Hex file named as from GRBL V1.1 actually from GRBL V0.9i

[SteveJgithub]

Describe the bug
**file v1.1_GRBL_coreXY_servo___.ino.standard.hex in release GRBL-Plotter-1.7.1.**0 seems to be based on v 0.9i of GRBL (not on v1.1h) as, when uploaded to the Arduino using Xloader, Xloader logs loading 29790 bytes and GRBL responds to the $I command with the GRBL 0.9i credentials.

To Reproduce
use Xloader to upload that hex file, connect and issue a $I command from the console

Expected behavior
the response to the $I command should be something like "" [VER:1.1h.20190825:] [OPT:V,15,128]"

Screenshots
N/A

[svenhb]

Yes, too bad. I took the hex file from here without testing: https://w.electrodragon.com/w/Arduino_CNC#Further_Use.2C_Documentation

And it is not version 1.1, because it is not accepting jog-command https://github.com/gnea/grbl/wiki/Grbl-v1.1-Jogging

[svenhb]

Here is a links to an other corexy version (probably without servo support); #199 (comment)

[svenhb]

Check here for new hex versions of grbl v1.1h for Uno or Nano: https://github.com/svenhb/GRBL-Plotter/tree/master/Firmware/hex_files
Compiled, using following options:
Config. Options

• I COREXY
• J COREXY and servo
• K COREXY and servo and servo-off inverted

[svenhb]

Now part of new setup: https://github.com/svenhb/GRBL-Plotter/releases