py_led.rst

Note

Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

Why Join?

• Expert Support: Solve post-sale issues and technical challenges with help from our community and team.
• Learn & Share: Exchange tips and tutorials to enhance your skills.
• Exclusive Previews: Get early access to new product announcements and sneak peeks.
• Special Discounts: Enjoy exclusive discounts on our newest products.
• Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.

👉 Ready to explore and create with us? Click [] and join today!

2.1 Hello, LED!

Just as printing "Hello, world!" is the first step in learning to program, using a program to drive an LED is the traditional introduction to learning physical programming.

Required Components

In this project, we need the following components.

It's definitely convenient to buy a whole kit, here's the link:

Name	ITEMS IN THIS KIT	LINK
ESP32 Starter Kit	320+

You can also buy them separately from the links below.

COMPONENT INTRODUCTION	PURCHASE LINK
cpn_esp32_wroom_32e
cpn_esp32_camera_extension	-
cpn_breadboard
cpn_wires
cpn_resistor
cpn_led

Available Pins

Here is a list of available pins on the ESP32 board for this project.

Available Pins

IO13, IO12, IO14, IO27, IO26, IO25, IO33, IO32, IO15, IO2, IO0, IO4, IO5, IO18, IO19, IO21, IO22, IO23

Schematic

This circuit works on a simple principle, and the current direction is shown in the figure. The LED will light up after the 220ohm current limiting resistor when pin26 outputs high level. The LED will turn off when pin26 outputs low level.

Wiring

Run the Code

1. Open the 2.1_hello_led.py file located in the esp32-starter-kit-main\micropython\codes path, or copy and paste the code into Thonny.

   # Import the necessary libraries
   import machine
   import time
   
   # Set up the LED on pin 26 as an output pin
   led = machine.Pin(26, machine.Pin.OUT)
   
   # Start an infinite loop
   while True:
       # Turn on the LED by setting its value to 1 (HIGH)
       led.value(1)
       # Wait for 1 second (1000 milliseconds) while the LED is on
       time.sleep(1)
   
       # Turn off the LED by setting its value to 0 (LOW)
       led.value(0)
       # Wait for 0.5 seconds (500 milliseconds) while the LED is off
       time.sleep(0.5)

2. Connect the ESP32 WROOM 32E to your computer using a Micro USB cable.

   

3. Then click on the "MicroPython (ESP32).COMXX" interpreter in the bottom right corner.

   

4. Finally, click "Run Current Script" or press F5 to execute it.

   

5. After the code runs, you will see the LED blinking.

How it works?

1. It imports two modules, machine and time. The machine module provides low-level access to the microcontroller's hardware, while the time module provides functions for time-related operations.

   import machine
   import time

2. Then set up the pin26 as an output pin using the machine.Pin() function with the machine.Pin.OUT argument.

   led = machine.Pin(26, machine.Pin.OUT)

3. In the While True loop, the LED is turned on for one second by setting the value of the pin26 to 1 using led.value(1) and then set to 0(led.value(0)) to turn it off for one second, and so on in an infinite loop.

   while True:
       # Turn on the LED by setting its value to 1 (HIGH)
       led.value(1)
       # Wait for 1 second (1000 milliseconds) while the LED is on
       time.sleep(1)
   
       # Turn off the LED by setting its value to 0 (LOW)
       led.value(0)
       # Wait for 0.5 seconds (500 milliseconds) while the LED is off
       time.sleep(0.5)

Learn More

In this project, we used MicroPython's machine and time module, we can find more ways to use them here.

• machine.Pin
• time