Working / not working device list

[the-butterfry]

This is really great, thanks for your work on this. A few years ago it was pretty tough to get these guys reporting. I'll be converting a few of them over now.

Starting this thread for a list of the various models that are known to work or not. Please provide detail if not.

JBD-SP10S009-L8S-100A-B-K bluetooth: yes UART: untested
Notes: worked first try.

[it-koncept]

Thank you Sebastian for awesome software!
JBD-SP15S020-P13S-60A-B FW 1.3 bluetooth: untested UART: Yes
Notes: All sensors seem to work but the switch does not

[syssi]

The switches aren't implemented yet: https://github.com/syssi/esphome-jbd-bms/blob/main/components/jbd_bms/switch/jbd_switch.cpp#L12

[it-koncept]

Sorry I didn't realize that - but everything else works perfectly thanks for sharing your work 🥇

[syssi]

It's work in progress. The most important controls will be available at some point.

[mobilex-Godelmann]

JBD-SP18S-100A-086 Bluetooth: yes UART: untested

Great work! As a total beginner I had to figure out how the configuration worked, but eventually managed to get it done.
A more beginner friendly readme would be most welcome, let me know if I can support here.

Best regards,
Floke

[syssi]

I'm happy about every kind of support! Feel free to provide a step by step guide / tutorial.

[teunito]

JDB-SP16S020-100A Bluetooth: yes UART: untested
All sensors seem to work. The switches are working with #36

The BMS is build in a Basen 25,6 V 100 A battery pack (BG-24100)
Reported as Device model: BSJBD202210-28-005 (seems to be Date of manufacture: 2022.10.28).

[syssi]

I've updated the list of supported devices.

[Microguy31]

Thanks for this great piece of software!
JBD-SP22S003 bluetooth: yes UART: untested
All sensors work. Would like to try the switches asap :-).
Work on 16S 90Ah LiFePo4 battery and ESP32,Mqtt Server and Node-Red on M8S+ Armbian.
edit: works well too with "WT32-ETH01" Ethernet module.

[syssi]

@Microguy31 Could you provide the device model reported by the firmware (the state of the device_model text sensor)? I would like to add your device to the list of supported devices. The identifier provides details about the specs (supported cells + max. current) of your device.

[Microguy31]

The device model reported by the firmware is : SP22S003AL22S40A.

[syssi]

Thanks! I've updated the list of supported devices.

[TheNexter]

@Microguy31 Hi men, have you try the latest version with JBD-SP22S003? the switch to enable / disable the charge must be there if i read correctly the patch note ;)

[johkn]

JBD-SP22S003A-L22S bluetooth: yes UART: untested
Sensors: work
Switches: work state and command (after changing @main to @add-controls and coment balancer switch)
Binary sensors: work

System: ESP32 MQTT Nodered Iobroker

Thanks for this Software!

[syssi]

Do you own the 40A, 50A or 60A model? How many cells are supported?

[johkn]

My setup 50A and 16 cell (6-22 cell)

[cctweaker]

JBD-AP21S001-L21S-200A-B Bluetooth: yes UART: untested
Sensors: work, reporting correctly
Binary sensors: work, reporting correctly
Switches: untested yet, they are shown disabled, can not test until adding the second battery bank

Thank you very much for your code and time!
Just reporting that it works with the JBD-AP21S001-L21S-200A-B BMS via bluetooth.
Aithinker ESP32-S module is reporting via HA api.
1 BMS at the moment but I used the test-many-ble-connections branch because I will add a second BMS & battery bank soon(-ish).

[cctweaker]

Soon-ish became 1 month but today I managed to connect the second BMS and battery bank.
Everything is reported correctly. Has sporadic disconnects when all values are shown as Unknown but reconnects on its own.
test-many-ble-connections branch doesn't seem to have functional switches for charging/discharging.

[syssi]

I've pushed some improvements and merged the feature into main.

[cctweaker]

Right!
Just switched to latest main branch, works like a champ, charging and discharging switches too.

[baerrs]

ONYX RCR e-bike
JBD-SP25S003-P20S-100A-B Bluetooth: yes UART: untested
Sensors: work, reporting correctly
Binary sensors: work, reporting correctly
Switches: untested yet, they are shown
HA API: yes, MQTT: untested

I am getting a repeating error:

[02:44:45][W][component:204]: Component esp32_ble took a long time for an operation (0.24 s).
[02:44:45][W][component:205]: Components should block for at most 20-30ms.

I have not looked into this at all.

[02:42:04][D][jbd_bms_ble:263]:   Device model: JBD-SP25S003-P20S-100A-B
[02:42:04][D][sensor:094]: 'jbd-bms-ble total voltage': Sending state 75.58000 V with 2 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble current': Sending state 0.00000 A with 1 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble power': Sending state 0.00000 W with 1 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble charging power': Sending state 0.00000 W with 2 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble discharging power': Sending state 0.00000 W with 2 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble capacity remaining': Sending state 29.10000 Ah with 2 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble nominal capacity': Sending state 41.00000 Ah with 2 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble charging cycles': Sending state 21.00000  with 0 decimals of accuracy
[02:42:04][D][jbd_bms_ble:290]:   Date of manufacture: 2022.8.16
[02:42:04][D][sensor:094]: 'jbd-bms-ble balancer status bitmask': Sending state 0.00000  with 0 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble errors bitmask': Sending state 0.00000  with 0 decimals of accuracy
[02:42:04][D][text_sensor:064]: 'jbd-bms-ble errors': Sending state ''
[02:42:04][D][sensor:094]: 'jbd-bms-ble software version': Sending state 2.00000  with 1 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble state of charge': Sending state 71.00000 % with 0 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble operation status bitmask': Sending state 3.00000  with 0 decimals of accuracy
[02:42:04][D][sensor:094]: 'jbd-bms-ble battery strings': Sending state 20.00000  with 0 decimals of accuracy

This is the example ymal, with the MAC address changed and removed the cells above 20 (I only have 20).

Thanks for the great work !!

[syssi]

Thanks for your feedback! Please ignore the warning.

[baerrs]

I'm not sure if this is normal or not, it doesn't seem normal to me.

[syssi]

Please create a new issue and provide a log. It should include multiple balancer bitmask measurements.

[baerrs]

I can do that.. what logs are you looking for?

I wanted to share an image of the HA interface:

[chipsi]

JBD-SP22S003B-L21S-100A Bluetooth: yes UART: yes
Sensors: work, reporting correctly
Binary sensors: work, reporting correctly

JBD-SP22S003B-L22S-100A Bluetooth: yes UART: yes
Sensors: work, reporting correctly
Binary sensors: work, reporting correctly

JBD-AP20S003-L20S-200A-B Bluetooth: yes UART: yes
Sensors: work, reporting correctly
Binary sensors: work, reporting correctly

BLE mode sometimes communication gets stuck. UART mode is OK.

Great work