ports and devices not matching in 0.3.0 on MyNet N600

[jnny]

running 0.3.0 dispossessed on one of the new batch of MyNet N600s, with two extender nodes connected and functioning:
via /etc/config/notdhcpserver:

config server
	option enabled '1'
	option hook_script '/opt/notdhcpserver/hook.sh'
	option ssl_cert '/etc/uhttpd.crt'
	option ssl_key '/etc/uhttpd.key'
	option timeout_length '180'
	list addresses 'eth0.1=100.65.127.130/32'
	list addresses 'eth0.2=100.65.127.131/32'

When I plug into each of the ports, 1 and 4 give no lease (extender node ports), 2 is the public network (100.65...) and 3 is the private network (72.30.0.xx).

Screenshot below of what the admin dash shows me (extender nodes are plugged into ports 1 and 4, ports 2 and 3 are not connected):

[gobengo]

@jnny Can you elaborate a bit more?
What is your expected behavior?
What is actually happening other than that that you're surprised by?

Is it that you expect the dash diagram to show port 1 as connected?