New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
The new version of the software (V1.7.1.1) does not display points in the dxf file #373
Comments
Yes, the problem is again your scaling: this drawing has an width of 479842 mm, the point marker has a size of 4 mm. |
I found that in CAD software, when zooming in and out on point entities, the size of the displayed points in CAD does not change with scaling and is a fixed value.Zooming in and out only changes the distance displayed between points (the display size of points does not change with the scaling ratio, and this feature only applies to point entities) |
Yes, as you described, I enlarged the graphics to a large size and indeed saw the plotter software displaying the points |
I have tested using different methods in CAD software many times and found that when I draw a few points on a large drawing and then scale the drawing to a very small size, the points cannot be seen in CAD. Therefore,I think there is no need to improve the function of displaying points in the plotter software I'm sorry, my incorrect consideration and lax verification have wasted your time |
Thank you for your hard work |
There is no other way to draw a circle with dashed line pattern then using G01 commands. |
What does the "Average G2/3 (Arc Move) commands, draw arcs/circles with line segments" check box do? |
Thank you for your hard work. I will conduct some tests |
Thank you very much for updating the software and adding new features
The software version v1.7.1.1 can correctly parse points in dxf files but will not display points
Plotter software display
CAD software display
Test dxf
1.zip
The text was updated successfully, but these errors were encountered: