-14. See the [changelog](https://stripe.com/docs/upgrades#2019-03-14) to learn more.
	PaymentBehavior *string `form:"payment_behavior"`
	// Payment settings to pass to invoices created by the subscription.
	PaymentSettings *SubscriptionPaymentSettingsParams `form:"payment_settings"`
	// Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling [Create an invoice](https://stripe.com/docs/api#create_invoice) for the given subscription at the specified interval.
	PendingInvoiceItemInterval *SubscriptionPendingInvoiceItemIntervalParams `form:"pending_invoice_item_interval"`
	// The promotion code to apply to this subscription. A promotion code applied to a subscription will only affect invoices created for that particular subscription.
	PromotionCode *string `form:"promotion_code"`
	// Determines how to handle [prorations](https://stripe.com/docs/subscriptions/billing-cycle#prorations) when the billing cycle changes (e.g., when switching plans, resetting `billing_cycle_anchor=now`, or starting a trial), or if an item's `quantity` changes.
	ProrationBehavior *string `form:"proration_behavior"`
	// If set, the proration will be calculated as though the subscription was updated at the given time. This can be used to apply exactly the same proration that was previewed with [upcoming invoice](https://stripe.com/docs/api#retrieve_customer_invoice) endpoint. It can also be used to implement custom proration logic, such as prorating by day instead of by second, by providing the time that you wish to use for proration calculations.
	ProrationDate *int64 `form:"proration_date"`
	// If specified, the funds from the subscription's invoices will be transferred to the destination and the ID of the resulting transfers will be found on the resulting charges. This will be unset if you POST an empty value.
	TransferData *SubscriptionTransferDataParams `form:"transfer_data"`
	// Unix timestamp representing the end of the trial period the customer will get before being charged for the first time. This will always overwrite any trials that might apply via a subscribed plan. If set, trial_end will override the default trial period of the plan the customer is being subscribed to. The special value `now` can be provided to end the customer's trial immediately. Can be at most two years from `billing_cycle_anchor`.
	TrialEnd    *int64 `form:"trial_end"`
	TrialEndNow *bool  `form:"-"` // See custom AppendTo
	// Indicates if a plan's `trial_period_days` should be applied to the subscription. Setting `trial_end` per subscription is preferred, and this defaults to `false`. Setting this flag to `true` together with `trial_end` is not allowed. See [Using trial periods on subscriptions](https://stripe.com/docs/billing/subscriptions/trials) to learn more.
	TrialFromPlan *bool `form:"trial_from_plan"`
	// Integer representing the number of trial period days before the customer is charged for the first time. This will always overwrite any trials that might apply via a subscribed plan. See [Using trial periods on subscriptions](https://stripe.com/docs/billing/subscriptions/trials) to learn more.
	TrialPeriodDays *int64 `form:"trial_period_days"`
}

// AppendTo implements custom encoding logic for SubscriptionParams.
func (s *SubscriptionParams) AppendTo(body *form.Values, keyParts []string) {
	if BoolValue(s.BillingCycleAnchorNow) {
		body.Add(form.FormatKey(append(keyParts, "billing_cycle_anchor")), "now")
	}
	if BoolValue(s.BillingCycleAnchorUnchanged) {
		body.Add(form.FormatKey(append(keyParts, "billing_cycle_anchor")), "unchanged")
	}
	if BoolValue(s.TrialEndNow) {
		body.Add(form.FormatKey(append(keyParts, "trial_end")), "now")
	}
}

// If specified, payment collection for this subscription will be paused.
type SubscriptionPauseCollectionParams struct {
	// The payment collection behavior for this subscription while paused. One of `keep_as_draft`, `mark_uncollectible`, or `void`.
	Behavior *string `form:"behavior"`
	// The time after which the subscription will resume collecting payments.
	ResumesAt *int64 `form:"resumes_at"`
}

// Cancels a customer's subscription immediately. The customer will not be charged again for the subscription.
//
// Note, however, that any pending invoice items that you've created will still be charged for at the end of the period, unless manually [deleted](https://stripe.com/docs/api#delete_invoiceitem). If you've set the subscription to cancel at the end of the period, any pending prorations will also be left in place and collected at the end of the period. But if the subscription is set to cancel immediately, pending prorations will be removed.
//
// By default, upon subscription cancellation, Stripe will stop automatic collection of all finalized invoices for the customer. This is intended to prevent unexpected payment attempts after the customer has canceled a subscription. However, you can resume automatic collection of the invoices manually after subscription cancellation to have us proceed. Or, you could check for unpaid invoices before allowing the customer to cancel the subscription at all.
type SubscriptionCancelParams struct {
	Params `form:"*"`
	// Will generate a final invoice that invoices for any un-invoiced metered usage and new/pending proration invoice items.
	InvoiceNow *bool `form:"invoice_now"`
	// Will generate a proration invoice item that credits remaining unused time until the subscription period end.
	Prorate *bool `form:"prorate"`
}

// Removes the currently applied discount on a subscription.
type SubscriptionDeleteDiscountParams struct {
	Params `form:"*"`
}
type SubscriptionAutomaticTax struct {
	// Whether Stripe automatically computes tax on this subscription.
	Enabled bool `json:"enabled"`
}

// Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period
type SubscriptionBillingThresholds struct {
	// Monetary threshold that triggers the subscription to create an invoice
	AmountGTE int64 `json:"amount_gte"`
	// Indicates if the `billing_cycle_anchor` should be reset when a threshold is reached. If true, `billing_cycle_anchor` will be updated to the date/time the threshold was last reached; otherwise, the value will remain unchanged. This value may not be `true` if the subscription contains items with plans that have `aggregate_usage=last_ever`.
	ResetBillingCycleAnchor bool `json:"reset_billing_cycle_anchor"`
}

// If specified, payment collection for this subscription will be paused.
type SubscriptionPauseCollection struct {
	// The payment collection behavior for this subscription while paused. One of `keep_as_draft`, `mark_uncollectible`, or `void`.
	Behavior SubscriptionPauseCollectionBehavior `json:"behavior"`
	// The time after which the subscription will resume collecting payments.
	ResumesAt int64 `json:"resumes_at"`
}
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptions struct {
	// Transaction type of the mandate.
	TransactionType SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptionsTransactionType `json:"transaction_type"`
}

// This sub-hash contains details about the Canadian pre-authorized debit payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebit struct {
	MandateOptions *SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitMandateOptions `json:"mandate_options"`
	// Bank account verification method.
	VerificationMethod SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebitVerificationMethod `json:"verification_method"`
}

// This sub-hash contains details about the Bancontact payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsBancontact struct {
	// Preferred language of the Bancontact authorization page that the customer is redirected to.
	PreferredLanguage string `json:"preferred_language"`
}
type SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptions struct {
	// Amount to be charged for future payments.
	Amount int64 `json:"amount"`
	// One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
	AmountType SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptionsAmountType `json:"amount_type"`
	// A description of the mandate or subscription that is meant to be displayed to the customer.
	Description string `json:"description"`
}

// This sub-hash contains details about the Card payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsCard struct {
	MandateOptions *SubscriptionPaymentSettingsPaymentMethodOptionsCardMandateOptions `json:"mandate_options"`
	// Selected network to process this Subscription on. Depends on the available networks of the card attached to the Subscription. Can be only set confirm-time.
	Network SubscriptionPaymentSettingsPaymentMethodOptionsCardNetwork `json:"network"`
	// We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
	RequestThreeDSecure SubscriptionPaymentSettingsPaymentMethodOptionsCardRequestThreeDSecure `json:"request_three_d_secure"`
}
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferEUBankTransfer struct {
	// The desired country code of the bank account information. Permitted values include: `DE`, `ES`, `FR`, `IE`, or `NL`.
	Country string `json:"country"`
}
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransfer struct {
	EUBankTransfer *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransferEUBankTransfer `json:"eu_bank_transfer"`
	// The bank transfer type that can be used for funding. Permitted values include: `eu_bank_transfer`, `gb_bank_transfer`, `jp_bank_transfer`, or `mx_bank_transfer`.
	Type string `json:"type"`
}

// This sub-hash contains details about the Bank transfer payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalance struct {
	BankTransfer *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceBankTransfer `json:"bank_transfer"`
	// The funding method type to be used when there are not enough funds in the customer balance. Permitted values include: `bank_transfer`.
	FundingType SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalanceFundingType `json:"funding_type"`
}

// This sub-hash contains details about the Konbini payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsKonbini struct{}
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnections struct {
	// The list of permissions to request. The `payment_method` permission must be included.
	Permissions []SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnectionsPermission `json:"permissions"`
}

// This sub-hash contains details about the ACH direct debit payment method options to pass to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccount struct {
	FinancialConnections *SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountFinancialConnections `json:"financial_connections"`
	// Bank account verification method.
	VerificationMethod SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccountVerificationMethod `json:"verification_method"`
}

// Payment-method-specific configuration to provide to invoices created by the subscription.
type SubscriptionPaymentSettingsPaymentMethodOptions struct {
	// This sub-hash contains details about the Canadian pre-authorized debit payment method options to pass to invoices created by the subscription.
	ACSSDebit *SubscriptionPaymentSettingsPaymentMethodOptionsACSSDebit `json:"acss_debit"`
	// This sub-hash contains details about the Bancontact payment method options to pass to invoices created by the subscription.
	Bancontact *SubscriptionPaymentSettingsPaymentMethodOptionsBancontact `json:"bancontact"`
	// This sub-hash contains details about the Card payment method options to pass to invoices created by the subscription.
	Card *SubscriptionPaymentSettingsPaymentMethodOptionsCard `json:"card"`
	// This sub-hash contains details about the Bank transfer payment method options to pass to invoices created by the subscription.
	CustomerBalance *SubscriptionPaymentSettingsPaymentMethodOptionsCustomerBalance `json:"customer_balance"`
	// This sub-hash contains details about the Konbini payment method options to pass to invoices created by the subscription.
	Konbini *SubscriptionPaymentSettingsPaymentMethodOptionsKonbini `json:"konbini"`
	// This sub-hash contains details about the ACH direct debit payment method options to pass to invoices created by the subscription.
	USBankAccount *SubscriptionPaymentSettingsPaymentMethodOptionsUSBankAccount `json:"us_bank_account"`
}

// Payment settings passed on to invoices created by the subscription.
type SubscriptionPaymentSettings struct {
	// Payment-method-specific configuration to provide to invoices created by the subscription.
	PaymentMethodOptions *SubscriptionPaymentSettingsPaymentMethodOptions `json:"payment_method_options"`
	// The list of payment method types to provide to every invoice created by the subscription. If not set, Stripe attempts to automatically determine the types to use by looking at the invoice's default payment method, the subscription's default payment method, the customer's default payment method, and your [invoice template settings](https://dashboard.stripe.com/settings/billing/invoice).
	PaymentMethodTypes []SubscriptionPaymentSettingsPaymentMethodType `json:"payment_method_types"`
	// Either `off`, or `on_subscription`. With `on_subscription` Stripe updates `subscription.default_payment_method` when a subscription payment succeeds.
	SaveDefaultPaymentMethod SubscriptionPaymentSettingsSaveDefaultPaymentMethod `json:"save_default_payment_method"`
}

// Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling [Create an invoice](https://stripe.com/docs/api#create_invoice) for the given subscription at the specified interval.
type SubscriptionPendingInvoiceItemInterval struct {
	// Specifies invoicing frequency. Either `day`, `week`, `month` or `year`.
	Interval SubscriptionPendingInvoiceItemIntervalInterval `json:"interval"`
	// The number of intervals between invoices. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks).
	IntervalCount int64 `json:"interval_count"`
}

// If specified, [pending updates](https://stripe.com/docs/billing/subscriptions/pending-updates) that will be applied to the subscription once the `latest_invoice` has been paid.
type SubscriptionPendingUpdate struct {
	// If the update is applied, determines the date of the first full invoice, and, for plans with `month` or `year` intervals, the day of the month for subsequent invoices. The timestamp is in UTC format.
	BillingCycleAnchor int64 `json:"billing_cycle_anchor"`
	// The point after which the changes reflected by this update will be discarded and no longer applied.
	ExpiresAt int64 `json:"expires_at"`
	// List of subscription items, each with an attached plan, that will be set if the update is applied.
	SubscriptionItems []*SubscriptionItem `json:"subscription_items"`
	// Unix timestamp representing the end of the trial period the customer will get before being charged for the first time, if the update is applied.
	TrialEnd int64 `json:"trial_end"`
	// Indicates if a plan's `trial_period_days` should be applied to the subscription. Setting `trial_end` per subscription is preferred, and this defaults to `false`. Setting this flag to `true` together with `trial_end` is not allowed. See [Using trial periods on subscriptions](https://stripe.com/docs/billing/subscriptions/trials) to learn more.
	TrialFromPlan bool `json:"trial_from_plan"`
}

// The account (if any) the subscription's payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscription's invoices.
type SubscriptionTransferData struct {
	// A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice subtotal that will be transferred to the destination account. By default, the entire amount is transferred to the destination.
	AmountPercent float64 `json:"amount_percent"`
	// The account where funds from the payment will be transferred to upon payment success.
	Destination *Account `json:"destination"`
}

// Subscriptions allow you to charge a customer on a recurring basis.
//
// Related guide: [Creating Subscriptions](https://stripe.com/docs/billing/subscriptions/creating).
type Subscription struct {
	APIResource
	// ID of the Connect Application that created the subscription.
	Application *Application `json:"application"`
	// A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice subtotal that will be transferred to the application owner's Stripe account.
	ApplicationFeePercent float64                   `json:"application_fee_percent"`
	AutomaticTax          *SubscriptionAutomaticTax `json:"automatic_tax"`
	// Determines the date of the first full invoice, and, for plans with `month` or `year` intervals, the day of the month for subsequent invoices. The timestamp is in UTC format.
	BillingCycleAnchor int64 `json:"billing_cycle_anchor"`
	// Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period
	BillingThresholds *SubscriptionBillingThresholds `json:"billing_thresholds"`
	// A date in the future at which the subscription will automatically get canceled
	CancelAt int64 `json:"cancel_at"`
	// If the subscription has been canceled with the `at_period_end` flag set to `true`, `cancel_at_period_end` on the subscription will be true. You can use this attribute to determine whether a subscription that has a status of active is scheduled to be canceled at the end of the current period.
	CancelAtPeriodEnd bool `json:"cancel_at_period_end"`
	// If the subscription has been canceled, the date of that cancellation. If the subscription was canceled with `cancel_at_period_end`, `canceled_at` will reflect the time of the most recent update request, not the end of the subscription period when the subscription is automatically moved to a canceled state.
	CanceledAt int64 `json:"canceled_at"`
	// Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay this subscription at the end of the cycle using the default source attached to the customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions.
	CollectionMethod SubscriptionCollectionMethod `json:"collection_method"`
	// Time at which the object was created. Measured in seconds since the Unix epoch.
	Created int64 `json:"created"`
	// Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
	Currency Currency `json:"currency"`
	// End of the current period that the subscription has been invoiced for. At the end of this period, a new invoice will be created.
	CurrentPeriodEnd int64 `json:"current_period_end"`
	// Start of the current period that the subscription has been invoiced for.
	CurrentPeriodStart int64 `json:"current_period_start"`
	// ID of the customer who owns the subscription.
	Customer *Customer `json:"customer"`
	// Number of days a customer has to pay invoices generated by this subscription. This value will be `null` for subscriptions where `collection_method=charge_automatically`.
	DaysUntilDue int64 `json:"days_until_due"`
	// ID of the default payment method for the subscription. It must belong to the customer associated with the subscription. This takes precedence over `default_source`. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source).
	DefaultPaymentMethod *PaymentMethod `json:"default_payment_method"`
	// ID of the default payment source for the subscription. It must belong to the customer associated with the subscription and be in a chargeable state. If `default_payment_method` is also set, `default_payment_method` will take precedence. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source).
	DefaultSource *PaymentSource `json:"default_source"`
	// The tax rates that will apply to any subscription item that does not have `tax_rates` set. Invoices created will have their `default_tax_rates` populated from the subscription.
	DefaultTaxRates []*TaxRate `json:"default_tax_rates"`
	// The subscription's description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription for rendering in Stripe surfaces.
	Description string `json:"description"`
	// Describes the current discount applied to this subscription, if there is one. When billing, a discount applied to a subscription overrides a discount applied on a customer-wide basis.
	Discount *Discount `json:"discount"`
	// If the subscription has ended, the date the subscription ended.
	EndedAt int64 `json:"ended_at"`
	// Unique identifier for the object.
	ID string `json:"id"`
	// List of subscription items, each with an attached price.
	Items *SubscriptionItemList `json:"items"`
	// The most recent invoice this subscription has generated.
	LatestInvoice *Invoice `json:"latest_invoice"`
	// Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
	Livemode bool `json:"livemode"`
	// Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
	Metadata map[string]string `json:"metadata"`
	// Specifies the approximate timestamp on which any pending invoice items will be billed according to the schedule provided at `pending_invoice_item_interval`.
	NextPendingInvoiceItemInvoice int64 `json:"next_pending_invoice_item_invoice"`
	// String representing the object's type. Objects of the same type share the same value.
	Object     string   `json:"object"`
	OnBehalfOf *Account `json:"on_behalf_of"`
	// If specified, payment collection for this subscription will be paused.
	PauseCollection *SubscriptionPauseCollection `json:"pause_collection"`
	// Payment settings passed on to invoices created by the subscription.
	PaymentSettings *SubscriptionPaymentSettings `json:"payment_settings"`
	// Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling [Create an invoice](https://stripe.com/docs/api#create_invoice) for the given subscription at the specified interval.
	PendingInvoiceItemInterval *SubscriptionPendingInvoiceItemInterval `json:"pending_invoice_item_interval"`
	// You can use this [SetupIntent](https://stripe.com/docs/api/setup_intents) to collect user authentication when creating a subscription without immediate payment or updating a subscription's payment method, allowing you to optimize for off-session payments. Learn more in the [SCA Migration Guide](https://stripe.com/docs/billing/migration/strong-customer-authentication#scenario-2).
	PendingSetupIntent *SetupIntent `json:"pending_setup_intent"`
	// If specified, [pending updates](https://stripe.com/docs/billing/subscriptions/pending-updates) that will be applied to the subscription once the `latest_invoice` has been paid.
	PendingUpdate *SubscriptionPendingUpdate `json:"pending_update"`
	// The schedule attached to the subscription
	Schedule *SubscriptionSchedule `json:"schedule"`
	// Date when the subscription was first created. The date might differ from the `created` date due to backdating.
	StartDate int64 `json:"start_date"`
	// Possible values are `incomplete`, `incomplete_expired`, `trialing`, `active`, `past_due`, `canceled`, or `unpaid`.
	//
	// For `collection_method=charge_automatically` a subscription moves into `incomplete` if the initial payment attempt fails. A subscription in this state can only have metadata and default_source updated. Once the first invoice is paid, the subscription moves into an `active` state. If the first invoice is not paid within 23 hours, the subscription transitions to `incomplete_expired`. This is a terminal state, the open invoice will be voided and no further invoices will be generated.
	//
	// A subscription that is currently in a trial period is `trialing` and moves to `active` when the trial period is over.
	//
	// If subscription `collection_method=charge_automatically` it becomes `past_due` when payment to renew it fails and `canceled` or `unpaid` (depending on your subscriptions settings) when Stripe has exhausted all payment retry attempts.
	//
	// If subscription `collection_method=send_invoice` it becomes `past_due` when its invoice is not paid by the due date, and `canceled` or `unpaid` if it is still not paid by an additional deadline after that. Note that when a subscription has a status of `unpaid`, no subsequent invoices will be attempted (invoices will be created, but then immediately automatically closed). After receiving updated payment information from a customer, you may choose to reopen and pay their closed invoices.
	Status SubscriptionStatus `json:"status"`
	// ID of the test clock this subscription belongs to.
	TestClock *TestHelpersTestClock `json:"test_clock"`
	// The account (if any) the subscription's payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscription's invoices.
	TransferData *SubscriptionTransferData `json:"transfer_data"`
	// If the subscription has a trial, the end of that trial.
	TrialEnd int64 `json:"trial_end"`
	// If the subscription has a trial, the beginning of that trial.
	TrialStart int64 `json:"trial_start"`
}

// SubscriptionList is a list of Subscriptions as retrieved from a list endpoint.
type SubscriptionList struct {
	APIResource
	ListMeta
	Data []*Subscription `json:"data"`
}

// SubscriptionSearchResult is a list of Subscription search results as retrieved from a search endpoint.
type SubscriptionSearchResult struct {
	APIResource
	SearchMeta
	Data []*Subscription `json:"data"`
}

// UnmarshalJSON handles deserialization of a Subscription.
// This custom unmarshaling is needed because the resulting
// property may be an id or the full struct if it was expanded.
func (s *Subscription) UnmarshalJSON(data []byte) error {
	if id, ok := ParseID(data); ok {
		s.ID = id
		return nil
	}

	type subscription Subscription
	var v subscription
	if err := json.Unmarshal(data, &v); err != nil {
		return err
	}

	*s = Subscription(v)
	return nil
}