njsPC not controlling chlorinator?

[TopJim]

njsPC does not appear to be controlling my IC20. DashPanel reports "Chlorinator Comms Error" but in "Comms" I am receiving data and I am able to change IC20 output and see salt ppm. Replay attached.

Background: I recently set up a chemical controller on Raspi 4b with njsPC/REM and Intellicenter i10d. My pool is closed for the winter; so right now it's only controlling my spa (although I do have all EZOs for pool set up in REM).

• Spa IC20 is on Aux USB1 RS-485, Intellicenter Aux3 relay. I have spa and IC20 on 24 hr schedules. IC20 set to 1%.
• intellicenter is on USB0 RS-485 (and when I get the pool running, its IC40 will also be on this bus).
• Other equipment: 2 ea EZO pH, ORP, RTD, PRS on Whitebox Labs T3 (1 HAT for pool, 1 for spa). Sequent 4rel4ind board controlling 2 ea Stenner E10FXA 24VDC.
  replay.zip

[rstrouse]

Is the spa the second body or the first. I think it is checking the chlorinator for the first body incorrectly. If it is then I will make sure it looks at the status for the correct body.

[TopJim]

Spa is set as 2nd body. Pool is off for the winter, so its pump and IC40 not powered. Davey JonesOn Feb 8, 2024, at 22:58, rstrouse ***@***.***> wrote: Is the spa the second body or the first. I think it is checking the chlorinator for the first body incorrectly. If it is then I will make sure it looks at the status for the correct body. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[rstrouse]

Yep it is not taking the second body into consideration when checking to see if the chlorinator is alive. As a result it displays a warning that the chlorinator is not communicating. I'll take a look and change this so it looks at only chlorinators on the same body as REM.

[TopJim]

Thanks for checking!

[TopJim]

I don't know if this is part of the issue or totally separate but I'm also getting similar behavior for the spa stenner pump relay. I am able to turn on the stenner pump using the "dose" button or the calibration function, but an ORP setpoint will not turn on the pump relay. Example: ORP is reading 750, my setpoint is 800--nothing happens.

[rstrouse]

Do you have it set to dose by manual? If so you need to set up a dose by volume.

[TopJim]

I have it set by volume.
I just tried something different and now the Spa auto-dosing works: I deleted the Pool IC40 and the Pool RemChem. So maybe there's some interaction like with the chlorinators on 2 bodies (chlorinator still has "comms error").
Now I go back and try to add the pool IC40 and get an error:
ApiError: You may not install a chlorinator on an intellicenter system that is assigned to the Primary Port that is under Nixe control
at NixieChlorinator.setChlorinatorAsync (/home/pi/nodejs-poolController/controller/nixie/chemistry/Chlorinator.ts:130:104)
at NixieChlorinatorCollection.setChlorinatorAsync (/home/pi/nodejs-poolController/controller/nixie/chemistry/Chlorinator.ts:44:25)
at IntelliCenterChlorinatorCommands.setChlorAsync (/home/pi/nodejs-poolController/controller/boards/SystemBoard.ts:3364:40)
at IntelliCenterChlorinatorCommands.setChlorAsync (/home/pi/nodejs-poolController/controller/boards/IntelliCenterBoard.ts:2376:95)
at /home/pi/nodejs-poolController/web/services/config/Config.ts:668:57
at Layer.handle [as handle_request] (/home/pi/nodejs-poolController/node_modules/express/lib/router/layer.js:95:5)
at next (/home/pi/nodejs-poolController/node_modules/express/lib/router/route.js:144:13)
at Route.dispatch (/home/pi/nodejs-poolController/node_modules/express/lib/router/route.js:114:3)
at Layer.handle [as handle_request] (/home/pi/nodejs-poolController/node_modules/express/lib/router/layer.js:95:5)
at /home/pi/nodejs-poolController/node_modules/express/lib/router/index.js:284:15
at Function.process_params (/home/pi/nodejs-poolController/node_modules/express/lib/router/index.js:346:12)
at next (/home/pi/nodejs-poolController/node_modules/express/lib/router/index.js:280:10)
at /home/pi/nodejs-poolController/web/Server.ts:749:25
at Layer.handle [as handle_request] (/home/pi/nodejs-poolController/node_modules/express/lib/router/layer.js:95:5)
at trim_prefix (/home/pi/nodejs-poolController/node_modules/express/lib/router/index.js:328:13)
at /home/pi/nodejs-poolController/node_modules/express/lib/router/index.js:286:9

[rstrouse]

That is correct. The IntelliCenter has to be in control of the IC40 on the primary port. Do not select Nixie to be in control.

[TopJim]

Then I deleted both pool IC40 and spa IC20 from DashPanel Chemistry tab and re-added them in order. And then re-configured the RemChem for Spa in DashPanel The auto-dose is now working. Don't know what the issue was at first. Still have the chlorinator comms error, though.

[rstrouse]

Pull njsPC it was in fact looking at the wrong chlorinator for dosing.

[TopJim]

I gotta go somewhere so will pull in about 2 hrs. I need to ask a moronic question tho: how do I “pull”?Davey JonesOn Feb 10, 2024, at 16:06, rstrouse ***@***.***> wrote: Pull njsPC it was in fact looking at the wrong chlorinator for dosing. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[rstrouse]

On the pi for the pool controller

cd ~/nodejs-poolController
git pull
npm i

[TopJim]

Do I need to stop njsPC or should I stop all 3 (njsPC, dashpanel, REM) before pulling?

[rstrouse]

If you are using pm2 it will automatically stop then reload when you are done.

[TopJim]

I did a pull (thx for the help on that), but it's not working now. On DashPanel I'm getting an error:
Error: connect ECONNREFUSED 10.0.0.26:4200
at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1555:16)
I powered everything down and restarted, but error persists. In "settings" it shows dashPanel 8.0.0
git branch master
git commit e3ff402

[TopJim]

Also, I search for server and it says:
"No running nodesjs-PoolController servers could be found. Enable SSDP on the pool controller application configuration"

[TopJim]

maybe I shouldn't have done the npm audit fix? Could that have screwed it up?

[rstrouse]

Never ever do that. I hate that message. Do a pull again and if you get an error run git reset —hard and pull again.

…

Sent from my iPhone

On Feb 10, 2024, at 4:12 PM, TopJimmy ***@***.***> wrote:  maybe I shouldn't have done the npm audit fix? Could that have screwed it up? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.

[TopJim]

OK I restored and pulled again. Git commit for njsPC 8.0.1 is c3f9a06
It still says "chlorinator comms error"
It says "Chlorinating .01458 -- 15 min" but it shouldn't be because my ORP is 798 and my setpoint is 750. So it appears it's not being controlled because output is still showing 1%.

I have a chemical controller set up for the pool (but its IC40 is off because the pump CB is off; Intellicenter think the pump is on).

Don't know if it means anything or not, but on DashPanel "REMChemPool" is showing pH and ORP nearly equal to "REMChemSpa" even though REM is reporting Pool EZOs as 678 mV & 13.9 ph (because I don't have sensors hooked up).

I checked the feeds (that I am able to configure). Spa is controller ID 51, Pool is 50. Replay attached.
replay.zip

[TopJim]

Feeds are for Spa:
Ezo/connection/val/to
RTD/internal/tempC/ph_spa
PRS/none
ORP/david/ORP/chemcontroller 51
pH/david/ph/chemcontroller 51

For pool:
RTD/internal/tempC/ph_pool
PRS/none
ORP/david/orp/chemcontroller 50
pH/david/ph/chemcontroller 50

Is that all what it should be? Is the controller ID a arbitrary number? Otherwise, IDK why it’s 50 and 51.

[rstrouse]

It is 50+ because IntelliChem has to be 1. Look in the poolConfig.json but that seems right.

[rstrouse]

I’ll have a look at your replay tomorrow.

[TopJim]

For the time being, I switched the Spa IC20 to the intellicenter RS-485. I figured since I use the pool 7 months out of the year, would make better sense to have the Spa IC20 on the main data bus. All appears well for now. We'll see what happens when I get the pool going in Apr/Mar timeframe.
One question: I have the Spa IC20 set to 1% with dynamic dosing on, so REMChem cycles it from 0% to 1%. Should I set a higher percentage setting?

[tagyoureit]

The IC20 (and all models) only ever are on or off. They don't actually run at a percentage. 1% is the amount of time that the salt cell will be on. AKA it will be on full (100%) for 1% of the day. If your chlorine levels are where you want them, that's the best indicator. You can also use your ORP feed as a target and the chlorinator timing will adjust to best meet that target.

[TopJim]

Cool, so just that I understand fully (and correct me if I'm wrong): when dynamic dosing is enabled the % setting has no meaning.
Thanks again to you and to rstrouse for helping me and authoring the software. It's pretty sweet.

Next project is to be able to bring up DashPanel outside my LAN, such as when I'm traveling away from home.
What's the best way to do this? I'm not that knowledgeable when it comes to networking, so the only thing that comes to mind is getting a static IP from my ISP, but since that costs a monthly fee, I'd like to do something else, if possible.

[TopJim]

Nevermind, I discovered ZeroTier. Works great.

[TopJim]

I now have my pool and spa running. I installed the chlorinators in DashPanel like this:
Pool --> i10d --> primary USB port 0 (RemChem refers to controller ID 50).
Spa --> external --> Aux USB port 1 (RemChem refers to Controller ID 51)

Poolconfig.json shows pool IC40 on ID 1 and Spa IC20 on id 50. DashPanel reports "Controller Body Mismatch" under "Pool RemChem". I tried changing RemChem controller ID's to match 1 and 50, but still get "Controller Body Mismatch" and in DashPanel both Pool & Spa are reporting values from Spa ORP sensor. So I switched it back to 50 and 51 in RemChem.

Some other symptoms:

1. I am able to manually control Spa IC20 from DashPanel.
2. I am seemingly able to control Pool IC40 from DashPanel, but when I look at the IC40 panel it seems that it is being interrupted. The indicators lights do not show steady but briefly flash at 5 sec or so intervals.
3. Somewhat similar behavior when I choose dynamic for pool: it sort of flashes 100% at odd intervals. It's almost like njsPC and Intellicenter are fighting for control of the Pool IC40. I imagine: NjsPC will tell it to go to 100% and then Intellicenter will tell it to go back to 0 (or whatever intellicenter is set to) and repeats.
4. When I choose dynamic for spa, it doesn't control the spa IC20, but it controls the Pool IC40 with the same behavior as the above.
5. I tried installing the Pool IC40 as "external", but when I then try to install the Spa IC20 on "external" get an error message "You may not install a chlorinator on an intellicenter system that is assigned to the Primary Port that is under Nixe control" and then it deletes the pool IC40. Sometimes I don't get an error message, but it deletes the Pool IC40 whenever I try this.

Is there a bug which is coding the controller ID's in the chlorinator section of poolConfig.json incorrectly?
Or am I doing something wrong?
poolConfig.json

[tagyoureit]

Try to switch the probes/EZO circuits and see if you get the same results. Helps to eliminate any wiring or other oddities. But the probes do go bad. If you need to buy a new one, lots of ppl have had really good luck with the industrial probes. They cost a bit more, but seems to last a lot longer.

[TopJim]

I set it up like you said and the pool IC40 is working, but not the spa IC20.
Symptoms:

• SpaREMChem says it's chlorinating, but Spa IC20 says output 0%, and the IC20 physical panel shows 0%.
• When I turn off the pool IC40 via relay, SpaRemChem reports a "chlorinator comms error" for the spa IC20. When I turn the pool IC40 back on, the "chlorinator comms error" on the spa goes away. However, on my connections tab, the spa IC20 reports 0 failures.

Replay attached.
replay (1).zip

[tagyoureit]

SpaREMChem says it's chlorinating, but Spa IC20 says output 0%, and the IC20 physical panel shows 0%.

In the logs, the ORP is in the mixing state for both chlorinators and remains that way. Is the display showing that the chlor was chlorinating during this replay? It looks like it is off per the poolState.json.

[4/7/2024, 9:44:42 PM] verbose: Chem mixing orp remaining: 4min 22sec
...
[4/7/2024, 9:44:43 PM] verbose: Chem mixing orp remaining: 1hr 24min 43sec

When I turn off the pool IC40 via relay, SpaRemChem reports a "chlorinator comms error" for the spa IC20. When I turn the pool IC40 back on, the "chlorinator comms error" on the spa goes away. However, on my connections tab, the spa IC20 reports 0 failures.

I'm also not seeing any of the circuits toggled in this replay. There is only one send failure in the comms in the entire log.
When you do turn the circuit off, or just in general, are you seeing other stats increase on the same port?

I can also tell you that the alarms are system wide. You won't get a different alarm for the IC40 vs the IC20. It would take quite a bit of rework to do alarms at the equipment level. If you turn off the IC20 instead, you should see the same alarm.

[TopJim]

Thx for looking--good to know about the alarms. I must have sent the wrong replay. I'll try again tonight, sorry about that.

[TopJim]

I couldn’t make my ORP probes (lab grade) act right so I ordered the industrial ones, see how it goes, then I’ll re-attack my config issue, examine the port traffic, send a new replay, if necessary.