FOUNDRY-SN-SWITCH-GROUP.mib

FOUNDRY-SN-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,Integer32,Unsigned32, Gauge32, Counter32, Counter64, TimeTicks, IpAddress
		FROM SNMPv2-SMI
	switch
		FROM FOUNDRY-SN-ROOT-MIB
	DisplayString,MacAddress
		FROM FOUNDRY-SN-AGENT-MIB
	InterfaceIndex, ifIndex, InterfaceIndexOrZero
		FROM IF-MIB
	TruthValue,TEXTUAL-CONVENTION
		FROM SNMPv2-TC;

snSwitch MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
	REVISION     "200909300000Z" -- September 30, 2009
	DESCRIPTION
			"convert from SMIv1 to SMIv2"
   ::= {  switch 3 }

		-- textual conventions



	PhysAddress ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			  This data type is used to model media addresses.  For many
			  types of media, this will be in a binary representation.
			  For example, an ethernet address would be represented as
			  a string of 6 octets.
			"
		SYNTAX	OCTET STRING

	BridgeId ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			 the Bridge-Identifier as used in the Spanning Tree
			"
		SYNTAX	OCTET STRING (SIZE(8))

	Timeout ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			a STP timer in units of 1/100 seconds
			"
		SYNTAX	Integer32

	PortMask ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			  This data type is used to model port bitmask.  The
			  maximum of ports are 32.
			"
		SYNTAX	Integer32


	 InterfaceId ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
	  -- This data type is used to specify an interface ID.
	  -- The first object identifier is port type, and the
	  -- format of the rest of the object identifiers depend
	  -- on the port type.
	  --
	  -- ethernet(1), format: type.slot.port
	  --   e.g. 1.3.6 is port ethernet 3/6
	  --
	  -- pos(2), format: type.slot.port
	  --   e.g. 2.10.1 is port pos 10/1
	  --
	  -- atm(3), format: type.slot.port
	  --   e.g. 3.8.2 is port atm 8/2
	  --
	  -- virtual router interface(4), format: type.ve
	  --   e.g. 4.9 is port ve 9
	  --
	  -- loopback(5), format: type.lb
	  --   e.g. 5.7 is port loopback 7
	  --
	  -- gre tunnel(6), format: type.tn, not supported
	  --
	  -- subinterface(7), format: type.slot.port.subInterface
	  --   e.g. 7.3.2.4 is port atm 3/2.4
	  --
	  -- mpls tunnel(8), format: type.tn
	  --   e.g. 8.3 is port tunnel 3
	  --
	  -- pvc(9), format: type.slot.port.subInterface.vpi.vci
	  --   e.g. 9.3.1.2.1.2 is port atm 3/1.2.1.2
	  --
	  -- management(10), format: type.slot.port
	  --   e.g. 10.17.1 is port management 17/1
	  --
	  -- tunnel(11), format: type.trunkid
	  --   e.g. 11.3 is trunk id 3
	  --
	  -- virtual management(12), format: type
	  --   e.g. 10 is the virtual management interface
			"
		SYNTAX	OBJECT IDENTIFIER




	 InterfaceId2 ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
	  -- This data type is used to specify an interface ID.  The
	  -- first object identifier is port type, and the format of
	  -- the rest of the object identifiers depend on the port
	  -- type.  Note that for types which include a reference to a
	  -- physical port, the formats vary according to the type of
	  -- port identifiers that the device uses (e.g. 6, 3/6, or
	  -- 2/3/6).  New port type values will be added in the future
	  -- as needed.  For a given type code, new formats may also
	  -- be added in the future.  Each format for a given type
	  -- code will have a unique length.  Applications should
	  -- check the OID length and not assume that it will match
	  -- one of the currently defined formats.
	  --
	  -- Though the OIDs are shown here in a shortened form, the
	  -- actual OIDs are prefixed with the OID of snInterfaceId
	  -- (so the OID for 1.2.3.6 would actually be
	  -- snInterfaceId.1.2.3.6, which is equivalent to
	  -- snEthernetInterface.2.3.6.).
	  --
	  -- ethernet(1), formats:
	  --  type.port (e.g. 1.6 is port ethernet 6)
	  --  type.slot.port (e.g. 1.3.6 is port ethernet 3/6)
	  --  type.unit.slot.port (e.g. 1.2.3.6 is port ethernet 2/3/6)
	  --
	  -- pos(2), formats:
	  --  type.port (e.g. 2.6 is port pos 6)
	  --  type.slot.port (e.g. 2.3.6 is port pos 3/6)
	  --  type.unit.slot.port (e.g. 2.2.3.6 is port pos 2/3/6)
	  --
	  -- atm(3), format: type.slot.port
	  --  type.port (e.g. 3.6 is port atm 6)
	  --  type.slot.port (e.g. 3.3.6 is port atm 3/6)
	  --  type.unit.slot.port (e.g. 3.2.3.6 is port atm 2/3/6)
	  --
	  -- virtual router interface(4), format: type.ve
	  --   e.g. 4.9 is port ve 9
	  --
	  -- loopback(5), format: type.lb
	  --   e.g. 5.7 is port loopback 7
	  --
	  -- gre tunnel(6), format: type.tn, not supported
	  --
	  -- subinterface(7), formats:
	  --  type.port.subInterface (e.g. 7.6.4 is port atm 6.4)
	  --  type.slot.port.subInterface (e.g. 7.3.6.4 is port atm 3/6.4)
	  --  type.unit.slot.port.subInterface
	  --    (e.g. 7.2.3.6.4 is port atm 2/3/6.4)
	  --
	  -- mpls tunnel(8), format: type.tn
	  --   e.g. 8.3 is port tunnel 3
	  --
	  -- pvc(9), formats:
	  --  type.port.subInterface.vpi.vci
	  --    (e.g. 9.6.2.1.2 is port atm 6.2.1.2)
	  --  type.slot.port.subInterface.vpi.vci
	  --    (e.g. 9.3.6.2.1.2 is port atm 3/6.2.1.2)
	  --  type.unit.slot.port.subInterface.vpi.vci
	  --    (e.g. 9.2.3.6.2.1.2 is port atm 2/3/6.2.1.2)
	  --
	  -- management(10), formats:
	  --  type.port (e.g. 10.1 is port management 1)
	  --  type.slot.port (e.g. 10.2.1 is port management 2/1)
	  --  type.unit.slot.port (e.g. 10.4.2.1 is port management 4/2/1)
	  --
	  -- trunk(11), format: type.trunkid
	  --   e.g. 11.3 is trunk id 3
	  --
	  -- virtual management(12), format: type
	  --   e.g. 12 is the virtual management interface
			"
		SYNTAX	OBJECT IDENTIFIER

VlanTagMode ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION
	   "Vlan tag mode for a given vlan member."
	 SYNTAX        INTEGER{
							 tagged(1),
							 untagged(2),
							 dual(3)
						 }

FdryVlanIdOrNoneTC ::= TEXTUAL-CONVENTION
		DISPLAY-HINT "d"
		STATUS       current
		DESCRIPTION
			"The VLAN-ID that uniquely identifies a specific VLAN,
			or no VLAN.  The special value of zero is used to
			indicate that no VLAN-ID is present or used.  This can
			be used in any situation where an object or a table entry
			must refer either to a specific VLAN, or to no VLAN.

			Note that a MIB object that is defined using this
			TEXTUAL-CONVENTION should clarify the meaning of
			'no VLAN' (i.e., the special value 0)."
		SYNTAX       Integer32 (0 | 1..4094)

BrcdVlanIdTC ::= TEXTUAL-CONVENTION
		DISPLAY-HINT "d"
		STATUS       current
		DESCRIPTION
			"The VLAN-ID that uniquely identifies a specific VLAN."
		SYNTAX       Integer32 (1..4090)

PortQosTC ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
		"The port QOS Priority hardware queue. 0 is lowest priority, 7 is the highest."
   SYNTAX  INTEGER {
				   level0(0),
				   level1(1),
				   level2(2),
				   level3(3),
				   level4(4),
				   level5(5),
				   level6(6),
				   level7(7),
				   invalid(127)
				   }


PortPriorityTC ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
              "Refers to the IEEE 802.1p priority, or Priority Code Point (PCP).
              1 is the lowest, 8 is the highest. The value 128 may be used to
              indicate invalid priority or priority is not enabled."
   SYNTAX    INTEGER {
                  priority0 (1),
                  priority1 (2),
                  priority2 (3),
                  priority3 (4),
                  priority4 (5),
                  priority5 (6),
                  priority6 (7),
                  priority7 (8),
                  nonPriority (128)
                 }


-- Groups

snSwInfo 	            OBJECT IDENTIFIER ::= { snSwitch 1 }
snVLanInfo				OBJECT IDENTIFIER ::= { snSwitch 2 }
snSwPortInfo 	  		OBJECT IDENTIFIER ::= { snSwitch 3 }
snFdbInfo				OBJECT IDENTIFIER ::= { snSwitch 4 }
snPortStpInfo			OBJECT IDENTIFIER ::= { snSwitch 5 }
snTrunkInfo				OBJECT IDENTIFIER ::= { snSwitch 6 }
snSwSummary				OBJECT IDENTIFIER ::= { snSwitch 7 }
snDhcpGatewayListInfo	OBJECT IDENTIFIER ::= { snSwitch 8 }
snDnsInfo				OBJECT IDENTIFIER ::= { snSwitch 9 }
snMacFilter				OBJECT IDENTIFIER ::= { snSwitch 10 }
snNTP					OBJECT IDENTIFIER ::= { snSwitch 11 }
snRadius				OBJECT IDENTIFIER ::= { snSwitch 12 }
snTacacs				OBJECT IDENTIFIER ::= { snSwitch 13 }
snQos					OBJECT IDENTIFIER ::= { snSwitch 14 }
snAAA					OBJECT IDENTIFIER ::= { snSwitch 15 }
snCAR 					OBJECT IDENTIFIER ::= { snSwitch 16 }
snVLanCAR 				OBJECT IDENTIFIER ::= { snSwitch 17 }
snNetFlow 				OBJECT IDENTIFIER ::= { snSwitch 18 }
snSFlow 				OBJECT IDENTIFIER ::= { snSwitch 19 }
snFDP 				    OBJECT IDENTIFIER ::= { snSwitch 20 }
snVsrp   				OBJECT IDENTIFIER ::= { snSwitch 21 }
snArpInfo				OBJECT IDENTIFIER ::= { snSwitch 22 }
snWireless 				OBJECT IDENTIFIER ::= { snSwitch 23 }
snMac	 				OBJECT IDENTIFIER ::= { snSwitch 24 }
snPortMonitor			OBJECT IDENTIFIER ::= { snSwitch 25 }
snSSH					OBJECT IDENTIFIER ::= { snSwitch 26 }
snSSL					OBJECT IDENTIFIER ::= { snSwitch 27 }
snMacAuth				OBJECT IDENTIFIER ::= { snSwitch 28 }
snMetroRing				OBJECT IDENTIFIER ::= { snSwitch 29 }
-- snSwitch 30 should not be used
snStacking				OBJECT IDENTIFIER ::= { snSwitch 31 }
fdryMacVlanMIB          OBJECT IDENTIFIER ::= { snSwitch 32 }
fdryLinkAggregationGroupMIB OBJECT IDENTIFIER ::= { snSwitch 33 }
fdryDns2MIB				OBJECT IDENTIFIER ::= { snSwitch 34 }
fdryDaiMIB				OBJECT IDENTIFIER ::= { snSwitch 35 }
fdryDhcpSnoopMIB			OBJECT IDENTIFIER ::= { snSwitch 36 }
fdryIpSrcGuardMIB			OBJECT IDENTIFIER ::= { snSwitch 37 }
-- snSwitch 38 used for brcdDot1xAuth MIB

-- SECTION 2: Switch Group Configuration MIBs


snSwGroupOperMode OBJECT-TYPE
	SYNTAX  INTEGER {
		noVLan(1),
		vlanByPort(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"noVLan(1) represents all switch ports with no virtual
		 LAN by port (no Port VLAN), and with no tag assigned.
		 vlanByPort(2) represents all switch ports with Basic
		 VLAN (layer2 Switch). "
	::= { snSwInfo 1 }

snSwGroupIpL3SwMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group is configured with the Layer3
		 IP Switch mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate Layer3 IP Switch
		 disabled(0)..........disable Layer3 IP Switch"
	::= { snSwInfo 2 }


snSwGroupIpMcastMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group is configured with the IP Multicast
		 pruning mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate IP Multicast pruning
		 disabled(0)..........no IP Multicast pruning"
	::= { snSwInfo 3 }


snSwGroupDefaultCfgMode OBJECT-TYPE
	SYNTAX  INTEGER {
		default(1),
		nonDefault(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group is configured with the Default
		 configuration. If the default configuration gets
		 overwritten, the state will change to non-default.
		 default(1)...........default configuration
		 nonDefault(2)..........non default configuration"
	::= { snSwInfo 4 }


snSwGroupSwitchAgeTime OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Age time is 180sec by default.
		 The configured range is 10 to 10,000sec.  The time
		 represents the time span to age out an MAC Address
		 entry."
	::= { snSwInfo 5 }



snVLanGroupVlanCurEntry OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The current total entry number of VLANs are configured."
	::= { snSwInfo 6 }


snVLanGroupSetAllVLan OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The value of this object is the VLanIndex of a particalur
		 entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId).
		 All the attributes of that row of table except PortMask
		 will be used to set the same attributes for the
		 entire VLan group. VLanId and PortMask must be set for
				 that particular entry prior to setting this object.
		 Switch software will base on that VLAN information
		 to set the entire VLAN.
		 Note: All the intended attributes of the given
		 row of the table (given VLAN) must be set prior
		 setting this object.  When this object is set,
		 Set-All-VLAN action will take place simultaneously.
		 The previous setting will be overwritten by the
		 new one."
	::= { snSwInfo 7 }


snSwPortSetAll OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The value of this object is the index number of the
		 snSwPortInfoTable (snSwPortInfoPortIndex).
		 snSwPortInfoMonitorMode, snSwPortInfoTagMode,
		 snSwPortInfoChnMode, snSwPortInfoSpeed,
		 snSwPortInfoAdminStatus are all the
		 read-write attributes of that row of table.
		 They will be used to set the same attributes for
		 all the ports in the system.
		 Note: prior setting this object, all the intended
		 attributes of the given row of the table must be set.
		 Otherwise, the current data of the row will be used to
		 set the entire port-table. The previous setting will
		 be overwritten by the new one."
	::= { snSwInfo 8 }



snFdbTableCurEntry OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The current total entry number of FDB are configured."
	::= { snSwInfo 9 }


snFdbTableStationFlush OBJECT-TYPE
	SYNTAX  INTEGER {
		normal(1),
		error(2),
		flush(3),
		flushing(4)
	}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The following values of the flush state
		 can only be read:
		  normal(1)... normal state
		  error(2)... operation failed
		  flushing(4)... in process

		The following value can be written:
		  flush(3).....do flush

		The agent will return a response even before the flush is done.
		And the read value will be flushing until flush is done.
		And the flush request will be rejected until error or normal."
	::= { snSwInfo 10 }


snPortStpSetAll OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The value of this object is 1 which means invoking
				 Port STP Set-all command.  The snPortStpPriority,
				 snPortStpPathCost, the read-write STP related
				 attributes of the first row of table will be used
				 to set the same attributes for all the ports in the
				 system.
		 Note: prior setting this object, all the intended
		 attributes of the given row of the table must be set.
		 Otherwise, the current data of the row will be used to
		 set the entire port-table. The previous setting will
		 be overwritten by the new one."
	::= { snSwInfo 11 }


snSwProbePortNum OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A chassis switch probe port is operated as a traffic analyzer
		 port and only one port can be assigned in the chassis.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number.
		 A stackable switch is only assigned with one probe port as a
		 traffic analyzer."
	::= { snSwInfo 12 }


snSw8021qTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group is configured with the IEEE802.1q
		 Tagging mode either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate IEEE802.1q Tagging mode.
		 disabled(0)..........no IEEE802.1q Tagging."
	::= { snSwInfo 13 }


snSwGlobalStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Spanning Tree System Global Mode in the Switch Group
		 can be set either enabled or disabled and the default is
		 enabled mode.
		 enabled(1)...........activate Spanning Tree
		 disabled(0)..........no Spanning Tree"
	::= { snSwInfo 14 }


snSwIpMcastQuerierMode OBJECT-TYPE
	SYNTAX  INTEGER {
		querier(1),
		nonQuerier(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The IP Multicast pruning mode is configured either
		 Non-Querier or Querier mode and the default is
		 querier mode.
		 querier(1)...........when prunning traffic locally
							  within the VLAN.
		 nonQuerier(2)........when running with a multicast
							  capable router in the network."
	::= { snSwInfo 15 }

snSwViolatorPortNumber OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"The port number of the switch or router that received
		 a violator packet. It is included in the locked
		 address violation trap.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snSwInfo 17 }

snSwViolatorMacAddress OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"The source address of the violator packet received
		 by the switch or router. It is included in the locked
		 address violation trap."
	::= { snSwInfo 18 }

snVLanGroupVlanMaxEntry OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The maximum number of VLAN entries that are allowed to configure.

		On NetIron products, This object will be implemented as read-only.
		Set request will be returned with not writable error.
		To set the maximum allowed vlan, use snAgentSysParaConfigEntry."
	::= { snSwInfo 19 }

snSwEosBufferSize OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A specific buffer size for all the different EOS buffers."
	::= { snSwInfo 20 }

snVLanByPortEntrySize OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "The size of each VLAN table entry."
	::= { snSwInfo 21 }

snSwPortEntrySize OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "The size of each port table entry."
	::= { snSwInfo 22 }

snFdbStationEntrySize OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "The size of each Fdb station table entry."
	::= { snSwInfo 23 }

snPortStpEntrySize OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "The size of each port stp table entry."
	::= { snSwInfo 24 }

snSwEnableBridgeNewRootTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate bridge new root traps."
	DEFVAL { enabled }
	::= { snSwInfo 25 }

snSwEnableBridgeTopoChangeTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate bridge topology change
		traps."
	DEFVAL { enabled }
	::= { snSwInfo 26 }

snSwEnableLockedAddrViolationTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate locked address violation
		traps."
	DEFVAL { enabled }
	::= { snSwInfo 27 }

snSwIpxL3SwMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group is configured with the Layer3
		 IPX Switch mode either enabled or disabled and
		 the default is disabled mode.
		 enabled(1)...........activate Layer3 Switch
		 disabled(0)..........disable Layer3 Switch"
	::= { snSwInfo 28 }

snVLanByIpSubnetMaxSubnets OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of subnets for each IP VLAN."
	::= { snSwInfo 29 }

snVLanByIpxNetMaxNetworks OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of networks for each IPX VLAN."
	::= { snSwInfo 30 }

snSwProtocolVLanMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"disabled(0) - represents system with Protocol VLAN disabled.
		 enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN)."
	::= { snSwInfo 31 }

snMacStationVLanId OBJECT-TYPE
	SYNTAX  INTEGER (0..4095)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"This VLAN ID controls filtering of the Forwarding Database
		table in the standard Bridge MIB (dot1dTpFdbTable).  Since the
		dot1dTpFdbTable contains MAC addresses associated with each of
		the ports in the bridge, and each MAC address can be
		associated with different VLANs, the snMacStationVLanId can be
		used by users to specify which VLAN's MAC Station information
		the dot1dTpFdbTable should provide.  If this variable is set
		to zero (the default value), all MAC station entries will be
		returned when the dot1dTpFdbTable is retrieved.  The
		VLAN-aware dot1qTpFdbTable described in RFC 2674 should be
		used as a replacement for this variable."
	::= { snSwInfo 32 }

snSwClearCounters OBJECT-TYPE
	SYNTAX  INTEGER {
		valid(0),
		clear(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
		 clear(1) - represents clear counter command of the following counters:
					Dot3, MIB2, IP and IPX counters for all ports."
	::= { snSwInfo 33 }

snSw8021qTagType OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The IEEE802.1q tag type embedded in the length/type field of
		an Ethernet packet. It specifies that the 2 octets after the
		length/type field in an Ethernet packet is the tag value."
	DEFVAL { 33024 }
	::= { snSwInfo 34 }

snSwBroadcastLimit OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Limit the number of broadcast packets to forward out of the
		switch ports. This object specifies the number of broadcast
		packets per second. Setting a value of 0 to this object
		disables the limitation check."
	DEFVAL { 0 }
	::= { snSwInfo 35 }

snSwMaxMacFilterPerSystem  OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of MAC Filters per system in the MAC Filter table."
	::= { snSwInfo 36 }

snSwMaxMacFilterPerPort  OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The maximum number of MAC Filters per port in the Port MAC Access Filter table."
	::= { snSwInfo 37 }

snSwDefaultVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The VLAN ID of the DEFAULT PORT-VLAN."
	::= { snSwInfo 38 }

snSwGlobalAutoNegotiate OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1),
		negFullAuto(2),
		other(3)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This feature only applies to Gigabit Ethernet ports. If set
		to disable(0), all Gigabit Ethernet ports will be put to non-
		negotiation mode. If set to enable(1), all Gigabit Ethernet
		ports will start auto-negotiation indefinitely until succeed.
		If set to negFullAuto(2), all Gigabit Ethernet ports will start
		with auto-negotiation, if the negotiation failed, then they
		will automatically switch to non-negotiation mode. Stackable
		products (except TurboIron 8) Gigabit Ethernet ports do not
		support negFullAuto(2). If the snSwPortInfoAutoNegotiate value
		of a port was not set to global, this global value does not
		apply to the negotiation mode of that port."
	DEFVAL { negFullAuto }
	::= { snSwInfo 39 }

snSwQosMechanism OBJECT-TYPE
	SYNTAX	INTEGER { strict(0), weighted(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates whether the qos mechanism is
		 strict or weighted."
	DEFVAL { weighted }
	::= { snSwInfo 40 }

snSwSingleStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
				disable(0),
				enableStp(1),
				enableRstp(2)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Single Spanning Tree System Mode in the Switch Group
		 can be set either enabled or disabled and the default is
		 disabled mode.
		 disable(0)...........no Single Spanning Tree
		 enableStp(1).........activate SSTP control vlan to run Spanning Tree
		 enableRstp(2)........activate SSTP control vlan to run Rapid Spanning Tree"
	::= { snSwInfo 41 }

snSwFastStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Fast Spanning Tree System Mode in the Switch Group
		 can be set either enabled or disabled and the default is
		 enabled mode.
		 enabled(1)...........activate Fast Spanning Tree
		 disabled(0)..........no Fast Spanning Tree"
	::= { snSwInfo 42 }

snSwViolatorIfIndex OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port number of the switch or router that received
		 a violator packet. It is included in the locked
		 address violation trap."
	::= { snSwInfo 43 }

snSwSingleStpVLanId OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID of the Single Spanning Tree VLAN if Single
		Spanning Tree was enabled. This object returns zero if
		Single Spanning Tree was disabled."
	::= { snSwInfo 44 }


-- VLAN Layer 2 Switch VLAN By Port Information Table


snVLanByPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"If snSwGroupOperMode is configured as basic mode
		 which is VLAN by Port, Layer2 switching,
		 then this table is valid.  Each VLAN switch port
		 could have a number of VLAN IDs."
	::= { snVLanInfo 1 }


snVLanByPortEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"An entry in the VLAN By Port Information table.
		 snVLanByPortVLanIndex = 1 and with
		 snVLanByPortVLanId = 1 together implies all attributes
		 applying to the Global switch group i.e. noVLan.
		 A SNMP SET PDU for a row of the snVLanByPortTable
		 requires the entired sequence of the MIB Objects in each
		 snVLanByPortEntry stored in one PDU.  Otherwise,
	 GENERR return-value will be returned."
	INDEX   {
		snVLanByPortVLanIndex
	}
	::= { snVLanByPortTable 1 }


SnVLanByPortEntry ::= SEQUENCE {
	snVLanByPortVLanIndex
		INTEGER,
	snVLanByPortVLanId
		INTEGER,
	snVLanByPortPortMask
		PortMask,
	snVLanByPortQos
		INTEGER,
	snVLanByPortStpMode
		INTEGER,
	snVLanByPortStpPriority
		INTEGER,
	snVLanByPortStpGroupMaxAge
		INTEGER,
	snVLanByPortStpGroupHelloTime
		INTEGER,
	snVLanByPortStpGroupForwardDelay
		INTEGER,
	snVLanByPortRowStatus
		INTEGER,
	snVLanByPortOperState
		INTEGER,
	snVLanByPortBaseNumPorts
		Integer32,
	snVLanByPortBaseType
		INTEGER,
	snVLanByPortStpProtocolSpecification
		INTEGER,
	snVLanByPortStpMaxAge
		Timeout,
	snVLanByPortStpHelloTime
		Timeout,
	snVLanByPortStpHoldTime
		Integer32,
	snVLanByPortStpForwardDelay
		Timeout,
	snVLanByPortStpTimeSinceTopologyChange
		TimeTicks,
	snVLanByPortStpTopChanges
		Counter32,
	snVLanByPortStpRootCost
		Integer32,
	snVLanByPortStpRootPort
		Integer32,
	snVLanByPortStpDesignatedRoot
		BridgeId,
	snVLanByPortBaseBridgeAddress
		MacAddress,
	snVLanByPortVLanName
		DisplayString,
	snVLanByPortRouterIntf
		Integer32,
	snVLanByPortChassisPortMask
		OCTET STRING,
	snVLanByPortPortList
		OCTET STRING
	}

snVLanByPortVLanIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The VLAN ID index must not be greater than the
		 snVLanGroupVlanMaxEntry. Each VLAN Identifier can
		 have a membership of multiple ports."
	::= { snVLanByPortEntry 1 }


snVLanByPortVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN ID index to the VLAN By Port Info Table.
		 Each VLAN Identifier can have a membership of multiple
		 ports."
	::= { snVLanByPortEntry 2 }


snVLanByPortPortMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)"
	::= { snVLanByPortEntry 3 }


snVLanByPortQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Stand alone stackable switch VLAN Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron switch VLAN Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snVLanByPortEntry 4 }

snVLanByPortStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disable(0),
		enableStp(1),
		enableRstp(2)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Spanning Tree Mode in the Switch Group can be set
		 either enabled or disabled and the default is
		 enabled mode.
		 disable(0)...........no Spanning Tree
		 enableStp(1).........activate Spanning Tree
		 enableRstp(2)........activate Rapid Spanning Tree"
	::= { snVLanByPortEntry 5 }

snVLanByPortStpPriority OBJECT-TYPE
	SYNTAX  INTEGER (0..65535)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpPriority : The value of the write-able
	 portion of the Stp ID, i.e., the first two octets
	 of the (8 octet long) Bridge ID.  The other (last) 6
	 octets of the Bridge ID are given by the value of the
	 base bridge address - dot1dBaseBridgeAddress."
	::= { snVLanByPortEntry 6 }

snVLanByPortStpGroupMaxAge OBJECT-TYPE
	SYNTAX  INTEGER (0..40)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
	 The value that all bridges use for MaxAge when
	 this bridge is acting as the root.
	 Note that 802.1D-1990 specifies that the
	 range for this parameter is related to the value of
	 dot1dStpBridgeHelloTime. The granularity of this
	 timer is specified by 802.1D-1990 to be 1 second.
	 An agent may return a badValue error if a set is
	 attempted to a value which is not a whole number
	 of seconds."
	::= { snVLanByPortEntry 7 }

snVLanByPortStpGroupHelloTime OBJECT-TYPE
	SYNTAX  INTEGER (0..10)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
	 The value that all bridges use for HelloTime when
	 this bridge is acting as the root.  The
	 granularity of this timer is specified by 802.1D-
	 1990 to be 1 second.  An agent may return a
	 badValue error if a set is attempted to a value
	 which is not a whole number of seconds."
	::= { snVLanByPortEntry 8 }

snVLanByPortStpGroupForwardDelay OBJECT-TYPE
	SYNTAX  INTEGER (0..30)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
	 The value that all bridges use for ForwardDelay
	 when this bridge is acting as the root.  Note that
	 802.1D-1990 specifies that the range for this
	 parameter is related to the value of
	 dot1dStpBridgeMaxAge.  The granularity of this
	 timer is specified by 802.1D-1990 to be 1 second.
	 An agent may return a badValue error if a set is
	 attempted to a value which is not a whole number
	 of seconds."
	::= { snVLanByPortEntry 9 }

snVLanByPortRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByPortEntry 10 }

snVLanByPortOperState OBJECT-TYPE
	SYNTAX  INTEGER {
		notActivated(0),
		activated(1)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"By default, this mode is set to notActivated(0).
		 notActivated(0)...the VLAN entry is not activated and not in running mode.
		 activated(1)......the VLAN entry is activated and in running mode"
	::= { snVLanByPortEntry 11 }

snVLanByPortBaseNumPorts OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The number of ports controlled by this bridging
	 entity."
	::= { snVLanByPortEntry 12 }

snVLanByPortBaseType OBJECT-TYPE
	SYNTAX  INTEGER {
			  unknown(1),
			  transparentOnly(2),
			  sourcerouteOnly(3),
			  srt(4)
			}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"Indicates what type of bridging this bridge can
	 perform.  If a bridge is actually performing a
	 certain type of bridging this will be indicated by
	 entries in the port table for the given type."
	::= { snVLanByPortEntry 13 }

snVLanByPortStpProtocolSpecification OBJECT-TYPE
	SYNTAX  INTEGER {
		unknown(1),
		decLb100(2),
		ieee8021d(3)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"An indication of what version of the Spanning
	 Tree Protocol is being run.  The value
	 'decLb100(2)' indicates the DEC LANbridge 100
	 Spanning Tree protocol.  IEEE 802.1d
	 implementations will return 'ieee8021d(3)'.  If
	 future versions of the IEEE Spanning Tree Protocol
	 are released that are incompatible with the
	 current version a new value will be defined."
	::= { snVLanByPortEntry 14 }


snVLanByPortStpMaxAge OBJECT-TYPE
	SYNTAX  Timeout
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpMaxAge: From RFC1493(Bridge MIB).
	 The maximum age of Spanning Tree Protocol
	 information learned from the network on any port
	 before it is discarded, in units of hundredths of
	 a second.  This is the actual value that this
	 bridge is currently using."
	::= { snVLanByPortEntry 15 }

snVLanByPortStpHelloTime OBJECT-TYPE
	SYNTAX  Timeout
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpHelloTime: From RFC1493(Bridge MIB).
	 The amount of time between the transmission of
	 Configuration bridge PDUs by this node on any port
	 when it is the root of the spanning tree or trying
	 to become so, in units of hundredths of a second.
	 This is the actual value that this bridge is
	 currently using."
	::= { snVLanByPortEntry 16 }

snVLanByPortStpHoldTime OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpHoldTime: From RFC1493(Bridge MIB).
	 This time value determines the interval length
	 during which no more than two Configuration bridge
	 PDUs shall be transmitted by this node, in units
	 of hundredths of a second."
	::= { snVLanByPortEntry 17 }

 snVLanByPortStpForwardDelay OBJECT-TYPE
	 SYNTAX  Timeout
	 MAX-ACCESS  read-only
	 STATUS  deprecated
	 DESCRIPTION
	 "dot1dStpForwardDelay: From RFC1493(Bridge MIB).
	  This time value, measured in units of hundredths
	  of a second, controls how fast a port changes its
	  spanning state when moving towards the Forwarding
	  state.  The value determines how long the port
	  stays in each of the Listening and Learning
	  states, which precede the Forwarding state.  This
	  value is also used, when a topology change has
	  been detected and is underway, to age all dynamic
	  entries in the Forwarding Database.  [Note that
	  this value is the one that this bridge is
	  currently using, in contrast to
	  dot1dStpBridgeForwardDelay which is the value that
	  this bridge and all others would start using
	  if/when this bridge were to become the root.]"
	::= { snVLanByPortEntry 18 }


snVLanByPortStpTimeSinceTopologyChange OBJECT-TYPE
	SYNTAX  TimeTicks
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The time (in hundredths of a second) since the
	 last time a topology change was detected by the
	 bridge entity."
	::= { snVLanByPortEntry 19 }

snVLanByPortStpTopChanges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The total number of topology changes detected by
	 this bridge since the management entity was last
	 reset or initialized."
	::= { snVLanByPortEntry 20 }

snVLanByPortStpRootCost OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpRootCost: From RFC1493(Bridge MIB).
	 The cost of the path to the root as seen from
	 this bridge."
	::= { snVLanByPortEntry 21 }

snVLanByPortStpRootPort OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpRootPort: From RFC1493(Bridge MIB).
	 The port number of the port which offers the
	 lowest cost path from this bridge to the root
	 bridge."
	::= { snVLanByPortEntry 22 }

snVLanByPortStpDesignatedRoot OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
	 The bridge identifier of the root of the spanning
	 tree as determined by the Spanning Tree Protocol
	 as executed by this node.  This value is used as
	 the Root Identifier parameter in all Configuration
	 Bridge PDUs originated by this node."
	::= { snVLanByPortEntry 23 }

snVLanByPortBaseBridgeAddress OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The MAC address used by this bridge when it must
	 be referred to in a unique fashion.   It is
	 recommended that this be the numerically smallest
	 MAC address of all ports that belong to this
	 bridge.  However it is only required to be unique.
	 When concatenated with dot1dStpPriority a unique
	 BridgeIdentifier is formed which is used in the
	 Spanning Tree Protocol."
	::= { snVLanByPortEntry 24 }

snVLanByPortVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	deprecated
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByPortEntry 25 }


snVLanByPortRouterIntf OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByPortEntry 26 }


snVLanByPortChassisPortMask OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN switch port membership.
		(It was obsoleted after release 07100, replaced by snVLanByPortPortList)"
	::= { snVLanByPortEntry 27 }

snVLanByPortPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"A list of port indices which are the port
		membership of a VLAN By Port. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByPortEntry 28 }


-- Port VLAN (Layer 2 VLAN) Port Membership Table
-- Use this table to create or delete a VLAN entry


snVLanByPortMemberTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortMemberEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Port VLAN (Layer 2 VLAN) port membership table."
	::= { snVLanInfo 6 }


snVLanByPortMemberEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortMemberEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the port VLAN membership table."
	INDEX   { snVLanByPortMemberVLanId, snVLanByPortMemberPortId }
	::= { snVLanByPortMemberTable 1 }

SnVLanByPortMemberEntry ::= SEQUENCE {
	snVLanByPortMemberVLanId
		INTEGER,
	snVLanByPortMemberPortId
		InterfaceIndex,
	snVLanByPortMemberRowStatus
		INTEGER,
	snVLanByPortMemberTagMode
		INTEGER
	}

snVLanByPortMemberVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN identifier (VLAN ID)."
	::= { snVLanByPortMemberEntry 1 }

snVLanByPortMemberPortId OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The ifIndex which is a member of the port VLAN."
	::= { snVLanByPortMemberEntry 2 }

snVLanByPortMemberRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByPortMemberEntry 3 }

snVLanByPortMemberTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
				tagged(1),
				untagged(2)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"For tagged/dual-mode port, we could have multiple VLANs per
		 port. For untagged port, there is only one VLAN ID per port."
	::= { snVLanByPortMemberEntry 4 }


-- Port VLAN (Layer 2 VLAN) Configuration Table
-- Use this table to configure a VLAN entry


snVLanByPortCfgTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByPortCfgEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Port VLAN (Layer 2 VLAN) configuration table."
	::= { snVLanInfo 7 }


snVLanByPortCfgEntry OBJECT-TYPE
	SYNTAX  SnVLanByPortCfgEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the port VLAN configuration table."
	INDEX   { snVLanByPortCfgVLanId }
	::= { snVLanByPortCfgTable 1 }


SnVLanByPortCfgEntry ::= SEQUENCE {
	snVLanByPortCfgVLanId
		INTEGER,
	snVLanByPortCfgQos
		PortQosTC,
	snVLanByPortCfgStpMode
		INTEGER,
	snVLanByPortCfgStpPriority
		INTEGER,
	snVLanByPortCfgStpGroupMaxAge
		Integer32,
	snVLanByPortCfgStpGroupHelloTime
		Integer32,
	snVLanByPortCfgStpGroupForwardDelay
		Integer32,
	snVLanByPortCfgBaseNumPorts
		Integer32,
	snVLanByPortCfgBaseType
		INTEGER,
	snVLanByPortCfgStpProtocolSpecification
		INTEGER,
	snVLanByPortCfgStpMaxAge
		Timeout,
	snVLanByPortCfgStpHelloTime
		Timeout,
	snVLanByPortCfgStpHoldTime
		Integer32,
	snVLanByPortCfgStpForwardDelay
		Timeout,
	snVLanByPortCfgStpTimeSinceTopologyChange
		TimeTicks,
	snVLanByPortCfgStpTopChanges
		Counter32,
	snVLanByPortCfgStpRootCost
		Integer32,
	snVLanByPortCfgStpRootPort
		Integer32,
	snVLanByPortCfgStpDesignatedRoot
		BridgeId,
	snVLanByPortCfgBaseBridgeAddress
		MacAddress,
	snVLanByPortCfgVLanName
		DisplayString,
	snVLanByPortCfgRouterIntf
		Integer32,
	snVLanByPortCfgRowStatus
		INTEGER,
	snVLanByPortCfgStpVersion
		INTEGER,
	snVLanByPortCfgInOctets
		Counter64
	}

snVLanByPortCfgVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN identifier (VLAN ID)."
	::= { snVLanByPortCfgEntry 1 }

snVLanByPortCfgQos OBJECT-TYPE
	SYNTAX  PortQosTC
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Stand alone stackable switch VLAN Priority values are:
		 level0(0)   -- low prority
		 level1(1) -- high prority.
		 The BigIron switch VLAN Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7).
		  Value invalid(127) is used by CES/CER products to signify
		that no QoS was specified for this VLAN."
	::= { snVLanByPortCfgEntry 2 }

snVLanByPortCfgStpMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disable(0),
		enableStp(1),
		enableRstp(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Spanning Tree Mode in the Switch Group can be set
		 either enabled or disabled and the default is
		 enabled mode.
		 disable(0)...........no Spanning Tree
		 enableStp(1).........activate Spanning Tree
		 enableRstp(2)........activate Rapid Spanning Tree"
	::= { snVLanByPortCfgEntry 3 }

snVLanByPortCfgStpPriority OBJECT-TYPE
	SYNTAX  INTEGER (0..65535)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"dot1dStpPriority : The value of the write-able
	 portion of the Stp ID, i.e., the first two octets
	 of the (8 octet long) Bridge ID.  The other (last) 6
	 octets of the Bridge ID are given by the value of the
	 base bridge address - dot1dBaseBridgeAddress."
	::= { snVLanByPortCfgEntry 4 }

snVLanByPortCfgStpGroupMaxAge OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
	 The value that all bridges use for MaxAge when
	 this bridge is acting as the root.
	 Note that 802.1D-1990 specifies that the
	 range for this parameter is related to the value of
	 dot1dStpBridgeHelloTime. The granularity of this
	 timer is specified by 802.1D-1990 to be 1 second.
	 An agent may return a badValue error if a set is
	 attempted to a value which is not a whole number
	 of seconds.
	   Valid value betweek 6 and 40. Default is 20 seconds.
	 Value 0 is returned if no STP is not configured for this vlan."
		::= { snVLanByPortCfgEntry 5 }

snVLanByPortCfgStpGroupHelloTime OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
	 The value that all bridges use for HelloTime when
	 this bridge is acting as the root.  The
	 granularity of this timer is specified by 802.1D-
	 1990 to be 1 second.  An agent may return a
	 badValue error if a set is attempted to a value
	 which is not a whole number of seconds.
	   Valid value betweek 1 and 10. Default is 2 seconds.
	 Value 0 is returned if no STP is not configured for this vlan."
	::= { snVLanByPortCfgEntry 6 }

snVLanByPortCfgStpGroupForwardDelay OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
	 The value that all bridges use for ForwardDelay
	 when this bridge is acting as the root.  Note that
	 802.1D-1990 specifies that the range for this
	 parameter is related to the value of
	 dot1dStpBridgeMaxAge.  The granularity of this
	 timer is specified by 802.1D-1990 to be 1 second.
	 An agent may return a badValue error if a set is
	 attempted to a value which is not a whole number
	 of seconds.
	   Valid value betweek 2 and 30. Default is 15 seconds.
	 Value 0 is returned if no STP is not configured for this vlan."
	::= { snVLanByPortCfgEntry 7 }

snVLanByPortCfgBaseNumPorts OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The number of ports controlled by this bridging
	 entity."
	::= { snVLanByPortCfgEntry 8 }

snVLanByPortCfgBaseType OBJECT-TYPE
	SYNTAX  INTEGER {
			  unknown(1),
			  transparentOnly(2),
			  sourcerouteOnly(3),
			  srt(4)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"Indicates what type of bridging this bridge can
	 perform.  If a bridge is actually performing a
	 certain type of bridging this will be indicated by
	 entries in the port table for the given type."
	::= { snVLanByPortCfgEntry 9 }

snVLanByPortCfgStpProtocolSpecification OBJECT-TYPE
	SYNTAX  INTEGER {
		unknown(1),
		decLb100(2),
		ieee8021d(3)
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"An indication of what version of the Spanning
	 Tree Protocol is being run.  The value
	 'decLb100(2)' indicates the DEC LANbridge 100
	 Spanning Tree protocol.  IEEE 802.1d
	 implementations will return 'ieee8021d(3)'.  If
	 future versions of the IEEE Spanning Tree Protocol
	 are released that are incompatible with the
	 current version a new value will be defined."
	::= { snVLanByPortCfgEntry 10 }


snVLanByPortCfgStpMaxAge OBJECT-TYPE
	SYNTAX  Timeout
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpMaxAge: From RFC1493(Bridge MIB).
	 The maximum age of Spanning Tree Protocol
	 information learned from the network on any port
	 before it is discarded, in units of hundredths of
	 a second.  This is the actual value that this
	 bridge is currently using."
	::= { snVLanByPortCfgEntry 11 }

snVLanByPortCfgStpHelloTime OBJECT-TYPE
	SYNTAX  Timeout
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpHelloTime: From RFC1493(Bridge MIB).
	 The amount of time between the transmission of
	 Configuration bridge PDUs by this node on any port
	 when it is the root of the spanning tree or trying
	 to become so, in units of hundredths of a second.
	 This is the actual value that this bridge is
	 currently using."
	::= { snVLanByPortCfgEntry 12 }

snVLanByPortCfgStpHoldTime OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpHoldTime: From RFC1493(Bridge MIB).
	 This time value determines the interval length
	 during which no more than two Configuration bridge
	 PDUs shall be transmitted by this node, in units
	 of hundredths of a second."
	::= { snVLanByPortCfgEntry 13 }

 snVLanByPortCfgStpForwardDelay OBJECT-TYPE
	 SYNTAX  Timeout
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
	 "dot1dStpForwardDelay: From RFC1493(Bridge MIB).
	  This time value, measured in units of hundredths
	  of a second, controls how fast a port changes its
	  spanning state when moving towards the Forwarding
	  state.  The value determines how long the port
	  stays in each of the Listening and Learning
	  states, which precede the Forwarding state.  This
	  value is also used, when a topology change has
	  been detected and is underway, to age all dynamic
	  entries in the Forwarding Database.  [Note that
	  this value is the one that this bridge is
	  currently using, in contrast to
	  dot1dStpBridgeForwardDelay which is the value that
	  this bridge and all others would start using
	  if/when this bridge were to become the root.]"
	::= { snVLanByPortCfgEntry 14 }


snVLanByPortCfgStpTimeSinceTopologyChange OBJECT-TYPE
	SYNTAX  TimeTicks
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The time (in hundredths of a second) since the
	 last time a topology change was detected by the
	 bridge entity."
	::= { snVLanByPortCfgEntry 15 }

snVLanByPortCfgStpTopChanges OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The total number of topology changes detected by
	 this bridge since the management entity was last
	 reset or initialized."
	::= { snVLanByPortCfgEntry 16 }

snVLanByPortCfgStpRootCost OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpRootCost: From RFC1493(Bridge MIB).
	 The cost of the path to the root as seen from
	 this bridge."
	::= { snVLanByPortCfgEntry 17 }

snVLanByPortCfgStpRootPort OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpRootPort: From RFC1493(Bridge MIB).
	 The port number of the port which offers the
	 lowest cost path from this bridge to the root
	 bridge."
	::= { snVLanByPortCfgEntry 18 }

snVLanByPortCfgStpDesignatedRoot OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
	 The bridge identifier of the root of the spanning
	 tree as determined by the Spanning Tree Protocol
	 as executed by this node.  This value is used as
	 the Root Identifier parameter in all Configuration
	 Bridge PDUs originated by this node."
	::= { snVLanByPortCfgEntry 19 }

snVLanByPortCfgBaseBridgeAddress OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The MAC address used by this bridge when it must
	 be referred to in a unique fashion.   It is
	 recommended that this be the numerically smallest
	 MAC address of all ports that belong to this
	 bridge.  However it is only required to be unique.
	 When concatenated with dot1dStpPriority a unique
	 BridgeIdentifier is formed which is used in the
	 Spanning Tree Protocol."
	::= { snVLanByPortCfgEntry 20 }

snVLanByPortCfgVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByPortCfgEntry 21 }


snVLanByPortCfgRouterIntf OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByPortCfgEntry 22 }

snVLanByPortCfgRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Use this object to delete a vlan entry.
		 For read operation, its value is 'valid' if it is a user-configured VLAN and
		 'other' if it is a control-VLAN."
	::= { snVLanByPortCfgEntry 23 }

snVLanByPortCfgStpVersion OBJECT-TYPE
	SYNTAX  INTEGER {
		stpCompatible(0),
		rstp(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The version of Spanning Tree Protocol the bridge is
		 currently running.  The value 'stpCompatible(0)'
		 indicates the Spanning Tree Protocol specified in
		 IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
		 Tree Protocol specified in IEEE 802.1w.  New value may
		 be defined as future versions of the protocol become
		 available."
	::= { snVLanByPortCfgEntry 24 }

snVLanByPortCfgInOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of bytes received on this VLAN. This can be used as the per VE
		 couter, if there is one-to-one map for VLAN-VE."
	::= { snVLanByPortCfgEntry 25 }


--
--

brcdVlanExtStatsTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF BrcdVlanExtStatsEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains the extended statistics for VLAN ports of G2 cards.
		 These applies to L2 VLANs and as well as port VLANs that are associated to
 		 IP interfaces (physical or VE)."
	::= { snVLanInfo 8 }

brcdVlanExtStatsEntry OBJECT-TYPE
	SYNTAX  BrcdVlanExtStatsEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A row in this table represents a VLAN extended statistics
 accounting entry. It can be a per-VLAN/port entry,
 in this case the Priority-ID is 128 (invalid).
 It can also be in a priority level granularity of the VLAN port,
 in this case the Priority-ID specifies which port QOS priority,
 and Priority-ID 128 is the index to the aggregate count bucket."
	INDEX	{brcdVlanExtStatsVlanId,
           brcdVlanExtStatsIfIndex,
           brcdVlanExtStatsPriorityId }
	::= { brcdVlanExtStatsTable 1 }

BrcdVlanExtStatsEntry ::= SEQUENCE {
	brcdVlanExtStatsVlanId
		BrcdVlanIdTC,
	brcdVlanExtStatsIfIndex
		InterfaceIndex,
	brcdVlanExtStatsPriorityId
		PortPriorityTC,
	brcdVlanExtStatsInSwitchedPkts
		Counter64,
	brcdVlanExtStatsInRoutedPkts
		Counter64,
	brcdVlanExtStatsInPkts
		Counter64,
	brcdVlanExtStatsOutSwitchedPkts
		Counter64,
	brcdVlanExtStatsOutRoutedPkts
		Counter64,
	brcdVlanExtStatsOutPkts
		Counter64,
	brcdVlanExtStatsInSwitchedOctets
		Counter64,
	brcdVlanExtStatsInRoutedOctets
		Counter64,
	brcdVlanExtStatsInOctets
		Counter64,
	brcdVlanExtStatsOutSwitchedOctets
		Counter64,
	brcdVlanExtStatsOutRoutedOctets
		Counter64,
	brcdVlanExtStatsOutOctets
		Counter64
	}

brcdVlanExtStatsVlanId OBJECT-TYPE
	SYNTAX  BrcdVlanIdTC
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The VLAN identifier (VLAN ID)."
	::= { brcdVlanExtStatsEntry 1 }

brcdVlanExtStatsIfIndex OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"The ifIndex of the port belonging to this VLAN."
	::= { brcdVlanExtStatsEntry 2 }

brcdVlanExtStatsPriorityId OBJECT-TYPE
	SYNTAX  PortPriorityTC
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Identifies the port QOS priority.
       The values 1 through 8 internally maps to priorities 0 through 7.
       The value 128 indicates that priority-level accounting is not enabled"
	::= { brcdVlanExtStatsEntry 3 }

brcdVlanExtStatsInSwitchedPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of valid frames received by this port classified as belonging
to this VLAN for switched packets. The value is applicable only if the
system was configured to separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 4 }

brcdVlanExtStatsInRoutedPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		" The number of valid frames received by this port classified as belonging
to this VLAN for routed packets. The value is applicable only if the system
was configured to separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 5 }

brcdVlanExtStatsInPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of valid frames received by this port classified as belonging
to this VLAN for both switched and routed packets."
	::= { brcdVlanExtStatsEntry 6 }

brcdVlanExtStatsOutSwitchedPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of valid frames transmitted by this port
 classified as belonging to this VLAN for switched packets.
 The value is applicable only if the system was configured
 to separately count the two types of packets.
 Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 7 }

brcdVlanExtStatsOutRoutedPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of valid frames transmitted by this port classified
 as belonging to this VLAN for routed packets. The value is
 applicable only if the system was configured to separately
 count the two types of packets. Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 8 }

brcdVlanExtStatsOutPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of valid frames transmitted by this port classified
 as belonging to this VLAN for both switched and routed packets."
	::= { brcdVlanExtStatsEntry 9 }

brcdVlanExtStatsInSwitchedOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count received by this port classified as
belonging to this VLAN for switched packets. The value
is applicable only if the system was configured to
separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 10 }

brcdVlanExtStatsInRoutedOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count received by this port classified as
belonging to this VLAN for routed packets. The value
is applicable only if the system was configured to
separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 11 }

brcdVlanExtStatsInOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count received by this port classified
as belonging to this VLAN for both switched and
routed packets. "
	::= { brcdVlanExtStatsEntry 12 }

brcdVlanExtStatsOutSwitchedOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count transmitted by this port classified
as belonging to this VLAN for switched packets.
The value is applicable only if the system was configured
to separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 13 }

brcdVlanExtStatsOutRoutedOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count transmitted by this port classified
as belonging to this VLAN for routed packets.
The value is applicable only if the system was configured
to separately count the two types of packets.
Otherwise, it returns 0."
	::= { brcdVlanExtStatsEntry 14 }

brcdVlanExtStatsOutOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The bytes count transmitted by this port classified
as belonging to this VLAN for both switched and
routed packets. "
	::= { brcdVlanExtStatsEntry 15 }


-- VLAN by Protocol Configuration Table


snVLanByProtocolTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByProtocolEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"."
	::= { snVLanInfo 2 }


snVLanByProtocolEntry OBJECT-TYPE
	SYNTAX  SnVLanByProtocolEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the VLAN By Protocol Configuration table. "
	INDEX   {
		snVLanByProtocolVLanId,
		snVLanByProtocolIndex
	}
	::= { snVLanByProtocolTable 1 }


SnVLanByProtocolEntry ::= SEQUENCE {
	snVLanByProtocolVLanId
		INTEGER,
	snVLanByProtocolIndex
		INTEGER,
	snVLanByProtocolDynamic
		INTEGER,
	snVLanByProtocolStaticMask
		PortMask,
	snVLanByProtocolExcludeMask
		PortMask,
	snVLanByProtocolRouterIntf
		INTEGER,
	snVLanByProtocolRowStatus
		INTEGER,
	snVLanByProtocolDynamicMask
		PortMask,
	snVLanByProtocolChassisStaticMask
		OCTET STRING,
	snVLanByProtocolChassisExcludeMask
		OCTET STRING,
	snVLanByProtocolChassisDynamicMask
		OCTET STRING,
	snVLanByProtocolVLanName
		DisplayString,
	snVLanByProtocolStaticPortList
		OCTET STRING,
	snVLanByProtocolExcludePortList
		OCTET STRING,
	snVLanByProtocolDynamicPortList
		OCTET STRING
	}

snVLanByProtocolVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByProtocolEntry 1 }


snVLanByProtocolIndex OBJECT-TYPE
	SYNTAX  INTEGER {
		ip(1),
		ipx(2),
		appleTalk(3),
		decNet(4),
		netBios(5),
		others(6),
		ipv6(7)
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		" The following IP/IPX protocol VLAN types are operated
		in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
		The following are operated in Layer2 bridging such as:
		appleTalk(3), decNet(4), netBios(5),
		others(6) -- other protocols which are defined here. "
	::= { snVLanByProtocolEntry 2 }

snVLanByProtocolDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByProtocolEntry 3 }

snVLanByProtocolStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 4 }

snVLanByProtocolExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 5 }

snVLanByProtocolRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByProtocolEntry 6 }

snVLanByProtocolRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByProtocolEntry 7 }

snVLanByProtocolDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch Protocol VLAN active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByProtocolEntry 8 }

snVLanByProtocolChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)"
	::= { snVLanByProtocolEntry 9 }

snVLanByProtocolChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)"
	::= { snVLanByProtocolEntry 10 }

snVLanByProtocolChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis Protocol VLAN active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)"
	::= { snVLanByProtocolEntry 11 }

snVLanByProtocolVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByProtocolEntry 12 }

snVLanByProtocolStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 13 }

snVLanByProtocolExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 14 }

snVLanByProtocolDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the Protocol VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByProtocolEntry 15 }


-- VLAN By IP Subnet Configuration Table


snVLanByIpSubnetTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByIpSubnetEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the VLAN By IPX Network Number Table."
	::= { snVLanInfo 3 }


snVLanByIpSubnetEntry OBJECT-TYPE
	SYNTAX  SnVLanByIpSubnetEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the VLAN By IP Subnet Configuration table. "
	INDEX   {
		snVLanByIpSubnetVLanId,
		snVLanByIpSubnetIpAddress,
		snVLanByIpSubnetSubnetMask
	}
	::= { snVLanByIpSubnetTable 1 }


SnVLanByIpSubnetEntry ::= SEQUENCE {
	snVLanByIpSubnetVLanId
		INTEGER,
	snVLanByIpSubnetIpAddress
		IpAddress,
	snVLanByIpSubnetSubnetMask
		IpAddress,
	snVLanByIpSubnetDynamic
		INTEGER,
	snVLanByIpSubnetStaticMask
		PortMask,
	snVLanByIpSubnetExcludeMask
		PortMask,
	snVLanByIpSubnetRouterIntf
		INTEGER,
	snVLanByIpSubnetRowStatus
		INTEGER,
	snVLanByIpSubnetDynamicMask
		PortMask,
	snVLanByIpSubnetChassisStaticMask
		OCTET STRING,
	snVLanByIpSubnetChassisExcludeMask
		OCTET STRING,
	snVLanByIpSubnetChassisDynamicMask
		OCTET STRING,
	snVLanByIpSubnetVLanName
		DisplayString,
	snVLanByIpSubnetStaticPortList
		OCTET STRING,
	snVLanByIpSubnetExcludePortList
		OCTET STRING,
	snVLanByIpSubnetDynamicPortList
		OCTET STRING
	}

snVLanByIpSubnetVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByIpSubnetEntry 1 }


snVLanByIpSubnetIpAddress OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Subnet IP address."
	::= { snVLanByIpSubnetEntry 2 }

snVLanByIpSubnetSubnetMask OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Subnet mask associated with the Subnet IP address."
	::= { snVLanByIpSubnetEntry 3 }

snVLanByIpSubnetDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByIpSubnetEntry 4 }

snVLanByIpSubnetStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 5 }

snVLanByIpSubnetExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 6 }

snVLanByIpSubnetRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByIpSubnetEntry 7 }


snVLanByIpSubnetRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByIpSubnetEntry 8 }

snVLanByIpSubnetDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Standand-alone switch VLAN By Subnet active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpSubnetEntry 9 }

snVLanByIpSubnetChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)"
	::= { snVLanByIpSubnetEntry 10 }

snVLanByIpSubnetChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)"
	::= { snVLanByIpSubnetEntry 11 }

snVLanByIpSubnetChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By Subnet active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)"
	::= { snVLanByIpSubnetEntry 12 }

snVLanByIpSubnetVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByIpSubnetEntry 13 }

snVLanByIpSubnetStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 14 }

snVLanByIpSubnetExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 15 }

snVLanByIpSubnetDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the VLAN By IP Subnet. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpSubnetEntry 16 }


-- VLAN By IPX Net Configuration Table


snVLanByIpxNetTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByIpxNetEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the VLAN By IPX Network Number Table."
	::= { snVLanInfo 4 }


snVLanByIpxNetEntry OBJECT-TYPE
	SYNTAX  SnVLanByIpxNetEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the VLAN By Ipx Network Number Configuration table. "
	INDEX   {
		snVLanByIpxNetVLanId,
		snVLanByIpxNetNetworkNum,
		snVLanByIpxNetFrameType
	}
	::= { snVLanByIpxNetTable 1 }


SnVLanByIpxNetEntry ::= SEQUENCE {
	snVLanByIpxNetVLanId
		INTEGER,
	snVLanByIpxNetNetworkNum
		OCTET STRING,
	snVLanByIpxNetFrameType
		INTEGER,
	snVLanByIpxNetDynamic
		INTEGER,
	snVLanByIpxNetStaticMask
		PortMask,
	snVLanByIpxNetExcludeMask
		PortMask,
	snVLanByIpxNetRouterIntf
		INTEGER,
	snVLanByIpxNetRowStatus
		INTEGER,
	snVLanByIpxNetDynamicMask
		PortMask,
	snVLanByIpxNetChassisStaticMask
		OCTET STRING,
	snVLanByIpxNetChassisExcludeMask
		OCTET STRING,
	snVLanByIpxNetChassisDynamicMask
		OCTET STRING,
	snVLanByIpxNetVLanName
		DisplayString,
	snVLanByIpxNetStaticPortList
		OCTET STRING,
	snVLanByIpxNetExcludePortList
		OCTET STRING,
	snVLanByIpxNetDynamicPortList
		OCTET STRING
	}

snVLanByIpxNetVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID index to both of the VLAN By Port Info Table
		 and this table."
	::= { snVLanByIpxNetEntry 1 }


snVLanByIpxNetNetworkNum OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(4))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"IPX Network Number."
	::= { snVLanByIpxNetEntry 2 }

snVLanByIpxNetFrameType OBJECT-TYPE
	SYNTAX  INTEGER {
		notApplicable(0),
		ipxEthernet8022(1),
		ipxEthernet8023(2),
		ipxEthernetII(3),
		ipxEthernetSnap(4)
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		" The following IPX Frame types are operated
		in Layer3 VLAN such as :
		ipxEthernet8022(1), ipxEthernet8023(2),
		ipxEthernetII(3), ipxEthernetSnap(4).
		choose notApplicable(0) for other protocols.
		Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
		a SNMP-SET error will be returned."
	::= { snVLanByIpxNetEntry 3 }

snVLanByIpxNetDynamic OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		" disabled(0) : disabled dynamic port inclusion - applied to switch only.
		  enabled(1) : enabled dynamic port inclusion - applied to switch only. "
	::= { snVLanByIpxNetEntry 4 }

snVLanByIpxNetStaticMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network port membership applied in static mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 5 }

snVLanByIpxNetExcludeMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network port membership applied in exclusive mode.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 6 }


snVLanByIpxNetRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Optional: A virtual interface for router to the VLAN -- applied to router only.
		 If a SNMP-Get value is zero, that means this object was not configured."
	::= { snVLanByIpxNetEntry 7 }


snVLanByIpxNetRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByIpxNetEntry 8 }

snVLanByIpxNetDynamicMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The VLAN By IPX network active port membership.
		(It was obsoleted for Chassis Product)"
	::= { snVLanByIpxNetEntry 9 }

snVLanByIpxNetChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network port membership applied in static mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)"
	::= { snVLanByIpxNetEntry 10 }

snVLanByIpxNetChassisExcludeMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network port membership applied in exclusive mode.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)"
	::= { snVLanByIpxNetEntry 11 }

snVLanByIpxNetChassisDynamicMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The Chassis VLAN By IPX network active port membership.
		(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)"
	::= { snVLanByIpxNetEntry 12 }

snVLanByIpxNetVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"VLAN Community Name string."
	::= { snVLanByIpxNetEntry 13 }

snVLanByIpxNetStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 14 }

snVLanByIpxNetExcludePortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the excluded from port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 15 }

snVLanByIpxNetDynamicPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A list of port indices which are dynamically joining the port
		membership of the VLAN By IPX network. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByIpxNetEntry 16 }


-- VLAN By AppleTalk Cable Configuration Table


snVLanByATCableTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanByATCableEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A Table Of VLAN By AppleTalk Network Number."
	::= { snVLanInfo 5 }

snVLanByATCableEntry OBJECT-TYPE
	SYNTAX  SnVLanByATCableEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the AppleTalk Cable VLAN table."
	INDEX   {snVLanByATCableVLanId, snVLanByATCableIndex}
	::= { snVLanByATCableTable 1 }

SnVLanByATCableEntry ::= SEQUENCE {
	snVLanByATCableVLanId
		INTEGER,
	snVLanByATCableIndex
		Integer32,
	snVLanByATCableRouterIntf
		INTEGER,
	snVLanByATCableRowStatus
		INTEGER,
	snVLanByATCableChassisStaticMask
		OCTET STRING,
	snVLanByATCableVLanName
		DisplayString,
	snVLanByATCableStaticPortList
		OCTET STRING
	}

snVLanByATCableVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID of a PORT VLAN of which the AppleTalk Cable
		VLAN was attaching to."
	::= { snVLanByATCableEntry 1 }

snVLanByATCableIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"AppleTalk Cable VLAN index number."
	::= { snVLanByATCableEntry 2 }

snVLanByATCableRouterIntf OBJECT-TYPE
	SYNTAX  INTEGER (0..60)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A virtual router interface to the AppleTalk Cable VLAN,
		only router products accept the SNMP-SET operation. The
		value zero indicates that virtual router interface was
		not configured."
	::= { snVLanByATCableEntry 3 }

snVLanByATCableRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row
		  modify(5)...modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snVLanByATCableEntry 4 }

snVLanByATCableChassisStaticMask OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(32))
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"A list of ports which are statically configured to
		become port members of a VLAN.
		(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)"
	::= { snVLanByATCableEntry 5 }

snVLanByATCableVLanName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"VLAN Name string."
	::= { snVLanByATCableEntry 6 }

snVLanByATCableStaticPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the configured port
		membership of the AppleTalk Cable VLAN. Each port index is a
		16-bit integer in big endian order. 8-bit is the slot number,
		the other 8-bit is the port number."
	::= { snVLanByATCableEntry 7 }




-- Switch Port Information Group

-- begin of deprecated snSwPortInfoTable
snSwPortInfoTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnSwPortInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"A specific snSwPortInfo group consists of a number of
		 switch ports.  "
	::= { snSwPortInfo 1 }

snSwPortInfoEntry OBJECT-TYPE
	SYNTAX  SnSwPortInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"An entry in the snSwPortInfo table indicates the
		 configuration on a specified port. A SNMP SET PDU
		 for a row of the snSwPortInfoTable requires the entired
		 sequence of the MIB Objects in each
		 snSwPortInfoEntry stored in one PDU.  Otherwise,
		 GENERR return-value will be returned."
	INDEX   {
		snSwPortInfoPortNum
	}
	::= { snSwPortInfoTable 1 }

SnSwPortInfoEntry ::= SEQUENCE {
	snSwPortInfoPortNum
		Integer32,
	snSwPortInfoMonitorMode
		INTEGER,
	snSwPortInfoTagMode
		INTEGER,
	snSwPortInfoChnMode
		INTEGER,
	snSwPortInfoSpeed
		INTEGER,
	snSwPortInfoMediaType
		INTEGER,
	snSwPortInfoConnectorType
		INTEGER,
	snSwPortInfoAdminStatus
		INTEGER,
	snSwPortInfoLinkStatus
		INTEGER,
	snSwPortInfoPortQos
		INTEGER,
	snSwPortInfoPhysAddress
		PhysAddress,
	snSwPortStatsInFrames
		Counter32,
	snSwPortStatsOutFrames
		Counter32,
	snSwPortStatsAlignErrors
		Counter32,
	snSwPortStatsFCSErrors
		Counter32,
	snSwPortStatsMultiColliFrames
		Counter32,
	snSwPortStatsFrameTooLongs
		Counter32,
	snSwPortStatsTxColliFrames
		Counter32,
	snSwPortStatsRxColliFrames
		Counter32,
	snSwPortStatsFrameTooShorts
		Counter32,
	snSwPortLockAddressCount
		INTEGER,
	snSwPortStpPortEnable
		INTEGER,
	snSwPortDhcpGateListId
		INTEGER,
	snSwPortName
		DisplayString,
	snSwPortStatsInBcastFrames
		Counter32,
	snSwPortStatsOutBcastFrames
		Counter32,
	snSwPortStatsInMcastFrames
		Counter32,
	snSwPortStatsOutMcastFrames
		Counter32,
	snSwPortStatsInDiscard
		Counter32,
	snSwPortStatsOutDiscard
		Counter32,
	snSwPortStatsMacStations
		Integer32,
	snSwPortCacheGroupId
		Integer32,
	snSwPortTransGroupId
		Integer32,
	snSwPortInfoAutoNegotiate
		INTEGER,
	snSwPortInfoFlowControl
		INTEGER,
	snSwPortInfoGigType
		INTEGER,
	snSwPortStatsLinkChange
		Counter32,
	snSwPortIfIndex
		Integer32,
	snSwPortDescr
		DisplayString,
	snSwPortInOctets
		OCTET STRING,
	snSwPortOutOctets
		OCTET STRING,
	snSwPortStatsInBitsPerSec
		Gauge32,
	snSwPortStatsOutBitsPerSec
		Gauge32,
	snSwPortStatsInPktsPerSec
		Gauge32,
	snSwPortStatsOutPktsPerSec
		Gauge32,
	snSwPortStatsInUtilization
		INTEGER ,
	snSwPortStatsOutUtilization
		INTEGER ,
	snSwPortFastSpanPortEnable
		INTEGER,
	snSwPortFastSpanUplinkEnable
		INTEGER,
	snSwPortVlanId
		INTEGER,
	snSwPortRouteOnly
		INTEGER,
	snSwPortPresent
		INTEGER,
	snSwPortGBICStatus
		INTEGER,
	snSwPortStatsInKiloBitsPerSec
		Unsigned32,
	snSwPortStatsOutKiloBitsPerSec
		Unsigned32,
	snSwPortLoadInterval
		INTEGER,
	snSwPortTagType
		Integer32 ,
	snSwPortInLinePowerControl
		INTEGER,
	snSwPortInLinePowerWattage
		Integer32 ,
	snSwPortInLinePowerClass
		INTEGER,
	snSwPortInLinePowerPriority
		INTEGER,
	snSwPortInfoMirrorMode
		INTEGER,
	snSwPortStatsInJumboFrames
		Counter64,
	snSwPortStatsOutJumboFrames
		Counter64,
	snSwPortInLinePowerConsumed
		Integer32,
	snSwPortInLinePowerPDType
		DisplayString
	}

snSwPortInfoPortNum OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The port index.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snSwPortInfoEntry 1 }


snSwPortInfoMonitorMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		input(1),
		output(2),
		both(3)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"DEPRECATED by snSwPortInfoMirrorMode and
		snPortMonitorTable."
	::= { snSwPortInfoEntry 2 }


snSwPortInfoTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
		tagged(1),
		untagged(2),
		auto(3),
		disabled(4)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"For tagged port, we could have multiple VLANs
		 per port. For untagged port or auto port, there
		 is only one VLAN ID per port."
	::= { snSwPortInfoEntry 3 }


snSwPortInfoChnMode OBJECT-TYPE
	SYNTAX  INTEGER {
		none(0),
		halfDuplex(1),
		fullDuplex(2)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The port can be configured to operate in either
		half or full duplex mode. The values are:
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode
		The read-back channel status from hardware are:
			none(0).........link down or port disabled.
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode

		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		value of this object.
		The port can not set to half duplex mode
		if the port connect mode is m200e(4).
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwPortInfoEntry 4 }


snSwPortInfoSpeed OBJECT-TYPE
	SYNTAX  INTEGER {
		none(0),
		sAutoSense(1),
		s10M(2),
		s100M(3),
		s1G(4),
		s1GM(5),
		s155M(6),
		s10G(7),
		s622M(8),
		s2488M(9),
		s9953M(10),
		s16G(11)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The speed configuration for a port. The values are:
		  none(0)..........link down or no traffic.
		  sAutoSense(1)....Auto-sensing 10 or 100Mbits.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s1GM(5)..........1Gbits per second master.
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.
		  s622M(8).........OC12 - 622Mbits per second
		  s2488M(9)........OC48 - 2.488Gbits per second
		  s9953M(10).......OC192 - 9.953Gbits per second
		  s16G(11)..........16Gbits per second.

		 The read-back hardware status are the following:
		  none(0)..........link down or no traffic.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s1GM(5)..........1Gbits per second master.
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.
		  s622M(8).........OC12 - 622Mbits per second
		  s2488M(9)........OC48 - 2.488Gbits per second
		  s9953M(10).......OC192 - 9.953Gbits per second
		  s16G(11)..........16Gbits per second.

		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		whether this object can be written and the valid
		values.
		It is not allowed to change speed for trunks ports.
		For expansion ports, all of the above speed
		can be set.
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwPortInfoEntry 5 }



snSwPortInfoMediaType OBJECT-TYPE
	SYNTAX  INTEGER {
			other(1),
		m100BaseTX(2),
		m100BaseFX(3),
		m1000BaseFX(4),
		mT3(5),
		m155ATM(6),
		m1000BaseTX(7),
		m622ATM(8),
		m155POS(9),
		m622POS(10),
		m2488POS(11),
		m10000BaseFX(12),
		m9953POS(13),
		m16GStacking(14)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The media type for the port. The
		values are:
		  other(1).........other or unknown media.
		  m100BaseTX(2)....100Mbits per second copper.
		  m100BaseFX(3)....100Mbits per second fiber.
		  m1000BaseFX(4)...1Gbits per second fiber.
		  mT3(5)...........45Mbits per second (T3).
		  m155ATM(6).......155Mbits per second (ATM).
		  m1000BaseTX(7)...1Gbits per second copper.
		  m622ATM(8).......622Mbits per second (ATM).
		  m155POS(9).......155Mbits per second (POS).
		  m622POS(10)......622Mbits per second (POS).
		  m2488POS(11).....2488Mbits per second (POS).
		  m10000BaseFX(12).10Gbits per second fiber.
		  m9953POS(13).....9953Mbits per second (POS).
		  m16GStacking(14).16Gbits per second fiber."
	::= { snSwPortInfoEntry 6 }



snSwPortInfoConnectorType OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		copper(2),
		fiber(3)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The type of connector that the port offers.
		 The values are:
		  other(1)...........other or unknown connector
		  copper(2)..........Copper connector
		  fiber(3)...........Fiber connector
		 This describes the physical connector type"
	::= { snSwPortInfoEntry 7 }


snSwPortInfoAdminStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The desired state of all ports.  The
		testing(3) state indicates that no operational
		packets can be passed.
		(same as ifAdminStatus in MIB-II)"
	::= { snSwPortInfoEntry 8 }


snSwPortInfoLinkStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The current operational state of the interface.
		 The testing(3) state indicates that no operational
		 packets can be passed.
		 (same as ifOperStatus in MIB-II)"
	::= { snSwPortInfoEntry 9 }


snSwPortInfoPortQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The Stand alone stackable switch Port Qos Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron Port Qos Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snSwPortInfoEntry 10 }


snSwPortInfoPhysAddress OBJECT-TYPE
	SYNTAX  PhysAddress
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The port physical address. The physical address
		represents the switch port."
	::= { snSwPortInfoEntry 11 }



snSwPortStatsInFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of packets received on the interface."
	::= { snSwPortInfoEntry 12 }


snSwPortStatsOutFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of packets transmitted out of the interface."
	::= { snSwPortInfoEntry 13 }


snSwPortStatsAlignErrors   OBJECT-TYPE
	 SYNTAX     Counter32
	 MAX-ACCESS     read-only
	 STATUS     deprecated
	 DESCRIPTION
		"dot3StatsAlignmentErrors : A count of frames
		received on a particular interface that are
		not an integral number of octets in length
		and do not pass the FCS check.

		The count represented by an instance of this
		object is incremented when the alignmentError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwPortInfoEntry 14 }

snSwPortStatsFCSErrors   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      deprecated
	 DESCRIPTION
		"dot3StatsFCSErrors : A count of frames received
		on a particular interface that are an integral
		number of octets in length but do not pass the
		FCS check.

		The count represented by an instance of this
		object is incremented when the frameCheckError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwPortInfoEntry 15 }


snSwPortStatsMultiColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      deprecated
	 DESCRIPTION
		"dot3StatsMultipleCollisionFrames :
		A count of successfully transmitted frames on
		a particular interface for which transmission
		is inhibited by more than one collision.

		A frame that is counted by an instance of this
		object is also counted by the corresponding
		instance of either the ifOutUcastPkts,
		ifOutMulticastPkts, or ifOutBroadcastPkts,
		and is not counted by the corresponding
		instance of the dot3StatsSingleCollisionFrames
		object."
	::= { snSwPortInfoEntry 16 }


snSwPortStatsFrameTooLongs   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    deprecated
	 DESCRIPTION
		"dot3StatsFrameTooLongs : A count of frames
		received on a particular interface that
		exceed the maximum permitted frame size.

		The count represented by an instance of this
		object is incremented when the frameTooLong
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwPortInfoEntry 17 }


snSwPortStatsTxColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      deprecated
	 DESCRIPTION
		"A count of successfully transmitted frames on
		a particular interface for which transmission
		is inhibited by more than one collision.

		A frame that is counted by a combination of
		both dot3StatsSingleCollisionFrames and
		dot3StatsMultipleCollisionFrames objects."
	::= { snSwPortInfoEntry 18 }

snSwPortStatsRxColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      deprecated
	 DESCRIPTION
		"A count of successfully received frames on
		a particular interface for which transmission
		is inhibited by more than one collision.  This
		object is not specified in dot3 but it has the
		same functionarity as snSwPortStatsTxColliFrames."
	::= { snSwPortInfoEntry 19 }

snSwPortStatsFrameTooShorts   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    deprecated
	 DESCRIPTION
		" A count of frames received on a particular
		interface that below the minimum permitted
		frame size."
	::= { snSwPortInfoEntry 20 }

snSwPortLockAddressCount OBJECT-TYPE
	 SYNTAX  INTEGER (0..2048)
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The number of source MAC addresses are allowed
		for a port. Writing 0 to this object will allow
		any number of addresses."
	DEFVAL { 8 }
	::= { snSwPortInfoEntry 21 }

snSwPortStpPortEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
			   disabled(0),
			   enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The enabled/disabled status of the port."
	 REFERENCE
		"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
	 ::= { snSwPortInfoEntry 22 }

snSwPortDhcpGateListId OBJECT-TYPE
	SYNTAX  INTEGER (0..32)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"The ID for a DHCP gateway list entry relative
		 to this switch port. 0 = unset or no assigned ID"
	::= { snSwPortInfoEntry 23 }

snSwPortName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..255))
	MAX-ACCESS	read-write
	STATUS	deprecated
	DESCRIPTION
		"Port Name string."
	::= { snSwPortInfoEntry 24 }

snSwPortStatsInBcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of broadcast packets received on the interface."
	::= { snSwPortInfoEntry 25 }


snSwPortStatsOutBcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of broadcast packets transmitted out of the interface."
	::= { snSwPortInfoEntry 26 }

snSwPortStatsInMcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of multicast packets received on the interface."
	::= { snSwPortInfoEntry 27 }


snSwPortStatsOutMcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of multicast packets transmitted out of the interface."
	::= { snSwPortInfoEntry 28 }


snSwPortStatsInDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of inbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being deliverable to a
		 higher-layer protocol.  One possible reason for
		 discarding such a packet could be to free up
		 buffer space."
	::= { snSwPortInfoEntry 29 }


snSwPortStatsOutDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of outbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being transmitted.  One
		 possible reason for discarding such a packet could
		 be to free up buffer space."
	::= { snSwPortInfoEntry 30 }

snSwPortStatsMacStations OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of MAC Stations connected to the interface."
	::= { snSwPortInfoEntry 31 }


snSwPortCacheGroupId OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Cache Group ID for the interface."
	::= { snSwPortInfoEntry 32 }

snSwPortTransGroupId OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Transparent Group ID for the interface."
	::= { snSwPortInfoEntry 33 }

snSwPortInfoAutoNegotiate OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1),
		negFullAuto(2),
		global(3),
		other(4)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"This feature only applies to Gigabit Ethernet ports. If set to
		disable(0), port will be put to non-negotiation mode. If set to
		enable(1), port will start auto-negotiation indefinitely until
		succeed. If set to negFullAuto(2), the port will start with auto-
		negotiation, if the negotiation failed, then it will automatically
		switch to non-negotiation mode. Stackable products (except TurboIron
		8) Gigabit Ethernet ports do not support negFullAuto(2). If set
		to global(3), port negotiation mode follows the value of
		snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
		the value other(4)."
	DEFVAL { global }
	::= { snSwPortInfoEntry 34 }


snSwPortInfoFlowControl OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"Enable/Disbale port flow control."
	DEFVAL { enabled }
	::= { snSwPortInfoEntry 35 }

snSwPortInfoGigType OBJECT-TYPE
	SYNTAX  INTEGER {
		m1000BaseSX(0),
		m1000BaseLX(1),
		m1000BaseLH(2),
		m1000BaseLHA(3),
		m1000BaseLHB(4),
		m1000BaseTX(5),
		m10000BaseSR(6),
		m10000BaseLR(7),
		m10000BaseER(8),
		sfpCWDM1470nm80Km(9),
		sfpCWDM1490nm80Km(10),
		sfpCWDM1510nm80Km(11),
		sfpCWDM1530nm80Km(12),
		sfpCWDM1550nm80Km(13),
		sfpCWDM1570nm80Km(14),
		sfpCWDM1590nm80Km(15),
		sfpCWDM1610nm80Km(16),
		sfpCWDM1470nm100Km(17),
		sfpCWDM1490nm100Km(18),
		sfpCWDM1510nm100Km(19),
		sfpCWDM1530nm100Km(20),
		sfpCWDM1550nm100Km(21),
		sfpCWDM1570nm100Km(22),
		sfpCWDM1590nm100Km(23),
		sfpCWDM1610nm100Km(24),
		m1000BaseLHX(25),
		m1000BaseSX2(26),
		m1000BaseGBXU(27),
		m1000BaseGBXD(28),
		notApplicable(255)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The media type for the port. The
		values are:
		  m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
		  m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
		  m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
		  m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
		  m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
		  m1000BaseTX(5)....1Gbits per second copper (100meter).
		  m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
		  m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
		  m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
		  sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms.
		  sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms.
		  sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms.
		  sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms.
		  sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms.
		  sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms.
		  sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms.
		  sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms.
		  sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms.
		  sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms.
		  sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms.
		  sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms.
		  sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms.
		  sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms.
		  sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms.
		  sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms.
		  m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km).
		  notApplicable(255)....a non-gigabit port."
	::= { snSwPortInfoEntry 36 }


snSwPortStatsLinkChange OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of link state change of the interface."
	::= { snSwPortInfoEntry 37 }


snSwPortIfIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"In order to identify a particular interface, this
		object shall identify the instance of the ifIndex
		object, defined in RFC 1213 and RFC 1573."
	::= { snSwPortInfoEntry 38 }


snSwPortDescr OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"A textual string containing the slot/port information
		about the interface."
	::= { snSwPortInfoEntry 39 }


snSwPortInOctets OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(8))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of octets received on the interface,
		including framing characters. This object is a 64-bit
		counter of the ifInOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snSwPortInfoEntry 40 }


snSwPortOutOctets OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(8))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of octets transmitted out of the interface,
		including framing characters. This object is a 64-bit
		counter of the ifOutOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snSwPortInfoEntry 41 }


snSwPortStatsInBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of bits per second received on the interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 42 }


snSwPortStatsOutBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of bits per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 43 }


snSwPortStatsInPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of packets per second received on the interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 44 }


snSwPortStatsOutPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The number of packets per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 45 }


snSwPortStatsInUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The input network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 46 }


snSwPortStatsOutUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The output network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 47 }

snSwPortFastSpanPortEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
			   disabled(0),
			   enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The enabled/disabled fast span port status of the port."
	 ::= { snSwPortInfoEntry 48 }

snSwPortFastSpanUplinkEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
			   disabled(0),
			   enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The enabled/disabled fast span uplink status of the port."
	 ::= { snSwPortInfoEntry 49 }

snSwPortVlanId OBJECT-TYPE
	 SYNTAX  INTEGER (0..4095)
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The ID of a VLAN of which this port is a member. Port must
		be untagged. For tagged port which belongs to multiple
		VLANs, this object return 0 which is an invalid VLAN ID
		value."
	 ::= { snSwPortInfoEntry 50 }

snSwPortRouteOnly OBJECT-TYPE
	 SYNTAX  INTEGER { disabled(0), enabled(1) }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"Enable/Disable L2 switching of a routing switch port.
		By default, the routing switch performs routing first.
		If routing failed, it performs switching. Enable route
		only instrcuts the routing switch to perform routing
		only. For a L2 switching only product, reading this
		object always return 'disabled', writing 'enabled' to
		this object takes no effect."
	 DEFVAL { disabled }
	 ::= { snSwPortInfoEntry 51 }

snSwPortPresent OBJECT-TYPE
	 SYNTAX  INTEGER {
			   false(0),
			   true(1)
			 }
	 MAX-ACCESS  read-only
	 STATUS  deprecated
	 DESCRIPTION
		"Indicate if the port is absent or present.
		 This object only valid for M4 module
		 "
	 ::= { snSwPortInfoEntry 52 }

snSwPortGBICStatus OBJECT-TYPE
	 SYNTAX  INTEGER {
			   gbic(1),
			   miniGBIC(2),
			   empty(3),
			   other(4)
			 }
	 MAX-ACCESS  read-only
	 STATUS  deprecated
	 DESCRIPTION
		"Indicate if the gig port has GBICs on them.
		 If set to  GBIC(1), it means that the port is GBIC.
		 If set to  miniGBIC(2), it means that the port miniGBIC.
		 If set to empty(3), it means that the GBIC is missing.
		 Value other(4) means that the port not a removable gig port.
		 "
	 ::= { snSwPortInfoEntry 53 }

snSwPortStatsInKiloBitsPerSec OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"Bit rate in kilobits per second received on the 10G and faster interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 54 }


snSwPortStatsOutKiloBitsPerSec OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"Bit rate in kilobits per second transmitted out of the 10G and faster interface
		over a 5 minutes interval."
	::= { snSwPortInfoEntry 55 }

snSwPortLoadInterval OBJECT-TYPE
	 SYNTAX  INTEGER (30..300)
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The time in seconds for which average port utilization should be carried out.
		The value should be incremental of 30 seconds, between the ranges specified."
	 DEFVAL { 300 }
	 ::= { snSwPortInfoEntry 56 }

snSwPortTagType OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"The IEEE802.1q tag type embedded in the length/type field of
		an Ethernet packet. It specifies that the 2 octets after the
		length/type field in an Ethernet packet is the tag value."
	 DEFVAL { 33024 }
	 ::= { snSwPortInfoEntry 57 }

snSwPortInLinePowerControl OBJECT-TYPE
	 SYNTAX  INTEGER {
			   other(1),
			   disable(2),
			   enable(3),
			   enableLegacyDevice(4)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"Control inline power on/off to a port. If a port does not
		have inline power capability, reading this object returns
		'other(1)'."
	 ::= { snSwPortInfoEntry 58 }

snSwPortInLinePowerWattage OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"Adjust the inline power wattage. Valid value between
		1000 and 15400. Each unit is milliwatts.
		This object can only be set after snSwPortInLinePowerControl
		has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
		a port does not have inline power capability, reading this
		object returns undefined value."
	 ::= { snSwPortInfoEntry 59 }

snSwPortInLinePowerClass OBJECT-TYPE
	 SYNTAX  INTEGER (0..3)
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"Adjust the inline power class. This object can only be set
		after snSwPortInLinePowerControl has been set to 'enable(3)'
		or 'enableLegacyDevice(4)'. If a port does not have inline
		power capability, reading this object returns undefined value."
	 ::= { snSwPortInfoEntry 60 }

snSwPortInLinePowerPriority OBJECT-TYPE
	 SYNTAX  INTEGER {
			   invalid(0),
			   critical(1),
			   high(2),
			   low(3),
			   medium(4),
			   other(5)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
		"Inline power allocation priority for the power device
		 0- Not a POE port, 1- Critical, 2- High, 3- Low,
		 4- Medium, 5- other."
	 ::= { snSwPortInfoEntry 61 }

snSwPortInfoMirrorMode OBJECT-TYPE
	 SYNTAX  INTEGER {
			   disable(0),
			   enable(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  deprecated
	 DESCRIPTION
			 "Enable/disable mirror on this port."
	 ::= { snSwPortInfoEntry 62 }

snSwPortStatsInJumboFrames OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of jumbo packets received on the interface."
	::= { snSwPortInfoEntry 63 }

snSwPortStatsOutJumboFrames OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The total number of jumbo packets transmitted out of the interface."
	::= { snSwPortInfoEntry 64 }

snSwPortInLinePowerConsumed OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-only
	 STATUS  deprecated
	 DESCRIPTION
		"Inline power consumed by the port. Each unit is milliwatts."
	 ::= { snSwPortInfoEntry 66 }

snSwPortInLinePowerPDType OBJECT-TYPE
	 SYNTAX	DisplayString
	 MAX-ACCESS  read-only
	 STATUS  deprecated
	 DESCRIPTION
		"Inline Power device type	802.3af or Legacy device."
	 ::= { snSwPortInfoEntry 67 }
-- end of deprecated snSwPortInfoTable

-- Switch Port Information Group
-- snSwIfInfoTable which is indexed by ifIndex port format is replacing the
-- snSwPortInfoTable which is indexed by a proprietary port format.

snSwIfInfoTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnSwIfInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A specific snSwIfInfo group consists of a number of
		 switch ports.  "
	::= { snSwPortInfo 5 }

snSwIfInfoEntry OBJECT-TYPE
	SYNTAX  SnSwIfInfoEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the snSwIfInfo table indicates the
		 configuration on a specified port. A SNMP SET PDU
		 for a row of the snSwIfInfoTable requires the entire
		 sequence of the MIB Objects in each
		 snSwIfInfoEntry stored in one PDU.  Otherwise,
		 GENERR return-value will be returned."
	INDEX   { snSwIfInfoPortNum }
	::= { snSwIfInfoTable 1 }

SnSwIfInfoEntry ::= SEQUENCE {
	snSwIfInfoPortNum
		InterfaceIndex,
	snSwIfInfoMonitorMode
		INTEGER,
	snSwIfInfoMirrorPorts
		OCTET STRING,
	snSwIfInfoTagMode
		INTEGER,
	snSwIfInfoTagType
		Integer32,
	snSwIfInfoChnMode
		INTEGER,
	snSwIfInfoSpeed
		INTEGER,
	snSwIfInfoMediaType
		INTEGER,
	snSwIfInfoConnectorType
		INTEGER,
	snSwIfInfoAdminStatus
		INTEGER,
	snSwIfInfoLinkStatus
		INTEGER,
	snSwIfInfoPortQos
		INTEGER,
	snSwIfInfoPhysAddress
		PhysAddress,
	snSwIfLockAddressCount
		INTEGER,
	snSwIfStpPortEnable
		INTEGER,
	snSwIfDhcpGateListId
		INTEGER,
	snSwIfName
		DisplayString,
	snSwIfDescr
		DisplayString,
	snSwIfInfoAutoNegotiate
		INTEGER,
	snSwIfInfoFlowControl
		INTEGER,
	snSwIfInfoGigType
		INTEGER,
	snSwIfFastSpanPortEnable
		INTEGER,
	snSwIfFastSpanUplinkEnable
		INTEGER,
	snSwIfVlanId
		INTEGER,
	snSwIfRouteOnly
		INTEGER,
	snSwIfPresent
		INTEGER,
	snSwIfGBICStatus
		INTEGER,
	snSwIfLoadInterval
		INTEGER ,
	snSwIfStatsInFrames
		Counter32,
	snSwIfStatsOutFrames
		Counter32,
	snSwIfStatsAlignErrors
		Counter32,
	snSwIfStatsFCSErrors
		Counter32,
	snSwIfStatsMultiColliFrames
		Counter32,
	snSwIfStatsTxColliFrames
		Counter32,
	snSwIfStatsRxColliFrames
		Counter32,
	snSwIfStatsFrameTooLongs
		Counter32,
	snSwIfStatsFrameTooShorts
		Counter32,
	snSwIfStatsInBcastFrames
		Counter32,
	snSwIfStatsOutBcastFrames
		Counter32,
	snSwIfStatsInMcastFrames
		Counter32,
	snSwIfStatsOutMcastFrames
		Counter32,
	snSwIfStatsInDiscard
		Counter32,
	snSwIfStatsOutDiscard
		Counter32,
	snSwIfStatsMacStations
		Integer32,
	snSwIfStatsLinkChange
		Counter32,
	snSwIfInOctets
		Counter64,
	snSwIfOutOctets
		Counter64,
	snSwIfStatsInBitsPerSec
		Gauge32,
	snSwIfStatsOutBitsPerSec
		Gauge32,
	snSwIfStatsInPktsPerSec
		Gauge32,
	snSwIfStatsOutPktsPerSec
		Gauge32,
	snSwIfStatsInUtilization
		INTEGER ,
	snSwIfStatsOutUtilization
		INTEGER ,
	snSwIfStatsInKiloBitsPerSec
		Unsigned32,
	snSwIfStatsOutKiloBitsPerSec
		Unsigned32,
	snSwIfStatsInJumboFrames
		Counter64,
	snSwIfStatsOutJumboFrames
		Counter64,
	snSwIfInfoMirrorMode
		INTEGER,
	snSwIfMacLearningDisable
		TruthValue,
	snSwIfInfoDonorInterface
		InterfaceIndexOrZero
	}

snSwIfInfoPortNum OBJECT-TYPE
	SYNTAX	InterfaceIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"The port/interface index (ifindex)."
	::= { snSwIfInfoEntry 1 }

snSwIfInfoMonitorMode OBJECT-TYPE
	SYNTAX  INTEGER {
				disabled(0),
				input(1),
				output(2),
				both(3)
			}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"DEPRECATED by snSwIf2MirrorMode and
		snPortMonitorTable."
	::= { snSwIfInfoEntry 2 }

snSwIfInfoMirrorPorts OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS  read-write
	STATUS		current
	DESCRIPTION
		"The list of port/interface index (ifindex), which mirror this interface,
		 when monitoring is enabled."
	::= { snSwIfInfoEntry 3 }

snSwIfInfoTagMode OBJECT-TYPE
	SYNTAX  INTEGER {
				tagged(1),
				untagged(2),
				dual(3)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"For tagged/dual port, we could have multiple VLANs
		 per port. For untagged port, there
		 is only one VLAN ID per port,  dual mode is associated with
		 a vlan id 'snSwIfVlanId', dual mode with snSwIfVlanId zero
		 disables the dual mode."
	::= { snSwIfInfoEntry 4 }

snSwIfInfoTagType OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The IEEE802.1q tag type embedded in the length/type field of
		an Ethernet packet. It specifies that the 2 octets after the
		length/type field in an Ethernet packet is the tag value."
	 DEFVAL { 33024 }
	 ::= { snSwIfInfoEntry 5 }

snSwIfInfoChnMode OBJECT-TYPE
	SYNTAX  INTEGER {
				none(0),
				halfDuplex(1),
				fullDuplex(2)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The port can be configured to operate in either
		half or full duplex mode. The values are:
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode
		The read-back channel status from hardware are:
			none(0).........link down or port disabled.
			halfDuplex(1)...half duplex mode
			fullDuplex(2)...full duplex mode

		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		value of this object.
		The port can not set to half duplex mode
		if the port connect mode is m200e(4).
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwIfInfoEntry 6 }

snSwIfInfoSpeed OBJECT-TYPE
	SYNTAX  INTEGER {
				none(0),
				sAutoSense(1),
				s10M(2),
				s100M(3),
				s1G(4),
				s1GM(5),
				s155M(6),
				s10G(7),
				s622M(8),
				s2488M(9),
				s9953M(10),
				s16G(11),
				s100G(12)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The speed configuration for a port. The values are:
		  none(0)..........link down or no traffic.
		  sAutoSense(1)....Auto-sensing 10 or 100Mbits.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s1GM(5)..........1Gbits per second master.
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.
		  s622M(8).........OC12 - 622Mbits per second
		  s2488M(9)........OC48 - 2.488Gbits per second
		  s9953M(10).......OC192 - 9.953Gbits per second
		  s16G(11)..........16Gbits per second.

		 The read-back hardware status are the following:
		  none(0)..........link down or no traffic.
		  s10M(2)..........10Mbits per second.
		  s100M(3).........100Mbits per second.
		  s1G(4)...........1Gbits per second.
		  s1GM(5)..........1Gbits per second master.
		  s155M(6).........155Mbits per second (ATM) (for expansion board only).
		  s10G(7)..........10Gbits per second.
		  s622M(8).........OC12 - 622Mbits per second
		  s2488M(9)........OC48 - 2.488Gbits per second
		  s9953M(10).......OC192 - 9.953Gbits per second
		  s16G(11)..........16Gbits per second.

		The port media type (expansion or regular)
		and port link type (trunk or feeder) determine
		whether this object can be written and the valid
		values.
		It is not allowed to change speed for trunks ports.
		For expansion ports, all of the above speed
		can be set.
		However, the value of this parameter may be
		automatically set whenever the expansion port
		is connected (e.g. cascade connecting device)."
	::= { snSwIfInfoEntry 7 }

snSwIfInfoMediaType OBJECT-TYPE
	SYNTAX  INTEGER {
				other(1),
				m100BaseTX(2),
				m100BaseFX(3),
				m1000BaseFX(4),
				mT3(5),
				m155ATM(6),
				m1000BaseTX(7),
				m622ATM(8),
				m155POS(9),
				m622POS(10),
				m2488POS(11),
				m10000BaseFX(12),
				m9953POS(13),
				m16GStacking(14),
				m100GBaseFX(15)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The media type for the port. The
		values are:
		  other(1).........other or unknown media.
		  m100BaseTX(2)....100Mbits per second copper.
		  m100BaseFX(3)....100Mbits per second fiber.
		  m1000BaseFX(4)...1Gbits per second fiber.
		  mT3(5)...........45Mbits per second (T3).
		  m155ATM(6).......155Mbits per second (ATM).
		  m1000BaseTX(7)...1Gbits per second copper.
		  m622ATM(8).......622Mbits per second (ATM).
		  m155POS(9).......155Mbits per second (POS).
		  m622POS(10)......622Mbits per second (POS).
		  m2488POS(11).....2488Mbits per second (POS).
		  m10000BaseFX(12).10Gbits per second fiber.
		  m9953POS(13).....9953Mbits per second (POS).
		  m16GStacking(14)...16Gbits per second fiber."
	::= { snSwIfInfoEntry 8 }

snSwIfInfoConnectorType OBJECT-TYPE
	SYNTAX  INTEGER {
				other(1),
				copper(2),
				fiber(3)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The type of connector that the port offers.
		 The values are:
		  other(1)...........other or unknown connector
		  copper(2)..........Copper connector
		  fiber(3)...........Fiber connector
		 This describes the physical connector type"
	::= { snSwIfInfoEntry 9 }

snSwIfInfoAdminStatus OBJECT-TYPE
	SYNTAX  INTEGER {
				up(1),       -- ready to pass packets
				down(2),
				testing(3)   -- in some test mode
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The desired state of all ports.  The
		testing(3) state indicates that no operational
		packets can be passed.
		(same as ifAdminStatus in MIB-II)"
	::= { snSwIfInfoEntry 10 }

snSwIfInfoLinkStatus OBJECT-TYPE
	SYNTAX  INTEGER {
				up(1),       -- ready to pass packets
				down(2),
				testing(3)   -- in some test mode
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The current operational state of the interface.
		 The testing(3) state indicates that no operational
		 packets can be passed.
		 (same as ifOperStatus in MIB-II)"
	::= { snSwIfInfoEntry 11 }

snSwIfInfoPortQos OBJECT-TYPE
	SYNTAX  INTEGER {
				level0(0),
				level1(1),
				level2(2),
				level3(3),
				level4(4),
				level5(5),
				level6(6),
				level7(7)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Stand alone stackable switch Port Qos Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron Port Qos Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snSwIfInfoEntry 12 }

snSwIfInfoPhysAddress OBJECT-TYPE
	SYNTAX  PhysAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port physical address. The physical address
		represents the switch port."
	::= { snSwIfInfoEntry 13 }

snSwIfLockAddressCount OBJECT-TYPE
	 SYNTAX  INTEGER (0..2048)
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The number of source MAC addresses are allowed
		for a port. Writing 0 to this object will allow
		any number of addresses."
	DEFVAL { 8 }
	::= { snSwIfInfoEntry 14 }

snSwIfStpPortEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
				disabled(0),
				enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The enabled/disabled status of the port."
	 REFERENCE
		"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
	 ::= { snSwIfInfoEntry 15 }

snSwIfDhcpGateListId OBJECT-TYPE
	SYNTAX  INTEGER (0..32)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The ID for a DHCP gateway list entry relative
		 to this switch port. 0 = unset or no assigned ID"
	::= { snSwIfInfoEntry 16 }

snSwIfName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..255))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Port Name string."
	::= { snSwIfInfoEntry 17 }

snSwIfDescr OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"A textual string containing the slot/port information
		about the interface."
	::= { snSwIfInfoEntry 18 }

snSwIfInfoAutoNegotiate OBJECT-TYPE
	SYNTAX  INTEGER {
				disabled(0),
				enabled(1),
				negFullAuto(2),
				global(3),
				other(4)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This feature only applies to Gigabit Ethernet ports. If set to
		disable(0), port will be put to non-negotiation mode. If set to
		enable(1), port will start auto-negotiation indefinitely until
		succeed. If set to negFullAuto(2), the port will start with auto-
		negotiation, if the negotiation failed, then it will automatically
		switch to non-negotiation mode. Stackable products (except TurboIron
		8) Gigabit Ethernet ports do not support negFullAuto(2). If set
		to global(3), port negotiation mode follows the value of
		snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
		the value other(4)."
	DEFVAL { global }
	::= { snSwIfInfoEntry 19 }

snSwIfInfoFlowControl OBJECT-TYPE
	SYNTAX  INTEGER {
				disabled(0),
				enabled(1)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/Disbale port flow control."
	DEFVAL { enabled }
	::= { snSwIfInfoEntry 20 }

snSwIfInfoGigType OBJECT-TYPE
	SYNTAX  INTEGER {
				m1000BaseSX(0),
				m1000BaseLX(1),
				m1000BaseLH(2),
				m1000BaseLHA(3),
				m1000BaseLHB(4),
				m1000BaseTX(5),
				m10000BaseSR(6),
				m10000BaseLR(7),
				m10000BaseER(8),
				sfpCWDM1470nm80Km(9),
				sfpCWDM1490nm80Km(10),
				sfpCWDM1510nm80Km(11),
				sfpCWDM1530nm80Km(12),
				sfpCWDM1550nm80Km(13),
				sfpCWDM1570nm80Km(14),
				sfpCWDM1590nm80Km(15),
				sfpCWDM1610nm80Km(16),
				sfpCWDM1470nm100Km(17),
				sfpCWDM1490nm100Km(18),
				sfpCWDM1510nm100Km(19),
				sfpCWDM1530nm100Km(20),
				sfpCWDM1550nm100Km(21),
				sfpCWDM1570nm100Km(22),
				sfpCWDM1590nm100Km(23),
				sfpCWDM1610nm100Km(24),
				m1000BaseLHX(25),
				m1000BaseSX2(26),
				mSFP1000BaseBXU(27),
				mSFP1000BaseBXD(28),
				mSFP100BaseBX(29),
				mSFP100BaseBXU(30),
				mSFP100BaseBXD(31),
				mSFP100BaseFX(32),
				mSFP100BaseFXIR(33),
				mSFP100BaseFXLR(34),
				m1000BaseLMC(35),
				mXFP10000BaseSR(36),
				mXFP10000BaseLR(37),
				mXFP10000BaseER(38),
				mXFP10000BaseSW(39),
				mXFP10000BaseLW(40),
				mXFP10000BaseEW(41),
				mXFP10000BaseCX4(42),
				mXFP10000BaseZR(43),
				mXFP10000BaseZRD(44),
				m1000BaseC6553(45),
				mXFP10000BaseSRSW(46),
				mXFP10000BaseLRLW(47),
				mXFP10000BaseEREW(48),
				m1000BaseGBXU(127),
				m1000BaseGBXD(128),
				m1000BaseFBX(129),
				m1000BaseFBXU(130),
				m1000BaseFBXD(131),
				m1000BaseFX(132),
				m1000BaseFXIR(133),
				m1000BaseFXLR(134),
				m1000BaseXGSR(136),
				m1000BaseXGLR(137),
				m1000BaseXGER(138),
				m1000BaseXGSW(139),
				m1000BaseXGLW(140),
				m1000BaseXGEW(141),
				m1000BaseXGCX4(142),
				m1000BaseXGZR(143),
				m1000BaseXGZRD(144),
				mCFP100GBaseSR10(145),
				mCFP100GBaseLR4(146),
				mCFP100GBaseER4(147),
				mCFP100GBase10x10g2Km(148),
				mCFP100GBase10x10g10Km(149),
				notApplicable(255)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The media type for the port. The
		values are:
		  m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
		  m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
		  m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
		  m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
		  m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
		  m1000BaseTX(5)....1Gbits per second copper (100meter).
		  m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
		  m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
		  m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
		  sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms.
		  sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms.
		  sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms.
		  sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms.
		  sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms.
		  sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms.
		  sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms.
		  sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms.
		  sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms.
		  sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms.
		  sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms.
		  sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms.
		  sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms.
		  sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms.
		  sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms.
		  sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms.
		  m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km).
		  m1000BaseLMC(35)...Link Media Copper.
		  mXFP10000BaseSR(36)...10GBASE fiber, 850nm serial pluggable XFP optic (LC), target range 300m over MMF.
		  mXFP10000BaseLR(37)...10GBASE fiber, 1310nm serial pluggable XFP optic (LC) for up to 10km over SMF.
		  mXFP10000BaseER(38)...10GBASE fiber, 1550nm serial pluggable XFP optic (LC) for up to 40km over SMF.
		  mXFP10000BaseSW(39)...not used.
		  mXFP10000BaseLW(40)...not used.
		  mXFP10000BaseEW(41)...not used
		  mXFP10000BaseCX4(42)...10GBASE-CX4, XFP module,15m, CX4 connector.
		  mXFP10000BaseZR(43)...1550nm serial pluggable XFP optic (LC) for up to 80km over SMF.
		  mXFP10000BaseZRD(44)...10GBASE-ZR DWDM, XFP optic, 80km.
		  mXFP10000BaseSRSW(46)...same as .mXFP10000BaseSR(36)
		  mXFP10000BaseLRLW(47)...same as .mXFP10000BaseLR(37)
		  mXFP10000BaseEREW(48)...same as mXFP10000BaseER(38).
		  mCFP100GBaseSR10(145)... 100GbE CFP optic (MPO 2x12), SR10, for distances up to 100m over MMF.
		  mCFP100GBaseLR4(146)... 100GbE CFP optic (SC), LR4, for distances up to 10 km over SMF.
		  mCFP100GBaseER4(147)... 100GbE CFP optic, ER4, for distances up to 40 km over SMF.
		  mCFP100GBase10x10g2Km(148)... 100GbE CFP optic (LC), 10x10, for distances up to 2 km over SMF.
		  mCFP100GBase10x10g10Km(149)... 100GbE CFP optic (LC), 10x10, for distances up to 10 km over SMF.
		  notApplicable(255)....a non-gigabit port."
	::= { snSwIfInfoEntry 21 }

snSwIfFastSpanPortEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
				disabled(0),
				enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The enabled/disabled fast span port status of the port."
	 ::= { snSwIfInfoEntry 22 }

snSwIfFastSpanUplinkEnable OBJECT-TYPE
	 SYNTAX  INTEGER {
				disabled(0),
				enabled(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The enabled/disabled fast span uplink status of the port."
	 ::= { snSwIfInfoEntry 23 }

snSwIfVlanId OBJECT-TYPE
	 SYNTAX  INTEGER (0..4095)
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The ID of a VLAN of which this port is a member. Port must
		be untagged. For tagged port which belongs to multiple
		VLANs, this object return 0 which is an invalid VLAN ID
		value, reading is valid only for untagged and dual mode,
		writing is valid for only dual mode."
	 ::= { snSwIfInfoEntry 24 }

snSwIfRouteOnly OBJECT-TYPE
	 SYNTAX INTEGER {
				disabled(0),
				enabled(1)
			}
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"Enable/Disable L2 switching of a routing switch port.
		By default, the routing switch performs routing first.
		If routing failed, it performs switching. Enable route
		only instrcuts the routing switch to perform routing
		only. For a L2 switching only product, reading this
		object always return 'disabled', writing 'enabled' to
		this object takes no effect."
	 DEFVAL { disabled }
	 ::= { snSwIfInfoEntry 25 }

snSwIfPresent OBJECT-TYPE
	 SYNTAX  INTEGER {
				false(0),
				true(1)
			 }
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		"Indicate if the port is absent or present.
		 This object only valid for M4 module."
	 ::= { snSwIfInfoEntry 26 }

snSwIfGBICStatus OBJECT-TYPE
	 SYNTAX  INTEGER {
				gbic(1),
				miniGBIC(2),
				empty(3),
				other(4)
			 }
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		"Indicate if the gig port has GBICs on them.
		 If set to  GBIC(1), it means that the port is GBIC.
		 If set to  miniGBIC(2), it means that the port miniGBIC.
		 If set to empty(3), it means that the GBIC is missing.
		 Value other(4) means that the port not a removable gig port.
		 "
	 ::= { snSwIfInfoEntry 27 }

snSwIfLoadInterval OBJECT-TYPE
	 SYNTAX  INTEGER (30..300)
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The time in seconds for which average port utilization should be carried out.
		The value should be incremental of 30 seconds, between the ranges specified."
	 DEFVAL { 300 }
	 ::= { snSwIfInfoEntry 28 }

snSwIfStatsInFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets received on the interface."
	::= { snSwIfInfoEntry 29 }

snSwIfStatsOutFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of packets transmitted out of the interface."
	::= { snSwIfInfoEntry 30 }

snSwIfStatsAlignErrors   OBJECT-TYPE
	 SYNTAX     Counter32
	 MAX-ACCESS     read-only
	 STATUS     current
	 DESCRIPTION
		"dot3StatsAlignmentErrors : A count of frames
		received on a particular interface that are
		not an integral number of octets in length
		and do not pass the FCS check.

		The count represented by an instance of this
		object is incremented when the alignmentError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwIfInfoEntry 31 }

snSwIfStatsFCSErrors   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      current
	 DESCRIPTION
		"dot3StatsFCSErrors : A count of frames received
		on a particular interface that are an integral
		number of octets in length but do not pass the
		FCS check.

		The count represented by an instance of this
		object is incremented when the frameCheckError
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwIfInfoEntry 32 }

snSwIfStatsMultiColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      current
	 DESCRIPTION
		"dot3StatsMultipleCollisionFrames :
		A count of successfully transmitted frames on
		a particular interface for which transmission
		is inhibited by more than one collision.

		A frame that is counted by an instance of this
		object is also counted by the corresponding
		instance of either the ifOutUcastPkts,
		ifOutMulticastPkts, or ifOutBroadcastPkts,
		and is not counted by the corresponding
		instance of the dot3StatsSingleCollisionFrames
		object."
	::= { snSwIfInfoEntry 33 }

snSwIfStatsTxColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      current
	 DESCRIPTION
		"A count of successfully transmitted frames on
		a particular interface for which transmission
		is inhibited by more than one collision.

		A frame that is counted by a combination of
		both dot3StatsSingleCollisionFrames and
		dot3StatsMultipleCollisionFrames objects."
	::= { snSwIfInfoEntry 34 }

snSwIfStatsRxColliFrames   OBJECT-TYPE
	 SYNTAX      Counter32
	 MAX-ACCESS      read-only
	 STATUS      current
	 DESCRIPTION
		"A count of successfully received frames on
		a particular interface for which transmission
		is inhibited by more than one collision.  This
		object is not specified in dot3 but it has the
		same functionarity as snSwIfStatsTxColliFrames."
	::= { snSwIfInfoEntry 35 }

snSwIfStatsFrameTooLongs   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    current
	 DESCRIPTION
		"dot3StatsFrameTooLongs : A count of frames
		received on a particular interface that
		exceed the maximum permitted frame size.

		The count represented by an instance of this
		object is incremented when the frameTooLong
		status is returned by the MAC service to the
		LLC (or other MAC user). Received frames for
		which multiple error conditions obtain are,
		according to the conventions of IEEE 802.3
		Layer Management, counted exclusively according
		to the error status presented to the LLC."
	::= { snSwIfInfoEntry 36 }

snSwIfStatsFrameTooShorts   OBJECT-TYPE
	 SYNTAX    Counter32
	 MAX-ACCESS    read-only
	 STATUS    current
	 DESCRIPTION
		" A count of frames received on a particular
		interface that below the minimum permitted
		frame size."
	::= { snSwIfInfoEntry 37 }

snSwIfStatsInBcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of broadcast packets received on the interface."
	::= { snSwIfInfoEntry 38 }

snSwIfStatsOutBcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of broadcast packets transmitted out of the interface."
	::= { snSwIfInfoEntry 39 }

snSwIfStatsInMcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of multicast packets received on the interface."
	::= { snSwIfInfoEntry 40 }

snSwIfStatsOutMcastFrames OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of multicast packets transmitted out of the interface."
	::= { snSwIfInfoEntry 41 }

snSwIfStatsInDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of inbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being deliverable to a
		 higher-layer protocol.  One possible reason for
		 discarding such a packet could be to free up
		 buffer space."
	::= { snSwIfInfoEntry 42 }

snSwIfStatsOutDiscard OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of outbound packets which were chosen
		 to be discarded even though no errors had been
		 detected to prevent their being transmitted.  One
		 possible reason for discarding such a packet could
		 be to free up buffer space."
	::= { snSwIfInfoEntry 43 }

snSwIfStatsMacStations OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of MAC Stations connected to the interface."
	::= { snSwIfInfoEntry 44 }

snSwIfStatsLinkChange OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of link state change of the interface."
	::= { snSwIfInfoEntry 45 }

snSwIfInOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of octets received on the interface,
		including framing characters. This object is a 64-bit
		counter of the ifInOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snSwIfInfoEntry 46 }

snSwIfOutOctets OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of octets transmitted out of the interface,
		including framing characters. This object is a 64-bit
		counter of the ifOutOctets object, defined in RFC 1213.
		The octet string is in big-endian byte order."
	::= { snSwIfInfoEntry 47 }

snSwIfStatsInBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of bits per second received on the interface
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 48 }

snSwIfStatsOutBitsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of bits per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 49 }

snSwIfStatsInPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of packets per second received on the interface
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 50 }

snSwIfStatsOutPktsPerSec OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of packets per second transmitted out of the interface
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 51 }

snSwIfStatsInUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The input network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 52 }

snSwIfStatsOutUtilization OBJECT-TYPE
	SYNTAX  INTEGER (0..10000)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The output network utilization in hundredths of a percent
		over a 5 minutes interval."
	::= { snSwIfInfoEntry 53 }

snSwIfStatsInKiloBitsPerSec OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Bit rate in kilobits per second received on the 10G and
		 faster interface over a 5 minutes interval."
	::= { snSwIfInfoEntry 54 }

snSwIfStatsOutKiloBitsPerSec OBJECT-TYPE
	SYNTAX  Unsigned32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Bit rate in kilobits per second transmitted out of the 10G
		 and faster interface over a 5 minutes interval."
	::= { snSwIfInfoEntry 55 }

snSwIfStatsInJumboFrames OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of jumbo packets received on the interface."
	::= { snSwIfInfoEntry 56 }

snSwIfStatsOutJumboFrames OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The total number of jumbo packets transmitted out of the interface."
	::= { snSwIfInfoEntry 57 }

snSwIfInfoMirrorMode OBJECT-TYPE
	 SYNTAX  INTEGER {
			   disable(0),
			   enable(1)
			 }
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
			 "Enable/disable mirror on this port."
	 ::= { snSwIfInfoEntry 58 }

snSwIfMacLearningDisable OBJECT-TYPE
	 SYNTAX TruthValue
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
		"The status of MAC learning feature on an ethernet port.
		For POS port, Get operation will return the default value and Set operation will return an error."
	  DEFVAL
		  { false }
	 ::= { snSwIfInfoEntry 59 }

snSwIfInfoDonorInterface  OBJECT-TYPE
	 SYNTAX     InterfaceIndexOrZero
	 MAX-ACCESS  read-only
	 STATUS     current
	 DESCRIPTION
		"If this interface is configured as an unnumbered 
		interface, it will return the ifIndex of the donor 
		interface. If this is configured as a donor interface, it 
		will return its own ifIndex value. Otherwise, it will 
		return 0."
         ::= { snSwIfInfoEntry 60 }


-- Interface ID Registration Group

snInterfaceId OBJECT IDENTIFIER				::= { snSwPortInfo 2 }
snEthernetInterface OBJECT IDENTIFIER		::= { snInterfaceId 1 }
snPosInterface OBJECT IDENTIFIER			::= { snInterfaceId 2 }
snAtmInterface OBJECT IDENTIFIER			::= { snInterfaceId 3 }
snVirtualInterface OBJECT IDENTIFIER		::= { snInterfaceId 4 }
snLoopbackInterface OBJECT IDENTIFIER		::= { snInterfaceId 5 }
snGreTunnelInterface OBJECT IDENTIFIER		::= { snInterfaceId 6 }
snSubInterface OBJECT IDENTIFIER			::= { snInterfaceId 7 }
snMplsTunnelInterface OBJECT IDENTIFIER		::= { snInterfaceId 8 }
snPvcInterface OBJECT IDENTIFIER			::= { snInterfaceId 9 }
snMgmtEthernetInterface OBJECT IDENTIFIER	::= { snInterfaceId 10 }
snTrunkInterface OBJECT IDENTIFIER			::= { snInterfaceId 11 }
snVirtualMgmtInterface OBJECT IDENTIFIER    ::= { snInterfaceId 12 }
sn6to4TunnelInterface OBJECT IDENTIFIER		::= { snInterfaceId 13 }

-- Interface ID to ifIndex Lookup Table
-- Given an interface ID, this table returns the ifIndex value.
--
-- Note: This table does not behave like most SNMP tables.  It does not
-- support GetNext.  If you try to walk the table using GetNext, no rows
-- will be returned.  The contents of the table can only be accessed
-- using Get operations.  The table is useful for mapping a known
-- interface to the corresponding ifIndex value.

snInterfaceLookupTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnInterfaceLookupEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	::= { snSwPortInfo 3 }

snInterfaceLookupEntry OBJECT-TYPE
	SYNTAX  SnInterfaceLookupEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	INDEX { snInterfaceLookupInterfaceId }
	::= { snInterfaceLookupTable 1 }

SnInterfaceLookupEntry ::= SEQUENCE {
	snInterfaceLookupInterfaceId
		InterfaceId,
	snInterfaceLookupIfIndex
		Integer32
	}

snInterfaceLookupInterfaceId OBJECT-TYPE
	 SYNTAX  InterfaceId
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snInterfaceLookupEntry 1 }

snInterfaceLookupIfIndex OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snInterfaceLookupEntry 2 }


-- ifIndex to Interface ID Lookup Table
-- Given an ifIndex, this table returns the interface ID value.

snIfIndexLookupTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnIfIndexLookupEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	::= { snSwPortInfo 4 }

snIfIndexLookupEntry OBJECT-TYPE
	SYNTAX  SnIfIndexLookupEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	INDEX { snIfIndexLookupIfIndex }
	::= { snIfIndexLookupTable 1 }

SnIfIndexLookupEntry ::= SEQUENCE {
	snIfIndexLookupIfIndex
		Integer32,
	snIfIndexLookupInterfaceId
		InterfaceId
	}

snIfIndexLookupIfIndex OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snIfIndexLookupEntry 1 }

snIfIndexLookupInterfaceId OBJECT-TYPE
	 SYNTAX  InterfaceId
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snIfIndexLookupEntry 2 }

-- Interface ID2 to ifIndex Lookup Table
-- Given an interface ID2, this table returns the ifIndex value.
--
-- Note: This table does not behave like most SNMP tables.  It does not
-- support GetNext.  If you try to walk the table using GetNext, no rows
-- will be returned.  The contents of the table can only be accessed
-- using Get operations.  The table is useful for mapping a known
-- interface to the corresponding ifIndex value.

snInterfaceLookup2Table OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnInterfaceLookup2Entry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	::= { snSwPortInfo 7 }

snInterfaceLookup2Entry OBJECT-TYPE
	SYNTAX  SnInterfaceLookup2Entry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	INDEX { snInterfaceLookup2InterfaceId }
	::= { snInterfaceLookup2Table 1 }

SnInterfaceLookup2Entry ::= SEQUENCE {
	snInterfaceLookup2InterfaceId
		InterfaceId2,
	snInterfaceLookup2IfIndex
		Integer32
	}

snInterfaceLookup2InterfaceId OBJECT-TYPE
	 SYNTAX  InterfaceId2
	 MAX-ACCESS  not-accessible
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snInterfaceLookup2Entry 1 }

snInterfaceLookup2IfIndex OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snInterfaceLookup2Entry 2 }


-- ifIndex to Interface ID2 Lookup Table
-- Given an ifIndex, this table returns the interface ID2 value.
snIfIndexLookup2Table OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnIfIndexLookup2Entry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	::= { snSwPortInfo 8 }

snIfIndexLookup2Entry OBJECT-TYPE
	SYNTAX  SnIfIndexLookup2Entry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		""
	INDEX { snIfIndexLookup2IfIndex }
	::= { snIfIndexLookup2Table 1 }

SnIfIndexLookup2Entry ::= SEQUENCE {
	snIfIndexLookup2IfIndex
		Integer32,
	snIfIndexLookup2InterfaceId
		InterfaceId2
	}

snIfIndexLookup2IfIndex OBJECT-TYPE
	 SYNTAX  Integer32
	 MAX-ACCESS  not-accessible
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snIfIndexLookup2Entry 1 }

snIfIndexLookup2InterfaceId OBJECT-TYPE
	 SYNTAX  InterfaceId2
	 MAX-ACCESS  read-only
	 STATUS  current
	 DESCRIPTION
		""
	 ::= { snIfIndexLookup2Entry 2 }

-- ifIndex to Optical Parameters Table
-- Given an ifIndex, this table returns the optical parameters for the ifIndex.

snIfOpticalMonitoringInfoTable  OBJECT-TYPE
	 SYNTAX      SEQUENCE OF SnIfOpticalMonitoringInfoEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "This table lists the instrumented parameters of all
		  optical interfaces."
	 REFERENCE
		  "ITU recommendations G.783, G.784, G.953"

	::= { snSwPortInfo 6 }

snIfOpticalMonitoringInfoEntry  OBJECT-TYPE
	 SYNTAX      SnIfOpticalMonitoringInfoEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "Only the ifIndices of optical interfaces
		  whose parameters need to be monitored will
		  be used to index this table."
	 INDEX       { ifIndex }
	 ::= { snIfOpticalMonitoringInfoTable 1 }

SnIfOpticalMonitoringInfoEntry ::=
	 SEQUENCE  {
		 snIfOpticalMonitoringTemperature
				  DisplayString,
		 snIfOpticalMonitoringTxPower
				  DisplayString,
		 snIfOpticalMonitoringRxPower
				  DisplayString,
		 snIfOpticalMonitoringTxBiasCurrent
				  DisplayString
	 }

snIfOpticalMonitoringTemperature  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the transmitter laser
			diode temperature for the interface.  This object
			indicates the health of the transmitter.

			The format is xxx.yyyy C(elcius), followed by whether
			the measured value is normal, high/low alarm or
			high/low warning.
			For 100G LR4 and LR10 optic, this returns the average
			temperature for all lanes."
	::= { snIfOpticalMonitoringInfoEntry 1 }

snIfOpticalMonitoringTxPower  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the transmitter optical
			signal power for the interface, measured in dBm, followed
			by whether this is a normal value, or high/low warning
			or alarm. For 100G LR4 and LR10 optic, this returns the aggregated
			Tx Power for all lanes."
	 ::= { snIfOpticalMonitoringInfoEntry 2 }

snIfOpticalMonitoringRxPower  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the receiver optical
			signal power for the interface, measured in dBm, followed
			by whether this is a normal value, or high/low warning
			or alarm.
			  For 100G LR4 and LR10 optic, this returns the aggregated
			Rx Power for all lanes."
	::= { snIfOpticalMonitoringInfoEntry 3 }

snIfOpticalMonitoringTxBiasCurrent  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "Tx Bias Current.  It is measured in mA, and is followed
		   by whether this is a normal value, or high/low warning or
		   alarm.
		     For 100G LR4 and LR10 optic, this returns the aggregated
		   Tx Bias Current for all lanes."
	 ::= { snIfOpticalMonitoringInfoEntry 4 }

--
-- Show Media Information
-- Information of the media device installed in the physical ports.
--

snIfMediaInfoTable  OBJECT-TYPE
	 SYNTAX      SEQUENCE OF SnIfMediaInfoEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "This table lists the information of the media device
		   (SFP/XFP/Copper) installed in the physical port.
		   Only the ifIndices of Ethernet ports those are associated
		   with the operational cards will be included in this table."
		::= { snSwPortInfo 9 }

snIfMediaInfoEntry  OBJECT-TYPE
	 SYNTAX      SnIfMediaInfoEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "An entry in the Interface Media Information table.
		   The ifIndices of ethernet interfaces will be used
		   to index this table."
	 INDEX       { ifIndex }
	 ::= { snIfMediaInfoTable 1 }

SnIfMediaInfoEntry ::=
	 SEQUENCE  {
		 snIfMediaType
			   DisplayString,
		 snIfMediaVendorName
			   DisplayString,
		 snIfMediaVersion
			   DisplayString,
		 snIfMediaPartNumber
			   DisplayString,
		 snIfMediaSerialNumber
			   DisplayString
	 }

snIfMediaType  OBJECT-TYPE
	 SYNTAX       DisplayString (SIZE (0..128))
	 MAX-ACCESS       read-only
	 STATUS       current
	 DESCRIPTION
		  "The type of the media installed in the physical port."
	 ::= { snIfMediaInfoEntry 1 }

snIfMediaVendorName  OBJECT-TYPE
	 SYNTAX       DisplayString (SIZE (0..128))
	 MAX-ACCESS       read-only
	 STATUS       current
	 DESCRIPTION
		  "The media vendor name, full name of the corporation."
	 ::= { snIfMediaInfoEntry 2 }

snIfMediaVersion  OBJECT-TYPE
	 SYNTAX       DisplayString (SIZE (0..128))
	 MAX-ACCESS       read-only
	 STATUS       current
	 DESCRIPTION
		  "The media vendor product version number."
	 ::= { snIfMediaInfoEntry 3 }

snIfMediaPartNumber  OBJECT-TYPE
	 SYNTAX       DisplayString (SIZE (0..128))
	 MAX-ACCESS       read-only
	 STATUS       current
	 DESCRIPTION
		  "The media vendor part number."

	 ::= { snIfMediaInfoEntry 4 }

snIfMediaSerialNumber  OBJECT-TYPE
	 SYNTAX       DisplayString (SIZE (0..128))
	 MAX-ACCESS       read-only
	 STATUS       current
	 DESCRIPTION
		  "The vendor serial number of the media device."
	 ::= { snIfMediaInfoEntry 5 }

-- Optical Parameters Table per lane for a 100G LR4 and LR10 optic.

snIfOpticalLaneMonitoringTable  OBJECT-TYPE
	 SYNTAX      SEQUENCE OF SnIfOpticalLaneMonitoringEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "This table lists the instrumented parameters of all
		  lanes within a 100G optic of type LR4 and LR10.
		  LR4 has 4 lanes per optic, LR10 has 10 lanes per optic."
	 REFERENCE
		  "ITU recommendations G.783, G.784, G.953"
	::= { snSwPortInfo 10 }

snIfOpticalLaneMonitoringEntry  OBJECT-TYPE
	 SYNTAX      SnIfOpticalLaneMonitoringEntry
	 MAX-ACCESS      not-accessible
	 STATUS      current
	 DESCRIPTION
		  "Only the ifIndices of optical interfaces
		  whose parameters need to be monitored will
		  be used to index this table."
	 INDEX       { ifIndex, snIfOpticalLaneMonitoringLane }
	 ::= { snIfOpticalLaneMonitoringTable 1 }

SnIfOpticalLaneMonitoringEntry ::=
	 SEQUENCE  {
		 snIfOpticalLaneMonitoringLane
				  Unsigned32,
		 snIfOpticalLaneMonitoringTemperature
				  DisplayString,
		 snIfOpticalLaneMonitoringTxPower
				  DisplayString,
		 snIfOpticalLaneMonitoringRxPower
				  DisplayString,
		 snIfOpticalLaneMonitoringTxBiasCurrent
				  DisplayString
	 }

snIfOpticalLaneMonitoringLane  OBJECT-TYPE
	  SYNTAX    Unsigned32
	  MAX-ACCESS    not-accessible
	  STATUS    current
	  DESCRIPTION
		   "The lane number of this 100G optic. LR4 has 4, and LR10 has 
			10 lanes."
	::= { snIfOpticalLaneMonitoringEntry 1 }

snIfOpticalLaneMonitoringTemperature  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the transmitter laser 
			diode temperature for the lane in the interface. This 
			object indicates the health of the transmitter.
			
			The format is xxx.yyyy C(elcius), followed by whether 
			the measured value is normal, high/low alarm or 
			high/low warning."
	::= { snIfOpticalLaneMonitoringEntry 2 }

snIfOpticalLaneMonitoringTxPower  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the transmitter optical 
			signal power for the lane in the interface, measured in
			dBm, followed by whether this is a normal value, or 
			high/low warning or alarm."
	 ::= { snIfOpticalLaneMonitoringEntry 3 }

snIfOpticalLaneMonitoringRxPower  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "This object holds the value of the receiver optical
			signal power for the lane in the interface, measured in
			dBm, followed by whether this is a normal value, or
			high/low warning or alarm."
	::= { snIfOpticalLaneMonitoringEntry 4 }

snIfOpticalLaneMonitoringTxBiasCurrent  OBJECT-TYPE
	  SYNTAX	DisplayString (SIZE(0..32))
	  MAX-ACCESS    read-only
	  STATUS    current
	  DESCRIPTION
		   "Tx Bias Current.  It is measured in mA, and is followed
		   by whether this is a normal value, or high/low warning or
		   alarm."
	 ::= { snIfOpticalLaneMonitoringEntry 5 }

--      Forwarding Database Group
--
-- This group contains information relevant to
-- the forwarding database in the system.



-- The Forward Database Static Table Information
--
-- This table contains all MAC addresses in the system. Static
-- stations may be configured.


snFdbTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnFdbEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"This table contains snFdb information for each station
		known to the system, one entry per station."
	::= { snFdbInfo 1 }

snFdbEntry OBJECT-TYPE
	SYNTAX  SnFdbEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Each entry represents the information of a static MAC station."
	INDEX   {
		snFdbStationIndex
	}
	::= { snFdbTable 1 }


SnFdbEntry ::= SEQUENCE {
	snFdbStationIndex
		INTEGER,
	snFdbStationAddr
		PhysAddress,
	snFdbStationPort
		Integer32,
	snFdbVLanId
		INTEGER,
	snFdbStationQos
		INTEGER,
	snFdbStationType
		INTEGER,
	snFdbRowStatus
		INTEGER,
	snFdbStationIf
		InterfaceIndex
	}

snFdbStationIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..256)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The FDB Station index to the Fdb Station Table."
	::= { snFdbEntry 1 }

snFdbStationAddr OBJECT-TYPE
	SYNTAX  PhysAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The snFdbs physical address. The physical address
		represents a MAC Station."
	::= { snFdbEntry 2 }


snFdbStationPort OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Station slot/port number.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snFdbEntry 3 }


snFdbVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Station VLan ID."
	::= { snFdbEntry 4 }

snFdbStationQos OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Stand alone stackable station Qos Priority values are:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron switch station Priority values are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snFdbEntry 5 }

snFdbStationType OBJECT-TYPE
	SYNTAX  INTEGER {
		notSupported(0),
		host(1),
		router(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The station type values are:
		 notSupported    -- a read value only : this product does not
							support MultiLayer Switching.
		 host    -- any MAC station.
		 router  -- a router-typed station."
	::= { snFdbEntry 6 }

snFdbRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snFdbEntry 7 }

snFdbStationIf OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Station interface index."
	::= { snFdbEntry 8 }


-- Port STP Configuration Group
-- snPortStpTable was deprecated. It has been replaced by snIfStpTable.


snPortStpTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnPortStpEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"A specific snPortStpTable consists of a number of
		 switch ports. This table only exists if only if
		 snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
		 enabled for each VLAN."
	::= { snPortStpInfo 1 }

snPortStpEntry OBJECT-TYPE
	SYNTAX  SnPortStpEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"An entry in the snPortStpTable indicates the
		 configuration on a specified port. A SNMP SET PDU
		 for a row of the snPortStpTable requires the entired
		 sequence of the MIB Objects in each
		 snPortStpEntry stored in one PDU.  Otherwise,
		 GENERR return-value will be returned."
	INDEX   {
			snPortStpVLanId,
			snPortStpPortNum
	}
	::= { snPortStpTable 1 }

SnPortStpEntry ::= SEQUENCE {
	snPortStpVLanId
		INTEGER,
	snPortStpPortNum
		Integer32,
	snPortStpPortPriority
		INTEGER,
	snPortStpPathCost
		INTEGER,
	snPortStpOperState
		INTEGER,
	snPortStpPortEnable
		INTEGER,
	snPortStpPortForwardTransitions
		Counter32,
	snPortStpPortState
		INTEGER,
	snPortStpPortDesignatedCost
		Integer32,
	snPortStpPortDesignatedRoot
		BridgeId,
	snPortStpPortDesignatedBridge
		BridgeId,
	snPortStpPortDesignatedPort
		OCTET STRING,
	snPortStpPortAdminRstp
		INTEGER,
	snPortStpPortProtocolMigration
		INTEGER,
	snPortStpPortAdminEdgePort
		INTEGER,
	snPortStpPortAdminPointToPoint
		INTEGER
	}

snPortStpVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The VLAN ID of the VLAN switch community."
	::= { snPortStpEntry 1 }

snPortStpPortNum OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The port number of the Switch.
		 The bit 0 to bit 7: port number.
		 The bit 8 to bit 11: slot number (slot for chassis only)."
	::= { snPortStpEntry 2 }

snPortStpPortPriority OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"The value of the priority field which is
	 contained in the first (in network byte order)
	 octet of the (2 octet long) Port ID.  The other
	 octet of the Port ID is given by the value of
	 dot1dStpPort."
	::= { snPortStpEntry 3 }

snPortStpPathCost OBJECT-TYPE
	SYNTAX  INTEGER (0..65535)
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"dot1dStpPortPathCost : The contribution of this
	 port to the path cost of paths towards the spanning
	 tree root which include this port.  802.1D-1990
	 recommends that the default value of this parameter
	 be in inverse proportion to the speed of the
	 attached LAN. Writing value zero to this object
	 sets path cost to a default value which automatically
	 changes according to port speed. Reading value zero
	 indicates an unknown path cost value because port
	 speed cannot be determined due to speed auto sense
	 in progress."
	::= { snPortStpEntry 4 }


snPortStpOperState OBJECT-TYPE
	SYNTAX  INTEGER {
		notActivated(0),
		activated(1)
		}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"By default, this mode is set to notActivated(0).
		 notActivated(0)...the Port STP entry is not activated and not in running mode.
		 activated(1)......the Port STP entry is activated and in running mode"
	::= { snPortStpEntry 5 }

snPortStpPortEnable OBJECT-TYPE
	SYNTAX  INTEGER {
			  enabled(1),
			  disabled(2)
			}
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
	"The enabled/disabled status of the port."
	::= { snPortStpEntry 6 }

snPortStpPortForwardTransitions OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
	"The number of times this port has transitioned
	 from the Learning state to the Forwarding state."
	::= { snPortStpEntry 7 }

snPortStpPortState OBJECT-TYPE
	SYNTAX  INTEGER {
			  disabled(1),
			  blocking(2),
			  listening(3),
			  learning(4),
			  forwarding(5),
			  broken(6),
			  preforwarding(7)
			}
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The port's current state as defined by
	 application of the Spanning Tree Protocol.  This
	 state controls what action a port takes on
	 reception of a frame.  If the bridge has detected
	 a port that is malfunctioning it will place that
	 port into the broken(6) state.  For ports which
	 are disabled (see dot1dStpPortEnable), this object
	 will have a value of disabled(1)."
	::= { snPortStpEntry 8 }

snPortStpPortDesignatedCost OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The path cost of the Designated Port of the
	 segment connected to this port.  This value is
	 compared to the Root Path Cost field in received
	 bridge PDUs."
	::= { snPortStpEntry 9 }


snPortStpPortDesignatedRoot OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The unique Bridge Identifier of the Bridge
	 recorded as the Root in the Configuration BPDUs
	 transmitted by the Designated Bridge for the
	 segment to which the port is attached."
	::= { snPortStpEntry 10 }

snPortStpPortDesignatedBridge OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The Bridge Identifier of the bridge which this
	 port considers to be the Designated Bridge for
	 this port's segment."
	::= { snPortStpEntry 11 }

snPortStpPortDesignatedPort OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (2))
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
	"The Port Identifier of the port on the Designated
	 Bridge for this port's segment."
	::= { snPortStpEntry 12 }

snPortStpPortAdminRstp OBJECT-TYPE
	SYNTAX  INTEGER {
			  true(1),
			  false(2)
			}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"Enable or disable RSTP of a port which is a member of a VLAN.
	If the VLAN is not operating in RSTP, this object will return
	FALSE(2) and this object is not writable."
	::= { snPortStpEntry 13 }

snPortStpPortProtocolMigration OBJECT-TYPE
	SYNTAX  INTEGER {
			  true(1),
			  false(2)
			}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"When operating in RSTP (version 2) mode, writing TRUE(1)
	 to this object forces this port to transmit RSTP BPDUs.
	 Any other operation on this object has no effect and
	 it always returns FALSE(2) when read."
	::= { snPortStpEntry 14 }

snPortStpPortAdminEdgePort OBJECT-TYPE
	SYNTAX  INTEGER {
			  true(1),
			  false(2)
			}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"The administrative value of the Edge Port parameter.  A
	 value of TRUE(1) indicates that this port should be
	 assumed as an edge-port and a value of FALSE(2) indicates
	 that this port should be assumed as a non-edge-port."
	::= { snPortStpEntry 15 }

snPortStpPortAdminPointToPoint OBJECT-TYPE
	SYNTAX  INTEGER {
			  true(1),
			  false(2)
			}
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
	"The administrative point-to-point status of the LAN segment
	 attached to this port.  A value of TRUE(1) indicates that
	 this port should always be treated as if it is connected to
	 a point-to-point link.  A value of FALSE(2) indicates
	 that this port should be treated as having a shared media
	 connection."
	::= { snPortStpEntry 16 }

-- Port STP Configuration Group
-- snIfStpTable is replacing snPortStpTable.
-- snIfStpPortNum is using ifIndex value to index snIfStpTable.


snIfStpTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnIfStpEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A specific snIfStpTable consists of a number of
		 switch ports. This table only exists if only if
		 snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
		 enabled for each VLAN."
	::= { snPortStpInfo 2 }

snIfStpEntry OBJECT-TYPE
	SYNTAX  SnIfStpEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the snIfStpTable indicates the
		 configuration on a specified port. A SNMP SET PDU
		 for a row of the snIfStpTable requires the entired
		 sequence of the MIB Objects in each
		 snIfStpEntry stored in one PDU.  Otherwise,
		 GENERR return-value will be returned."
	INDEX   {
			snIfStpVLanId,
			snIfStpPortNum
	}
	::= { snIfStpTable 1 }

SnIfStpEntry ::= SEQUENCE {
	snIfStpVLanId
		INTEGER,
	snIfStpPortNum
		InterfaceIndex,
	snIfStpPortPriority
		INTEGER,
	snIfStpCfgPathCost
		INTEGER,
	snIfStpOperState
		INTEGER,
	snIfStpPortState
		INTEGER,
	snIfStpPortDesignatedCost
		Integer32,
	snIfStpPortDesignatedRoot
		BridgeId,
	snIfStpPortDesignatedBridge
		BridgeId,
	snIfStpPortDesignatedPort
		OCTET STRING,
	snIfStpPortAdminRstp
		TruthValue,
	snIfStpPortProtocolMigration
		TruthValue,
	snIfStpPortAdminEdgePort
		TruthValue,
	snIfStpPortAdminPointToPoint
		TruthValue,
	snIfStpOperPathCost
		INTEGER,
	snIfStpPortRole
		INTEGER,
	snIfStpBPDUTransmitted
		Counter32,
	snIfStpBPDUReceived
		Counter32,
	snIfRstpConfigBPDUReceived
		Counter32,
	snIfRstpTCNBPDUReceived
		Counter32,
	snIfRstpConfigBPDUTransmitted
		Counter32,
	snIfRstpTCNBPDUTransmitted
		Counter32
	}

snIfStpVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID of the VLAN switch community."
	::= { snIfStpEntry 1 }

snIfStpPortNum OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port number of the Switch. It has the ifIndex value."
	::= { snIfStpEntry 2 }

snIfStpPortPriority OBJECT-TYPE
	SYNTAX  INTEGER (0..255)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"The value of the priority field which is
	 contained in the first (in network byte order)
	 octet of the (2 octet long) Port ID.  The other
	 octet of the Port ID is given by the value of
	 dot1dStpPort."
	::= { snIfStpEntry 3 }

snIfStpCfgPathCost OBJECT-TYPE
	SYNTAX  INTEGER (0..200000000)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"dot1dStpPortPathCost : The contribution of this
	 port to the path cost of paths towards the spanning
	 tree root which include this port.  802.1D-1990
	 recommends that the default value of this parameter
	 be in inverse proportion to the speed of the
	 attached LAN. Writing value zero to this object
	 sets path cost to a default value which automatically
	 changes according to port speed."
	::= { snIfStpEntry 4 }


snIfStpOperState OBJECT-TYPE
	SYNTAX  INTEGER {
		notActivated(0),
		activated(1)
		}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"By default, this mode is set to notActivated(0).
		 notActivated(0)...the Port STP entry is not activated and not in running mode.
		 activated(1)......the Port STP entry is activated and in running mode"
	::= { snIfStpEntry 5 }

snIfStpPortState OBJECT-TYPE
	SYNTAX  INTEGER {
			  disabled(1),
			  blocking(2),
			  listening(3),
			  learning(4),
			  forwarding(5),
			  broken(6),
			  preforwarding(7)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The port's current state as defined by
	 application of the Spanning Tree Protocol.  This
	 state controls what action a port takes on
	 reception of a frame.  If the bridge has detected
	 a port that is malfunctioning it will place that
	 port into the broken(6) state.  For ports which
	 are disabled (see dot1dStpPortEnable), this object
	 will have a value of disabled(1)."
	::= { snIfStpEntry 8 }

snIfStpPortDesignatedCost OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The path cost of the Designated Port of the
	 segment connected to this port.  This value is
	 compared to the Root Path Cost field in received
	 bridge PDUs."
	::= { snIfStpEntry 9 }


snIfStpPortDesignatedRoot OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The unique Bridge Identifier of the Bridge
	 recorded as the Root in the Configuration BPDUs
	 transmitted by the Designated Bridge for the
	 segment to which the port is attached."
	::= { snIfStpEntry 10 }

snIfStpPortDesignatedBridge OBJECT-TYPE
	SYNTAX  BridgeId
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The Bridge Identifier of the bridge which this
	 port considers to be the Designated Bridge for
	 this port's segment."
	::= { snIfStpEntry 11 }

snIfStpPortDesignatedPort OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (2))
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"The Port Identifier of the port on the Designated
	 Bridge for this port's segment."
	::= { snIfStpEntry 12 }

snIfStpPortAdminRstp OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"Enable or disable RSTP of a port which is a member of a VLAN.
	If the VLAN is not operating in RSTP, this object will return
	FALSE(2) and this object is not writable."
	::= { snIfStpEntry 13 }

snIfStpPortProtocolMigration OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"When operating in RSTP (version 2) mode, writing TRUE(1)
	 to this object forces this port to transmit RSTP BPDUs.
	 Any other operation on this object has no effect and
	 it always returns FALSE(2) when read."
	::= { snIfStpEntry 14 }

snIfStpPortAdminEdgePort OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"The administrative value of the Edge Port parameter.  A
	 value of TRUE(1) indicates that this port should be
	 assumed as an edge-port and a value of FALSE(2) indicates
	 that this port should be assumed as a non-edge-port."
	::= { snIfStpEntry 15 }

snIfStpPortAdminPointToPoint OBJECT-TYPE
	SYNTAX  TruthValue
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"The administrative point-to-point status of the LAN segment
	 attached to this port.  A value of TRUE(1) indicates that
	 this port should always be treated as if it is connected to
	 a point-to-point link.  A value of FALSE(2) indicates
	 that this port should be treated as having a shared media
	 connection."
	::= { snIfStpEntry 16 }

snIfStpOperPathCost OBJECT-TYPE
	SYNTAX  INTEGER (0..200000000)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"dot1dStpPortPathCost : The contribution of this
	 port to the path cost of paths towards the spanning
	 tree root which include this port.  802.1D-1990
	 recommends that the default value of this parameter
	 be in inverse proportion to the speed of the
	 attached LAN. Reading value zero indicates an unknown
	 path cost value because port speed cannot be determined
	 due to speed auto sense in progress or port link is down."
	::= { snIfStpEntry 17 }

snIfStpPortRole OBJECT-TYPE
	SYNTAX  INTEGER {
			  unknown(0),
			  alternate(1),
			  root(2),
			  designated(3),
			  backupRole(4),
			  disabledRole(5)
			}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"STP/RSTP port role."
	::= { snIfStpEntry 18 }

snIfStpBPDUTransmitted OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"STP/RSTP bridge protocol unit transmitted counter."
	::= { snIfStpEntry 19 }

snIfStpBPDUReceived OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"STP/RSTP bridge protocol unit received counter."
	::= { snIfStpEntry 20 }

snIfRstpConfigBPDUReceived OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"RSTP configuration bridge protocol unit received counter."
	::= { snIfStpEntry 21 }

snIfRstpTCNBPDUReceived OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"RSTP topology change notification bridge protocol unit received counter."
	::= { snIfStpEntry 22 }

snIfRstpConfigBPDUTransmitted OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"RSTP configuration bridge protocol unit transmitted counter."
	::= { snIfStpEntry 23 }

snIfRstpTCNBPDUTransmitted OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	"RSTP topology change notification bridge protocol unit transmitted counter."
	::= { snIfStpEntry 24 }


-- Trunk Port Configuration Group


snTrunkTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnTrunkEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A specific snTrunkTable consists of a number of
		 Trunk port-mask."
	::= { snTrunkInfo 1 }

snTrunkEntry OBJECT-TYPE
	SYNTAX  SnTrunkEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the snTrunkTable indicates the
		 configuration on a specified Trunk port membership."
	INDEX   {
		snTrunkIndex
	}
	::= { snTrunkTable 1 }

SnTrunkEntry ::= SEQUENCE {
	snTrunkIndex
		Integer32,
	snTrunkPortMask
		PortMask,
	snTrunkType
		INTEGER
	}

snTrunkIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The number of the trunk entries can be configured.
		This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore."
	::= { snTrunkEntry 1 }


snTrunkPortMask OBJECT-TYPE
	SYNTAX  PortMask
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Trunk membership of the Switch."
	::= { snTrunkEntry 2 }


snTrunkType OBJECT-TYPE
	SYNTAX  INTEGER {
		switch(1),
		server(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The trunk connection type which specifies what
		device the trunk ports are connected to."
	::= { snTrunkEntry 3 }


-- Multi-slot Trunk Port Configuration Group


snMSTrunkTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMSTrunkEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A table contains the configuration of port members of
		multi-slot trunk groups."
	::= { snTrunkInfo 2 }

snMSTrunkEntry OBJECT-TYPE
	SYNTAX  SnMSTrunkEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the snMSTrunkTable."
	INDEX {snMSTrunkPortIndex}
	::= { snMSTrunkTable 1 }

SnMSTrunkEntry ::= SEQUENCE {
	snMSTrunkPortIndex
		Integer32,
	snMSTrunkPortList
		OCTET STRING,
	snMSTrunkType
		INTEGER,
	snMSTrunkRowStatus
		INTEGER
	}

snMSTrunkPortIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The primary port of a trunk group. For module with Gig ports,
		primary port is port 1, 3, 5, 7. For module with 10/100 ports,
		primary port is port 1, 5, 9, 13, 17, 21."
	::= { snMSTrunkEntry 1 }


snMSTrunkPortList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of port indices which are the port membership
		of a trunk group. Each port index is a 16-bit integer
		in big endian order. The first port index must be the
		primary port index."
	::= { snMSTrunkEntry 2 }


snMSTrunkType OBJECT-TYPE
	SYNTAX  INTEGER {
		switch(1),
		server(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The trunk connection type which specifies what
		device the trunk ports are connected to."
	::= { snMSTrunkEntry 3 }


snMSTrunkRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a table entry."
	::= { snMSTrunkEntry 4 }

-- Multi-slot Trunk Port Configuration Group


snMSTrunkIfTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMSTrunkIfEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A table contains the configuration of port members of
		multi-slot trunk groups."
	::= { snTrunkInfo 3 }

snMSTrunkIfEntry OBJECT-TYPE
	SYNTAX  SnMSTrunkIfEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the snMSTrunkIfTable."
	INDEX {snMSTrunkIfIndex}
	::= { snMSTrunkIfTable 1 }

SnMSTrunkIfEntry ::= SEQUENCE {
	snMSTrunkIfIndex
		Integer32,
	snMSTrunkIfList
		OCTET STRING,
	snMSTrunkIfType
		INTEGER,
	snMSTrunkIfRowStatus
		INTEGER
	}

snMSTrunkIfIndex OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The primary port(IfIndex) of a trunk group. For module with Gig ports,
		primary port is port 1, 3, 5, 7. For module with 10/100 ports,
		primary port is port 1, 5, 9, 13, 17, 21."
	::= { snMSTrunkIfEntry 1 }

snMSTrunkIfList OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A list of interface indices which are the port membership
		of a trunk group. Each interface index is a 16-bit integer
		in big endian order. The first interface/port index must be
		the primary port(ifIndex) index."
	::= { snMSTrunkIfEntry 2 }

snMSTrunkIfType OBJECT-TYPE
	SYNTAX  INTEGER {
		switch(1),
		server(2)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The trunk connection type which specifies what
		device the trunk ports are connected to."
	::= { snMSTrunkIfEntry 3 }

snMSTrunkIfRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a table entry."
	::= { snMSTrunkIfEntry 4 }



-- Switch Configuration Summary Group


snSwSummaryMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The Switch Group Configuration Summary is configured
		 either enabled or disabled and the
		 default is disabled mode.
		 enabled(1)...........activate Switch Configuration Summary.
		 disabled(0)..........no Switch Configuration Summary."
	::= { snSwSummary 1 }


--- DHCP Gateway List Table


snDhcpGatewayListTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnDhcpGatewayListEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A table of DHCP gateway list of addresses."
	::= { snDhcpGatewayListInfo 1 }

snDhcpGatewayListEntry             OBJECT-TYPE
	SYNTAX  SnDhcpGatewayListEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IP Port Address table."
	INDEX   { snDhcpGatewayListId }
	::= { snDhcpGatewayListTable 1 }

SnDhcpGatewayListEntry ::= SEQUENCE {
	snDhcpGatewayListId
		INTEGER,
	snDhcpGatewayListAddrList
		OCTET STRING,
	snDhcpGatewayListRowStatus
		INTEGER
	}


snDhcpGatewayListId                 OBJECT-TYPE
	SYNTAX  INTEGER (1..32)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The ID for a DHCP gateway list entry."
	::= { snDhcpGatewayListEntry 1 }

snDhcpGatewayListAddrList          OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(4..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The DHCP gateway address list for each DHCP gateway list ID.
		This list contains 1 to 8 IP addresses represented by octet string."
	::= { snDhcpGatewayListEntry 2 }

snDhcpGatewayListRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row or modifies an exsisting row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snDhcpGatewayListEntry 3 }


-- DNS MIB Group
-- snDnsDomainName and snDnsGatewayIpAddrList are deprecated, replaced
-- by fdryDnsDomainNameTable and fdryDnsServerAddressTable respectively.
-- The new table "fdryDnsDomainNameTable" and "fdryDnsServerAddressTable"
-- combines Ipv4 and Ipv6 DNS Servers configuration

snDnsDomainName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..80))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"DNS Domain Name string."
	::= { snDnsInfo 1 }

snDnsGatewayIpAddrList OBJECT-TYPE
	SYNTAX	OCTET STRING (SIZE(16))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The DNS Gateway IP address list. This list contains 4
		IP addresses represented by octet string."
	::= { snDnsInfo 2 }

-- MAC filter table

snMacFilterTable       OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMacFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"MAC filter table."
	::= { snMacFilter 1 }

snMacFilterEntry       OBJECT-TYPE
	SYNTAX  SnMacFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the MAC filter table."
	INDEX   { snMacFilterIndex }
	::= { snMacFilterTable 1 }

SnMacFilterEntry ::= SEQUENCE {
	snMacFilterIndex
		Integer32,
	snMacFilterAction
		INTEGER,
	snMacFilterSourceMac
		MacAddress,
	snMacFilterSourceMask
		MacAddress,
	snMacFilterDestMac
		MacAddress,
	snMacFilterDestMask
		MacAddress,
	snMacFilterOperator
		INTEGER,
	snMacFilterFrameType
		INTEGER,
	snMacFilterFrameTypeNum
		INTEGER,
	snMacFilterRowStatus
		INTEGER
	}

snMacFilterIndex       OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for a filter entry."
	::= { snMacFilterEntry 1 }

snMacFilterAction      OBJECT-TYPE
	SYNTAX  INTEGER { deny(0), permit(1) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if the Mac packet match
		with this filter."
	::= { snMacFilterEntry 2 }

snMacFilterSourceMac    OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Source MAC address."
	::= { snMacFilterEntry 3 }

snMacFilterSourceMask  OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Source MAC subnet mask."
	::= { snMacFilterEntry 4 }

snMacFilterDestMac      OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Destination MAC address."
	::= { snMacFilterEntry 5 }

snMacFilterDestMask    OBJECT-TYPE
	SYNTAX  MacAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Destination MAC subnet mask."
	::= { snMacFilterEntry 6 }

snMacFilterOperator    OBJECT-TYPE
	SYNTAX  INTEGER { equal(0), notEqual(1), less(2), greater(3) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Type of comparison to perform."
	::= { snMacFilterEntry 7 }

snMacFilterFrameType     OBJECT-TYPE
	SYNTAX  INTEGER{ notUsed(0), ethernet(1), llc(2), snap(3) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Frame Type: ethernet-type, LLC and SNAP types"
	::= { snMacFilterEntry 8 }

snMacFilterFrameTypeNum     OBJECT-TYPE
	SYNTAX  INTEGER(0..65535)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Frame Type Number. 0 means NA"
	::= { snMacFilterEntry 9 }

snMacFilterRowStatus   OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snMacFilterEntry 10 }

-- MAC Filter Port access table

snMacFilterPortAccessTable           OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMacFilterPortAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"MAC Filter port access table."
	::= { snMacFilter 2 }

snMacFilterPortAccessEntry           OBJECT-TYPE
	SYNTAX  SnMacFilterPortAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  deprecated
	DESCRIPTION
		"An entry in the MAC Filter Port access table."
	INDEX   { snMacFilterPortAccessPortIndex }
	::= { snMacFilterPortAccessTable 1 }

SnMacFilterPortAccessEntry ::= SEQUENCE {
	snMacFilterPortAccessPortIndex
		INTEGER,
	snMacFilterPortAccessFilters
		OCTET STRING,
	snMacFilterPortAccessRowStatus
		INTEGER
	}

snMacFilterPortAccessPortIndex               OBJECT-TYPE
	SYNTAX  INTEGER (1..3900)
	MAX-ACCESS  read-only
	STATUS  deprecated
	DESCRIPTION
		"The port index.
		For FastIron/NetIron products, port index value is from 1 to 42
		For BigIron products, port index is an encoded number:
		The bit 0 to bit 7: port number.
		The bit 8 to bit 11: slot number.
		For virtual router interface, slot number is 15,
		port number is the virtual router port from 1 to 60.
		Therefore, port index value for BigIron is from 257 to 3900."
	::= { snMacFilterPortAccessEntry 1 }

snMacFilterPortAccessFilters                 OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  deprecated
	DESCRIPTION
		"1st octet correspond to 1st filter
		number and so on."
	::= { snMacFilterPortAccessEntry 2 }

snMacFilterPortAccessRowStatus       OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4)
	}
	MAX-ACCESS	 read-write
	STATUS   deprecated
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snMacFilterPortAccessEntry 3 }

-- MAC Filter Port access table

snMacFilterIfAccessTable           OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnMacFilterIfAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"MAC Filter port access table."
	::= { snMacFilter 3 }

snMacFilterIfAccessEntry           OBJECT-TYPE
	SYNTAX  SnMacFilterIfAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the MAC Filter Port access table."
	INDEX   { snMacFilterIfAccessPortIndex }
	::= { snMacFilterIfAccessTable 1 }

SnMacFilterIfAccessEntry ::= SEQUENCE {
	snMacFilterIfAccessPortIndex
		InterfaceIndex,
	snMacFilterIfAccessFilters
		OCTET STRING,
	snMacFilterIfAccessRowStatus
		INTEGER
	}

snMacFilterIfAccessPortIndex               OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port/interface index."
	::= { snMacFilterIfAccessEntry 1 }

snMacFilterIfAccessFilters                 OBJECT-TYPE
	SYNTAX  OCTET STRING
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"1st octet correspond to 1st filter number and so on."
	::= { snMacFilterIfAccessEntry 2 }

snMacFilterIfAccessRowStatus       OBJECT-TYPE
	SYNTAX	INTEGER {
				invalid(1),
				valid(2),
				delete(3),
				create(4)
			}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snMacFilterIfAccessEntry 3 }

-- NTP general group

snNTPGeneral               OBJECT IDENTIFIER ::= { snNTP 1 }

snNTPPollInterval          OBJECT-TYPE
	SYNTAX  INTEGER (1..65535)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Interval specifies how often to poll the NTP server.
		Each unit is one second.
		This object is not supported in NI devices from R5.3"
	DEFVAL  { 1800 }
	::= { snNTPGeneral 1 }

snNTPTimeZone              OBJECT-TYPE
	SYNTAX  INTEGER {
				alaska(0),
				aleutian(1),
				arizona(2),
				central(3),
				eastIndiana(4),
				eastern(5),
				hawaii(6),
				michigan(7),
				mountain(8),
				pacific(9),
				samoa(10),
				gmtPlus1200(11),
				gmtPlus1100(12),
				gmtPlus1000(13),
				gmtPlus0900(14),
				gmtPlus0800(15),
				gmtPlus0700(16),
				gmtPlus0600(17),
				gmtPlus0500(18),
				gmtPlus0400(19),
				gmtPlus0300(20),
				gmtPlus0200(21),
				gmtPlus0100(22),
				gmt(23),
				gmtMinus0100(24),
				gmtMinus0200(25),
				gmtMinus0300(26),
				gmtMinus0400(27),
				gmtMinus0500(28),
				gmtMinus0600(29),
				gmtMinus0700(30),
				gmtMinus0800(31),
				gmtMinus0900(32),
				gmtMinus1000(33),
				gmtMinus1100(34),
				gmtMinus1200(35),
				gmtPlus1130(36),
				gmtPlus1030(37),
				gmtPlus0930(38),
				gmtPlus0630(39),
				gmtPlus0530(40),
				gmtPlus0430(41),
				gmtPlus0330(42),
				gmtMinus0330(43),
				gmtMinus0830(44),
				gmtMinus0930(45)
			}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Time zone."
	DEFVAL  { gmt }
	::= { snNTPGeneral 2 }

snNTPSummerTimeEnable      OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled (1) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/Disable daylight saving time. This enables daylight
		saving time for time/date starting 02:00:00 of first Sunday
		in April and ending 02:00:00 of last Sunday in October every
		year."
	DEFVAL  { disabled }
	::= { snNTPGeneral 3 }

snNTPSystemClock           OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (7))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"System clock, in the following format:
		octet   0: seconds after the minute [0-60]
		octet   1: minutes after the hour [0-59]
		octet   2: hours since midnight [0-23]
		octet   3: day of the month [1-31]
		octet   4: months since January [0-11]
		octet   5: years since 1900
		octet   6: days since Sunday [0-6]
		Setting this object requires valid value in octets 0 to 5,
		and zero in octet 6. System clock can be disabled by setting
		zero to all octets."
	::= { snNTPGeneral 4 }

snNTPSync                  OBJECT-TYPE
	SYNTAX  INTEGER { other(1), synchronize(2) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Initiate time synchronization to the NTP servers.
		For set operation, only 'synchronize(2)' is accepted.
		For get operation, always return 'other(1)'.
		This object is not supported in NI devices from R5.3"
	::= { snNTPGeneral 5 }

-- NTP server table
-- snNTPServerTable is deprecated, replaced by fdrySntpServerTable.
-- The new table "fdrySntpServerTable" combines Ipv4 and Ipv6 Simple Network Time Protocol server configuration.

snNTPServerTable           OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnNTPServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"NTP (Network Time Protocol) server table."
	::= { snNTP 2 }

snNTPServerEntry           OBJECT-TYPE
	SYNTAX  SnNTPServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the NTP server table."
	INDEX   { snNTPServerIp }
	::= { snNTPServerTable 1 }

SnNTPServerEntry ::= SEQUENCE {
	snNTPServerIp
		IpAddress,
	snNTPServerVersion
		INTEGER,
	snNTPServerRowStatus
		INTEGER
	}

snNTPServerIp              OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"NTP server IP address."
	::= { snNTPServerEntry 1 }

snNTPServerVersion         OBJECT-TYPE
	SYNTAX  INTEGER (1..4)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"NTP server version."
	DEFVAL  { 1 }
	::= { snNTPServerEntry 2 }

snNTPServerRowStatus       OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a NTP server table entry."
	::= { snNTPServerEntry 3 }

-- Radius general group

snRadiusGeneral            OBJECT IDENTIFIER ::= { snRadius 1 }

snRadiusSNMPAccess         OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Indicate whether Radius group MIB obejcts can be
		accessed by SNMP manager. If value is disabled,
		all Radius group MIB objects return 'general error'."
	DEFVAL  { disabled }
	::= { snRadiusGeneral 1 }

snRadiusEnableTelnetAuth   OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enable/Disable telnet authentication specified
		by 'snRadiusLoginMethod'."
	DEFVAL  { disabled }
	::= { snRadiusGeneral 2 }

snRadiusRetransmit         OBJECT-TYPE
	SYNTAX  INTEGER (0..5)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The number of authentication query retransmissions
		to the Radius server."
	DEFVAL  { 3 }
	::= { snRadiusGeneral 3 }

snRadiusTimeOut            OBJECT-TYPE
	SYNTAX  INTEGER (1..60)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Interval specifies how long to wait for authentication
		reply from the Radius server, each unit is one second."
	DEFVAL  { 3 }
	::= { snRadiusGeneral 4 }

snRadiusDeadTime           OBJECT-TYPE
	SYNTAX  INTEGER (1..5)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Interval specifies Radius server dead time,
		each unit is one minute."
	DEFVAL  { 3 }
	::= { snRadiusGeneral 5 }

snRadiusKey                OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication key displayed as encrypted text.
		Write operation can only be done if the SET request uses
		SNMPv3 with data encrypted using privacy key.
		FastIron and NetIron platforms support keysize upto 64 characters."
	::= { snRadiusGeneral 6 }

snRadiusLoginMethod        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user login process. Each octet
		has the following enumeration value:
		  enable(1) - authenticate by command line interface
					  enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 7 }

snRadiusEnableMethod       OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user entering priviledge mode
		of the command line interface. Each octet has the following
		enumeration value:
		  enable(1) - authenticate by command line interface
					  enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 8 }

snRadiusWebServerMethod    OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user accessing the web-server.
		Each octet has the following enumeration value:
		  enable(1) - authenticate by command line interface
					  enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 9 }

snRadiusSNMPServerMethod   OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..7))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of authentication methods. Each octet represents
		a method to authenticate the user accessing the snmp-server.
		Each octet has the following enumeration value:
		  enable(1) - authenticate by command line interface
					  enable password
		  radius(2) - authenticate by requesting radius server
		  local(3) - authenticate by local user account table
		  line(4) - authenticate by telnet password
		  tacplus(5) - authenticate by requesting tacplus server
		  none(6) - do not authenticate
		  tacacs(7) - authenticate by requesting tacacs server
		Setting a zero length octet string invalidates all
		previous authentication methods."
	::= { snRadiusGeneral 10 }

-- Radius server table
-- snRadiusServerTable is deprecated, replaced by fdryRadiusServerTable
-- The new table "fdryRadiusServerTable" combines Ipv4 and Ipv6 Radius Authentication Servers configuration

snRadiusServerTable        OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRadiusServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Radius server table."
	::= { snRadius 2 }

snRadiusServerEntry        OBJECT-TYPE
	SYNTAX  SnRadiusServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the Radius server table."
	INDEX   { snRadiusServerIp }
	::= { snRadiusServerTable 1 }

SnRadiusServerEntry ::= SEQUENCE {
	snRadiusServerIp
		IpAddress,
	snRadiusServerAuthPort
		Integer32,
	snRadiusServerAcctPort
		Integer32,
	snRadiusServerRowStatus
		INTEGER,
	snRadiusServerRowKey
		DisplayString,
	snRadiusServerUsage
		INTEGER
	}

snRadiusServerIp           OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Radius server IP address."
	::= { snRadiusServerEntry 1 }

snRadiusServerAuthPort     OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication UDP port number."
	DEFVAL  { 1812 }
	::= { snRadiusServerEntry 2 }

snRadiusServerAcctPort     OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Account UDP port number."
	DEFVAL  { 1813 }
	::= { snRadiusServerEntry 3 }

snRadiusServerRowStatus    OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a Radius server table entry."
	::= { snRadiusServerEntry 4 }

snRadiusServerRowKey       OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication key displayed as encrypted text.
		FastIron and NetIron platforms support keysize upto 64 characters."
	::= { snRadiusServerEntry 5 }

snRadiusServerUsage    OBJECT-TYPE
	SYNTAX	INTEGER {
		default(1),
		authenticationOnly(2),
		authorizationOnly(3),
		accountingOnly(4) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To allow this server to be dedicated for a particular AAA activity."
	::= { snRadiusServerEntry 6 }

--- Tacacs General MIBs

snTacacsGeneral            OBJECT IDENTIFIER ::= { snTacacs 1 }

snTacacsRetransmit         OBJECT-TYPE
	SYNTAX  INTEGER (0..5)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The number of authentication query retransmissions
		to the Tacacs server."
	DEFVAL  { 3 }
	::= { snTacacsGeneral 1 }

snTacacsTimeOut            OBJECT-TYPE
	SYNTAX  INTEGER (1..15)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Interval specifies how long to wait for authentication
		reply from the Tacacs server, each unit is one second."
	DEFVAL  { 3 }
	::= { snTacacsGeneral 2 }

snTacacsDeadTime           OBJECT-TYPE
	SYNTAX  INTEGER (1..5)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Interval specifies Tacacs server dead time,
		each unit is one minute."
	DEFVAL  { 3 }
	::= { snTacacsGeneral 3 }

snTacacsKey                OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication key displayed as encrypted text.
		Write operation can only be done if the SET request uses
		SNMPv3 with data encrypted using privacy key.
		FastIron and NetIron platforms support keysize upto 64 characters."
	::= { snTacacsGeneral 4 }

snTacacsSNMPAccess         OBJECT-TYPE
	SYNTAX  INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Indicate whether Tacacs group MIB obejcts can be
		accessed by SNMP manager. If value is disabled,
		all Tacacs group MIB objects return 'general error'."
	DEFVAL  { disabled }
	::= { snTacacsGeneral 5 }

-- Tacacs server table
-- snTacacsServerTable is deprecated, replaced by fdryTacacsServerTable
-- The new table "fdryTacacsServerTable" combines Ipv4 and Ipv6 Tacacs Authentication Servers configuration

snTacacsServerTable        OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnTacacsServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Tacacs server table."
	::= { snTacacs 2 }

snTacacsServerEntry        OBJECT-TYPE
	SYNTAX  SnTacacsServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the Tacacs server table."
	INDEX   { snTacacsServerIp }
	::= { snTacacsServerTable 1 }

SnTacacsServerEntry ::= SEQUENCE {
	snTacacsServerIp
		IpAddress,
	snTacacsServerAuthPort
		Integer32,
	snTacacsServerRowStatus
		INTEGER,
	snTacacsServerRowKey
		DisplayString,
	snTacacsServerUsage
		INTEGER
	}

snTacacsServerIp           OBJECT-TYPE
	SYNTAX  IpAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Tacacs server IP address."
	::= { snTacacsServerEntry 1 }

snTacacsServerAuthPort     OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication UDP port number."
	DEFVAL  { 49 }
	::= { snTacacsServerEntry 2 }

snTacacsServerRowStatus    OBJECT-TYPE
	SYNTAX	INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To create or delete a Tacacs server table entry."
	::= { snTacacsServerEntry 3 }

snTacacsServerRowKey       OBJECT-TYPE
	SYNTAX  DisplayString
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Authentication key displayed as encrypted text.
		Write operation can only be done if the SET request uses
		SNMPv3 with data encrypted using privacy key.
		FastIron and NetIron platforms support keysize upto 64 characters."
	::= { snTacacsServerEntry 4 }

snTacacsServerUsage    OBJECT-TYPE
	SYNTAX	INTEGER {
		default(1),
		authenticationOnly(2),
		authorizationOnly(3),
		accountingOnly(4) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"To allow this server to be dedicated for a particular AAA activity."
	::= { snTacacsServerEntry 5 }

-- QOS Profile Group

snQosProfileTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnQosProfileEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A table contains the configuration of qos profile
		 groups."
	::= { snQos 1 }

snQosProfileEntry OBJECT-TYPE
	SYNTAX  SnQosProfileEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the snQosProfileTable."
	INDEX {snQosProfileIndex}
	::= { snQosProfileTable 1 }

SnQosProfileEntry ::= SEQUENCE {
	snQosProfileIndex
		INTEGER,
	snQosProfileName
		DisplayString,
	snQosProfileRequestedBandwidth
		INTEGER,
	snQosProfileCalculatedBandwidth
		INTEGER
	}

snQosProfileIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..8)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index of QOS Profile."
	::= { snQosProfileEntry 1 }

snQosProfileName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE(0..32))
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Qos Profile Name string."
	::= { snQosProfileEntry 2 }

snQosProfileRequestedBandwidth OBJECT-TYPE
	SYNTAX  INTEGER (0..100)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Qos Profile Requested Bandwidth."
	::= { snQosProfileEntry 3 }

snQosProfileCalculatedBandwidth OBJECT-TYPE
	SYNTAX  INTEGER (0..100)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Qos Profile Calculated Bandwidth."
	::= { snQosProfileEntry 4 }

-- QOS Bind Group

snQosBindTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnQosBindEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A table contains the configuration of 802.1p to qos profile
		 binding groups."
	::= { snQos 2 }

snQosBindEntry OBJECT-TYPE
	SYNTAX  SnQosBindEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the snQosBindTable."
	INDEX {snQosBindIndex}
	::= { snQosBindTable 1 }

SnQosBindEntry ::= SEQUENCE {
	snQosBindIndex
		INTEGER,
	snQosBindPriority
		Integer32,
	snQosBindProfileIndex
		INTEGER
	}

snQosBindIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..8)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index of QOS Bind."
	::= { snQosBindEntry 1 }

snQosBindPriority OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		 "QOS bind priority."
	::= { snQosBindEntry 2 }

snQosBindProfileIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..8)
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"QOS Bind Profile Index. This is pointer to the
		index of snQosProfile Table."
	::= { snQosBindEntry 3 }

-- Denial of service attack

snDosAttack       OBJECT IDENTIFIER ::= { snQos 3 }
snDosAttackGlobal OBJECT IDENTIFIER ::= { snDosAttack 1 }

snDosAttackICMPDropCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"ICMP drop counter."
	::= { snDosAttackGlobal 1 }

snDosAttackICMPBlockCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"ICMP block counter."
	::= { snDosAttackGlobal 2 }

snDosAttackSYNDropCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"SYN drop counter."
	::= { snDosAttackGlobal 3 }

snDosAttackSYNBlockCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"SYN block counter."
	::= { snDosAttackGlobal 4 }

snDosAttackPortTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnDosAttackPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"Denial of service attack port table."
	::= { snDosAttack 2 }

snDosAttackPortEntry OBJECT-TYPE
	SYNTAX  SnDosAttackPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry of the denial of service attack port table."
	INDEX {snDosAttackPort}
	::= { snDosAttackPortTable 1 }

SnDosAttackPortEntry ::= SEQUENCE {
	snDosAttackPort
		Integer32,
	snDosAttackPortICMPDropCount
		Counter32,
	snDosAttackPortICMPBlockCount
		Counter32,
	snDosAttackPortSYNDropCount
		Counter32,
	snDosAttackPortSYNBlockCount
		Counter32
	}

snDosAttackPort OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"ifIndex value of a port."
	::= { snDosAttackPortEntry 1 }

snDosAttackPortICMPDropCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"ICMP drop counter."
	::= { snDosAttackPortEntry 2 }

snDosAttackPortICMPBlockCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"ICMP block counter."
	::= { snDosAttackPortEntry 3 }

snDosAttackPortSYNDropCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"SYN drop counter."
	::= { snDosAttackPortEntry 4 }

snDosAttackPortSYNBlockCount OBJECT-TYPE
	SYNTAX  Counter32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"SYN block counter."
	::= { snDosAttackPortEntry 5 }

-- AAA Mib

snAuthentication			OBJECT IDENTIFIER ::= { snAAA 1 }
snAuthorization				OBJECT IDENTIFIER ::= { snAAA 2 }
snAccounting				OBJECT IDENTIFIER ::= { snAAA 3 }

snAuthorizationCommandMethods        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of authorization methods. Each octet represents
		a method to authorize the user command. Each octet
		has the following value:
		  radius(2) - authorize by requesting radius server
		  tacplus(5) - authorize by requesting tacplus server
		  none(6) - skip authorization
		Setting a zero length octet string invalidates all
		previous authorization methods."
	::= { snAuthorization 1 }

snAuthorizationCommandLevel OBJECT-TYPE
	SYNTAX  INTEGER {
				 level0(0),
				 level4(4),
				 level5(5)
					}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Commands, which are equal to and less than the specified
		command level here needs to be authorized. Possible enumeration
		values:
		0 - Privilege level 0
		4 - Privilege level 4
		5 - Privilege level 5."
	::= { snAuthorization 2 }

snAuthorizationExec        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of exec authorization methods. Each octet represents
		a method for telnet or SSH login authorization. Each octet
		has the following enumeration value:
		  radius(2) - send exec authorization request to radius server
		  tacplus(5) - send exec authorization request to tacplus server
		  none(6) - no exec authorization
		Setting a zero length octet string invalidates all
		authorization methods."
	::= { snAuthorization 3 }


snAccountingCommandMethods        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method to account for the user command. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 1 }

snAccountingCommandLevel OBJECT-TYPE
	SYNTAX  INTEGER {
				 level0(0),
				 level4(4),
				 level5(5)
					}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Commands, which are equal to and less than the specified
		command level here will be accounted. Possible enumeration
		values:
		level0 - Privilege level 0
		level4 - Privilege level 4
		level5 - Privilege level 5."
	::= { snAccounting 2 }

snAccountingExec        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method for telnet or SSH login accounting. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 3 }

snAccountingSystem        OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE(0..3))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"A sequence of accounting methods. Each octet represents
		a method to account for the system related events. Each octet
		has the following enumeration value:
		  radius(2) - send accounting info to radius server
		  tacplus(5) - send accounting info to tacplus server
		  none(6) - skip accounting
		Setting a zero length octet string invalidates all
		previous accounting methods."
	::= { snAccounting 4 }

-- NetFlow Mib

snNetFlowGlb	OBJECT IDENTIFIER ::= { snNetFlow 1 }

snNetFlowGblEnable OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Enable/disable NetFlow export operation."
	DEFVAL { disabled }
	::= { snNetFlowGlb 1 }

snNetFlowGblVersion OBJECT-TYPE
	SYNTAX	INTEGER { versionNotSet (0), version1 (1), version5 (5) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"NetFlow export version."
	DEFVAL { version5 }
	::= { snNetFlowGlb 2 }

snNetFlowGblProtocolDisable OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"bit 0 - other, disable all protocols export except UDP and TCP
		 bit 1 - tcp, disable TCP protocol export
		 bit 2 - udp, disable UDP protocol export"
	DEFVAL { 0 }
	::= { snNetFlowGlb 3 }

snNetFlowGblActiveTimeout OBJECT-TYPE
	SYNTAX	Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)"
	DEFVAL { 60 }
	::= { snNetFlowGlb 4 }

snNetFlowGblInactiveTimeout OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)"
	DEFVAL { 60 }
	::= { snNetFlowGlb 5 }


-- NetFlow Collector Table


snNetFlowCollectorTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowCollectorEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table of each NetFlow collector information."
	::= { snNetFlow 2 }

snNetFlowCollectorEntry OBJECT-TYPE
	SYNTAX	SnNetFlowCollectorEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the NetFlow collector table."
	INDEX	{ snNetFlowCollectorIndex }
	::= { snNetFlowCollectorTable 1 }

SnNetFlowCollectorEntry ::= SEQUENCE {
	snNetFlowCollectorIndex
		INTEGER,
	snNetFlowCollectorIp
		IpAddress,
	snNetFlowCollectorUdpPort
		Integer32,
	snNetFlowCollectorSourceInterface
		InterfaceIndex,
	snNetFlowCollectorRowStatus
		INTEGER
	}

snNetFlowCollectorIndex OBJECT-TYPE
	SYNTAX	INTEGER (1..10)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index to the NetFlow collector table."
	::= { snNetFlowCollectorEntry 1 }

snNetFlowCollectorIp OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The NetFlow collector ip address."
	::= { snNetFlowCollectorEntry 2 }

snNetFlowCollectorUdpPort OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The NetFlow collector UDP port number."
	::= { snNetFlowCollectorEntry 3 }

snNetFlowCollectorSourceInterface OBJECT-TYPE
	SYNTAX	InterfaceIndex
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The ifIndex value to specify source port to
		 export NetFlow packet. Value 0 to indicate
		 default outgoing port."
	::= { snNetFlowCollectorEntry 4 }


snNetFlowCollectorRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		other(1),
		valid(2),
		delete(3),
		create(4) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"To create or delete a NetFlow collector table entry."
	::= { snNetFlowCollectorEntry 5 }



-- NetFlow Aggregation Table


snNetFlowAggregationTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowAggregationEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A table of each NetFlow aggregation scheme information."
	::= { snNetFlow 3 }

snNetFlowAggregationEntry OBJECT-TYPE
	SYNTAX	SnNetFlowAggregationEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the NetFlow Aggregation table."
	INDEX	{ snNetFlowAggregationIndex }
	::= { snNetFlowAggregationTable 1 }

SnNetFlowAggregationEntry ::= SEQUENCE {
	snNetFlowAggregationIndex
		INTEGER,
	snNetFlowAggregationIp
		IpAddress,
	snNetFlowAggregationUdpPort
		Integer32,
	snNetFlowAggregationSourceInterface
		InterfaceIndex,
	snNetFlowAggregationNumberOfCacheEntries
		Integer32,
	snNetFlowAggregationActiveTimeout
		Integer32,
	snNetFlowAggregationInactiveTimeout
		Integer32,
	snNetFlowAggregationEnable
		INTEGER,
	snNetFlowAggregationRowStatus
		INTEGER
	}

snNetFlowAggregationIndex OBJECT-TYPE
	SYNTAX	INTEGER { as (1), protocolPort (2), destPrefix (3),
					 sourcePrefix (4), prefix (5) }
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The Aggregation scheme ID"
	::= { snNetFlowAggregationEntry 1 }

snNetFlowAggregationIp OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The NetFlow aggregation collector ip address."
	::= { snNetFlowAggregationEntry 2 }

snNetFlowAggregationUdpPort OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The NetFlow aggregation collector UDP port number."
	::= { snNetFlowAggregationEntry 3 }

snNetFlowAggregationSourceInterface OBJECT-TYPE
	SYNTAX	InterfaceIndex
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The ifIndex value to specify source port to
		 export NetFlow aggregation packet.
		 Value 0 to indicate default outgoing port."
	::= { snNetFlowAggregationEntry 4 }

snNetFlowAggregationNumberOfCacheEntries OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Number of cache entries for aggregation scheme"
	::= { snNetFlowAggregationEntry 5 }

snNetFlowAggregationActiveTimeout OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Maximum time an active flow can be in
		 the aggregation cache"
	::= { snNetFlowAggregationEntry 6 }

snNetFlowAggregationInactiveTimeout OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Maximum time an inactive flow can be in
		 the aggregation cache"
	::= { snNetFlowAggregationEntry 7 }

snNetFlowAggregationEnable OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Enable/disable NetFlow aggregation
		 for this aggregation scheme."
	DEFVAL { disabled }
	::= {  snNetFlowAggregationEntry 8 }

snNetFlowAggregationRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		other(1),
		valid(2),
		delete(3),
		create(4) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"To create or delete a NetFlow collector table entry."
	::= { snNetFlowAggregationEntry 9 }


-- NetFlow Interface Table

-- Table containing information about the switching
-- type in every interface.

snNetFlowIfTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnNetFlowIfEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A list of interface entries.  The number of entries
		 is given by the value of ifNumber."
	::= { snNetFlow 4 }

snNetFlowIfEntry OBJECT-TYPE
	SYNTAX	SnNetFlowIfEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"Entry containing the type of switching performed
		 on that interface."
	INDEX	{ snNetFlowIfIndex }
	::= { snNetFlowIfTable 1 }

SnNetFlowIfEntry ::= SEQUENCE {
	snNetFlowIfIndex
		InterfaceIndex,
	snNetFlowIfFlowSwitching
		INTEGER
	}

 snNetFlowIfIndex OBJECT-TYPE
	   SYNTAX      InterfaceIndex
	   MAX-ACCESS      read-only
	   STATUS      current
	   DESCRIPTION
		   "A unique value, greater than zero, for each
			interface.  It is recommended that values are assigned
			contiguously starting from 1.  The value for each
			interface sub-layer must remain constant at least from
			one re-initialization of the entity's network
			management system to the next re-initialization."
	   ::= { snNetFlowIfEntry 1 }

snNetFlowIfFlowSwitching OBJECT-TYPE
	   SYNTAX      INTEGER { disabled (0), enabled (1) }
	   MAX-ACCESS      read-write
	   STATUS      current
	   DESCRIPTION
		   "To enable/disable flow switching in a particular
			interface:
			disable (0) - no flow switching
			enable  (1) - flow switching"
	   ::= { snNetFlowIfEntry 2 }

-- sFlow Collector Table.

snSFlowGlb	OBJECT IDENTIFIER ::= { snSFlow 1 }

snSflowCollectorTable     OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnSflowCollectorEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"Table of all but first sFlow collectors. The first collector can be configured
		using sFlowTable in RFC 3176. The RFC cannot be used to configure more
		than one sFlow collectors. This table has been created to fill this gap."
	::= { snSFlow 2 }

snSflowCollectorEntry	OBJECT-TYPE
	SYNTAX	SnSflowCollectorEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"A row in the sFlow collector table."
	INDEX	{ snSflowCollectorIndex }
	::= { snSflowCollectorTable 1 }

SnSflowCollectorEntry ::= SEQUENCE {
	snSflowCollectorIndex
		Integer32,
	snSflowCollectorIP
		IpAddress,
	snSflowCollectorUDPPort
		Integer32,
	snSflowCollectorRowStatus
		INTEGER
	}

snSflowCollectorIndex  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index to the sFlow collector table."
	::= { snSflowCollectorEntry 1 }

snSflowCollectorIP OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The sFlow collector ip address."
	::= { snSflowCollectorEntry 2 }

snSflowCollectorUDPPort OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The sFlow collector UDP port number."
	::= { snSflowCollectorEntry 3 }

snSflowCollectorRowStatus OBJECT-TYPE
	SYNTAX	INTEGER	{
		noSuch(0),
		other(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"To create, update or delete a SFlow collector table entry.
		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= { snSflowCollectorEntry 4 }


snFdpMIBObjects OBJECT IDENTIFIER ::= { snFDP 1 }

snFdpInterface   OBJECT IDENTIFIER ::= { snFdpMIBObjects 1 }
snFdpCache       OBJECT IDENTIFIER ::= { snFdpMIBObjects 2 }
snFdpGlobal      OBJECT IDENTIFIER ::= { snFdpMIBObjects 3 }
snFdpCachedAddr  OBJECT IDENTIFIER ::= { snFdpMIBObjects 4 }

--
-- FDP Interface Group
--
snFdpInterfaceTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF FdpInterfaceEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Status of FDP on the device's interfaces."
	::= { snFdpInterface 1 }

snFdpInterfaceEntry OBJECT-TYPE
	SYNTAX     FdpInterfaceEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snFdpInterfaceTable,
			having the status of FDP on an interface."
	INDEX      { snFdpInterfaceIfIndex }
	::= { snFdpInterfaceTable 1 }

FdpInterfaceEntry ::= SEQUENCE {
	snFdpInterfaceIfIndex           InterfaceIndex,
	snFdpInterfaceFdpEnable            INTEGER,
	snFdpInterfaceCdpEnable            INTEGER
}

snFdpInterfaceIfIndex OBJECT-TYPE
	SYNTAX     InterfaceIndex
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local interface."
	::= { snFdpInterfaceEntry 1 }

snFdpInterfaceFdpEnable OBJECT-TYPE
	SYNTAX     INTEGER { false(0), true(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The flag, whether the Foundry Discovery Protocol
			is currently running on this interface.  It has no
			effect when FDP is disabled (snFdpGlobalRun = FALSE)."
	DEFVAL { true }
	::= { snFdpInterfaceEntry 2 }

snFdpInterfaceCdpEnable OBJECT-TYPE
	SYNTAX     INTEGER { false(0), true(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The flag, whether the Cisco Discovery Protocol
			is currently running on this interface.  It has no
			effect when CDP is disabled (snCdpGlobalRun = FALSE)."
	DEFVAL { true }
	::= { snFdpInterfaceEntry 3 }

--
-- FDP Cache Table
--

snFdpCacheTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF FdpCacheEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"The table for the cached information obtained
			 via receiving FDP/CDP messages."
	::= { snFdpCache 1 }

snFdpCacheEntry OBJECT-TYPE
	SYNTAX     FdpCacheEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snFdpCacheTable, having the information
			received via FDP/CDP on one interface from one device.
			Entries appear when a FDP/CDP advertisement is received
			from a neighbor device.
			Entries disappear when FDP/CDP is disabled on the interface, or globally."
	INDEX      { snFdpCacheIfIndex, snFdpCacheDeviceIndex }
	::= { snFdpCacheTable 1 }

FdpCacheEntry ::= SEQUENCE {
	snFdpCacheIfIndex					InterfaceIndex,
	snFdpCacheDeviceIndex				Integer32,
	snFdpCacheDeviceId					DisplayString,
	snFdpCacheAddressType				INTEGER,
	snFdpCacheAddress					OCTET STRING,
	snFdpCacheVersion					DisplayString,
	snFdpCacheDevicePort				DisplayString,
	snFdpCachePlatform					DisplayString,
	snFdpCacheCapabilities				DisplayString,
	snFdpCacheVendorId					INTEGER,
	snFdpCacheIsAggregateVlan		INTEGER,
	snFdpCacheTagType				Integer32,
	snFdpCachePortVlanMask		OCTET STRING,
	snFdpCachePortTagMode         INTEGER,
	snFdpCacheDefaultTrafficeVlanIdForDualMode  Integer32
}

snFdpCacheIfIndex OBJECT-TYPE
	SYNTAX     InterfaceIndex
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local interface."
	::= { snFdpCacheEntry 1 }

snFdpCacheDeviceIndex OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Identification of a device, which sent FDP/CDP messages"
	::= { snFdpCacheEntry 2 }

snFdpCacheDeviceId OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The Device-ID string as reported in the most recent FDP/CDP
			message.  The zero-length string indicates no Device-ID
			field (TLV) was reported in the most recent FDP/CDP
			message."
	::= { snFdpCacheEntry 3 }

snFdpCacheAddressType OBJECT-TYPE
	SYNTAX     INTEGER { ip(1), ipx(2), appletalk(3) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"An indication of the type of address contained in the
			corresponding instance of snFdpCacheAddress."
	::= { snFdpCacheEntry 4 }

snFdpCacheAddress OBJECT-TYPE
	SYNTAX     OCTET STRING
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The (first) network-layer address of the device
			as reported in the most recent FDP/CDP message
			in the following format:
			  IP address:  4 octets, ip(1)
			  IPX address: 10 octets, ipx(2)
					 First 4-octet as the network number
					 Second 6-octet as the host number
			  Appletalk address: 3 octets, appletalk(3)
					 First 2-octet as the network number
					 Second 1-octet as the host number"
	::= { snFdpCacheEntry 5 }

snFdpCacheVersion OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Version string as reported in the most recent FDP/CDP message. "
	::= { snFdpCacheEntry 6 }


snFdpCacheDevicePort OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The Port-ID string as reported in the most recent FDP/CDP
			message.  This will typically be the value of the ifName
			object (e.g., Ethernet0).  The zero-length string
			indicates no Port-ID field (TLV) was reported in the
			most recent FDP/CDP message."
	::= { snFdpCacheEntry 7 }

snFdpCachePlatform OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The Device's Hardware Platform as reported in the most
			recent FDP/CDP message.  The zero-length string indicates
			that no Platform field (TLV) was reported in the most
			recent FDP/CDP message."
	::= { snFdpCacheEntry 8 }

snFdpCacheCapabilities OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The Device's Functional Capabilities as reported in the
			most recent FDP/CDP message. "
	::= { snFdpCacheEntry 9 }

snFdpCacheVendorId OBJECT-TYPE
	SYNTAX     INTEGER { fdp(1), cdp(2) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Indicates the entry received by either FDP or CDP."
	::= { snFdpCacheEntry 10 }

snFdpCacheIsAggregateVlan OBJECT-TYPE
	SYNTAX     INTEGER { false(0), true(1) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Neighbor device is in aggregated-vlan."
	::= { snFdpCacheEntry 11 }

snFdpCacheTagType OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Neighbor device tag-type."
	::= { snFdpCacheEntry 12 }

snFdpCachePortVlanMask OBJECT-TYPE
	SYNTAX     OCTET STRING
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Neighbor device port VLAN masks in 512-byte octet string."
	::= { snFdpCacheEntry 13 }

snFdpCachePortTagMode OBJECT-TYPE
	SYNTAX     INTEGER { untagged(1), tagged(2), dual(3) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Neighbor device port tag mode"
	::= { snFdpCacheEntry 14 }

snFdpCacheDefaultTrafficeVlanIdForDualMode OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Default traffic vlan id for neighbor device dual-mode port"
	::= { snFdpCacheEntry 15 }

--
-- FDP Global Group
--

snFdpGlobalRun OBJECT-TYPE
	SYNTAX     INTEGER { false(0), true(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The flag, whether the Foundry Discovery Protocol
			is currently running.  FDP entries in snFdpCacheTable are
			deleted when FDP is disabled."
	DEFVAL     { false }
	::= { snFdpGlobal 1 }

snFdpGlobalMessageInterval OBJECT-TYPE
	SYNTAX     INTEGER (5..900)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The interval at which FDP messages are to be generated.
			The default value is 60 seconds."
	DEFVAL     { 60 }
	::= { snFdpGlobal 2 }

snFdpGlobalHoldTime OBJECT-TYPE
	SYNTAX     INTEGER (10..255)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The time for the receiving device holds FDP message.
			The default value is 180 seconds."
	DEFVAL     { 180 }
	::= { snFdpGlobal 3 }

snFdpGlobalCdpRun OBJECT-TYPE
	SYNTAX     INTEGER { false(0), true(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"An indication of whether the Cisco Discovery Protocol
			is currently running.  CDP entries in snFdpCacheTable are
			deleted when CDP is disabled."
	DEFVAL     { false }
	::= { snFdpGlobal 4 }

--
-- FDP Cached Address Entry Table
--
snFdpCachedAddressTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF FdpCachedAddressEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Cached address table from receiving FDP/CDP messages."
	::= { snFdpCachedAddr 1 }

snFdpCachedAddressEntry OBJECT-TYPE
	SYNTAX     FdpCachedAddressEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry (conceptual row) in the snFdpCacheAddressTable,
			containing one cached address from FDP/CDP messages."
	INDEX      { snFdpCachedAddrIfIndex, snFdpCachedAddrDeviceIndex, snFdpCachedAddrDeviceAddrEntryIndex }
	::= { snFdpCachedAddressTable 1 }

FdpCachedAddressEntry ::= SEQUENCE {
	snFdpCachedAddrIfIndex               InterfaceIndex,
	snFdpCachedAddrDeviceIndex           Integer32,
	snFdpCachedAddrDeviceAddrEntryIndex  Integer32,
	snFdpCachedAddrType				     INTEGER,
	snFdpCachedAddrValue				 OCTET STRING
}

snFdpCachedAddrIfIndex OBJECT-TYPE
	SYNTAX     InterfaceIndex
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"The ifIndex value of the local interface."
	::= { snFdpCachedAddressEntry 1 }

snFdpCachedAddrDeviceIndex OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"A unique vlaue for each device from which FDP/CDP messages
			are being received."
	::= { snFdpCachedAddressEntry 2 }

snFdpCachedAddrDeviceAddrEntryIndex OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"A unique vlaue for address entry in device from which FDP/CDP messages
			are being received."
	::= { snFdpCachedAddressEntry 3 }

snFdpCachedAddrType OBJECT-TYPE
	SYNTAX     INTEGER { ip(1), ipx(2), appletalk(3) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"An indication of the type of address contained in the
			corresponding instance of snFdpCacheAddrValue."
	::= { snFdpCachedAddressEntry 4 }

snFdpCachedAddrValue OBJECT-TYPE
	SYNTAX     OCTET STRING
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The network-layer address of the device
			SNMP-agent as reported in the most recent FDP/CDP message
			in the following format:
			  IP address:  4 octets, ip(1)
			  IPX address: 10 octets, ipx(2)
					 First 4-octet as the network number
					 Second 6-octet as the host number
			  Appletalk address: 3 octets, appletalk(3)
					 First 2-octet as the network number
					 Second 1-octet as the host number"
	::= { snFdpCachedAddressEntry 5 }


snMacSecurity   OBJECT IDENTIFIER ::= { snMac 1 }
snPortMacSecurity   		OBJECT IDENTIFIER ::= { snMacSecurity 1 }
snPortMacGlobalSecurity   	OBJECT IDENTIFIER ::= { snMacSecurity 2 }

--
-- Port MAC Security Table
--

snPortMacSecurityTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMacSecurityEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Status of port MAC security on the device's interfaces."
	::= { snPortMacSecurity 1 }

snPortMacSecurityEntry OBJECT-TYPE
	SYNTAX     PortMacSecurityEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMacSecurityTable"
	INDEX      { snPortMacSecurityIfIndex,
					 snPortMacSecurityResource,
					 snPortMacSecurityQueryIndex
				  }
	::= { snPortMacSecurityTable 1 }

PortMacSecurityEntry ::= SEQUENCE {
	snPortMacSecurityIfIndex                    Unsigned32,
	snPortMacSecurityResource                 INTEGER,
	snPortMacSecurityQueryIndex              Unsigned32,
	snPortMacSecurityMAC                       MacAddress,
	snPortMacSecurityAgeLeft                  Unsigned32,
	snPortMacSecurityShutdownStatus       INTEGER,
	snPortMacSecurityShutdownTimeLeft   Unsigned32,
	snPortMacSecurityVlanId                    Unsigned32
}

snPortMacSecurityIfIndex     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local Ethernet interface on
			which MAC security is configured."
	::= {snPortMacSecurityEntry 1}

snPortMacSecurityResource OBJECT-TYPE
	SYNTAX     INTEGER { local(1), shared(2) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The MAC address was secured using local or shared resources."
	::= {snPortMacSecurityEntry 2}

snPortMacSecurityQueryIndex     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Entry index within the given resource of local Ethernet interface on
			which MAC security is configured."
	::= {snPortMacSecurityEntry 3}

snPortMacSecurityMAC OBJECT-TYPE
	SYNTAX     MacAddress
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The secure MAC address for this interface."
	::= {snPortMacSecurityEntry 4}

snPortMacSecurityAgeLeft OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The number of minutes the MAC address will remain secure
			before being aged out. 0 means no aging."
	::= {snPortMacSecurityEntry 5}

snPortMacSecurityShutdownStatus OBJECT-TYPE
	SYNTAX     INTEGER { up(1), down(2) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Interface up/down status."
	::= {snPortMacSecurityEntry 6}

snPortMacSecurityShutdownTimeLeft OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"If snPortMacSecurityShutdownStatus is up(1), this value will be 0.
			If snPortMacSecurityShutdownStatus is down(2), this gives
			the number of seconds before this interface is enabled again.
			In the later case, 0 means interface is permanently down."
	::= {snPortMacSecurityEntry 7}

snPortMacSecurityVlanId OBJECT-TYPE
	SYNTAX     Unsigned32 (1..65535)
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The vlan membership of this interface."
	::= {snPortMacSecurityEntry 8}



--
-- Port MAC Security Module Statistics Table
--

snPortMacSecurityModuleStatTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMacSecurityModuleStatEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Port MAC security statistics on each module."
	::= { snPortMacSecurity 2 }

snPortMacSecurityModuleStatEntry OBJECT-TYPE
	SYNTAX     PortMacSecurityModuleStatEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMacSecurityModuleStatTable"
	INDEX      { snPortMacSecurityModuleStatSlotNum }
	::= { snPortMacSecurityModuleStatTable 1 }

PortMacSecurityModuleStatEntry ::= SEQUENCE {
	snPortMacSecurityModuleStatSlotNum					Integer32,
	snPortMacSecurityModuleStatTotalSecurityPorts		Unsigned32,
	snPortMacSecurityModuleStatTotalMACs				Unsigned32,
	snPortMacSecurityModuleStatViolationCounts			Unsigned32,
	snPortMacSecurityModuleStatTotalShutdownPorts		Unsigned32
}

snPortMacSecurityModuleStatSlotNum 		OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The slot number of the port security device module."
	::= {snPortMacSecurityModuleStatEntry 1}

snPortMacSecurityModuleStatTotalSecurityPorts     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of Ethernet interfaces on which MAC security is configured in this module."
	::= {snPortMacSecurityModuleStatEntry 2}

snPortMacSecurityModuleStatTotalMACs     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of port MAC security MAC addresses are learned or configured in this module."
	::= {snPortMacSecurityModuleStatEntry 3}

snPortMacSecurityModuleStatViolationCounts     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of counts of violation are collected in this module."
	::= {snPortMacSecurityModuleStatEntry 4}

snPortMacSecurityModuleStatTotalShutdownPorts     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of Ethernet interfaces are shutted down due to security violation in this module."
	::= {snPortMacSecurityModuleStatEntry 5}

--
-- Port MAC Security Interface Table
--

snPortMacSecurityIntfContentTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMacSecurityIntfContentEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Port MAC security statistics on each Ethernet Interface."
	::= { snPortMacSecurity 3 }

snPortMacSecurityIntfContentEntry OBJECT-TYPE
	SYNTAX     PortMacSecurityIntfContentEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMacSecurityIntfContentTable"
	INDEX      { snPortMacSecurityIntfContentIfIndex }
	::= { snPortMacSecurityIntfContentTable 1 }

PortMacSecurityIntfContentEntry ::= SEQUENCE {
	snPortMacSecurityIntfContentIfIndex					InterfaceIndex,
	snPortMacSecurityIntfContentSecurity   				INTEGER,
	snPortMacSecurityIntfContentViolationType			INTEGER,
	snPortMacSecurityIntfContentShutdownTime			Unsigned32,
	snPortMacSecurityIntfContentShutdownTimeLeft		Unsigned32,
	snPortMacSecurityIntfContentAgeOutTime				Unsigned32,
	snPortMacSecurityIntfContentMaxLockedMacAllowed		Unsigned32,
	snPortMacSecurityIntfContentTotalMACs				Unsigned32,
	snPortMacSecurityIntfContentViolationCounts			Unsigned32
}

snPortMacSecurityIntfContentIfIndex OBJECT-TYPE
	SYNTAX  InterfaceIndex
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"In order to identify a particular interface, this
		object shall identify the instance of the ifIndex
		object, defined in RFC 2863."
	::= { snPortMacSecurityIntfContentEntry 1 }

snPortMacSecurityIntfContentSecurity OBJECT-TYPE
	SYNTAX     INTEGER { disable(0), enable(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"Port security for this interface can be either disabled or enabled."
	::= {snPortMacSecurityIntfContentEntry 2}

snPortMacSecurityIntfContentViolationType OBJECT-TYPE
	SYNTAX     INTEGER { shutdown(0), restrict(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"Port security violation type for this interface is shutdown or restrict."
	::= {snPortMacSecurityIntfContentEntry 3}

snPortMacSecurityIntfContentShutdownTime OBJECT-TYPE
	SYNTAX     Unsigned32 (0..1440)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"If snPortMacSecurityIntfContentViolationType is shutdown(1),
			this value gives the number of seconds this interface is shut down when violation occurs.
			In the shutdown(1) case, 0 means interface is permanently down.
			If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0."
	::= {snPortMacSecurityIntfContentEntry 4}

snPortMacSecurityIntfContentShutdownTimeLeft OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"If snPortMacSecurityIntfContentViolationType is shutdown(1),
			whether this interface has been shut down due to a security violation
			and the value gives the number of seconds before this interface is enabled again.
			If snPortMacSecurityIntfContentViolationType is restrict(2), this value will be always 0."
	::= {snPortMacSecurityIntfContentEntry 5}

snPortMacSecurityIntfContentAgeOutTime OBJECT-TYPE
	SYNTAX     Unsigned32 (0..1440)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The amount of time, in minutes, MAC addresses learned on this interface will remain secure.
			It allows configurable values 0-1440.  0 means no aging permanently."
	::= {snPortMacSecurityIntfContentEntry 6}

snPortMacSecurityIntfContentMaxLockedMacAllowed OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"Maximum number of security MAC addresses can be locked to this interface."
	::= {snPortMacSecurityIntfContentEntry 7}

snPortMacSecurityIntfContentTotalMACs     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of port MAC security MAC addresses are locked in this interface."
	::= {snPortMacSecurityIntfContentEntry 8}

snPortMacSecurityIntfContentViolationCounts     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The totol number of counts of violation are collected in this interface."
	::= {snPortMacSecurityIntfContentEntry 9}

--
-- Port MAC Security Interface MAC Table
--

snPortMacSecurityIntfMacTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMacSecurityIntfMacEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Status of port MAC security on the device's interfaces."
	::= { snPortMacSecurity 4 }

snPortMacSecurityIntfMacEntry OBJECT-TYPE
	SYNTAX     PortMacSecurityIntfMacEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMacSecurityIntfMacTable"
	INDEX      { snPortMacSecurityIntfMacIfIndex,
					snPortMacSecurityIntfMacAddress
					}
	::= { snPortMacSecurityIntfMacTable 1 }

PortMacSecurityIntfMacEntry ::= SEQUENCE {
	snPortMacSecurityIntfMacIfIndex			Integer32,
	snPortMacSecurityIntfMacAddress			MacAddress,
	snPortMacSecurityIntfMacVlanId			Unsigned32,
	snPortMacSecurityIntfMacRowStatus 		INTEGER
}

snPortMacSecurityIntfMacIfIndex     OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local Ethernet interface on
			which MAC security is configured."
	::= {snPortMacSecurityIntfMacEntry 1}

snPortMacSecurityIntfMacAddress OBJECT-TYPE
	SYNTAX     MacAddress
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The secure MAC address for this local Ethernet interface on
			which the secure MAC Address is configured and/or learned.
			The maximum number of the secure MAC Addresses is restricted
			by the snPortMacSecurityIntfContentMaxLockedMacAllowed."
	::= {snPortMacSecurityIntfMacEntry 2}

snPortMacSecurityIntfMacVlanId OBJECT-TYPE
	SYNTAX     Unsigned32 (0..65535)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The vlan membership of this interface, zero means don't care."
	::= {snPortMacSecurityIntfMacEntry 3}

snPortMacSecurityIntfMacRowStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		other(1),
		valid(2),
		delete(3),
		create(4)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"This object is used to create and
		delete row in the table and control
		if they are used. The values
		that can be written are:
		  delete(3)...deletes the row
		  create(4)...creates a new row

		If the row exists, then a SET with
		value of create(4) returns error
		'badValue'. Deleted rows go away
		immediately. The following values
		can be returned on reads:
		  noSuch(0)...no such row
		  other(1)....some other case
		  valid(2)....the row exists and is valid"
	::= {snPortMacSecurityIntfMacEntry 4}


--
-- Port MAC Security Autosave MAC Table
--

snPortMacSecurityAutosaveMacTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMacSecurityAutosaveMacEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Autosave MAC addresses of port MAC security on the device's interfaces."
	::= { snPortMacSecurity 5 }

snPortMacSecurityAutosaveMacEntry OBJECT-TYPE
	SYNTAX     PortMacSecurityAutosaveMacEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMacSecurityAutosaveMacTable"
	INDEX      { snPortMacSecurityAutosaveMacIfIndex,
				 snPortMacSecurityAutosaveMacResource,
				 snPortMacSecurityAutosaveMacQueryIndex
					}
	::= { snPortMacSecurityAutosaveMacTable 1 }

PortMacSecurityAutosaveMacEntry ::= SEQUENCE {
	snPortMacSecurityAutosaveMacIfIndex		Integer32,
	snPortMacSecurityAutosaveMacResource	INTEGER,
	snPortMacSecurityAutosaveMacQueryIndex	Unsigned32,
	snPortMacSecurityAutosaveMacAddress		MacAddress
}

snPortMacSecurityAutosaveMacIfIndex     OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local Ethernet interface on
			which MAC security is configured."
	::= {snPortMacSecurityAutosaveMacEntry 1}

snPortMacSecurityAutosaveMacResource OBJECT-TYPE
	SYNTAX     INTEGER { local(1), shared(2) }
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The MAC address was autosaved using local or shared resources."
	::= {snPortMacSecurityAutosaveMacEntry 2}

snPortMacSecurityAutosaveMacQueryIndex     OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"Entry index within the given resource of local Ethernet interface on
			which MAC security is autosaved."
	::= {snPortMacSecurityAutosaveMacEntry 3}

snPortMacSecurityAutosaveMacAddress OBJECT-TYPE
	SYNTAX     MacAddress
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The secure MAC address for this local Ethernet interface on
			which the secure MAC Address is autosaved."
	::= {snPortMacSecurityAutosaveMacEntry 4}



-- Port MAC Global Security MIB Group

snPortMacGlobalSecurityFeature OBJECT-TYPE
	SYNTAX     INTEGER { disable(0), enable(1) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"Port security for this device can be either disabled or enabled."
	::= { snPortMacGlobalSecurity 1 }

snPortMacGlobalSecurityAgeOutTime OBJECT-TYPE
	SYNTAX     Unsigned32 (0..1440)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The amount of time, in minutes, MAC addresses learned on this device will remain secure.
			It allows configurable values in the range of 0-1440.  0 means no aging permanently."
	::= { snPortMacGlobalSecurity 2 }

snPortMacGlobalSecurityAutosave OBJECT-TYPE
	SYNTAX     Unsigned32
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"The port security autosave value for this device. It allows
	configurable values 0 and also in the range of 15-1440. The value 0 means no autosave."
	::= { snPortMacGlobalSecurity 3 }


--
-- Port Monitor Table
--

snPortMonitorTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF PortMonitorEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"Status of port monitoring on the device's interfaces."
	::= { snPortMonitor 1 }

snPortMonitorEntry OBJECT-TYPE
	SYNTAX     PortMonitorEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry in the snPortMonitorTable"
	INDEX      { snPortMonitorIfIndex }
	::= { snPortMonitorTable 1 }

PortMonitorEntry ::= SEQUENCE {
	snPortMonitorIfIndex                    InterfaceIndex,
	snPortMonitorMirrorList                 DisplayString
}

snPortMonitorIfIndex OBJECT-TYPE
	SYNTAX     InterfaceIndex
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"ifIndex value of the local interface on which
			monitoring is configuerd."
	::= { snPortMonitorEntry 1 }

snPortMonitorMirrorList OBJECT-TYPE
	 SYNTAX  DisplayString
	 MAX-ACCESS  read-write
	 STATUS  current
	 DESCRIPTION
			 "Lists the monitoring configuration of this port.
			 The value is a space delimited sequence of ifIndex of mirror port
			 and monitor mode. The values for mode can be -
			 0 -  off, 1 - input, 2 - output, 3 - both
			 Eg. '65 2 66 1' means send the output traffic to port 2/1 and
			 input traffic to port 2/2.
			  To turn off a mirror use monitor mode of 0 (off) in the list."
	 ::= { snPortMonitorEntry 2 }

END