GPM to LPM OR m³/h

[romzzz13]

Hello I successfully installed the pool controller and the dashpanel, as well as the integration with homeassistant on a Pentair Intelliflo Whisperflow VSF pump

I would have liked to change the flow unit in the dashpanel and poolcontroller from GPM to m3/h and LPM as on my pump interface. Is this possible?

THANKS

[rstrouse]

Are you using Nixie or is this a Pentair OCP?

[romzzz13]

In nixie

[rstrouse]

What units do you have selected for the units in the General section?

[romzzz13]

yes i have selected metric units

[rstrouse]

Please supply a replay for the pump so that we can see if it is reporting the units on one of the bytes.

[romzzz13]

packetlog

{"port":0,"id":1089,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,6,1], [4],[1,49]],"ts":"2024-07-30T16:58:16.007+0200"}
{"port":0,"id":1090,"valid":true,"dir":"in","proto":"pump","for":[1089],"pkt":[[],[255,0,255],[165,0,33,96,6,1],[4],[1,49]],"ts": "2024-07-30T16:58:16.050+0200"}
{"port":0,"id":1091,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,4,1], [0],[1,43]],"ts":"2024-07-30T16:58:16.055+0200"}
{"port":0,"id":1092,"valid":true,"dir":"in","proto":"pump","for":[1091],"pkt":[[],[255,0,255],[165,0,33,96,4,1],[0],[1,43]],"ts": "2024-07-30T16:58:16.090+0200"}
{"port":0,"id":1093,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,6,1], [4],[1,49]],"ts":"2024-07-30T16:58:23.675+0200"}
{"port":0,"id":1094,"valid":true,"dir":"in","proto":"pump","for":[1093],"pkt":[[],[255,0,255],[165,0,33,96,6,1],[4],[1,49]],"ts": "2024-07-30T16:58:23.719+0200"}
{"port":0,"id":1095,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,7,0], [],[1,45]],"ts":"2024-07-30T16:58:24.731+0200"}
{"port":0,"id":1096,"valid":true,"dir":"in","proto":"pump","for":[1095],"pkt":[[],[255,0,255],[165,0,33,96,7,15],[4,0,255,0,0,0,0,0,0,0,0,0,0,16,59],[2,138]],"ts": "2024-07-30T16:58:24.799+0200"}
{"port":0,"id":1097,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,4,1], [255],[2,42]],"ts":"2024-07-30T16:58:24.807+0200"}
{"port":0,"id":1098,"valid":true,"dir":"in","proto":"pump","for":[1097],"pkt":[[],[255,0,255],[165,0,33,96,4,1],[255],[2,42]],"ts": "2024-07-30T16:58:24.842+0200"}

Consol log

[30/07/2024 16:58:23] info: Nixie Single Body control board initialized
[30/07/2024 16:58:23] info: {"port":0,"id":1093,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,6,1], [4],[1,49]],"ts":"2024-07-30T16:58:23.675+0200"}
[30/07/2024 16:58:23] verbose: Wrote packet [Port 0 id: 1093] [255,0,255,165,0,96,33,6,1,4,1,49].Retries remaining: 1
[30/07/2024 16:58:23] silly: Message in 1094 is a response for message out 1093
[30/07/2024 16:58:23] info: {"port":0,"id":1094,"valid":true,"dir":"in","proto":"pump","for":[1093],"pkt":[[],[255,0,255],[165,0,33,96,6,1],[4],[1,49]],"ts": "2024-07-30T16:58:23.719+0200"}
[30/07/2024 16:58:24] info: {"port":0,"id":1095,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,7,0], [],[1,45]],"ts":"2024-07-30T16:58:24.731+0200"}
[30/07/2024 16:58:24] verbose: Wrote packet [Port 0 id: 1095] [255,0,255,165,0,96,33,7,0,1,45].Retries remaining: 2
[30/07/2024 16:58:24] silly: Message in 1096 is a response for message out 1095
[30/07/2024 16:58:24] info: {"port":0,"id":1096,"valid":true,"dir":"in","proto":"pump","for":[1095],"pkt":[[],[255,0,255],[165,0,33,96,7,15],[4,0,255,0,0,0,0,0,0,0,0,0,0,16,59],[2,138]],"ts": "2024-07-30T16:58:24.799+0200"}
[30/07/2024 16:58:24] info: {"port":0,"id":1097,"valid":true,"dir":"out","proto":"pump","pkt":[[],[255,0,255], [165,0,96,33,4,1], [255],[2,42]],"ts":"2024-07-30T16:58:24.807+0200"}
[30/07/2024 16:58:24] verbose: Wrote packet [Port 0 id: 1097] [255,0,255,165,0,96,33,4,1,255,2,42].Retries remaining: 1
[30/07/2024 16:58:24] silly: Message in 1098 is a response for message out 1097
[30/07/2024 16:58:24] info: {"port":0,"id":1098,"valid":true,"dir":"in","proto":"pump","for":[1097],"pkt":[[],[255,0,255],[165,0,33,96,4,1],[255],[2,42]],"ts": "2024-07-30T16:58:24.842+0200"}
[30/07/2024 16:58:25] info: [16:58:25] 192.168.2.30 GET /app/config/stopPacketCapture?_=1722351010778 {}

[romzzz13]

are these logs the right ones?