-
Notifications
You must be signed in to change notification settings - Fork 172
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
no tool change popup dialog #329
Comments
Will think about improovement: perhaps handle Tx M06 as manual tool change if automatic tool change is disabled... |
yes that works, script move to toolchange pos. and spindel stops. would be cool to have this as Toolchange option with toolnumbers and popup etc. from Gcode |
Should be fixed now: https://github.com/svenhb/GRBL-Plotter/releases |
thanks a lot for your fast response! |
when i run the g code no tool change dialog popup
and the spindel ignore it and execute the next command
i like to use manual toolchange, at x0,y0,z1 position
created with CopperCAM
%
( CopperCAM - 20/03/2023 / ISO-Mill Output )
( C:\CopperCAM\test1.gcode created 24/03/2023 at 16:41 )
( Workpiece dimensions: 54.915 x 59.563 x 1 mm )
G21 G40 G54
G80 G90 G94
( Tool #1 "Universalfraeser 0.2mm" / Diameter 0.2 mm )
T1 M06
M03 S32
G00 Z1
G00 X47.496 Y16.889
G01 Z-1.2 F60
G00 Z1
G00 Y41.883
G01 Z-1.2
G00 Z1
M05
( Tool #3 "KonturCutter 1.5mm" / Diameter 1.5 mm )
T3 M06
M03 S32
G00 Z1
G00 X47.496 Y16.889
G01 Z-1.2
G01 X48.246 F300
G02 X48.246 Y16.889 I-0.75 J0
G01 X48.651
G02 X48.651 Y16.889 I-1.155 J0
G00 Z1
G00 X47.496 Y41.883
G01 Z-1.2 F60
G01 X48.246 F300
G02 X48.246 Y41.883 I-0.75 J0
G01 X48.651
G02 X48.651 Y41.883 I-1.155 J0
G00 Z1
M05
( Tool #6 "Bohrer 0.8mm" / Diameter 0.8 mm )
T6 M06
M03 S32
G00 Z1
G00 X35.914 Y4.443
G01 Z-1.2 F60
G00 Z1
G00 X25.754
G01 Z-1.2
G00 Z1
G00 Y12.063
G01 Z-1.2
G00 Z1
G00 Y22.223
G01 Z-1.2
G00 Z1
G00 Y24.763
G01 Z-1.2
G00 Z1
The text was updated successfully, but these errors were encountered: